Preparation of fibre-reinforced PLA-collagen@PLA-PCL@PCL-gelatin three-layer vascular graft by EDC/NHS cross-linking and its performance study

In this study, a three-layer small diameter artificial vascular graft with a structure similar to that of natural blood vessels was first constructed by triple-step electrospinning technology, in which polylactic acid (PLA) and collagen (COL) were used for the inner layer, polylactic acid and polycaprolactone (PCL) was used for the middle layer and polycaprolactone and gelatin was used for the outer layer. The properties of the artificial vascular graft were adjusted by the EDC/NHS cross-linking agent through the reaction between the collagen or gelatine and EDC/NHS. The mechanical and hydrophilic properties of the cross-linked artificial vessels were substantially enhanced, with a maximum stress of 9.56 MPa in the axial direction and 9.31 MPa in the radial direction for the P/C (4:1) vascular graft, which exceeded that of many textile-based and natural vascular grafts. The increased hydrophilicity of the inner layer of the vessel before crosslinking was due to the addition of COL, and the inner layer of the artificial vessel after crosslinking had a substantial increase in hydrophilicity due to the production of a more hydrophilic urea derivative. The increased hydrophilicity led to easier cell adhesion to the inner layer of the artificial vessel, especially for the P/C (2:1) vascular graft, where the cell proliferation rate and adhesion were high due to COL incorporation and cross-linking. The three-layer vascular grafts studied did not lead to haemolysis. Therefore, the EDC/NHS cross-linked three-layer vascular graft had good mechanical properties, hydrophilicity, anticoagulation and could enhance cell adhesion and proliferation.

Development of a Tri-Layered Vascular Construct and In Vitro Evaluation of Endothelization

Advances in the development of vascular substitutes for small-sized arteries are ongoing because the present grafts do not entirely meet the requirements of native equivalents and are suboptimal in clinical performance. This study aims to develop a tri-layered vascular construct mimicking natural tissue using polyester blends and to investigate its endothelization through in vitro studies as a potential small-caliber vascular graft. The innermost layer is obtained by dip coating as a tubular porous film with a lumen diameter of 3 mm and a pore size of ≤8 µm. Circumferentially aligned electrospun fiber (diameter 100-800 nm) with a deviation angle of 15° are deposited over the porous film forming the intermediate layer. The random electrospun fibers (diameter 100-1100 nm) deviating at different angles are wrapped as the outermost layer. The mechanical properties of the tri-layered vascular construct are determined to be 44.80 ± 14.80 MPa for Young's modulus and 4.25 ± 0.75 MPa for ultimate tensile strength. MTS and cell behavior studies show that the isolated human umbilical cord vein endothelial cells proliferate and line the lumen of the vascular substitute. The vascular construct developed, with its biomimetic architecture, mechanical features, size, and endothelization, can be tested with in vivo studies.

The Construction of Three-Layered Biomimetic Arterial Graft Balances Biomechanics and Biocompatibility for Dynamic Biological Reconstruction

The process of reconstructing an arterial graft is a complex and dynamic process that is subject to the influence of various mechanical factors, including tissue regeneration and blood pressure. The attainment of favorable remodeling outcomes is contingent upon the biocompatibility and biomechanical properties of the arterial graft. A promising strategy involves the emulation of the three-layer structure of the native artery, wherein the inner layer is composed of polycaprolactone (PCL) fibers aligned with blood flow, exhibiting excellent biocompatibility that fosters endothelial cell growth and effectively prevents platelet adhesion. The middle layer, consisting of PCL and polyurethane (PU), offers mechanical support and stability by forming a contractile smooth muscle ring and antiexpansion PU network. The outer layer, composed of PCL fibers with an irregular arrangement, promotes the growth of nerves and pericytes for long-term vascular function. Prioritizing the reconstruction of the inner and outer layers establishes a stable environment for intermediate smooth muscle growth. Our three-layer arterial graft is designed to provide the blood vessel with mechanical support and stability through nondegradable PU, while the incorporation of degradable PCL generates potential spaces for tissue ingrowth, thereby transforming our graft into a living implant.

Fabrication of heparinized bi-layered vascular graft with PCL/PU/gelatin co-electrospun and chitosan/silk fibroin/gelatin freeze-dried hydrogel for improved endothelialization and enhanced mechanical properties

Fabricating a biocompatible small-diameter vascular graft (< 6 mm) with mechanical properties similar to the natural vein and adding good anti-thrombogenic, endothelialization, and hyperplasia properties remains a challenge. To this end, we fabricated a heparinized bilayer graft to address this problem. The proposed bilayer sample consisted of a heparinized polycaprolactone (PCL), polyurethane (PU), and gelatin (G) co-electrospun inner layer and chitosan, gelatin, and silk fibroin freeze-dried hydrogel crosslinked with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) outer layer. The samples exhibited great ultimate stress, Young's module, and suture retention of 4.16±0.25MPa, 8.24±2.59MPa and 4.83±0.31N, respectively. The heparin release assay indicated a sustained release profile of around 70% after 4weeks, which can be attributed to the excellent control via emulsion. Furthermore, the heparinized samples demonstrated good anti-thrombogenic properties investigated in the platelet adhesion assay. For the outer layer, the hydrogel crosslinked with non-toxic materials was prepared through the freeze-drying method to achieve high porosity (64.63%), suitable for smooth muscle cell activity. Moreover, inner and outer layers showed high cell viability toward endothelial (78.96%) and smooth muscle cells (57.77%), respectively. Overall, the proposed heparinized graft exhibited excellent potential for vascular graft regeneration.

Multi-material electrospinning: from methods to biomedical applications

Electrospinning as a versatile, simple, and cost-effective method to engineer a variety of micro or nanofibrous materials, has contributed to significant developments in the biomedical field. However, the traditional electrospinning of single material only can produce homogeneous fibrous assemblies with limited functional properties, which oftentimes fails to meet the ever-increasing requirements of biomedical applications. Thus, multi-material electrospinning referring to engineering two or more kinds of materials, has been recently developed to enable the fabrication of diversified complex fibrous structures with advanced performance for greatly promoting biomedical development. This review firstly gives an overview of multi-material electrospinning modalities, with a highlight on their features and accessibility for constructing different complex fibrous structures. A perspective of how multi-material electrospinning opens up new opportunities for specific biomedical applications, i.e., tissue engineering and drug delivery, is also offered.

The Influence of Textile Structure Characteristics on the Performance of Artificial Blood Vessels

Cardiovascular disease is a major threat to human health worldwide, and vascular transplantation surgery is a treatment method for this disease. Often, autologous blood vessels cannot meet the needs of surgery. However, allogeneic blood vessels have limited availability or may cause rejection reactions. Therefore, the development of biocompatible artificial blood vessels is needed to solve the problem of donor shortage. Tubular fabrics prepared by textile structures have flexible compliance, which cannot be matched by other structural blood vessels. Therefore, biomedical artificial blood vessels have been widely studied in recent decades up to the present. This article focuses on reviewing four textile methods used, at present, in the manufacture of artificial blood vessels: knitting, weaving, braiding, and electrospinning. The article mainly introduces the particular effects of different structural characteristics possessed by various textile methods on the production of artificial blood vessels, such as compliance, mechanical properties, and pore size. It was concluded that woven blood vessels possess superior mechanical properties and dimensional stability, while the knitted fabrication method facilitates excellent compliance, elasticity, and porosity of blood vessels. Additionally, the study prominently showcases the ease of rebound and compression of braided tubes, as well as the significant biological benefits of electrospinning. Moreover, moderate porosity and good mechanical strength can be achieved by changing the original structural parameters; increasing the floating warp, enlarging the braiding angle, and reducing the fiber fineness and diameter can achieve greater compliance. Furthermore, physical, chemical, or biological methods can be used to further improve the biocompatibility, antibacterial, anti-inflammatory, and endothelialization of blood vessels, thereby improving their functionality. The aim is to provide some guidance for the further development of artificial blood vessels.

Precise Preparation of a Multilayer Tubular Cell Sheet with Well-Aligned Cells in Different Layers to Simulate Native Arteries

Compared with artificial vascular grafts, bottom-up tubular cell sheets (TCSs) without scaffolds have shown promise for patients with cardiovascular disease. However, TCS therapy also faces the challenges of lengthy maturation time, elaborate operation, and weak mechanical strength. In this work, a structured small-diameter vascular graft (SDVG), consisting of three layers of TCSs, with different cell types and arrangements, was fabricated using layer-by-layer assembly of naturally formed TCSs and further cell culture. To this end, a surface-patterned collagen-coated cylindrical substrate was designed for the efficient harvesting of naturally formed and well-aligned TCSs. The patterned collagen (type I) layer facilitated the adhesion and orientation of cells, and a continuous tubular cell monolayer was naturally formed after approximately 4 days in cell culture. Biocompatible near-infrared (NIR) light was used to trigger the photothermal phase transition of the collagen coated on the cylindrical substrate to dissociate the collagen layer. As a result, an intact TCS could be harvested within a few minutes. These naturally formed and well-aligned TCSs exhibited outstanding free-standing performance without rugosity, facilitating their operability and practical application. A ring tensile test showed that orientation was critical for improving the mechanical properties of TCSs. The layer-by-layer assembly of SDVGs not only is easy to manipulate and has a short preparation time but also overcomes the bottleneck of forming a hierarchically structured vascular graft. This approach shows promise for repairing damaged blood vessels.

In Vitro Differentiation of Myoblast Cell Lines on Spider Silk Scaffolds in a Rotating Bioreactor for Vascular Tissue Engineering

Functional construction of tissue-engineered vessels as an alternative to autologous vascular grafts has been shown to be feasible, however the proliferation of seeded smooth-muscle cells remains a limiting factor. We employed a rotating bioreactor system to improve myoblast cell differentiation on a spider silk scaffold for tissue-engineered vessel construction. C2C12 myofibroblast cells were seeded on the surface of spider silk scaffold constructs and cultivated in a rotating bioreactor system with a continuous rotation speed (1 rpm). Cell function, cell growth and morphological structure and expression of biomarkers were analyzed using scanning electron microscopy, the LIVE/DEAD^® assay, Western blot and quantitative real-time PCR analyses. A dense myofibroblast cell sheet could be developed which resembled native blood vessel muscular tissue in morphological structure and in function. Bioreactor perfusion positively affected cell morphology, and increased cell viability and cell differentiation. The expression of desmin, MYF5 and MEF2D surged as an indication of myoblast differentiation. Cell-seeded scaffolds showed a tear-down at 18 N when strained at a set speed (20 mm min^-1). Spider silk scaffolds appear to offer a reliable basis for engineered vascular constructs and rotating bioreactor cultivation may be considered an effective alternative to complex bioreactor setups to improve cell viability and biology.

An Investigation of the Constructional Design Components Affecting the Mechanical Response and Cellular Activity of Electrospun Vascular Grafts

Cardiovascular disease is anticipated to remain the leading cause of death globally. Due to the current problems connected with using autologous arteries for bypass surgery, researchers are developing tissue-engineered vascular grafts (TEVGs). The major goal of vascular tissue engineering is to construct prostheses that closely resemble native blood vessels in terms of morphological, mechanical, and biological features so that these scaffolds can satisfy the functional requirements of the native tissue. In this setting, morphology and cellular investigation are usually prioritized, while mechanical qualities are generally addressed superficially. However, producing grafts with good mechanical properties similar to native vessels is crucial for enhancing the clinical performance of vascular grafts, exposing physiological forces, and preventing graft failure caused by intimal hyperplasia, thrombosis, aneurysm, blood leakage, and occlusion. The scaffold's design and composition play a significant role in determining its mechanical characteristics, including suturability, compliance, tensile strength, burst pressure, and blood permeability. Electrospun prostheses offer various models that can be customized to resemble the extracellular matrix. This review aims to provide a comprehensive and comparative review of recent studies on the mechanical properties of fibrous vascular grafts, emphasizing the influence of structural parameters on mechanical behavior. Additionally, this review provides an overview of permeability and cell growth in electrospun membranes for vascular grafts. This work intends to shed light on the design parameters required to maintain the mechanical stability of vascular grafts placed in the body to produce a temporary backbone and to be biodegraded when necessary, allowing an autologous vessel to take its place.

New Forms of Electrospun Nanofibers Applied in Cardiovascular Field

Cardiovascular disease (CVD) is one of the leading causes of death worldwide. In recent years, regenerative medicine, tissue engineering and the development of new materials have become the focus of attention this field, and electrospinning technology to prepare nanofibrous materials for the treatment of cardiovascular diseases has attracted people's attention. Unlike previous reviews, this research enumerates the experimental methods and applications of electrospinning technology combined with nanofibrous materials in the directions of myocardial infarction repair, artificial heart valves, artificial blood vessels and cardiovascular patches from the perspective of cardiovascular surgery. In the end, this review also summarizes the limitations, unresolved technical challenges, and possible future directions of this technology for cardiovascular disease applications.

Porous Bilayer Vascular Grafts Fabricated from Electrospinning of the Recombinant Human Collagen (RHC) Peptide-Based Blend

Cardiovascular diseases, including coronary artery and peripheral vascular pathologies, are leading causes of mortality. As an alternative to autografts, prosthetic grafts have been developed to reduce the death rate. This study presents the development and characterization of bilayer vascular grafts with appropriate structural and biocompatibility properties. A polymer blend of recombinant human collagen (RHC) peptides and polycaprolactone (PCL) was used to build the inner layer of the graft by electrospinning and co-electrospinning the water-soluble polyethylene oxide (PEO) as sacrificial material together with PCL to generate the porous outer layer. The mechanical test demonstrated the bilayer scaffold’s appropriate mechanical properties as compared with the native vascular structure. Human umbilical vein endothelial cells (HUVEC) showed enhanced adhesion to the lumen after seeding on nanoscale fibers. Meanwhile, by enhancing the porosity of the microfibrous outer layer through the removal of PEO fibers, rat smooth muscle cells (A7r5) could proliferate and infiltrate the porous layer easily.

In vivo performance of electrospun tubular hyaluronic acid/collagen nanofibrous scaffolds for vascular reconstruction in the rabbit model

One of the main challenges of tissue-engineered vascular prostheses is restenosis due to intimal hyperplasia. The aim of this study is to develop a material for scaffolds able to support cell growth while tolerating physiological conditions and maintaining the patency of carotid artery model. Tubular hyaluronic acid (HA)-functionalized collagen nanofibrous composite scaffolds were prepared by sequential electrospinning method. The tubular composite scaffold has well-controlled biophysical and biochemical signals, providing a good matrix for the adhesion and proliferation of vascular endothelial cells (ECs), but resisting to platelets adhesion when exposed to blood. Carotid artery replacement experiment from 6-week rabbits showed that the HA/collagen nanofibrous composite scaffold grafts with endothelialization on the luminal surface could maintain vascular patency. At retrieval, the composite scaffold maintained good structural integrity and had comparable mechanical strength as the native artery. This study indicating that electrospun scaffolds combined with cells may become an alternative to prosthetic grafts for vascular reconstruction.

A biomimetic orthogonal-bilayer tubular scaffold for the co-culture of endothelial cells and smooth muscle cells

In blood vessels, endothelial cells (ECs) grow along the direction of blood flow, while smooth muscle cells (SMCs) grow circumferentially along the vessel wall. To mimic this structure, a polycaprolactone (PCL) tubular scaffold with orthogonally oriented bilayer nanofibers was prepared via electrospinning and winding. ECs were cultured on the inner layer of the scaffold with axial nanofibers and SMCs were cultured on the outer layer of the scaffold with circumferential nanofibers. Fluorescence images of the F-actin distribution of ECs and SMCs indicated that cells adhered, stretched, and proliferated in an oriented manner on the scaffold. Moreover, layers of ECs and SMCs formed on the scaffold after one month of incubation. The expression levels of platelet-endothelial cell adhesion molecule 1 (PECAM-1) and a contractile SMC phenotype marker in the EC/SMC co-culture system were much higher than those in individual culture systems, thus demonstrating that the proposed biomimetic scaffold promoted the intercellular junction of ECs and preserved the contractile phenotype of SMCs.

To mimic blood vessels, a polycaprolactone tubular scaffold was prepared via electrospinning and winding. Endothelial cells were cultured on the inner layer with axial nanofibers and smooth muscle cells were cultured on the outer layer with circumferential nanofibers.

Hollow fibers: from fabrication to applications

Hollow fibers have attracted more and more attention due to their broad range of applications in numerous fields. We review the latest advance and summarize the fabrication methods, types and applications of hollow fibers. We mainly introduce the fabrication methods of hollow fibers, including co-extrusion/co-axial spinning methods, template methods, 3D printing methods, electrospinning methods, self-crimping methods and gas foaming process. Meanwhile, we summarize four types of hollow fibers: one-layered hollow fibers, multi-layered hollow fibers, multi-hollow fibers and branched hollow fibers. Next, we focus on the main applications of hollow fibers, such as gas separation, cell culture, microfluidic channels, artificial tubular tissues, etc. Finally, we present the prospects of the future trend of development. The review would promote the further development of hollow fibers and benefit their advance in sensing, bioreactors, electrochemical catalysis, energy conversion, microfluidics, gas separation, air purification, drug delivery, functional materials, cell culture and tissue engineering. This review has great significance for the design of new functional materials and development of devices and systems in the related fields.

Vascular cell behavior on heparin-like polymers modified silicone surfaces: The prominent role of the lotus leaf-like topography

Vascular cell behavior on material surfaces, such as heparin-like polymers, can be affected by the surface chemical composition and surface topological structure. In this study, the effects of heparin-like polymers and lotus leaf-like topography on surface vascular cell behavior are considered. By combining multicomponent thermo-curing and replica molding, a polydimethylsiloxane surface containing bromine (PDMS-Br) with lotus leaf-like topography is obtained. Heparin-like polymers with different chemical compositions are grafted onto PDMS-Br surfaces using visible-light-induced graft polymerization. Compared with unmodified PDMS-Br, surfaces modified by sulfonate-containing polymers are more friendly to vascular cells, while those modified by a glyco-polymer are much more resistant to vascular cells. The introduction of lotus leaf-like topography results in different degrees of decrease in cell density on different heparin-like polymer-modified surfaces. In addition, the combination of heparin-like polymers and lotus leaf-like topography results in the change in protein adsorption, indicating that the two factors may affect the surface vascular cell behavior by affecting the adsorption of relative proteins. The combination of bionic surface topography and different chemical components of heparin-like polymers on material surfaces suggests a new way of engineering cell-material interactions.

Heparinization and hybridization of electrospun tubular graft for improved endothelialization and anticoagulation

Constructing biomimetic structure and immobilizing antithrombus factors are two effective methods to ensure rapid endothelialization and long-term anticoagulation for small-diameter vascular grafts. However, few literatures are available regarding simultaneous implementation of these two strategies. Herein, a nano-micro-fibrous biomimetic graft with a heparin coating was prepared via a step-by-step in situ biosynthesis method to improve potential endothelialization and anticoagulation. The 4-mm-diameter tubular graft consists of electrospun cellulose acetate (CA) microfibers and entangled bacterial nanocellulose (BNC) nanofibers with heparin coating on dual fibers. The hybridized and heparinized graft possesses suitable pore structure that facilitates endothelia cells adhesion and proliferation but prevents infiltration of fibrous tissue and blood leakage. In addition, it shows higher mechanical properties than those of bare CA and hybridized CA/BNC grafts, which match well with native blood vessels. Moreover, this dually modified graft exhibits improved blood compatibility and endothelialization over the counterparts without hybridization or heparinization according to the testing results of platelet adhesion, cell morphology, and protein expression of von Willebrand Factor. This novel graft with dual modifications shows promising as a new small-diameter vascular graft. This study provides a guidance for promoting endothelialization and blood compatibility by dual modifications of biomimetic structure and immobilized bioactive molecules.

Melt Electrowriting of Complex 3D Anatomically Relevant Scaffolds

The manufacture of fibrous scaffolds with tailored micrometric features and anatomically relevant three-dimensional (3D) geometries for soft tissue engineering applications remains a great challenge. Melt electrowriting (MEW) is an advanced additive manufacturing technique capable of depositing predefined micrometric fibers. However, it has been so far inherently limited to simple planar and tubular scaffold geometries because of the need to avoid polymer jet instabilities. In this work, we surmount the technical boundaries of MEW to enable the manufacture of complex fibrous scaffolds with simultaneous controlled micrometric and patient-specific anatomic features. As an example of complex geometry, aortic root scaffolds featuring the sinuses of Valsalva were realized. By modeling the electric field strength associated with the MEW process for these constructs, we found that the combination of a conductive core mandrel with a non-conductive 3D printed model reproducing the complex geometry minimized the variability of the electric field thus enabling the accurate deposition of fibers. We validated these findings experimentally and leveraged the micrometric resolution of MEW to fabricate unprecedented fibrous aortic root scaffolds with anatomically relevant shapes and biomimetic microstructures and mechanical properties. Furthermore, we demonstrated the fabrication of patient-specific aortic root constructs from the 3D reconstruction of computed tomography clinical data.

Artificial small-diameter blood vessels: materials, fabrication, surface modification, mechanical properties, and bioactive functionalities

Cardiovascular diseases, especially ones involving narrowed or blocked blood vessels with diameters smaller than 6 millimeters, are the leading cause of death globally. Vascular grafts have been used in bypass surgery to replace damaged native blood vessels for treating severe cardio- and peripheral vascular diseases. However, autologous replacement grafts are not often available due to prior harvesting or the patient's health. Furthermore, autologous harvesting causes secondary injury to the patient at the harvest site. Therefore, artificial blood vessels have been widely investigated in the last several decades. In this review, the progress and potential outlook of small-diameter blood vessels (SDBVs) engineered in vitro are highlighted and summarized, including material selection and development, fabrication techniques, surface modification, mechanical properties, and bioactive functionalities. Several kinds of natural and synthetic polymers for artificial SDBVs are presented here. Commonly used fabrication techniques, such as extrusion and expansion, electrospinning, thermally induced phase separation (TIPS), braiding, 3D printing, hydrogel tubing, gas foaming, and a combination of these methods, are analyzed and compared. Different surface modification methods, such as physical immobilization, surface adsorption, plasma treatment, and chemical immobilization, are investigated and are compared here as well. Mechanical requirements of SDBVs are also reviewed for long-term service. In vitro biological functions of artificial blood vessels, including oxygen consumption, nitric oxide (NO) production, shear stress response, leukocyte adhesion, and anticoagulation, are also discussed. Finally, we draw conclusions regarding current challenges and attempts to identify future directions for the optimal combination of materials, fabrication methods, surface modifications, and biofunctionalities. We hope that this review can assist with the design, fabrication, and application of SDBVs engineered in vitro and promote future advancements in this emerging research field.

Local Delivery of Dual MicroRNAs in Trilayered Electrospun Grafts for Vascular Regeneration

Globally growing problems related to cardiovascular diseases lead to a considerable need for synthetic vascular grafts. For small-caliber vascular prosthesis, it remains essential to fulfill rapid endothelialization, inhibit intimal hyperplasia, and prevent calcification for keeping patency. To modulate vascular regeneration, herein, we developed a bioactive trilayered tissue-engineered vascular graft encapsulating both microRNA-126 and microRNA-145 in the fibrous inner and middle layers, respectively. In vitro cell activities demonstrated that the trilayered electrospun membranes had significant biological advantages in enhanced growth and intracellular nitric oxide production of vascular endothelial cells, modulation of phenotypes of vascular smooth muscle cells (SMCs), and restraint of calcium deposition through fast-releasing microRNA-126 and slow-releasing microRNA-145. Histological and immunofluorescent analyses of in vivo implantation in a rat abdominal aorta interposition model suggested that the dual-microRNA-loading trilayered electrospun graft exerted a positive effect on accelerating endothelialization, improving contractile SMC regeneration, and promoting normal extracellular matrix formation. Meanwhile, the local bioactivity of microRNA-126 and microRNA-145 in the trilayered vascular graft could regulate inflammation and depress calcification possibly by facilitating transformation of macrophages into the anti-inflammatory M2 phenotype. These findings indicated that the trilayered electrospun graft by local delivery of dual microRNAs could be possibly used as a bioactive substitute for replacement of artificial small-caliber blood vessels.

Bioactive and mechanically stable hydroxyapatite patterning for rapid endothelialization of artificial vascular graft

Polymeric vascular grafts have been widely used in the vascular regeneration field because of their ease of application. However, synthetic polymer grafts have the severe problem of low biocompatibility, which may cause delayed endothelialization and hyperplasia. In this study, we fabricated a linear hydroxyapatite (HA) pattern on a silicon wafer and then transferred the pattern to a poly(L-lactic)-acid (PLLA) film for use as a tubular vascular graft. The HA pattern with its characteristic needle-like shape was successfully embedded into the PLLA. The HA-patterned PLLA film exhibited superior mechanical stability compared with that of a HA-coated PLLA film under bending, elongation, and in vitro circulation conditions, suggesting its suitability for use as a tubular vascular graft. In addition, the HA pattern guided rapid endothelialization by promoting proliferation of endothelial cells and their migration along the pattern. The hemocompatibility of the HA-patterned PLLA was also confirmed, with substantially fewer platelets adhered on its surface. Overall, in addition to good mechanical stability, the HA-patterned PLLA exhibited enhanced biocompatibility and hemocompatibility compared with pure PLLA.

Nanoscaled Biodegradable Metal-Polymeric Three-Dimensional Framework for Endothelial Cell Patterning and Sustained Angiogenesis

The current work describes the development of a nanoscaled biodegradable metal polymeric three-dimensional framework with controlled nanotherapeutic release for endothelial cell patterning and sustained angiogenesis for biomedical applications. Biocompatible polymers gelatin and PLGA were used as polymeric nanofibrous three-dimensional framework in a core-shell manner with the gelatin core containing a biodegradable and bioactive metal nanoframework of cobalt caged with PEGylated curcumin by coaxial electrospinning. FTIR results confirmed the presence of nanobioactives in the core region of a coaxial nanofiber. Scanning electron microscopic analysis of the coaxial nanofibrous system showed a three-dimensional architecture that favored endothelial cell adhesion, patterning, migration, and proliferation. The as-synthesized nanoscaled biodegradable metal polymeric three-dimensional core-shell nanofibers exhibited potent antibacterial efficacy. Further, it improved the endothelial cell patterning promoting angiogenesis. The high therapeutic potential of cobalt nanoframework in the nanofibers enhanced the production of vascular endothelial growth factor promoting angiogenesis that resulted in the earlier restoration of wounded tissue compared with untreated control in vivo animal models. The study opens up a new horizon in exploring biodegradable biosorbable metal nanoframework for biomaterial applications. Additionally, the present study opens up a new strategy in developing biodegradable biosorbable biomaterial with enhanced vascularization efficacy to the biomaterial, which is important for acceptance of these biomaterials into the host tissue.

Stiffness of Aligned Fibers Regulates the Phenotypic Expression of Vascular Smooth Muscle Cells

Electrospun uniaxially aligned ultrafine fibers show great promise in constructing vascular grafts mimicking the anisotropic architecture of native blood vessels. However, understanding how the stiffness of aligned fibers would impose influences on the functionality of vascular cells has yet to be explored. The present study aimed to explore the stiffness effects of electrospun aligned fibrous substrates (AFSs) on phenotypic modulation in vascular smooth muscle cells (SMCs). A stable jet coaxial electrospinning (SJCES) method was employed to generate highly aligned ultrafine fibers of poly(l-lactide- co-caprolactone)/poly(l-lactic acid) (PLCL/PLLA) in shell-core configuration with a remarkably varying stiffness region from 0.09 to 13.18 N/mm. We found that increasing AFS stiffness had no significant influence on the cellular shape and orientation along the fiber direction with the cultured human umbilical artery SMCs (huaSMCs) but inhibited the cell adhesion rate, promoted cell proliferation and migration, and especially enhanced the F-actin fiber assembly in the huaSMCs. Notably, higher fiber stiffness resulted in significant downregulation of contractile markers like alpha-smooth muscle actin (α-SMA), smooth muscle myosin heavy chain, calponin, and desmin, whereas upregulated the gene expression of pathosis-associated osteopontin ( OPN) in the huaSMCs. These results allude to the phenotype of huaSMCs on stiffer AFSs being miserably modulated into a proliferative and pathological state. Consequently, it adversely affected the proliferation and migration behavior of human umbilical vein endothelial cells as well. Moreover, stiffer AFSs also revealed to incur significant upregulation of inflammatory gene expression, such as interleukin-6 ( IL-6), monocyte chemoattractant protein-1 ( MCP-1), and intercellular adhesion molecule-1 ( ICAM-1), in the huaSMCs. This study stresses that although electrospun aligned fibers are capable of modulating native-like oriented cell morphology and even desired phenotype realization or transition, they might not always direct cells into correct functionality. The integrated fiber stiffness underlying is thereby a critical parameter to consider in engineering structurally anisotropic tissue-engineered vascular grafts to ultimately achieve long-term patency.

Target regulation of both VECs and VSMCs by dual-loading miRNA-126 and miRNA-145 in the bilayered electrospun membrane for small-diameter vascular regeneration

Clinical utility of small-diameter vascular grafts is still challenging in blood vessel regeneration owing to thrombosis and intimal hyperplasia. To cope with the issues, modulation of gene expression via microRNAs (miRNAs) could be a feasible approach by rational regulating physiological activities of both vascular endothelial cells (VECs) and vascular smooth muscle cells (VSMCs). Our previous studies demonstrated that individually loaded miRNA-126 (miR-126) or miRNA-145 (miR-145) in the electrospun membranes showed the tendency to promote vascular regeneration. In this work, the bilayered electrospun graft in 1.5-mm diameter was developed by emulsion electrospinning to dual-load miR-126 and miR-145 for target regulation of both VECs and VSMCs, respectively. Accelerated release of miR-126 was achieved by introducing poly(ethylene glycol) in the inner electrospun poly(ethylene glycol)-b-poly(l-lactide-co-caprolactone) ultrafine fibrous membrane, reaching 61.3 ± 1.2% of the cumulative release in the initial 10 days, whereas the outer electrospun poly(l-lactide-co-glycolide) membrane composed of microfibers fulfilled prolonged release of miR-145 for about 56 days. In vivo tests suggested that dual-loading with miR-126 and miR-145 in the bilayered electrospun membranes could modulate both VECs and VSMCs for rapid endothelialization and hyperplasia inhibition as well. It is reasonably expected that dual target-delivery of miR-126 and miR-145 in the electrospun vascular grafts has effective potential for small-diameter vascular regeneration. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 371-382, 2019.

Synergistic Effects of Electrical Stimulation and Aligned Nanofibrous Microenvironment on Growth Behavior of Mesenchymal Stem Cells

Incontrollable cellular growth behavior is a significant issue, which severely affects the functional tissue formation and cellular protein expression. Development of natural extracellular matrix (ECM) like biomaterials to present microenvironment cues for regulation of cell responses can effectively overcome this problem. The external simulation and topological characteristics as typical guiding cues are capable of providing diverse influences on cellular growth. Herein, we fabricated two-dimensional aligned conductive nanofibers (2D-ACNFs) by an electrospinning process and surface polymerization, and the obtained 2D-ACNFs provided the effects of both alignment and electrical stimulation (ES) on cellular response of human mesenchymal cells (hMSCs). The results of cellular responses implied that the obtained 2D-ACNFs could offer a synergistic effect of both ES and aligned nanopattern on hMSC growth behavior. The effects could not only promote hMSCs to contact each other and maintain cellular activity but also provide positive promotion to regulate cellular proliferation. Thus, we believe that the obtained 2D-ACNFs will have a broad application in the biomedical field, such as cell culture with ES, directional induction for cell growth, and damaged tissue repair, etc.