Multicomponent polysaccharide-protein bioconjugation in the development of antibacterial glycoconjugate vaccine candidates

Diversification of a Novel α-Galactosyl Ceramide Hotspot Boosts the Adjuvant Properties in Parenteral and Mucosal Vaccines

The development of potent adjuvants is an important step for improving the performance of subunit vaccines. CD1d agonists, such as the prototypical α-galactosyl ceramide (α-GalCer), are of special interest due to their ability to activate iNKT cells and trigger rapid dendritic cell maturation and B-cell activation. Herein, we introduce a novel derivatization hotspot at the α-GalCer skeleton, namely the N-substituent at the amide bond. The multicomponent diversification of this previously unexplored glycolipid chemotype space permitted the introduction of a variety of extra functionalities that can either potentiate the adjuvant properties or serve as handles for further conjugation to antigens toward the development of self-adjuvanting vaccines. This strategy led to the discovery of compounds eliciting enhanced antigen-specific T cell stimulation and a higher antibody response when delivered by either the parenteral or the mucosal route, as compared to a known potent CD1d agonist. Notably, various functionalized α-GalCer analogues showed a more potent adjuvant effect after intranasal immunization than a PEGylated α-GalCer analogue previously optimized for this purpose. Ultimately, this work could open multiple avenues of opportunity for the use of mucosal vaccines against microbial infections.

The extracellular polysaccharide inhibit porcine epidemic diarrhea virus with extract and gene editing Lacticaseibacillus

Lacticaseibacillus is one of the predominant microorganisms in gut from human and animal, and the lacticaseibacillus have effective applications against the viral diarrhea of piglets in the farm. However, the function and the concrete cell single pathways of the active ingredient from lacticaseibacillus was not clear within anti-infection in the postbiotics research. Here, we compared the biological function of extracellular polysaccharides (EPS) purified from lacticaseibacillus casei (L. casei) and gene editing lacticaseibacillus casei with the CRISPER-Cas9 technology, which were with the ability of antioxidation and anti-inflammation, and the EPS could also inhibit the ROS production within the Porcine Small Intestinal Epithelial Cells-J2 (IPEC-J2). Interestingly, we found that both of EPS and genome editing lacticaseibacillus casei could specifically target the IFN-λ expression in the IPEC-J2, which was beneficial against the PEDV infection in the virus replication and production with the qRT-PCR and indirect immunofluorescence methods. Finally, the STAT3 cell single pathway was stimulated to transcribe IFN-λ with the EPS to elucidate the detailed mechanism of activating type III IFN signals receptor of IL-10R2, which play the function between anti-inflammation and anti-virus in the PEDV infection. Taken together, our research linked a postbiotics of EPS with the antiviral infection of PEDV, which suggest that the lacticaseibacillus itself still have displayed the potential immunomodulatory activities, and highlight the immunomodulatory potential of EPS-producing microbes.

Sugars in Multicomponent Reactions: A Toolbox for Diversity-Oriented Synthesis

Multicomponent reactions (MCRs) cover strategically employed chemical transformations that incorporate three or more reactants in one pot leading to a functionalized final product. Thus, it is an ideal tool to achieve high levels of complexity, diversity, yields of desired products, atom economy, and reduced reaction times. Sugars belong to the class of naturally occurring compounds with fascinating applications in the field of drug discovery due to the presence of various hydroxy groups and well-defined stereochemistry. However, their potential in MCRs has been realized only recently. This account describes recent advances in the synthesis of sugar-derived heterocycles synthesized by MCRs. We hope to encourage the synthetic and medicinal chemistry community to apply this powerful MCR chemistry to generate novel glycoconjugate challenges.

1 Introduction

2 Synthesis of Various Functionalized Sugar Compounds

2.1 Passerini and Ugi Multicomponent Reactions

2.2 Petasis Reaction

2.3 Hantzsch Reaction

2.4 Domino Ferrier–Povarov Reaction

2.5 Marckwald Reaction

2.6 Groebke–Blackburn–Bienaymé (GBB) Reaction

2.7 Prins–Ritter Reaction

2.8 Debus–Radziszewski Imidazole Synthesis Reaction

2.9 Mannich Reaction

2.10 A3-Coupling Reaction

2.11 [3+2]-Cycloaddition Reactions

2.12 Miscellaneous Reactions

3 Conclusion

Ugi Four-Component Reactions Using Alternative Reactants

The Ugi four-component reaction (Ugi-4CR) undoubtedly is the most prominent multicomponent reaction (MCRs) that has sparked organic chemists' interest in the field. It has been widely used in the synthesis of diverse heterocycle molecules such as potential drugs, natural product analogs, pseudo peptides, macrocycles, and functional materials. The Ugi-4CRs involve the use of an amine, an aldehyde or ketone, an isocyanide, and a carboxylic acid to produce an α-acetamido carboxamide derivative, which has significantly advanced the field of isocyanide-based MCRs. The so-called intermediate nitrilium ion could be trapped by a nucleophile such as azide, N-hydroxyphthalimide, thiol, saccharin, phenol, water, and hydrogen sulfide instead of the original carboxylic acid to allow for a wide variety of Ugi-type reactions to occur.β In addition to isocyanide, there are alternative reagents for the other three components: amine, isocyanide, and aldehyde or ketone. All these alternative components render the Ugi reaction an aptly diversity-oriented synthesis of a myriad of biologically active molecules and complex scaffolds. Consequently, this review will delve deeper into alternative components used in the Ugi MCRs, particularly over the past ten years.

Optimization of the Process for Preparing Bivalent Polysaccharide Conjugates to Develop Multivalent Conjugate Vaccines against Streptococcus pneumoniae or Neisseria meningitidis and Comparison with the Corresponding Licensed Vaccines in Animal Models

OBJECTIVE

This study aimed to describe, optimize and evaluate a method for preparing multivalent conjugate vaccines by simultaneous conjugation of two different bacterial capsular polysaccharides (CPs) with tetanus toxoid (TT) as bivalent conjugates.

METHODS

Different molecular weights (MWs) of polysaccharides, activating agents and capsular polysaccharide/protein (CP/Pro) ratio that may influence conjugation and immunogenicity were investigated and optimized to prepare the bivalent conjugate bulk. Using the described method and optimized parameters, a 20-valent pneumococcal conjugate vaccine and a bivalent meningococcal vaccine were developed and their effectiveness was compared to that of corresponding licensed vaccines in rabbit or mouse models.

RESULTS

The immunogenicity test revealed that polysaccharides with lower MWs were better for Pn1-TT-Pn3 and MenA-TT-MenC, while higher MWs were superior for Pn4-TT-Pn14, Pn6A-TT-Pn6B, Pn7F-TT-Pn23F and Pn8-TT-Pn11A. For activating polysaccharides, 1-cyano-4-dimethylaminopyridinium tetrafluoroborate (CDAP) was superior to cyanogen bromide (CNBr), but for Pn1, Pn3 and MenC, N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDAC) was the most suitable option. For Pn6A-TT-Pn6B and Pn8-TT-Pn11A, rabbits immunized with bivalent conjugates with lower CP/Pro ratios showed significantly stronger CP-specific antibody responses, while for Pn4-TT-Pn14, higher CP/Pro ratio was better. Instead of interfering with the respective immunological activity, our bivalent conjugates usually induced higher IgG titers than their monovalent counterparts.

CONCLUSION

The result indicated that the described conjugation technique was feasible and efficacious to prepare glycoconjugate vaccines, laying a solid foundation for developing extended-valent multivalent or combined conjugate vaccines without potentially decreased immune function.

Green synthesis, crystal structure, and antifungal activities of (E)-4-arylidene-5-oxotetrahydrofuran

A series of γ-lactone derivatives (E)-4-arylidene-5-oxotetrahydrofuran derivatives were synthesized via a tandem Passerini 3CC/SN cyclization microwave-assisted one-pot method efficiently starting from Baylis Hillman acids, aryl glyoxals and isocyanides, and using ionic liquid as reaction medium. The products were characterized by hydrogen nuclear magnetic resonance spectroscopy (1H-NMR), carbon nuclear magnetic resonance spectroscopy (13C-NMR). Single crystal X-ray analysis of the compound RPDFB clearly confirmed its assigned chemical structures. Meanwhile, the effects of four compounds (RPDFB, RPDFC, RPDFI, RPDFJ) on the growth inhibition activity of Gibberella zeae were detected, and found that the compound RPDFB has significant growth inhibition activity to Gibberella zeae.

Synthesis of the trisaccharide repeating unit of Stenotrophomonas maltophilia O6 antigen through step-wise and one-pot approaches

Synthetic conjugate vaccines are an important area of research for the prevention and occurrence of diseases caused by Gram-negative bacteria. For the development of such vaccines, access to the pure and homogeneous oligosaccharide fragments of the bacterial cell surface polysaccharides are necessary. Stenotrophomonas maltophilia is a typical opportunistic Gram-negative bacteria that causes severe pulmonary and other infections; often in hospitalized patients. With the emergence of multidrug resistant strains and increased virulence, new therapeutic strategies are needed to combat the threat. Herein, we report the syntheses of the trisaccharide repeating unit of S. maltophilia O6 antigen through stepwise and one-pot assemblies of the trisaccharide. The target trisaccharide was appended with a 2-aminoethyl linker that could provide the opportunity for conjugation to carrier proteins for the synthesis of vaccine candidates.

Chemical Conjugation in Drug Delivery Systems

Cancer is one of the diseases with the highest mortality rate. Treatments to mitigate cancer are usually so intense and invasive that they weaken the patient to cure as dangerous as the own disease. From some time ago until today, to reduce resistance generated by the constant administration of the drug and improve its pharmacokinetics, scientists have been developing drug delivery system (DDS) technology. DDS platforms aim to maximize the drugs’ effectiveness by directing them to reach the affected area by the disease and, therefore, reduce the potential side effects. Erythrocytes, antibodies, and nanoparticles have been used as carriers. Eleven antibody–drug conjugates (ADCs) involving covalent linkage has been commercialized as a promising cancer treatment in the last years. This review describes the general features and applications of DDS focused on the covalent conjugation system that binds the antibody carrier to the cytotoxic drug.

GlyConnect-Ugi: site-selective, multi-component glycoprotein conjugations through GlycoDelete expressed glycans

Recently, the GlyConnect-oxime (GC) protein conjugation strategy was developed to provide a site-selective glycan-based conjugation strategy as an extension to the in-house developed GlycoDelete (GD) technology. GD gives access to glycoproteins with single GlcNAc, LacNAc, or LacNAc-Sia type glycans on their N-glycosylation sites. We have previously shown that these glycans provide a unique handle for site-selective conjugation as they provide a short, homogeneous and hydrophilic link to the protein backbone. GC focused on the use of chemical and chemo-enzymatic pathways for conjugation of a single molecule of interest via oxime formation or reductive amination. In the current work, we explore multicomponent reactions (MCR), namely Ugi and Passerini reactions, for GlycoDelete glycan directed, site-specific protein conjugation (MC-GC). The use of the Ugi and Passerini multicomponent reactions holds the potential of introducing multiple groups of interest in a single reaction step while creating a hydrophilic peptide-like linker.

Accelerated antibacterial red-carbon dots with photodynamic therapy against multidrug-resistant Acinetobacter baumannii

The emergence of antibiotic resistance in bacteria is a major public-health issue. Synthesis of efficient antibiotic-free material is very important for fighting bacterial infection-related diseases. Herein, red-carbon dots (R-CDs) with a broad range of spectral absorption (350-700 nm) from organic bactericides or intermediates were synthesized through a solvothermal route. The prepared R-CDs not only had intrinsic antibacterial activities, but also could kill multidrug-resistant bacteria (multidrug-resistant Acinetobacter baumannii (MRAB) and multidrug-resistant Staphylococcus aureus (MRSA)) effectively by generating reactive oxygen species. Furthermore, R-CDs could eliminate and inhibit the formation of MRAB biofilms, while conferring few side effects on normal cells. A unique property of R-CDs was demonstrated upon in vivo treatment of antibiotic-sensitive MRAB-induced infected wounds. These data suggested that this novel R-CDs-based strategy might enable the design of next-generation agents to fight drug-resistant bacteria.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material is available for this article at 10.1007/s40843-021-1770-0 and is accessible for authorized users.

Total synthesis of the O-antigen repeating unit of Providencia stuartii O49 serotype through linear and one-pot assemblies

Capsular polysaccharides of pathogenic bacteria have been reported to be effective vaccines against diseases caused by them. Providencia stuartii is a class of enterobacteria of the family Providencia that is responsible for several antibiotic resistant infections, particularly urinary tract infections of patients with prolonged catheterization in hospital settings. Towards the goal of development of vaccine candidates against this pathogen, we herein report the total synthesis of a trisaccharide repeating unit of the O-antigen polysaccharide of the P. stuartii O49 serotype containing the →6)-β-ᴅ-Galp-(1→3)-β-ᴅ-GalpNAc(1→4)-α-ᴅ-Galp(1→ linkage. The synthesis of the trisaccharide repeating unit was carried out first by a linear strategy involving the [1 + (1 + 1 = 2)] assembly, followed by a one-pot synthesis involving [1 + 1 + 1] strategy from the corresponding monosaccharides. The one-pot method provided a higher yield of the protected trisaccharide intermediate (73%) compared to the two step synthesis (66%). The protected trisaccharide was then deprotected and N-acetylated to finally afford the desired trisaccharide repeating unit as its α-p-methoxyphenyl glycoside.

Chemical synthesis of polysaccharide-protein and polysaccharide-peptide conjugates: A review

Polysaccharides are abundant natural polymers, which in nature are at times covalently modified with peptides and proteins. Polysaccharide-protein or polysaccharide-peptide conjugates, natural or otherwise, may have increased solubility, improved emulsion properties, prolonged circulation time, reduced immunogenicity, and enhanced selectivity for targeting specific tissues compared to native peptides and proteins. In this paper, we will review recent advances in synthetic methods for producing polysaccharide-protein conjugates and discuss their advantages with a focus on drug targeting.

Ligation, Macrocyclization, and Simultaneous Functionalization of Peptides by Multicomponent Reactions (MCR)

Multicomponent reactions (MCRs) are recently expanding the plethora of solid-phase protocols for the synthesis and derivatization of peptides. Herein, we describe a solid-phase-compatible strategy based on MCRs as a powerful strategy for peptide cyclization and ligation . We illustrate, using Gramicidin S as a model peptide, how the execution of on-resin Ugi reactions enables the simultaneous backbone N-functionalization and cyclization, which are important types of derivatizations in peptide-based drug development or for incorporation of conjugation handles, or labels.

One-pot synthesis of Acanthus ilicifolius Linn alkaloid 2-benzoxazolinone derivatives via a tandem Ugi 4-component coupling/haloform cyclization

A one-pot, base-mediated approach to Acanthus ilicifolius Linn alkaloid 2-benzoxazolinone derivatives is developed. Starting from trichloroacetic acid, o-aminophenol, substituted benzaldehydes and alkyl isocyanides, the desired 2-benzoxazolinone derivatives are obtained in good yields via a tandem Ugi condensation and intramolecular haloform cyclization at room temperature in the presence of Et3N.

Polyoxazolines with a Vicinally Double-Bioactivated Terminus for Biomacromolecular Affinity Assessment

Interactions between proteins and carbohydrates with larger biomacromolecules, e.g., lectins, are usually examined using self-assembled monolayers on target gold surfaces as a simplified model measuring setup. However, most of those measuring setups are either limited to a single substrate or do not allow for control over ligand distance and spacing. Here, we develop a synthetic strategy, consisting of a cascade of a thioesterification, native chemical ligation (NCL) and thiol-ene reaction, in order to create three-component polymer conjugates with a defined double bioactivation at the chain end. The target architecture is the vicinal attachment of two biomolecule residues to the α telechelic end point of a polymer and a thioether group at the ω chain end for fixating the conjugate to a gold sensor chip surface. As proof-of-principle studies for affinity measurements, we demonstrate the interaction between covalently bound mannose and ConA in surface acoustic wave (SAW) and surface plasmon resonance (SPR) experiments.

Glycoconjugate vaccines against Salmonella enterica serovars and Shigella species: existing and emerging methods for their analysis

The global spread of enteric disease, the increasingly limited options for antimicrobial treatment and the need for effective eradication programs have resulted in an increased demand for glycoconjugate enteric vaccines, made with carbohydrate-based membrane components of the pathogen, and their precise characterisation. A set of physico-chemical and immunological tests are employed for complete vaccine characterisation and to ensure their consistency, potency, safety and stability, following the relevant World Health Organization and Pharmacopoeia guidelines. Variable requirements for analytical methods are linked to conjugate structure, carrier protein nature and size and O-acetyl content of polysaccharide. We investigated a key stability-indicating method which measures the percent free saccharide of Salmonella enterica subspecies enterica serovar Typhi capsular polysaccharide, by detergent precipitation, depolymerisation and HPAEC-PAD quantitation. Together with modern computational approaches, a more precise design of glycoconjugates is possible, allowing for improvements in solubility, structural conformation and stability, and immunogenicity of antigens, which may be applicable to a broad spectrum of vaccines. More validation experiments are required to establish the most effective and suitable methods for glycoconjugate analysis to bring uniformity to the existing protocols, although the need for product-specific approaches will apply, especially for the more complex vaccines. An overview of current and emerging analytical approaches for the characterisation of vaccines against Salmonella Typhi and Shigella species is described in this paper. This study should aid the development and licensing of new glycoconjugate vaccines aimed at the prevention of enteric diseases.

On-resin multicomponent protocols for biopolymer assembly and derivatization

Solid-phase synthesis represents the methodological showcase for technological advances such as split-and-pool combinatorial chemistry and the automated synthesis of peptides, nucleic acids and polysaccharides. These strategies involve iterative coupling cycles that do not generate functional diversity besides that incorporated by the amino acids, nucleosides and monosaccharide building blocks. In sharp contrast, multicomponent reactions (MCRs) are traditionally used to generate both skeletal and appendage diversity in short, batchwise procedures. On-resin MCRs have traditionally been employed for the construction of heterocycle and peptidomimetic libraries, but that scenario has changed recently, and today the focus is more on the solid-phase derivatization of peptides and oligonucleotides. This review presents relevant experimental details and addresses the synthetic scope of such on-resin multicomponent protocols employed to accomplish specific biopolymer covalent modifications that are practically inviable by traditional solution-phase methodologies. Recommendations are provided to facilitate the implementation of solid-supported protocols and avoid possible pitfalls associated with the selection of the polymeric resin, the solvent and the order and amount of the reagents employed. We describe procedures comprising the multicomponent lipidation, biotinylation and labeling of both termini and the side chains, as well as the use of MCRs in the traceless on-resin synthesis of ligated and cyclic peptides. Solid-phase protocols for the assembly of α-helical and parallel β-sheet peptides as well as hybrid peptide-peptoid and peptide-peptide nucleic acid architectures are described. Finally, the solid-supported multicomponent derivatization of DNA oligonucleotides is illustrated as part of the DNA-encoded library technology relying on MCR-derived heterocyclic compounds.

One Reacts as Two: Applications of N-Isocyaniminotriphenylphosphorane in Diversity-Oriented Synthesis

N-Isocyaniminotriphenylphosphorane (NIITP) is a functionalized isonitrile that has been extensively applied in a variety of organic reactions during the last two decades. This Review summarizes the most important applications in organic synthesis of this versatile reactant, with the focus posed on mechanistic and methodological aspects allowing the generation of molecular diversity. NIITP combines the reactivity of isonitriles with that of phosphoranes to enable chemical transformations employed in the construction of compound libraries. Here, we cover from the initial applications of NIITP in the Nef isocyanide reaction to further derivations that render a variety of heterocyclic scaffolds. The presence of the isonitrile moiety in this singular compound makes possible the double addition of nucleophiles and electrophiles, which followed by inter(intra)molecular aza-Wittig type transformations enable several multicomponent and tandem processes. In particular, we stress the impact of NIITP in oxadiazole chemistry, from the early two-component transformations to recent examples of multicomponent reactions that take place in the presence of suitable electrophiles. In addition, we briefly describe the role of NIITP chemistry in generating skeletal and conformational diversity in cyclic peptides. The reaction of NIITP with alkynes is thoroughly revised, with particular emphasis on silver-catalyzed processes that have been developed in the last years. Biomedicinal applications of some reaction products are also mentioned along with a perspective of future applications of this reactant.

Expanding the Scope of Ugi Multicomponent Bioconjugation to Produce Pneumococcal Multivalent Glycoconjugates as Vaccine Candidates

Conjugate vaccines against encapsulated pathogens like Streptococcus pneumoniae face many challenges, including the existence of multiple serotypes with a diverse global distribution that constantly requires new formulations and higher coverage. Multivalency is usually achieved by combining capsular polysaccharide-protein conjugates from invasive serotypes, and for S. pneumoniae, this has evolved from 7- up to 20-valent vaccines. These glycoconjugate formulations often contain high concentrations of carrier proteins, which may negatively affect glycoconjugate immune response. This work broadens the scope of an efficient multicomponent strategy, leading to multivalent pneumococcal glycoconjugates assembled in a single synthetic operation. The bioconjugation method, based on the Ugi four-component reaction, enables the one-pot incorporation of two different polysaccharide antigens to a tetanus toxoid carrier, thus representing the fastest approach to achieve multivalency. The reported glycoconjugates incorporate three combinations of capsular polysaccharides 1, 6B, 14, and 18C from S. pneumoniae. The glycoconjugates were able to elicit functional specific antibodies against pneumococcal strains comparable to those shown by mixtures of the two monovalent glycoconjugates.

From Ugi Multicomponent Reaction to Linkers for Bioconjugation

Bioconjugation is a key approach for the development of novel molecular entities with clinical applications. The biocompatibility and specificity of biomolecules such as peptides, proteins, and antibodies make these macromolecules ideal carriers for selective targeted therapies. In this context, there is a need to develop new molecular units that cover the requirements of the next generation of targeted pharmaceuticals. Here, we present the design and development of a versatile and stable linker based on a N-alkylated α,α-dialkyl dipeptide for bioconjugation, with a particular focus on antibody-drug conjugates (ADCs). Starting with the well-known Ugi multicomponent reaction, the convenient chemical modification of the prepared adducts allowed us the obtention of versatile bifunctional linkers for bioconjugation. A conjugation strategy was tested to demonstrate the efficiency of the linker. In addition, a novel cytotoxic anti-HER2 ADC was prepared using the Ugi-linker approach.

Advances in biomolecule inspired polymeric material decorated interfaces for biological applications

With the development of surface modification technology, interface properties have great effects on the interaction between biomedical materials and cells and biomolecules, which significantly affects the biocompatibility and functionality of materials. As an orderly and perfect system, biological organisms in nature effectively integrate all kinds of bio-interfaces with physiological functions, which shed light on the importance of biomolecules in organisms. It gives birth to a bio-inspiration strategy to design and fabricate smart materials with specific functionalities, e.g. osteogenic and chondrocytic induced materials inspired by bone sialoprotein and chondroitin sulfate. Through this mimicking approach, various functional materials were utilized to decorate the interfaces and further optimize the performance of biomedical materials, which would widely expand their applications. In this review, followed by a summary and brief introduction of surface modification methods, we highlight recent advances in the fabrication of functional polymeric materials inspired by a range of biomolecules for decorating interfaces. Then, the other applications of biomolecule inspired materials including tissue engineering, diagnosis and treatment of diseases and physiological function regulation are presented and the future outlook is discussed as well.

Glycoconjugate vaccines: some observations on carrier and production methods

Glycoconjugate vaccines use protein carriers to improve the immune response to polysaccharide antigens. The protein component allows the vaccine to interact with T cells, providing a stronger and longer-lasting immune response than a polysaccharide interacting with B cells alone. Whilst in theory the mere presence of a protein component in a vaccine should be sufficient to improve vaccine efficacy, the extent of improvement varies. In the present review, a comparison of the performances of vaccines developed with and without a protein carrier are presented. The usefulness of analytical tools for macromolecular integrity assays, in particular nuclear magnetic resonance, circular dichroism, analytical ultracentrifugation and SEC coupled to multi-angle light scattering (MALS) is indicated. Although we focus mainly on bacterial capsular polysaccharide-protein vaccines, some consideration is also given to research on experimental cancer vaccines using zwitterionic polysaccharides which, unusually for polysaccharides, are able to invoke T-cell responses and have been used in the development of potential all-polysaccharide-based cancer vaccines.A general trend of improved immunogenicity for glycoconjugate vaccines is described. Since the immunogenicity of a vaccine will also depend on carrier protein type and the way in which it has been linked to polysaccharide, the effects of different carrier proteins and production methods are also reviewed. We suggest that, in general, there is no single best carrier for use in glycoconjugate vaccines. This indicates that the choice of carrier protein is optimally made on a case-by-case basis, based on what generates the best immune response and can be produced safely in each individual case.Abbreviations: AUC: analytical ultracentrifugation; BSA: bovine serum albumin; CD: circular dichroism spectroscopy; CPS: capsular polysaccharide; CRM197: Cross Reactive Material 197; DT: diphtheria toxoid; Hib: Haemophilius influenzae type b; MALS: multi-angle light scattering; Men: Neisseria menigitidis; MHC-II: major histocompatibility complex class II; NMR: nuclear magnetic resonance spectroscopy; OMP: outer membrane protein; PRP: polyribosyl ribitol phosphate; PSA: Polysaccharide A1; Sa: Salmonella; St.: Streptococcus; SEC: size exclusion chromatography; Sta: Staphylococcus; TT: tetanus toxoid; ZPS: zwitterionic polysaccharide(s).

Heterocyclic steroids: Efficient routes for annulation of pentacyclic steroidal pyrimidines

Steroids are components of cell membranes, signaling molecules and are a type of secondary metabolites as a result of their high impact of biological significance. The present review described the literature reports of pentacyclic steroidal pyrimidines as a type of heterocyclic steroids. The main sections included the synthesis of the investigated steroids fused at rings-A or B or D of steroid skeleton, synthesis of binary or linked-type pyrimidines, pyrimidine oxides, macromolecules and mono- or di- or tri-peptides linked-steroidal pyrimidines. Besides, the present research highlighted the biological significance of steroidal pyrimidines, in which the compounds revealed potent anticancer, antioxidant, antibacterial, and anti-Alzheimer agents. In addition, some hetero-steroids were screened for binding DNA assay and gene expression analysis. It was settled that the incorporation of pyrimidine scaffold into steroid basic skeleton is crucial for better biological results.

Steroid diversification by multicomponent reactions

Reports on structural diversification of steroids by means of multicomponent reactions (MCRs) have significantly increased over the last decade. This review covers the most relevant strategies dealing with the use of steroidal substrates in MCRs, including the synthesis of steroidal heterocycles and macrocycles as well as the conjugation of steroids to amino acids, peptides and carbohydrates. We demonstrate that steroids are available with almost all types of MCR reactive functionalities, e.g., carbonyl, carboxylic acid, alkyne, amine, isocyanide, boronic acid, etc., and that steroids are suitable starting materials for relevant MCRs such as those based on imine and isocyanide. The focus is mainly posed on proving the amenability of MCRs for the diversity-oriented derivatization of naturally occurring steroids and the construction of complex steroid-based platforms for drug discovery, chemical biology and supramolecular chemistry applications.

Three-Component Protein Modification Using Mercaptobenzaldehyde Derivatives

A chemoselective primary amine modification strategy that enables the three-component, one-pot bioconjugation is described. The specifically designed, mercaptobenzaldehyde-based bifunctional linker achieves highly selective and robust amine labeling under biocompatible conditions. This linker demonstrates wide functional group tolerance and is simple to prepare, which allowed facile payload incorporation. Finally, our studies have shown that the introduction of linker does not impair the function of modified protein such as insulin.

Multicomponent Reaction Toolbox for Peptide Macrocyclization and Stapling

In the past decade, multicomponent reactions have experienced a renaissance as powerful peptide macrocyclization tools enabling the rapid creation of skeletal complexity and diversity with low synthetic cost. This review provides both a historical and modern overview of the development of the peptide multicomponent macrocyclization as a strategy capable to compete with the classic peptide cyclization methods in terms of chemical efficiency and synthetic scope. We prove that the utilization of multicomponent reactions for cyclizing peptides by either their termini or side chains provides a key advantage over those more established methods; that is, the possibility to explore the cyclic peptide chemotype space not only at the amino acid sequence but also at the ring-forming moiety. Owing to its multicomponent nature, this type of peptide cyclization process is well-suited to generate diversity at both the endo- and exo-cyclic fragments formed during the ring-closing step, which stands as a distinctive and useful characteristic for the creation and screening of cyclic peptide libraries. Examples of the novel multicomponent peptide stapling approach and heterocycle ring-forming macrocyclizations are included, along with multicomponent methods incorporating macrocyclization handles and the one-pot syntheses of macromulticyclic peptide cages. Interesting applications of this strategy in the field of drug discovery and chemical biology are provided.

Materials Functionalization with Multicomponent Reactions: State of the Art

The emergence of neoteric synthetic routes for materials functionalization is an interesting phenomenon in materials chemistry. In particular, the union of materials chemistry with multicomponent reactions (MCRs) opens a new avenue leading to the realm of highly innovative functionalized architectures with unique features. MCRs have recently been recognized as considerable part of the synthetic chemist's toolbox due to their great efficiency, inherent molecular diversity, atom and pot economy along with operational simplicity. Also, MCRs can improve E-factor and mass intensity as important green chemistry metrics. By rational tuning of the materials, as well as the MCRs, wide ranges of functionalized materials can be produced with tailorable properties that can play important roles in the plethora of applications. To date, there has not reported any exclusive review of a materials functionalization with MCRs. This critical review highlights the state-of-the-art on the one-pot functionalization of carbonaceous and siliceous materials, polysaccharides, proteins, enzymes, synthetic polymers, etc., via diverse kind of MCRs like Ugi, Passerini, Petasis, Khabachnik-Fields, Biginelli, and MALI reactions through covalent or noncovalent manners. Besides the complementary discussion of synthetic routes, superior properties and detailed applicability of each functionalized material in modern technologies are discussed. Our outlook also emphasizes future strategies for this unprecedented area and their use as materials for industrial implementation. With no doubt, MCRs-functionalization of materials bridges the gap between materials science domain and applied chemistry.

Multicomponent Reactions in Ligation and Bioconjugation Chemistry

Multicomponent reactions (MCRs) encompass an exciting class of chemical transformations that have proven success in almost all fields of synthetic organic chemistry. These convergent procedures incorporate three or more reactants into a final product in one pot, thus combining high levels of complexity and diversity generation with low synthetic cost. Striking applications of these processes are found in heterocycle, peptidomimetic, and natural product syntheses. However, their potential in the preparation of large macro- and biomolecular constructs has been realized just recently. This Account describes the most relevant results of our group in the utilization of MCRs for ligation/conjugation of biomolecules along with significant contributions from other laboratories that validate the utility of this special class of bioconjugation process. Thus, MCRs have proven to be efficient in the ligation of lipids to peptides and oligosaccharides as well as the ligation of steroids, carbohydrates, and fluorescent and affinity tags to peptides and proteins. In the field of glycolipids, we highlight the power of isocyanide-based MCRs with the one-pot double lipidation of glycan fragments functionalized as either the carboxylic acid or amine. In peptide chemistry, the versatility of the multicomponent ligation strategy is demonstrated in both solution-phase lipidation protocols and solid-phase procedures enabling the simultaneous lipidation and biotinylation of peptides. In addition, we show that MCRs are powerful methods for synchronized lipidation/labeling and macrocyclization of peptides, thus accomplishing in one step what usually requires long sequences. In the realm of protein bioconjugation, MCRs have also proven to be effective in labeling, site-selective modification, immobilization, and glycoconjugation processes. For example, we illustrate a successful application of multicomponent polysaccharide-protein conjugation with the preparation of multivalent glycoconjugate vaccine candidates by the ligation of two antigenic capsular polysaccharides of a pathogenic bacterium to carrier proteins. By highlighting the ability to join several biomolecules in only one synthetic operation, we hope to encourage the biomolecular chemistry community to apply this powerful chemistry to novel biomedicinal challenges.