Nanospace-confined preparation of uniform nitrogen-doped graphene quantum dots for highly selective fluorescence dual-function determination of Fe3+ and ascorbic acid

Tailor-designed carbon-based novel fluorescent architecture for nanomolar detection of radioactive elements U(VI) and Th(IV) in pH ± 5.0

Highly stable nitrogen-doped Graphene Quantum Dots (N-GQD) functionalized with Pamoic Acid (PA@N-GQD) are utilized for nanomolar detection of radioactive elements, Uranium (VI) and Thorium (IV), in pH ± 5.0. The absorption, fluorescence, crystalline nature, elemental composition, functional groups, and morphological state of as-prepared PA@N-GQD are evaluated by UV-visible absorption, photoluminescence, XRD, XPS, FTIR, HRTEM, FESEM, and AFM characterizations. The aqueous solution of PA@N-GQD is characterized by its spherical morphology, averaging 6.5 nm in size. PA@N-GQD exhibits a gradual decrease in fluorescence intensity at 438 nm (λex 344 nm) upon the addition of Uranium (VI) and Thorium (IV) ions. The selectivity, sensitivity, competitivity, pH, time effect, and reversibility studies of PA@N-GQDs have been carried out using the photoluminescence technique. The attained fluorescence Limit of Detection (LoD) of PA@N-GQD for Uranium (VI) and Thorium (IV) ions are 2.009 × 10-9 and 1.351 × 10-9 M, respectively. From the fluorescence titration studies of U(VI) and Th(IV), the binding constant, Stern-Volmer constant, Modified Stern-Volmer constant, association constant, and dissociation constants have been calculated separately. These aforementioned results indicate that the PA@N-GQD has a higher binding affinity towards Th(IV) than U(VI) in aqueous medium. This current research represents the development of advanced materials for environmental and analytical applications, specifically focusing on the precise detection and quantification of radioactive elements.

Fe3+-induced luminescence quenching in carbon dots - mechanism unveiled

Carbon dot (CD)-based fluorimetric sensors have attracted immense attention for the detection of metal ions. Among the available works in this direction, more than 70% of the studies reported the detection of Fe3+ through luminescence quenching. Ferric ions are significant species from environmental and biological point of view. Excited-state electron transfer from carbon dots to ferric ions is suggested as the reason for the luminescence quenching. However, to date, no solid proof was provided to demonstrate this electron transfer process. Herein, N-doped blue luminescent carbon dots prepared via hydrothermal carbonization are used to demonstrate the exact mechanism operating in the above-mentioned detection strategy. The carbon dots possessed an average size of 4.9 nm, and exhibited good aqueous solubility as well as an excitation wavelength-dependent emission. Fe3+-mediated luminescence quenching was quantitatively achieved at the micromolar level, with a detection limit of 1.426 μM. The CD-mediated reduction of ferric ions is confirmed by spectral analysis. Fe3+-induced luminescence quenching was partially restored in the presence of ascorbic acid, enabling the sub-micromolar level monitoring of this analyte, with the lowest detection amount of 276 nM. Turnbull's blue method is adopted for confirming the reducing role of ascorbic acid, which eventually increased the luminescence of the system, evoking a turn-on response.

Determination of trace amount of iron cations using electrochemical methods at N, S doped GQD modified electrode

In this work, nitrogen and sulfur co-doped graphene quantum dot-modified glassy carbon electrodes (N, S-GQD/GCE) were used for the recognition of iron cations in aqueous solutions. The dissolved cations are detected based on the faradaic reduction or oxidation current of Fe(III) and Fe(II) obtained at the N, S-GQD/GCE surface. Cyclic voltammetry (CV), square wave voltammetry (SWV), and hydrodynamic amperometry are used as suitable electrochemical techniques for studying electrochemical behavior and determination of Fe cations. Based on the obtained results, it is concluded that the presence of free electrons in the structure of N, S-GQD could facilitate electron transfer reaction between Fe(III) and electrode surface which with increased surface area results in increased sensitivity and lower limit of detection. By performing suitable experiments, the best condition for preparing the modified electrode and determining Fe(III) was selected. Under optimized conditions, the amperometric response is linear from 1 to 100 nM of Fe(III) with a detection limit of 0.23 nM. The validity of the method and applicability of the sensor is successfully tested by the determination of Fe(III) in drug and water real samples. This sensor opened a new platform based on doped nanoparticles for highly sensitive and selective detection of analytes.

Gamma-Ray-Induced Structural Transformation of GQDs towards the Improvement of Their Optical Properties, Monitoring of Selected Toxic Compounds, and Photo-Induced Effects on Bacterial Strains

Structural modification of different carbon-based nanomaterials is often necessary to improve their morphology and optical properties, particularly the incorporation of N-atoms in graphene quantum dots (GQDs). Here, a clean, simple, one-step, and eco-friendly method for N-doping of GQDs using gamma irradiation is reported. GQDs were irradiated in the presence of the different ethylenediamine (EDA) amounts (1 g, 5 g, and 10 g) and the highest % of N was detected in the presence of 10 g. N-doped GQDs emitted strong, blue photoluminescence (PL). Photoluminescence quantum yield was increased from 1.45, as obtained for non-irradiated dots, to 7.24% for those irradiated in the presence of 1 g of EDA. Modified GQDs were investigated as a PL probe for the detection of insecticide Carbofuran (2,2-Dimethyl-2,3-dihydro-1-benzofuran-7-yl methylcarbamate) and herbicide Amitrole (3-amino-1,2,4-triazole). The limit of detection was 5.4 μmol L^-1 for Carbofuran. For the first time, Amitrole was detected by GQDs in a turn-off/turn-on mechanism using Pd(II) ions as a quenching agent. First, Pd(II) ions were quenched (turn-off) PL of GQDs, while after Amitrole addition, PL was recovered linearly with Amitrole concentration (turn-on). LOD was 2.03 μmol L^-1. These results suggest that modified GQDs can be used as an efficient new material for Carbofuran and Amitrole detection. Furthermore, the phototoxicity of dots was investigated on both Gram-positive and Gram-negative bacterial strains. When bacterial cells were exposed to different GQD concentrations and illuminated with light of 470 nm wavelength, the toxic effects were not observed.

Ultrasensitive Detection of Fe3+ Ions Using Functionalized Graphene Quantum Dots Fabricated by a One-Step Pulsed Laser Ablation Process

With respect to the detection of Fe3+ ions, graphene quantum dots (GQDs) have limitations for commercialization owing to their high limit of detection (LOD). Here, we report a one-step pulsed laser ablation (PLA) process to fabricate amino-functionalized GQDs (FGQDs) for the efficient detection of Fe3+ using polypyrrole (PPy) both as a precursor (amine N) and as a surfactant and also using graphite as a carbon precursor. Using this method, the amine N groups were easily incorporated into the carbon network of the GQDs. Additionally, compared to pristine GQDs, FGQDs showed smaller particle sizes and narrower size distributions owing to the surface passivation effects of the PPy surfactant. Due to the synergistic effect of surface passivation and incorporation of amine N groups, FGQDs exhibited a sensitive response to Fe3+ ions in the concentration range of 500 nM to 50 μM, which is lower than the quality standards for Fe3+ ions (∼5.36 μM) as suggested by the World Health Organization (WHO). Furthermore, the processing time for synthesizing FGQDs by the PLA process was less than 30 min, thus allowing successful practical applications of GQDs in the sensing field.

Reduce and concentrate graphene quantum dot size via scissors: vacancy, pentagon-heptagon and interstitial defects in graphite by gamma rays

Graphene quantum dots (GQDs) with ultrafine particle size and centralized distribution have advantages of small size, narrow size distribution and large specific surface area, which make it be better applied in bioimaging, drug delivery and so on. In our research, we used graphite irradiated byγ-rays to successfully prepare GQDs with ultrafine particle size, narrow size distribution and high quantum yields through solvothermal method. Vacancy defects, pentagon-heptagon defects and interstitial defects were introduced to graphite structure after irradiation, which caused the abundance and concentrated distribution of defects. The defects generated by irradiation could damage the lattice structure of graphite to make it easy for introduction of C-O-C inside graphite sheets. The oxygen-containing functional groups in graphene oxide (GO) increased and centrally distributed after irradiation in graphite, especially for C-O-C group, which were beneficial for cutting of GO and grafting of functional groups in GQDs. Therefore, average size of GQDs was successfully reduced to 1.43 nm and concentrated to 0.6-2.4 nm. After irradiation in graphite, the content of carbonyl and C-N in GQDs had a promotion, which suppressed non-radiative recombination and upgraded the quantum yields to 13.9%.

Synthesis of graphene quantum dots and their applications in drug delivery

This review focuses on the recent advances in the synthesis of graphene quantum dots (GQDs) and their applications in drug delivery. To give a brief understanding about the preparation of GQDs, recent advances in methods of GQDs synthesis are first presented. Afterwards, various drug delivery-release modes of GQDs-based drug delivery systems such as EPR-pH delivery-release mode, ligand-pH delivery-release mode, EPR-Photothermal delivery-Release mode, and Core/Shell-photothermal/magnetic thermal delivery-release mode are reviewed. Finally, the current challenges and the prospective application of GQDs in drug delivery are discussed.

Benefit of porous silica nanoreactor in preparation of fluorescence carbon dots from citric acid

A facile and robust synthesis of carbon dots (CDs) emitting blue-light in water without activation and stabilization has been developed by pyrolysis of citric acid (CA) adsorbed in silica gel (SiO2) pores. Effect of the host pore size on luminescent properties of SiO2@CDs nanocomposite as well as water suspension of CDs has been studied. The synthesis conditions such as concentration of the precursor, duration of synthesis also have been investigated. It has been demonstrated that upon the thermal treatment of silica gels saturated with CA (60% of maximum loading) at 170 °C for 5–600 min, luminescent CDs are shaped inside the nanoreactor pores. These SiO2@CDs emit photoluminescence centered at 450 nm. Silica-immobilized CDs can be separated from the source molecules and side-products by centrifugation, which allows avoiding the dialysis of the resulted mixture and so improve the scaling of the synthesis. The CDs can be easily released from SiO2@CDs by washing it with water. Water-eluted CDs demonstrate photoluminescence at 447 nm. The smaller pore size of the host and longer time of thermal treatment promote the formation of the CDs with better photoluminescent peak symmetry and higher quantum yield up to 10.1%.

A carbon dot-based fluorescent nanoprobe for the associated detection of iron ions and the determination of the fluctuation of ascorbic acid induced by hypoxia in cells and in vivo

Maintaining the redox balance of biological systems is a key point to maintain a healthy physiological environment. Excessive iron ions (Fe³⁺) can cause apoptosis, tissue damage and death. Fortunately, ascorbic acid (AA) as a reducing agent has been evaluated for the reduction of Fe³⁺. Moreover, AA plays an important role in relieving hypoxia-induced oxidative stress. Therefore, the real-time imaging of the Fe³⁺ and AA fluctuations is important for understanding their biofunctions in cells and in vivo. In this work, we developed a fluorescent nanoprobe carbon dot-desferrioxamine B (CD-DB) by the conjugate connection of CDs and desferrioxamine B (a complexing agent for Fe³⁺) for the associated detection of Fe³⁺ and AA. CD-DB exhibited excellent sensitivity and selectivity for the detection of Fe³⁺ and AA. The nanoprobe CDs-DB@Fe obtained by the reaction of CD-DB and Fe³⁺ was suitable for tracing the dynamic changes of AA in cells and in vivo. Therefore, CDs-DB@Fe was used for monitoring the fluctuation of AA in hypoxic cell models, hypoxic zebrafish models and liver ischemia mice models. These results exhibited the decrease in AA under hypoxic conditions because AA was consumed to neutralize free radicals and relieve hypoxia-induced oxidative stress damage. The ideal biocompatibility and low toxicity make our nanoprobe a potential candidate for the research of the physiological effects of AA in vivo.

Mint leaf derived carbon dots for dual analyte detection of Fe(iii) and ascorbic acid

Highly luminescent carbon dots (CDs) are obtained from mint leaves adopting a simple and cost effective route devoid of additional chemical reagents and functionalization.