Electrochemical and Photoelectrochemical Immunosensors for the Detection of Ovarian Cancer Biomarkers

Photoelectrochemical (PEC) sensing is an emerging technological innovation for monitoring small substances/molecules in biological or non-biological systems. In particular, there has been a surge of interest in developing PEC devices for determining molecules of clinical significance. This is especially the case for molecules that are markers for serious and deadly medical conditions. The increased interest in PEC sensors to monitor such biomarkers can be attributed to the many apparent advantages of the PEC system, including an enhanced measurable signal, high potential for miniaturization, rapid testing, and low cost, amongst others. The growing number of published research reports on the subject calls for a comprehensive review of the various findings. This article is a review of studies on electrochemical (EC) and PEC sensors for ovarian cancer biomarkers in the last seven years (2016-2022). EC sensors were included because PEC is an improved EC; and a comparison of both systems has, expectedly, been carried out in many studies. Specific attention was given to the different markers of ovarian cancer and the EC/PEC sensing platforms developed for their detection/quantification. Relevant articles were sourced from the following databases: Scopus, PubMed Central, Web of Science, Science Direct, Academic Search Complete, EBSCO, CORE, Directory of open Access Journals (DOAJ), Public Library of Science (PLOS), BioMed Central (BMC), Semantic Scholar, Research Gate, SciELO, Wiley Online Library, Elsevier and SpringerLink.

β-Bi2O3 Nanosheets Functionalized with Bisphenol A Synthetic Receptors: A Novel Material for Sensitive Photoelectrochemical Platform Construction

In this study, β-Bi₂O₃ nanosheets functionalized with bisphenol A (BPA) synthetic receptors were developed by a simple molecular imprinting technology and applied as the photoelectric active material for the construction of a BPA photoelectrochemical (PEC) sensor. BPA was anchored on the surface of β-Bi₂O₃ nanosheets via the self-polymerization of dopamine monomer in the presence of a BPA template. After the elution of BPA, the BPA molecular imprinted polymer (BPA synthetic receptors)-functionalized β-Bi₂O₃ nanosheets (MIP/β-Bi₂O₃) were obtained. Scanning electron microscopy (SEM) of MIP/β-Bi₂O₃ revealed that the surface of β-Bi₂O₃ nanosheets was covered with spherical particles, indicating the successful polymerization of the BPA imprinted layer. Under the best experimental conditions, the PEC sensor response was linearly proportional to the logarithm of BPA concentration in the range of 1.0 nM to 1.0 μM, and the detection limit was 0.179 nM. The method had high stability and good repeatability, and could be applied to the determination of BPA in standard water samples.

Photoelectrochemical immunoassay for thyroglobulin on nanogold-functionalized BiVO4 photoanode coupling with enzymatic biocatalytic precipitation

Methods derived from photoelectrochemical (PEC) have been constructed for immunoassays, but most involve the split-type immunoreaction modes, and thus easily cause unpredictable intermediate precision. Herein, we innovatively designed an integrated PEC immunosensing platform for the quantitative monitoring of thyroglobulin (TG) on the gold nanoparticles (AuNPs)-functionalized BiVO₄ photoanode coupling with enzymatic biocatalytic precipitation (EBCP). This sensing system could simultaneously implement the immunoreaction and photocurrent measurement. Anti-TG capture antibodies were modified onto AuNPs-decorated BiVO₄ photoelectrode. A sandwich-type immunoreaction was carried out in the presence of target TG using horseradish peroxidase (HRP)-conjugated anti-TG detection antibody. The carried HRP molecules catalyzed 4-chloro-1-naphthol (4-CN) to generate an insoluble benzo-4-chlorohexadienone product on the photoanode in the presence of peroxide hydrogen, thereby decreasing the photocurrent. Under optimal conditions, the PEC immunosensors gave good photocurrent responses toward target TG within the dynamic range of 0.01-10 ng mL^-1 at a detection limit of 7.6 pg mL^-1. Good repeatability and precision, high specificity and acceptable storage stability were acquired during the measurement. No significant differences were encountered for screening 15 human serum specimens between the developed PEC immunoassay and commercially available enzyme-linked immunosorbent assay (ELISA) method for the detection of target TG. Significantly, PEC immunosensing system offers promise for simple and cost-effective analysis of disease-related biomarkers.

2D carbon materials based photoelectrochemical biosensors for detection of cancer antigens

Cancer is a leading cause of death globally and early diagnosis is of paramount importance for identifying appropriate treatment pathways to improve cancer patient survival. However, conventional methods for cancer detection such as biopsy, CT scan, magnetic resonance imaging, endoscopy, X-ray and ultrasound are limited and not efficient for early cancer detection. Advancements in molecular technology have enabled the identification of various cancer biomarkers for diagnosis and prognosis of the deadly disease. The detection of these biomarkers can be done by biosensors. Biosensors are less time consuming compared to conventional methods and has the potential to detect cancer at an earlier stage. Compared to conventional biosensors, photoelectrochemical (PEC) biosensors have improved selectivity and sensitivity and is a suitable tool for detecting cancer agents. Recently, 2D carbon materials have gained interest as a PEC sensing platform due to their high surface area and ease of surface modifications for improved electrical transfer and attachment of biorecognition elements. This review will focus on the development of 2D carbon nanomaterials as electrode platform in PEC biosensors for the detection of cancer biomarkers. The working principles, biorecognition strategies and key parameters that influence the performance of the biosensors will be critically discussed. In addition, the potential application of PEC biosensor in clinical settings will also be explored, providing insights into the future perspective and challenges of exploiting PEC biosensors for cancer diagnosis.

Two-Dimensional Graphitic Carbon Nitride (g-C3N4) Nanosheets and Their Derivatives for Diagnosis and Detection Applications

The early diagnosis of certain fatal diseases is vital for preventing severe consequences and contributes to a more effective treatment. Despite numerous conventional methods to realize this goal, employing nanobiosensors is a novel approach that provides a fast and precise detection. Recently, nanomaterials have been widely applied as biosensors with distinctive features. Graphite phase carbon nitride (g-C₃N₄) is a two-dimensional (2D) carbon-based nanostructure that has received attention in biosensing. Biocompatibility, biodegradability, semiconductivity, high photoluminescence yield, low-cost synthesis, easy production process, antimicrobial activity, and high stability are prominent properties that have rendered g-C₃N₄ a promising candidate to be used in electrochemical, optical, and other kinds of biosensors. This review presents the g-C₃N₄ unique features, synthesis methods, and g-C₃N₄-based nanomaterials. In addition, recent relevant studies on using g-C₃N₄ in biosensors in regard to improving treatment pathways are reviewed.

Investigation of the inhibited biotoxicity of heavy metals towards 5- formylcytosine in rice by hydrochar based on photoelectrochemical biosensor

A photoelectrochemical (PEC) biosensor was constructed for 5-formylcytosine (5fC) nucleotide detection based on Ag₂S@WS₂ photoactive material and FeVO₄ catalytic signal quenching. After Ag₂S@WS₂ was modified onto the ITO substrate surface, 5fC recognition reagent of Au@4-amino3hydrazino5mercapto-1,2,4-triazol (Au@AHMT) was further modified through electrostatic adsorption. Afterwards, based on the specific chemical reaction between -NH₂ and -CHO, 5fC can be selectively recognized and captured. Subsequently, the nanoenzyme of FeVO₄ was recognized based on the specific reaction between the phosphate group of 5fC nucleotide and Fe³⁺. Under the catalysis of FeVO₄, the 4-chloro-1-naphthol in the detection solution can be oxidized to generate a precipitate, which will be retained on the electrode surface to inhibit the PEC signal. The developed method presented a widely dynamic range from 0.1 to 400 nM. The detection limit was 0.062 nM (3σ). This method also showed good detection selectivity, reproducibility and stability. The applicability was verified by investigating 5fC content change in genomic DNA of rice tissues after incubated with heavy metals. Moreover, the inhibited influence of hydrochar towards heavy metals was also assessed.

Enhanced photoactivity of ZnPc@WS2 heterojunction by CuBi2O4 and its application for photoelectrochemical detection of 5-formyl-2'-deoxycytidine

The endogenous epigenetic marker 5-formylcytosine (5 fC) is introduced by 5-methylcytosine (5 mC) oxidation under action of enzyme oxidation, and plays an important role in many life activities. Since the content of 5 fC in mammalian tissues and cells is very low, it is necessary to exploit a sensitive and specific detection method to further understand the function of 5 fC. In this work, a sensitively and selectively photoelectrochemical (PEC) biosensor was developed for 5-formyl-2'-deoxycytidine (5fdC) detection. CuBi₂O₄/ZnPc@WS₂ was used as photoactive material, where the formed ternary heterojunction structure greatly enhanced the PEC response and increased the detection sensitivity. Positively charged polyethyleneimine (PEI) was employed as 5fdC recognition and capture unit, where the amine group on PEI specifically reacted with aldehyde group of 5fdC to form stable amide bond. 4-Carboxyphenylboronic acid (4-CPBA) was adopted as crosslinker for 5fdC and amino functionalized CuBi₂O₄ based on the covalent interaction between 1,3-diol bond on 5fdC and boric acid structure on 4-CPBA, and the covalent interaction between -COOH on 4-CPBA and -NH₂ on amino functionalized CuBi₂O₄. On the basis of the positive synergistic effect of ZnPc and CuBi₂O₄ on improving the photoelectric performance of WS₂, the separation of photo-generated electron-hole pairs in semiconductors were promoted, and the examination range was expanded from 0.1 to 500 nM, and the detection limit was 0.0483 nM (3σ). Based on the unique covalent reaction between -NH₂ and -CHO, the PEC biosensor has excellent detection sensitivity, and can even separate 5fdC from 5-methylcytosine deoxyribonucleoside and 5-hydroxymethylcytosine deoxyribonucleoside. The effect of antibiotics and heavy metals on the 5fdC content in wheat tissue genome has also been further investigated using this sensor.

TiO2-sensitized double-shell ZnCdS hollow nanospheres for photoelectrochemical immunoassay of carcinoembryonic antigen coupled with hybridization chain reaction-dependent Cu2+ quenching

A novel photoelectrochemical immunosensor was constructed to monitor carcinoembryonic antigen (CEA) based on hybridization chain reaction (HCR)-mediated in situ generation of copper nanoparticles (Cu NPs) and subsequent Cu²⁺-dependent quenching reaction, in which titanium dioxide nanoparticles-sensitized double-shell zinc cadmium sulfide hollow nanospheres (TiO₂/DS-ZnCdS)-modified ITO electrode and anti-CEA antibody-modified 96-well plate served as biological recognition and signal detection platforms, respectively. The synergistic effect of TiO₂ NPs and DS-ZnCdS hollow nanospheres contributed to the improvement of photoelectric conversion efficiency, and HCR-mediated signal cascade benefited the enhancement of detection sensitivity. In the presence of CEA, biotin-labelled anti-CEA antibodies were immobilized onto anti-CEA antibody-modified 96-well plate, and triggered HCR process to form long double stranded DNA, which could adsorb a large number of Cu²⁺ ions and then in situ form Cu NPs on double stranded DNA template by a facile reduction reaction. After acid treatment, the dissolved Cu²⁺ ions could significantly reduce the photocurrent response due to the generation of Cu_xS. Under optimal conditions, the immunosensor exhibited a desirable liner range of 1 pg mL^-1 - 50 ng mL^-1 and a low detection limit of 0.1 pg mL^-1, as well as excellent selectivity and stability. Meanwhile, the recoveries of human serum sample analysis ranged from 96.8% to 103.6%, and the relative standard deviation was less than 7.40%, showing a good feasibility in early clinical diagnosis.

Confinement Growth of Layered WS2 in Hollow Beaded Carbon Nanofibers with Synergistic Anchoring Effect to Reinforce Li+ /Na+ Storage Performance

Novel nitrogen doped (N-doped) hollow beaded structural composite carbon nanofibers are successfully applied for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). Tungsten disulfide (WS₂ ) nanosheets are confined, through synergistic anchoring, on the surface and inside of hollow beaded carbon nanofibers (HB CNFs) via a hydrothermal reaction method to construct the hierarchical structure HB WS₂ @CNFs. Benefiting from this unique advantage, HB WS₂ @CNFs exhibits remarkable lithium-storage performance in terms of high rate capability (≈351 mAh g^-1 at 2 A g^-1 ) and stable long-term cycle (≈446 mAh g^-1 at 1 A g^-1 after 100 cycles). Moreover, as an anode material for SIBs, HB WS₂ @CNFs obtains excellent long cycle life and rate performance. During the charging/discharging process, the evolution of morphology and composition of the composite are analyzed by a set of ex situ methods. This synergistic anchoring effect between WS₂ nanosheets and HB CNFs is capable of effectively restraining volume expansion from the metal ions intercalation/deintercalation process and improving the cycling stability and rate performance in LIBs and SIBs.

A ratiometric electrochemiluminescence method using a single luminophore of porous g-C3N4 for the ultrasensitive determination of alpha fetoprotein

In this work, we report a simple ratiometric electrochemiluminescence method for ultra-sensitive immunoanalysis.

Recent progress of heterostructure-based photoelectrodes in photoelectrochemical biosensing: a mini review

The heterostructure photoelectrodes have witted the rapid development to improve the performance of PEC biosensors recently.

Cu2+-Modulated in situ growth of quantum dots for split-type photoelectrochemical immunoassay of prostate-specific antigen

A split-type photoelectrochemical immunosensor of PSA was developed using Cu²⁺-dependent catalytic oxidation for inhibiting the in situ growth of CdS QDs.

A ratiometric photoelectrochemical immunosensor based on g-C3N4@TiO2 NTs amplified by signal antibodies–Co3O4 nanoparticle conjugates

Herein, we report a ratiometric photoelectrochemical (PEC) immunosensor coupled with secondary antibodies–Co₃O₄ nanoparticle conjugates (Ab₂–Co₃O₄ NPs) for signal amplification.