Ti3C2MXene: a promising microwave absorbing material

Electrochemically-Switched Microwave Response of MXene in Organic Electrolyte

The increasingly complex electromagnetic (EM) environment necessitates advanced electrically controllable electromagnetic interference (EMI) shielding materials that can adapt to varying EM conditions. This study develops a flexible electrochemically tunable EMI shielding device based on ultrathin Ti3C2Tx MXene films, exhibiting reversible shielding effectiveness (SE) modulation from 18.9 to 26.2 dB in X band at 0.1 and -1.5 V. Unlike the previously reported mechanism relying on interlayer spacing adjustments, the work leverages transformations of charging state and surface chemistry for tunability during the electrochemical process. The Ti3C2Tx flake size is also evidenced to play a crucial role, with smaller flakes offering higher absorption modulation despite lower SE modulation, enabling the device with high designability. When integrated with Salisbury screen structure, the device achieves adjustable absorption from 93.560% at 0.1 V to 99.996% at -1 V, showing a tunable reflection suppression ratio up to 32 dB with an effective bandwidth of 4.2 GHz. Additionally, incorporating resonant cavity structure enables absorption-dominated (over 90%) microwave-responsive switching at 0.1 and -1.5 V. This work highlights significant potential of adaptive EMI shielding materials for applications in smart electronic protection, EM switch, and radar camouflage.

Enhancing the Photocatalytic Activity of Lead-Free Halide Perovskite Cs3Bi2I9 by Compositing with Ti3C2 MXene

In recent years, halide perovskite materials have become widely used in solar cells, photovoltaics, and LEDs, as well as photocatalysis. Lead-free perovskite Cs3Bi2I9 has been demonstrated as an effective photocatalyst; however, the fast recombination of the photogenerated carriers hinders further improvements of its photocatalytic activity. In this work, Ti3C2 was composited with Cs3Bi2I9 to promote the transfer and separation of photogenerated carriers, and thus the pollutant degradation efficiency was effectively improved. The visible-light photocatalytic reduction of Cs3Bi2I9/Ti3C2 on rhodamine B (RhB), methylene blue (MB), and malachite green (MG) was as high as 97.3%, 96%, and 98.8%, respectively, improvements of almost 31.2%, 37.8%, and 37.2% compared to that of sole Cs3Bi2I9. Our study provides a simple way to enhance the photocatalytic activity of lead-free halide perovskites.

Recent advances in hydrogel-based flexible strain sensors for harsh environment applications

Flexible strain sensors are broadly investigated in electronic skins and human-machine interaction due to their light weight, high sensitivity, and wide sensing range. Hydrogels with unique three-dimensional network structures are widely used in flexible strain sensors for their exceptional flexibility and adaptability to mechanical deformation. However, hydrogels often suffer from damage, hardening, and collapse under harsh conditions, such as extreme temperatures and humidity levels, which lead to sensor performance degradation or even failure. In addition, the failure mechanism in extreme environments remains unclear. In this review, the performance degradation and failure mechanism of hydrogel flexible strain sensors under various harsh conditions are examined. Subsequently, strategies towards the environmental tolerance of hydrogel flexible strain sensors are summarized. Finally, the current challenges of hydrogel flexible strain sensors in harsh environments are discussed, along with potential directions for future development and applications.

Concentration-Dependent Effects of MXene Nanocomposite-Loaded Carboxymethyl Cellulose on Wound Healing

Nanoparticles (NPs) have emerged as a promising solution for many biomedical applications. Although not all particles have antimicrobial or regenerative properties, certain NPs show promise in enhancing wound healing by promoting tissue regeneration, reducing inflammation, and preventing infection. Integrating various NPs can further enhance these effects. Herein, the zinc oxide (ZnO)-MXene-Ag nanocomposite was prepared, and the conjugation of its three components was confirmed through scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) mapping analysis. In vitro analysis using the agar well diffusion technique demonstrated that ZnO-MXene-Ag nanocomposite exhibited high antimicrobial efficacy, significantly inhibiting Escherichia coli, Salmonella, and Candida albicans, and showing enhanced potency when combined with tetracycline, resulting in a 2.6-fold increase against Staphylococcus and a 2.4-fold increase against Pseudomonas. The efficacy of nanocomposite-loaded carboxymethyl cellulose (CMC) gel on wound healing was investigated using varying concentrations (0, 1, 5, and 10 mg/mL). Wound healing was monitored over 21 days, with results indicating that wounds treated with 1 mg/mL ZnO-MXene-Ag gel exhibited superior healing compared to the control group (0 mg/mL), with significant improvements noted from Day 3 onward. Conversely, higher concentrations (10 mg/mL) resulted in reduced healing efficiency, particularly notable on Day 15. In conclusion, the ZnO-MXene-Ag nanocomposite-loaded CMC gel is a promising agent for enhanced wound healing and antimicrobial applications. These findings highlight the importance of optimizing NP concentration to maximize therapeutic benefits while minimizing potential cytotoxicity.

HF-free microwave-assisted synthesis of MXene as an electrocatalyst for hydrogen evolution in alkaline media

MXenes, characterized by their robustness, flexibility, and large surface-to-volume ratio facilitating efficient energy transfer with fast response times, have emerged as promising electrocatalysts for hydrogen generation through electrochemical water-splitting. However, the conventional synthetic route to MXenes typically involves the use of hydrofluoric acid (HF) to obtain MXenes with terminal F-functional groups. Unfortunately, these fluorine groups can negatively impact the electrocatalytic performance of MXenes. Moreover, HF is highly toxic, necessitating the development of more environmentally friendly synthetic methods. In response to these challenges, we have developed a novel HF-free microwave-assisted synthesis approach for MXenes. This method harnesses the benefits of uniform heating, homogeneous nucleation, and rapid crystal development, resulting in MXene crystallites with limited size. Importantly, our microwave-assisted approach utilizes a fluoride-free, less hazardous etchant as compared to HF for the synthesis and functionalization of MXene. The as-obtained MXene exhibits significantly improved performance towards the electrochemical hydrogen evolution reaction in alkaline media. Specifically, it demonstrates an overpotential of 140 mV at a current density of 10 mA cm-2 and a Tafel slope of 84 mV dec-1. These results highlight the potential of our HF-free microwave-assisted synthesis approach for producing high-quality MXenes with enhanced electrocatalytic activity for hydrogen generation.

Improved electrochemical reduction of CO2 to syngas with a highly exfoliated Ti3C2Tx MXene-gold composite

Transforming carbon dioxide (CO2) into valuable chemicals via electroreduction presents a sustainable and viable approach to mitigating excess CO2 in the atmosphere. This report provides fresh insights into the design of a new titanium-based MXene composite as a catalyst for the efficient conversion of CO2 in a safe aqueous medium. Despite its excellent electrocatalytic activity towards CO2 reduction and high selectivity for CO production, the high cost of Au and the decline in catalytic activity on a larger scale hinder its large-scale CO2 conversion applications. In this research, we have successfully prepared an Au/Ti3C2Tx composite and tested its catalytic activity in the electrochemical CO2 reduction reaction (ECRR). The as-prepared composite features strong interactions between gold atoms and the MXene support, achieved through the formation of metal-oxygen/carbon bonds. The Au/Ti3C2Tx electrode demonstrated a significant current density of 17.3 mA cm-2 at a potential of -0.42 V vs. RHE, in a CO2 saturated atmosphere (faradaic efficiency: CO = 48.3% and H2 = 25.6%). Nyquist plots further indicated a reduction in the charge-transfer resistance of the Au/Ti3C2Tx layer, signifying rapid charge transfer between the Au and Ti3C2Tx. Furthermore, it is known that liquid crossover through the Gas Diffusion Electrode (GDE) significantly improves CO2 diffusion to catalyst active sites, thereby enhancing CO2 conversion efficiency. The goal of this work is to design an interface between metal and MXene so that CO2 can be electroreduced to fuels and other useful chemical compounds with great selectivity.

L-Cysteine functionalized magnetite nanoparticle adorned Ti3C2-MXene nanohybrid based screen printed immunosensor for oral cancer biomarker detection

Nanohybrid based non-invasive biosensing platforms are emerging as promising alternatives to detect biomarkers in complex and diverse bio-fluids toward ultrasensitive point-of-care diagnostics. Herein, we report the development of a highly sensitive, facile, non-invasive, label free, affordable, and innovative electrochemical screen printed immunosensor for identifying CYFRA 21-1, an established and crucial biomarker for oral cancer. Until now, no work has been reported utilizing a titanium carbide Ti3C2 MXene nanosheet and L-cysteine (L-Cyst) functionalized magnetite nanoparticle (MNPs) nanohybrid based immunosensor for electrochemical detection of CYFRA 21-1. The L-Cyst@MNPs/Ti3C2-MXene nanohybrid was synthesized via the co-precipitation method and later deposited on a gold screen printed electrode (GSPE) offering enhanced surface area and electrochemical properties. The nanohybrid modified GSPE was then surface immobilized with monoclonal antibodies (anti-CYFRA-21-1) to fabricate an anti-CYFRA-21-1/L-Cyst@MNPs/Ti3C2-MXene/GSPE immunoelectrode and the non-specific locations of the immunoelectrode were covered with bovine serum albumin (BSA). The spectroscopic, morphological, and structural analyses of the synthesized nanohybrid and the fabricated electrodes were performed using different analytical techniques. The electrochemical studies of modified electrodes were evaluated using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV). The fabricated BSA/anti-CYFRA-21-1/L-Cyst@MNPs/Ti3C2-MXene/GSPE immunosensor has shown an excellent limit of detection of 0.023 ng mL-1, a linear detection range of (0.5-30) ng mL-1, a sensitivity of 277.28 μA (ng mL-1)-1 cm-2 and a lower limit of quantification of 0.618 ng mL-1 for electrochemical CYFRA 21-1 determination. Hence, this L-Cyst@MNPs/Ti3C2-MXene nanohybrid could also be explored as a potential candidate for determining other cancer biomarkers.

Molecularly Imprinted Polymer Biosensor Based on Nitrogen-Doped Electrochemically Exfoliated Graphene/Ti3 CNTX MXene Nanocomposite for Metabolites Detection

Rapid and accurate quantification of metabolites in different bodily fluids is crucial for a precise health evaluation. However, conventional metabolite sensing methods, confined to centralized laboratory settings, suffer from time-consuming processes, complex procedures, and costly instrumentation. Introducing the MXene/nitrogen-doped electrochemically exfoliated graphene (MXene@N-EEG) nanocomposite as a novel biosensing platform in this work addresses the challenges associated with conventional methods, leveraging the concept of molecularly imprinted polymers (MIP) enables the highly sensitive, specific, and reliable detection of metabolites. To validate our biosensing technology, we utilize agmatine as a significant biologically active metabolite. The MIP biosensor incorporates electrodeposited Prussian blue nanoparticles as a redox probe, facilitating the direct electrical signaling of agmatine binding in the polymeric matrix. The MXene@N-EEG nanocomposite, with excellent metal conductivity and a large electroactive specific surface area, effectively stabilizes the electrodeposited Prussian blue nanoparticles. Furthermore, increasing the content of agmatine-imprinted cavities on the electrode enhances the sensitivity of the MIP biosensor. Evaluation of the designed MIP biosensor in buffer solution and plasma samples reveals a wide linear concentration range of 1.0 nM-100.0 μM (R2 = 0.9934) and a detection limit of 0.1 nM. Notably, the developed microfluidic biosensor offers low cost, rapid response time to the target molecule (10 min of sample incubation), good recovery results for detecting agmatine in plasma samples, and acceptable autonomous performance for on-chip detection. Moreover, its high reliability and sensitivity position this MIP-based biosensor as a promising candidate for miniaturized microfluidic devices with the potential for scalable production for point-of-care applications.

Water-Triggered Self-Healing of Ti3C2Tx MXene Standalone Electrodes: Systematic Examination of Factors Affecting the Healing Process

MXenes, with their remarkable attributes, stand at the forefront of diverse applications. However, the challenge remains in sustaining their performance, especially concerning Ti3C2Tx MXene electrodes. Current self-healing techniques, although promising, often rely heavily on adjacent organic materials. This study illuminates a pioneering water-initiated self-healing mechanism tailored specifically for standalone MXene electrodes. Here, both water and select organic solvents seamlessly mend impaired regions. Comprehensive evaluations around solvent types, thermal conditions, and substrate nuances underline water's unmatched healing efficacy, attributed to its innate ability to forge enduring hydrogen bonds with MXenes. Optimal healing environments range from ambient conditions to a modest 50 °C. Notably, on substrates rich in hydroxyl groups, the healing efficiency remains consistently high. The proposed healing mechanism encompasses hydrogen bonding formation, capillary action-induced expansion of interlayer spacing, solvent lubrication, Gibbs free energy minimizing MXene nanosheet rearrangement, and solvent evaporation-triggered MXene layer recombination. MXenes' resilience is further showcased by their electrical revival from profound damages, culminating in the crafting of Joule-heated circuits and heaters.

Progress in microwave absorbing materials: A critical review

Microwave-absorbing materials play a significant role in various applications that involve the attenuation of electromagnetic radiation. This critical review article provides an overview of the progress made in the development and understanding of microwave-absorbing materials. The interaction between electromagnetic radiation and absorbing materials is explained, with a focus on phenomena such as multiple reflections, scattering, and polarizations. Additionally, types of losses that affect the performance of microwave absorbers are also discussed, including dielectric loss, conduction loss, relaxation loss, magnetic loss, and morphological loss. Each of these losses has different implications for the effectiveness of microwave absorbers. Further, a detailed review is presented on various types of microwave absorbing materials, including carbonaceous materials, conducting polymers, magnetic materials, metals and their composites, 2D materials (such as MXenes and 2D-transition metal dichalcogenides), biomass-derived materials, carbides, sulphides, phosphides, high entropy (HE) materials and metamaterials. The characteristics, advantages, and limitations of each material are examined. Overall, this review article highlights the progress achieved in the field of microwave-absorbing materials. It underlines the importance of optimizing different types of losses to enhance the performance of microwave absorbers. The review also recognizes the potential of emerging materials, such as 2D materials and high entropy materials, in further advancing microwave-absorbing properties.

Removal of heavy metals from wastewater by aerogel derived from date palm waste

Cellulose that has been sourced from date palm leaves as a primary component was utilised. This cellulose served as the foundational material for the development of an aerogel composite. During this process, MXene (Ti3C2Tx) played a pivotal role in enhancing the overall composition of the aerogel. To ensure the stability and durability of the resulting aerogel structure, calcium ions were introduced to the mix. These ions facilitated the cross-linking process of sodium alginate molecules, ultimately leading to the formation of calcium alginate. This cross-linking step is crucial for the enhanced mechanical and chemical stability of the aerogel. Incorporating alginate and Ti3C2Tx into the cellulose aerogel enhanced its structural integrity in aqueous conditions and increased its adsorption capacity. When evaluated with synthetic wastewater, this composite exhibited remarkable adsorption capacities of 72.9, 114.4, 92.9, and 123.9 mg/g for As, Cd, Ni, and Zn ions, respectively. A systematic study was carried out to see the effect of various parameters, including contact time, MXene concentration, pH, and temperature on the adsorption of these elements. Peak adsorption was achieved at 60 min, favoring a pH range between 6 and 8 and exhibited optimal sorption efficiency at lower temperatures. The adsorption kinetics adhered closely to a pseudo-second-order, while the Freundlich model adeptly described the adsorption isotherms. An interesting result of this research was the aerogel's regenerative potential. After undergoing a basic acid treatment, the MXene/cellulose/alginate aerogel composite could be restored and reused for up to three cycles, all while maintaining its core performance capabilities even after the rigorous cross-linking processes. In three consecutive cycles, the removal percentages for As, Cd, Ni, and Zn were 48.15%, 80.38%, 56.51%, and 86.12% in cycle 1; 37.35%, 65.63%, 45.97%, and 78.42% in cycle 2; and 28.60%, 56.22%, 34.70%, and 65.83% in cycle 3, respectively. The composite was tested in conditions resembling seawater salinity. Impressively, the aerogel continued to demonstrate a significant ability to adsorb metals, reinforcing its potential utility in real-world aquatic scenarios. These findings suggest that the composite aerogel, integrating MXene, cellulose, and alginate, is an effective medium for the targeted removal of heavy metals from aquatic environments.

Functionalization of Shorea faguetiana biochar using Fe2O3 nanoparticles and MXene for rapid removal of methyl blue and lead from both single and binary systems

The synthesis of polymeric magnetic composites is a promising strategy for the rapid and efficient treatment of wastewater. Lead and methyl blue are extremely hazardous to living organisms. The sorption of Pb2+ and the dye methyl blue (MB) by biochar is an ecologically sustainable method to remediate this type of water pollution. We functionalized Shorea faguetiana biochar with Fe2O3 and MXene, resulting in Fe2O3/BC/MXene composites with an efficient, rapid, and selective adsorption performance. Based on X-ray photoelectron and Fourier transform infrared spectrometry, we found that the Fe2O3/BC/MXene composites had an increased number of surface functional groups (F-, C[double bond, length as m-dash]O, CN, NH, and OH-) compared with the original biochar. The batch sorption findings showed that the maximum sorption capacities for Pb2+ and MB at 293 K were 882.76 and 758.03 mg g-1, respectively. The sorption phenomena obeyed a pseudo-second-order (R2 = 1) model and the Langmuir isotherm. There was no competition between MB and Pb2+ in binary solutions, indicating that MB and Pb2+ did not influence each other as a result of their different adsorption mechanisms (electrostatic interaction for Pb2+ and hydrogen bonding for MB). This illustrates monolayer sorption on the Fe2O3/BC/MXene composite governed by chemical adsorption. Thermodynamic investigations indicated that the sorption process was spontaneous and exothermic at 293-313 K, suggesting that it is feasible for practical applications. Fe2O3/BC/MXene can selectively adsorb Pb2+ ions and MB from wastewater containing multiple interfering metal ions. The sorption capacities were still high after five reusability experiments. This work provides a novel Fe2O3/BC/MXene composite for the rapid and efficient removal of Pb2+ and MB.

Atomically thin MXene/WSe2Schottky heterojunction towards enhanced photogenerated charge carrier

Two-dimensional materials garner increasing interest in next-generation electronics and optoelectronic devices due to their atomic-thin nature and distinctive physical properties. Building on these advances, we present the successful synthesis of a heterostructure composed of the semi-metallic Ti3C2-MXene and the semiconducting WSe2, in which the atomic layers are vertically aligned. The wet impregnation method effectively synthesizes an atomically thin Ti3C2-MXene/WSe2heterostructure characterized by atomic force microscopy, Raman and time-resolved photoluminescence (TRPL) analysis. In addition, the current-voltage characteristics at the heterostructure reveal the Schottky junction probed by the scanning tunnelling microscopy and the conductive atomic force microscopy tip. The Schottky heterojunction also exhibits enhanced photocatalytic properties by improving the photogenerated charge carriers and inhibiting recombination. This work demonstrates the unique 2D-2D Ti3C2-MXene/WSe2vertical heterojunction possesses superior photon trapping ability and can efficiently transport photogenerated charge carriers to the reaction sites to enhance photocatalysis performance.

Elucidation of the synergistic effects of 3d metal (M = Cu, Co, and Ni) dopants and terminations (T = -O- and -OH) of Ti3C2Tx MXenes for urea adsorption ability via DFT calculations and experiments

Dialysis is an artificial process to remove excess urea toxins from the body through adsorption or conversion. Urea adsorption by emergent 2D materials such as MXenes is one probable approach. Based on density functional theory (DFT) studies, the surface of Ti3C2Tx (T = -O- and -OH) MXenes is not optimum for urea adsorption. Therefore, functionalization with 3d metal dopants (Cu, Co, and Ni) is proposed to improve their urea adsorption ability. DFT calculations indicate that oxygen-terminated Ti3C2O2 has a much better urea adsorption ability when doped with Cu, Co, and Ni, with adsorption energy (Eads) values of -2.11 eV, -1.90 eV and -1.72 eV, respectively. These adsorption energies are much more favourable than that of the undoped one (Eads = -0.52 eV). To verify the calculation results, MILD Ti3C2Tx, or MXenes synthesized via the safer and easier minimally intensive layer delamination (MILD) method, were utilized to simulate Ti3C2O2 since they have -O- termination as the dominant species. Experimentally, the adsorption studies found that low concentration of Cu, Co, and Ni on MILD Ti3C2Tx showed a urea removal efficiency of 21.9%, 6.0% and 0.2%, respectively, much better than 0% removal efficiency of unfunctionalized Ti3C2Tx. Therefore, both DFT calculations and experiments showed that various metal functionalized MXenes have a similar trend for urea adsorption, highlighting the feasibility of using the computational approach to predict urea adsorption and further opening a new promising direction for the urea adsorption. Finally, this study is also the first to examine synergistic effects of metal dopants and surface terminations on MXenes for urea adsorption.

Highly Permeable Sulfonated Polydopamine Integrated MXene Membranes for Efficient Surfactant-Stabilized Oil-in-Water Separation

MXene is an incredibly promising two-dimensional material with immense potential to serve as a high-performing separating or barrier layer to develop advanced membranes. Despite the significant progress made in MXene membranes, two major challenges still exist: (i) effectively stacking MXene nanosheets into defect-free membranes and (ii) the high fouling tendency of MXene-based membranes. To address these issues, we employed sulfonated polydopamine (SPD), which simultaneously serves as a binding agent to promote the compact assembling of Ti3C2Tx MXenes (MX) nanosheets and improves the antifouling properties of the resulting sulfonated polydopamine-functionalized MX (SPDMX) membranes. The SPDMX membrane was tested for challenging surfactant-stabilized oil-in-water separation with an impressive efficiency of 98%. Moreover, an ultrahigh permeability of 1620 LMH/bar was also achieved. The sulfonation of PD helps in improving the antifouling characteristics of SPDMX by developing a strong hydration layer and enhancing the oleophobicity of the membrane. The underwater SPDMX membrane appeared superoleophobic with an oil contact angle of 153°, whereas the ceramic membrane exhibited an oil contact angle of 137°. The SPDMX membranes showed an improved flux recovery (31%) compared to the nonsulfonated counterpart. This work highlights the appropriate functionalization of MXene as a promising approach to developing MXene membranes with high permeation flux and better antifouling characteristics for oily wastewater treatment.

Preclinical safety assessment of red emissive gold nanocluster conjugated crumpled MXene nanosheets: a dynamic duo for image-guided photothermal therapy

Red emissive gold nanoclusters have potential as biological fluorescent probes, but lack sufficient light-to-heat conversion efficiency for photothermal therapy (PTT). MXene nanomaterials, on the other hand, have shown promise in PTT due to their strong near-infrared absorption abilities, but their instability caused by restacking of the sheets can decrease their available surface area. One approach to address this issue is to design sheets with wrinkles or folds. However, the crumpled or 3D MXene materials reported in the literature are actually aggregates of multiple nanosheets rather than a single sheet that is folded. In this study, a modified method for crumpling a single MXene sheet and further conjugating it with red emissive gold nanoclusters and folic acid was developed. A detailed in vitro toxicity study was performed in various cell lines and cellular uptake in cancer cells was studied using AFM to understand its interaction at the nano-bio interface. The material also demonstrated excellent utility as a bioimaging and PTT agent in vitro, with its high fluorescence allowing bioimaging at a lower concentration of 12 μg mL^-1 and a photothermal conversion efficiency of 43.51%. In vitro analyses of the cell death mechanisms induced by PTT were conducted through studies of apoptosis, cell proliferation, and ROS production. In vivo acute toxicity tests were conducted on male and female Wistar rats through oral and intravenous administration (20 mg kg^-1 dose), and toxicity was evaluated using various measures including body weight, hematology, serum biochemistry, and H&E staining. The findings from these studies suggest that the MXene gold nanoconjugate could be useful in a range of biomedical applications, with no observed toxicity following either oral or intravenous administration.

In Situ Synthesis of C-N@NiFe2O4@MXene/Ni Nanocomposites for Efficient Electromagnetic Wave Absorption at an Ultralow Thickness Level

Recently, the development of composite materials composed of magnetic materials and MXene has attracted significant attention. However, the thickness and microwave absorption performance of the composite is still barely satisfactory. In this work, the C-N@NiFe₂O₄@MXene/Ni nanocomposites were successfully synthesized in situ by hydrothermal and calcination methods. Benefiting from the introduction of the carbon-nitrogen(C-N) network structure, the overall dielectric properties are improved effectively, consequently reducing the thickness of the composite while maintaining excellent absorption performance. As a result, the minimum reflection loss of C-N@NiFe₂O₄@MXene/Ni can reach -50.51 dB at 17.3 GHz at an ultralow thickness of 1.5 mm, with an effective absorption bandwidth of 4.95 GHz (13.02-18 GHz). This research provides a novel strategy for materials to maintain good absorption performance at an ultralow thickness level.

Two dimensional S-scheme Bi2WO6-TiO2-Ti3C2 nanocomposites for efficient degradation of organic pollutants under natural sunlight

Two-dimensional (2D) materials have fascinated the researchers to exploit their properties including large surface area, ability to act as a support and to form face-to-face interfacial contact with other 2D materials for fabricating efficient photocatalytic materials. In this work, Bi₂WO₆, TiO₂ and Ti₃C₂ nanosheets have been used synthesizing different series of binary Bi₂WO₆-TiO₂ and ternary Bi₂WO₆-TiO₂-Ti₃C₂ 2D nanocomposites by an electrostatic self-assembly synthesis route. The as-prepared pristine materials and binary and ternary nanocomposites were characterized by different structural, morphological and compositional characterization techniques to confirm their successful synthesis and 2D morphology. It was found that the optimized Bi₂WO₆-TiO₂ (20 wt%) and Bi₂WO₆-TiO₂ (20 wt%)-Ti₃C₂ (5 wt%) nanocomposites showed 97.0% and 98.5% degradation of methyl green in 80 min and 40 min, respectively, which was higher than their pristine counterparts. The enhanced activity was credited to the large surface area offered by 2D nanocomposites, pollutant adsorption and enhanced photogenerated charge separation and transfer facilitated by S-scheme mechanism and face-to-face interfacial contact of different components of these nanocomposites. This work delivers an example of highly efficient 2D nanocomposites and discusses the role of Ti₃C₂ as an electron acceptor in S-scheme photocatalytic system.

Electrostatic Adsorption Enables Layer Stacking Thickness-Dependent Hollow Ti3 C2 Tx MXene Bowls for Superior Electromagnetic Wave Absorption

Although transition metal carbides/carbonitrides (MXenes) exhibit immense potential for electromagnetic wave (EMW) absorption, their absorbing ability is hindered by facile stacking and high permittivity. Layer stacking and geometric structures are expected to significantly affect the conductivity and permittivity of MXenes. However, it is still a formidable task to simultaneously regulate layer stacking and microstructure of MXenes to realize high-performance EMW absorption. Herein, a simple and viable strategy using electrostatic adsorption is developed to integrate 2D Ti₃ C₂ T_x MXene nanosheets into 3D hollow bowl-like structures with tunable layer stacking thickness. Density functional theory calculations indicate an increase in the density of states of the d orbital from the Ti atom near the Fermi level and the generation of additional electrical dipoles in the MXene nanosheets constituting the bowl walls upon reducing the layer stacking thickness. The hollow MXene bowls exhibit a minimum reflection loss (RL_min ) of -53.8 dB at 1.8 mm. The specific absorbing performance, defined as RL_min (dB)/thickness (mm)/filler loading (wt%), exceeds 598 dB mm^-1 , far surpassing that of the most current MXene and bowl-like materials reported in the literature. This work can guide future exploration on designing high-performance MXenes with "lightweight" and "thinness" characteristics for superior EMW absorption.

High-Quality Ferromagnet Fe3GeTe2 for High-Efficiency Electromagnetic Wave Absorption and Shielding with Wideband Radar Cross Section Reduction

A high-quality Fe₃GeTe₂ single crystal with good electrical, magnetic, and electromagnetic wave absorption and shielding properties was prepared in a large quantity (10 g level) by solid-phase sintering and recrystallization method, which would promote its in-depth research and practical application. It has good room-temperature electrical properties with a mobility of 42 cm²/V·s, a sheet (bulk) carrier concentration of +1.64 × 10¹⁸ /cm² (+3.28 × 10²⁰ /cm³), and a conductivity of 2196.35 S/cm. Also, a Curie temperature of 238 K indicates the high magnetic transition temperature and a paramagnetic Curie temperature of 301 K shows the large ferromagnetic-paramagnetic transition zone induced by the residual short-range ferromagnetic domains. Particularly, Fe₃GeTe₂ is in a loosely packed state when used as a loss agent; the electromagnetic wave absorption with a reflection loss of -34.7 dB at 3.66 GHz under thin thickness was shown. Meanwhile, the absorption band can be effectively regulated by varying the thickness. Moreover, Fe₃GeTe₂ in a close-packed state exhibits terahertz shielding values of 75.1 and 103.2 dB at very thin thicknesses of 70 and 380 μm, and the average shielding value is higher than 47 dB, covering the entire bandwidth from 0.1 to 3.0 THz. Furthermore, by using Fe₃GeTe₂ as a patch, the wideband radar cross-section can be effectively reduced by up to 33 dBsm. Resultantly, Fe₃GeTe₂ will be a promising candidate in the electromagnetic protection field.

Gelatin-Reinforced Zwitterionic Organohydrogel with Tough, Self-Adhesive, Long-Term Moisturizing and Antifreezing Properties for Wearable Electronics

Strong mechanical performance, appropriate adhesion capacity, and excellent biocompatibility of conductive hydrogel-based sensors are of great significance for their application. However, conventional conductive hydrogels usually exhibit insufficient mechanical strength and adhesion. In addition, they will lose flexibility and conductivity under subzero temperature and a dry environment owing to inevitable freezing and evaporation of water. In this study, a tough, flexible, self-adhesive, long-term moisturizing, and antifreezing organohydrogel was prepared, which was composed of gelatin, zwitterionic poly [2-(methacryloyloxy) ethyl] dimethyl-(3-sulfopropyl) (PSBMA), MXene nanosheets, and glycerol. Natural gelatin was incorporated to enhance mechanical performance via the entanglement of a physical cross-linked network and a PSBMA network, which was also used as a stabilizer to disperse MXene into the organohydrogel. Zwitterionic PSBMA endowed the organohydrogel with good adhesion and self-healing properties. Long-term moisturizing properties and antifreeze tolerance could be achieved owing to the synergistic water retention capacity of PSBMA and glycerol. The resulting PSBMA-gelatin-MXene-glycerol (PGMG) organohydrogel exhibited high mechanical fracture strength (0.65 MPa) and stretchability (over 1000%), excellent toughness (3.87 MJ/m³), strong and repeated adhesion to diverse substrates (e.g., paper, glass, silicon rubber, iron, and pig skin), good fatigue resistance (under the cyclic stretching-releasing process), and rapid recovery capacity. Moreover, the PGMG organohydrogel showed good stability under -40 °C. The sensor based on PGMG organohydrogel could tightly attach to the human skin and real-time-monitor the motions of joints (e.g., bending of the finger, wrist, elbow, and knee) and the change in mood such as smiling and frowning. Therefore, PGMG organohydrogels have a huge potential for wearable sensors under room temperature or extreme environments.

Self-Powered Monitoring of Ammonia Using an MXene/TiO2/Cellulose Nanofiber Heterojunction-Based Sensor Driven by an Electrospun Triboelectric Nanogenerator

Real-time monitoring of harmful gases is of great significance to identify the environmental hazards to people's lives. However, this application scenario requiring low-power consumption, superior sensitivity, portability, and self-driven operation of gas sensors remains a challenge. Herein, an electrospun triboelectric nanogenerator (TENG) is synthesized using highly electronegative and conducting MXene nanofibers (NFs) paired with biodegradable cellulose acetate NFs (CA-NFs) as triboelectric layers, which supports a sufficient power density (∼1361 mW/m²@2 MΩ) and shows a self-powered ability to operate the chemiresistive gas sensor fabricated in this work. Further, by using cellulose nanofibers (C-NFs) as a substrate, a new kind of MXene/TiO₂/C-NFs heterojunction-based sensory component is developed for detection of NH₃. This sensor exhibits excellent reproducibility, high selectivity, and sensitivity toward NH₃ (1-100 ppm) along with a fast response/recovery time (76 s/62 s) at room temperature. Finally, a monitoring system comprising a TENG-powered sensor, an equivalent circuit, and an LED visualizer has been assembled and successfully demonstrated as a fully self-powered device for NH₃ leakage detection. Thus, this work pushes forward the intelligent gas sensing network self-driven by human motion energy, dispensing the external battery dependence for environment monitoring to reduce the possible health effects.

Nitrogen-Doped Ti3C2Tx MXene Induced by Plasma Treatment with Enhanced Microwave Absorption Properties

Ti₃C₂T_x has microwave absorption (MA) properties due to its dielectric loss, but the absence of magnetic loss capability of pure Ti₃C₂T_x causes unmatched impedance and unsatisfied MA performance. Modification of Ti₃C₂T_x with magnetic particles is an effective way to introduce the magnetic loss mechanism. However, these modified Ti₃C₂T_x particles have higher density and require complicated fabrication processes, restricting the industrial production and functional applications. Here, a low-temperature and simple method of radio-frequency N₂ plasma treatment was adopted to modify Ti₃C₂T_x with N. More interestingly, the N-doped Ti₃C₂T_x flakes demonstrated magnetic properties and thus exhibited drastically enhanced MA properties. The minimum reflection loss (RL_min) of -59.20 dB at 10.56 GHz was achieved in N-doped Ti₃C₂T_x products after only 3 min of plasma treatment, remarkably higher than RL_min of -11.07 dB at 7.92 GHz for the pristine Ti₃C₂T_x. The main mechanism is due to the combination of dielectric loss, magnetic loss, and the good impedance matching in the N-doped Ti₃C₂T_x. Further prolonging the nitriding time induces much desorption of -F and the formation of TiO₂, thus deteriorating the impedance matching and the MA properties.

Composition Optimization and Microstructure Design in MOFs-Derived Magnetic Carbon-Based Microwave Absorbers: A Review

Magnetic carbon-based composites are the most attractive candidates for electromagnetic (EM) absorption because they can terminate the propagation of surplus EM waves in space by interacting with both electric and magnetic branches. Metal-organic frameworks (MOFs) have demonstrated their great potential as sacrificing precursors of magnetic metals/carbon composites, because they provide a good platform to achieve high dispersion of magnetic nanoparticles in carbon matrix. Nevertheless, the chemical composition and microstructure of these composites are always highly dependent on their precursors and cannot promise an optimal EM state favorable for EM absorption, which more or less discount the superiority of MOFs-derived strategy. It is hence of great importance to develop some accompanied methods that can regulate EM properties of MOFs-derived magnetic carbon-based composites effectively. This review comprehensively introduces recent advancements on EM absorption enhancement in MOFs-derived magnetic carbon-based composites and some available strategies therein. In addition, some challenges and prospects are also proposed to indicate the pending issues on performance breakthrough and mechanism exploration in the related field.

Design and Synthesis Strategies: 2D Materials for Electromagnetic Shielding/Absorbing

Two-dimensional (2D) materials possess special physical and chemical properties. They have been proved to have potential application advantage in the microwave absorption (MA) and electromagnetic interference (EMI) shielding. Particularly, they exhibit positive shielding and absorbing response to EMI. Here, the research progress of preparation, electromagnetic performance and microwave shielding/absorbing mechanisms of 2D composite materials are introduced. Effective preparation routes including introducing heteroatoms, constructing unique structures and 2D composite materials are described. Furthermore, the application prospects and challenges for the development of novel EMI materials are expatiated.

Fabrication of folded MXene/MoS2 composite microspheres with optimal composition and their microwave absorbing properties

In this work, ultrasonic spray technology is utilized for build up MXene and MoS₂ nanosheets to three-dimensional MXene/MoS₂ fold microspheres by one-step method. By skillfully assembling two kinds of functional two-dimensional materials, the microspheres have abundant heterogeneous interfaces and huge specific surface area. The optimum feed ratio of MXene and MoS₂ is determined by comparing the absorbing properties, and the mass ratio is 5:1. With 30% filler, the material shows the best absorption performance. At 10.4 GHz, the minimal reflection loss (RL_min) reach -51.21 dB, and the thickness is merely 2.5 mm. At the thickness in 1.6 mm, the efficacious absorption bandwidth (RL < -10 dB) reaches 4.4 GHz. The outstanding microwave absorbing properties with MXene/MoS₂ folded microspheres is resulted in the multiple interfaces in the heterostructure and above the average conductivity of MXene. The results show that MXene/MoS₂ folded microsphere is a prospective electromagnetic absorbing material. The construction of MXene/MoS₂ folded microsphere provides an effective method to devise new high-performance microwave absorbing materials.

A Comparative Study of Cytotoxicity of PPG and PEG Surface-Modified 2-D Ti3C2 MXene Flakes on Human Cancer Cells and Their Photothermal Response

The MXenes are a novel family of 2-D materials with promising biomedical activity, however, their anticancer potential is still largely unexplored. In this study, a comparative cytotoxicity investigation of Ti3C2 MXenes with polypropylene glycol (PPG), and polyethylene glycol (PEG) surface-modified 2-D Ti3C2 MXene flakes has been conducted towards normal and cancerous human cell lines. The wet chemical etching method was used to synthesize MXene followed by a simple chemical mixing method for surface modification of Ti3C2 MXene with PPG and PEG molecules. SEM and XRD analyses were performed to examine surface morphology and elemental composition, respectively. FTIR and UV-vis spectroscopy were used to confirm surface modification and light absorption, respectively. The cell lines used to study the cytotoxicity of MXene and surface-modified MXenes in this study were normal (HaCaT and MCF-10A) and cancerous (MCF-7 and A375) cells. These cell lines were also used as controls (without exposure to study material and irradiation) to measure their baseline cell viability under the same lab environment. The surface-modified MXenes exhibited a sharp reduction in cell viability towards both normal (HaCaT and MCF-10A) and cancerous (MCF-7 and A375) cells but cytotoxicity was more pronounced towards cancerous cell lines. This may be due to the difference in cell metabolism and the occurrence of high pre-existing levels of reactive oxygen species (ROS) within cancerous cells. The highest toxicity towards both normal and cancerous cell lines was observed with PEGylated MXenes followed by PPGylated and bare MXenes. The normal cell's viability was barely above 70% threshold with 250 mg/L PEGylated MXene concentration whereas PPGylated and bare MXene were less toxic towards normal cells, even at 500 mg/L concentration. Moreover, the toxicity was found to be directly related to the type of cell lines. In general, the HaCaT cell line exhibited the lowest toxicity while toxicity was highest in the case of the A375 cell line. The photothermal studies revealed high photo response for PEGylated MXene followed by PPGylated and bare MXenes. However, the PPGylated MXene's lower cytotoxicity towards normal cells while comparable toxicity towards malignant cells as compared to PEGylated MXenes makes the former a relatively safe and effective anticancer agent.

Developing MXenes from Wireless Communication to Electromagnetic Attenuation

There is an urgent global need for wireless communication utilizing materials that can provide simultaneous flexibility and high conductivity. Avoiding the harmful effects of electromagnetic (EM) radiation from wireless communication is a persistent research hot spot. Two-dimensional (2D) materials are the preferred choice as wireless communication and EM attenuation materials as they are lightweight with high aspect ratios and possess distinguished electronic properties. MXenes, as a novel family of 2D materials, have shown excellent properties in various fields, owing to their excellent electrical conductivity, mechanical stability, high flexibility, and ease of processability. To date, research on the utility of MXenes for wireless communication has been actively pursued. Moreover, MXenes have become the leading materials for EM attenuation. Herein, we systematically review the recent advances in MXene-based materials with different structural designs for wireless communication, electromagnetic interference (EMI) shielding, and EM wave absorption. The relationship governing the structural design and the effectiveness for wireless communication, EMI shielding, and EM wave absorption is clearly revealed. Furthermore, our review mainly focuses on future challenges and guidelines for designing MXene-based materials for industrial application and foundational research.

Tuning the Magnetic Properties of Two-Dimensional MXenes by Chemical Etching

Two-dimensional materials based on transition metal carbides have been intensively studied due to their unique properties including metallic conductivity, hydrophilicity and structural diversity and have shown a great potential in several applications, for example, energy storage, sensing and optoelectronics. While MXenes based on magnetic transition elements show interesting magnetic properties, not much is known about the magnetic properties of titanium-based MXenes. Here, we measured the magnetic properties of Ti3C2Tx MXenes synthesized by different chemical etching conditions such as etching temperature and time. Our magnetic measurements were performed in a superconducting quantum interference device (SQUID) vibrating sample. These data suggest that there is a paramagnetic-antiferromagnetic (PM-AFM) phase transition and the transition temperature depends on the synthesis procedure of MXenes. Our observation indicates that the magnetic properties of these MXenes can be tuned by the extent of chemical etching, which can be beneficial for the design of MXenes-based spintronic devices.

Assessment of Tribological Properties of Ti3C2 as a Water-Based Lubricant Additive

Water-based lubrication has attracted remarkable interest due to its environmental and economic advantages. However, practical applications of water-based lubrication are often limited, mainly because of low viscosity and corrosivity. The use of additives has been proposed to overcome these limitations. In this work, the tribological characteristics of titanium carbide (Ti3C2) MXenes, as additives for water-based lubrication, were systematically investigated for contact sliding between stainless steel under various normal forces and Ti3C2 concentrations. Both friction and wear were found to decrease with increasing Ti3C2 concentration up to 5 wt%, and then increased when the concentration was larger than 5 wt%. The results suggest that Ti3C2 flakes hindered direct contact, particularly at the edges of the contact interfaces. It was further shown that the agglomeration of Ti3C2 flakes may have reduced the hindering when an excessive amount of Ti3C2 (e.g., 7 wt%) was applied. The decreases in the friction coefficient and wear rate with 5 wt% of Ti3C2 concentration w approximately 20% and 48%, respectively. The outcomes of this work may be helpful in gaining a better understanding of the tribological properties of Ti3C2 as a feasible water-based lubrication additive.

Exfoliation and Defect Control of Two-Dimensional Few-Layer MXene Ti3C2Tx for Electromagnetic Interference Shielding Coatings

Defect-controlled exfoliation of few-layer transition-metal carbide (f-Ti₃C₂T_x) MXene was demonstrated by optimizing chemical etching conditions, and electromagnetic interference (EMI) shielding coatings were explored. The structural features such as layer morphology, lateral size, layer thickness, defect density, and mechanical stability of the exfoliated f-Ti₃C₂T_x were strongly dependent on exfoliation conditions. By selecting appropriate exfoliation conditions, moderate etching time leads to the formation of quality f-Ti₃C₂T_x with lesser defects, whereas longer etching time can break the layer structure and increase defect density, structural misalignment, and oxidative products of f-Ti₃C₂T_x. The resultant fabricated free-standing flexible f-Ti₃C₂T_x films exhibited electrical conductivity and electromagnetic interference (EMI) shielding effectiveness (SE) in the X-band of about 3669 ± 33 S/m and 31.97 dB, respectively, at a thickness of 6 μm. The large discrepancy in EMI SE performance between quality (31.97 dB) and defected (3.164 dB) f-Ti₃C₂T_x sheets is attributed to interconnections between f-Ti₃C₂T_x nanolaminates interrupted by defects and oxidative products, influencing EMI attenuation ability. Furthermore, the demonstrated solution-processable high-quality f-Ti₃C₂T_x inks are compatible and, when applied for EM barrier coating on various substrates, including paper, cellulose fabric, and PTFE membranes, exhibited significant EMI shielding performance. Moreover, controlling defects in f-Ti₃C₂T_x and assembly of heterogeneous disordered carbon-loaded TiO₂-Ti₃C₂T_x ternary hybrid nanostructures from f-Ti₃C₂T_x by tuning etching conditions could play an enormous role in energy and environmental applications.

Wearable Capacitive Pressure Sensor Based on MXene Composite Nanofibrous Scaffolds for Reliable Human Physiological Signal Acquisition

In recent years, highly sensitive pressure sensors that are flexible, biocompatible, and stretchable have attracted significant research attention in the fields of wearable electronics and smart skin. However, there has been a considerable challenge to simultaneously achieve highly sensitive, low-cost sensors coupled with optimum mechanical stability and an ultralow detection limit for subtle physiological signal monitoring devices. Targeting aforementioned issues, herein, we report the facile fabrication of a highly sensitive and reliable capacitive pressure sensor for ultralow-pressure measurement by sandwiching MXene (Ti₃C₂T_x)/poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE) composite nanofibrous scaffolds as a dielectric layer between biocompatible poly-(3,4-ethylenedioxythiophene) polystyrene sulfonate /polydimethylsiloxane electrodes. The fabricated sensor exhibits a high sensitivity of 0.51 kPa^-1 and a minimum detection limit of 1.5 Pa. In addition, it also enables linear sensing over a broad pressure range (0-400 kPa) and high reliability over 10,000 cycles even at extremely high pressure (>167 kPa). The sensitivity of the nanofiber-based sensor is enhanced by MXene loading, thereby increasing the dielectric constant up to 40 and reducing the compression modulus to 58% compared with pristine PVDF-TrFE nanofiber scaffolds. The proposed sensor can be used to determine the health condition of patients by monitoring physiological signals (pulse rate, respiration, muscle movements, and eye twitching) and also represents a good candidate for a next generation human-machine interfacing device.

Comparative evaluation of MAX, MXene, NanoMAX, and NanoMAX-derived-MXene for microwave absorption and Li ion battery anode applications

MAX and MXene phases possess unique physical properties, encompassing the realms of both ceramics and metals. Their nanolaminated layered configuration, high anisotropic electrical conductivity, and ability to scatter electromagnetic radiation are beneficial in multiple applications. Herein, detailed applications of MAX and MXene are studied in the fields of microwave absorption and Li ion batteries (LIB). In particular, coatings based on MAX, MXene, ball-milled NanoMAX, and NanoMAX-derived-MXene (MXene-N) and their composites are examined in terms of their comparative efficacy for the aforesaid applications. NanoMAX and MXene-N based composites with graphite exhibit superior performance with specific reflection loss values (representing absorbance when measured with metal-backing) of -21.4 and -19 dB cm³ g^-1, respectively, as compared to their bulk counterparts, that too with a low density (0.63 g cm^-3) and very small thickness (0.03 mm). These performance improvements in absorbance in only 30 μm coatings can be attributed to reflective losses compounded with multiple internal reflections within the nanocomposite intensified by dielectric losses, arising from high interface density. The pristine samples were also studied for their performance as Li ion battery anodes. Herein, MXene-N exhibits the best performance with a specific capacity of 330 mA h g^-1 at 100 mA g^-1 and excellent cycling stability tested up to 1000 cycles.

Engineering 2D Mesoporous Silica@MXene-Integrated 3D-Printing Scaffolds for Combinatory Osteosarcoma Therapy and NO-Augmented Bone Regeneration

The rising concerns of the recurrence and bone deficiency in surgical treatment of malignant bone tumors have raised an urgent need of the advance of multifunctional therapeutic platforms for efficient tumor therapy and bone regeneration. Herein, the construction of a multifunctional biomaterial system is reported by the integration of 2D Nb₂ C MXene wrapped with S-nitrosothiol (RSNO)-grafted mesoporous silica with 3D-printing bioactive glass (BG) scaffolds (MBS). The near infrared (NIR)-triggered photonic hyperthermia of MXene in the NIR-II biowindow and precisely controlled nitric oxide (NO) release are coordinated for multitarget ablation of bone tumors to enhance localized osteosarcoma treatment. The in situ formed phosphorus and calcium components degraded from BG scaffold promote bone-regeneration bioactivity, augmented by sufficient blood supply triggered by on-demand NO release. The tunable NO generation plays a crucial role in sequential adjuvant tumor ablation, combinatory promotion of coupled vascularization, and bone regeneration. This study demonstrates a combinatory osteosarcoma ablation and a full osseous regeneration as enabled by the implantation of MBS. The design of multifunctional scaffolds with the specific features of controllable NO release, highly efficient photothermal conversion, and stimulatory bone regeneration provides an intriguing biomaterial platform for the diversified treatment of bone tumors.

Sandwich-Like Fe&TiO2@C Nanocomposites Derived from MXene/Fe-MOFs Hybrids for Electromagnetic Absorption

Electromagnetic pollution has been causing a series of problems in people's life, and electromagnetic absorbers with lightweight and broad absorbing bandwidth properties are widely desired. In this work, novel sandwich-like 2D laminated Fe&TiO2 nanoparticles@C nanocomposites were rationally designed and successfully developed from the MXene-MOFs hybrids. The formation of Fe and rutile-TiO2 nanoparticles sandwiched by the two-dimensional carbon nanosheets provided strong electromagnetic energy attenuation and good impedance matching for electromagnetic wave (EMW) absorption. As expected, the nanocomposites achieved a broad effective absorption bandwidth of 6.5 GHz at a thickness of only 1.6 mm and the minimum reflection loss (RL) value of - 51.8 dB at 6.6 GHz with a thickness of 3 mm. This work not only provides a good design and fabricating concept for the laminated metal and functional nanoparticles@C nanocomposites with good EMW absorption, but also offers an important guideline to fabricate various two-dimensional nanocomposites derived from the MXene precursors.

Carbon Nanofibers Propped Hierarchical Porous SiOC Ceramics Toward Efficient Microwave Absorption

The hierarchical porous SiOC ceramics (HPSCs) have been prepared by the pyrolysis of precursors (the mixture of dimethicone and KH-570) and polyacrylonitrile nanofibers (porous template). The HPSCs possess hierarchical porous structure with a BET surface area of 51.4 m2/g and have a good anti-oxidation property (only 5.1 wt.% weight loss). Owing to the porous structure, the HPSCs deliver an optimal reflection loss value of - 47.9 dB at 12.24 GHz and an effective absorption bandwidth of 4.56 GHz with a thickness of 2.3 mm. The amorphous SiOC, SiOx, and free carbon components within SiOC make contributions to enhancing dipolar polarization. Besides, the abundant interfaces between SiOC and carbon nanofibers (CNFs) are favorable for improving interfacial polarization. The conductive loss arisen from cross-linked CNFs can also boost the microwave absorption performance.

Dynamical Control over Terahertz Electromagnetic Interference Shielding with 2D Ti3C2Ty MXene by Ultrafast Optical Pulses

High electrical conductivity and strong absorption of electromagnetic radiation in the terahertz (THz) frequency range by metallic 2D MXene Ti₃C₂T_y make it a promising material for electromagnetic interference shielding, THz detectors, and transparent conducting electrodes. Here, we demonstrate that ultrafast optical pulses with wavelengths straddling the visible range (400 and 800 nm) induce transient broad-band THz transparency in the MXene that persists for nanoseconds. We demonstrate that optically induced transient THz transparency is independent of temperature from 95 to 290 K. This discovery opens new possibilities for development of switchable electromagnetic interference shielding materials and devices that can be rendered partially transparent on demand for transmitting THz signals, or for designing new THz devices such as sensitive optically gated detectors.