One-step fabrication of a self-driven point-of-care chip by femtosecond laser direct writing and its application in cancer cell H2O2 detection via semiconductor-based SERS

Self-driven microfluidic systems have attracted significant attention and demonstrated great potential in the field of point-of-care (POC) testing due to their device simplicity, low power consumption, increased portability, and reduced sample consumption. To develop POC detection chips with diverse characteristics that meet different requirements, there is a strong demand for feasible strategies that enable easy operation and reduce processing time. Here, a one-step processing approach using femtosecond laser direct writing technology was proposed to fabricate a capillary-actuated POC microfluidic chip. The driving force of the chip is highly dependent on its surface wettability, which can be easily adjusted by changing the laser processing parameters. This POC microfluidic chip allowed for the detection of intracellular H2O2 through a catalytic reaction system that incorporated 5-aminosalicylic acid -sensitized colloidal TiO2 nanoparticles and horse radish peroxidase, with integrating semiconductor-based surface-enhanced Raman scattering (SERS) quantitative technique. The concentration of H2O2 was determined by the SERS signal of the catalytic products in the microfluidic chip, resulting in rapid detection with minimal sample consumption. Our method provides a simple, feasible, and alternative strategy for POC testing of H2O2, with a linear range of 10-2∼10-6 M and a limit of detection of 0.55 μM. This approach was successfully applied to rapid detection of intracellular H2O2 in MCF-7 breast cancer cells with high sensitivity and minimal sample consumption. Additionally, this study not only demonstrates the exceptional advantages of femtosecond laser processing technology in fabricating diverse microfluidic chips for various applications, but also presents an efficient POC testing strategy for detecting cell signaling molecules.

In situ forming an injectable hyaluronic acid hydrogel for drug delivery and synergistic tumor therapy

Stimulus-responsive injectable hydrogel has the key characteristics of in situ drug-loading ability and the controlled drug release, enabling efficient delivery and precise release of chemotherapy drugs at the tumor site, thereby being used as a local drug delivery system for sustained tumor treatment. This article designed a smart responsive injectable hydrogel loaded with anti-tumor drugs and nanoparticles to achieve efficient and specific synergistic treatment of tumors. Hyaluronic acid (HA) hydrogel obtained by cross-linking HA-SH (HS) and HA-Tyr (HT) through horseradish peroxidase (HRP), and doxorubicin hydrochloride (DOX) and folic acid-polyethylene glycol-amine (FA-PEG-NH2) modified PDA (denoted as PPF) were encapsulated to construct the HS/HT@PPF/D hydrogel. The hydrogel had good biocompatibility, injectability, and could respond to multiple stimuli at the tumor site, thereby achieving controlled drug release. At the same time, PPF gave it excellent photothermal efficiency, photothermal stability and tumor targeting. In vitro and in vivo experimental results showed that the HS/HT@PPF/D hydrogel combined with near-infrared laser irradiation could significantly improve its anti-tumor effect and could almost eliminate the entire tumor mass without obvious adverse reactions. The HS/HT@PPF/D hydrogel could achieve multi-stimulus-responsive drug delivery and be used for precise chemo-photothermal synergistic tumor treatment, thus providing a new platform for local synergistic tumor treatment.

Cross-Linking Methods of the Silk Protein Hydrogel in Oral and Craniomaxillofacial Tissue Regeneration

BACKGROUND

Craniomaxillofacial tissue defects are clinical defects involving craniomaxillofacial and oral soft and hard tissues. They are characterized by defect-shaped irregularities, bacterial and inflammatory environments, and the need for functional recovery. Conventional clinical treatments are currently unable to achieve regeneration of high-quality oral craniomaxillofacial tissue. As a natural biomaterial, silk fibroin (SF) has been widely studied in biomedicine and has broad prospects for use in tissue regeneration. Hydrogels made of SF showed excellent water retention, biocompatibility, safety and the ability to combine with other materials.

METHODS

To gain an in-depth understanding of the current development of SF, this article reviews the structure, preparation and application prospects in oral and craniomaxillofacial tissue regenerative medicine. It first briefly introduces the structure of SF and then summarizes the principles, advantages and disadvantages of the different cross-linking methods (physical cross-linking, chemical cross-linking and double network structure) of SF. Finally, the existing research on the use of SF in tissue engineering and the prospects of using SF with different cross-linking methods in oral and craniomaxillofacial tissue regeneration are also discussed.

CONCLUSIONS

This review is intended to show the advantages of SF hydrogels in tissue engineering and provides theoretical support for establishing novel and viable silk protein hydrogels for regeneration.

Smart responsive in situ hydrogel systems applied in bone tissue engineering

The repair of irregular bone tissue suffers severe clinical problems due to the scarcity of an appropriate therapeutic carrier that can match dynamic and complex bone damage. Fortunately, stimuli-responsive in situ hydrogel systems that are triggered by a special microenvironment could be an ideal method of regenerating bone tissue because of the injectability, in situ gelatin, and spatiotemporally tunable drug release. Herein, we introduce the two main stimulus-response approaches, exogenous and endogenous, to forming in situ hydrogels in bone tissue engineering. First, we summarize specific and distinct responses to an extensive range of external stimuli (e.g., ultraviolet, near-infrared, ultrasound, etc.) to form in situ hydrogels created from biocompatible materials modified by various functional groups or hybrid functional nanoparticles. Furthermore, "smart" hydrogels, which respond to endogenous physiological or environmental stimuli (e.g., temperature, pH, enzyme, etc.), can achieve in situ gelation by one injection in vivo without additional intervention. Moreover, the mild chemistry response-mediated in situ hydrogel systems also offer fascinating prospects in bone tissue engineering, such as a Diels-Alder, Michael addition, thiol-Michael addition, and Schiff reactions, etc. The recent developments and challenges of various smart in situ hydrogels and their application to drug administration and bone tissue engineering are discussed in this review. It is anticipated that advanced strategies and innovative ideas of in situ hydrogels will be exploited in the clinical field and increase the quality of life for patients with bone damage.

Hyaluronic acid-based hydrogels with tunable mechanics improved structural and contractile properties of cells

Extracellular matrix (ECM) regulates cellular responses through mechanotransduction. The standard approach of in vitro culturing on plastic surfaces overlooks this phenomenon, so there is a need for biocompatible materials that exhibit adjustable mechanical and structural properties, promote cell adhesion and proliferation at low cost and for use in 2D or 3D cell cultures. This study presents a new tunable hydrogel system prepared from high-molecular hyaluronic acid (HA), Bovine serum albumin (BSA), and gelatin cross-linked using EDC/NHS. Hydrogels with Young's moduli (E) ranging from subunit to units of kilopascals were prepared by gradually increasing HA and BSA concentrations. Concentrated high-molecular HA network led to stiffer hydrogel with lower cluster size and swelling capacity. Medium and oxygen diffusion capability of all hydrogels showed they are suitable for 3D cell cultures. Mechanical and structural changes of mouse embryonic fibroblasts (MEFs) on hydrogels were compared with cells on standard cultivation surfaces. Experiments showed that hydrogels have suitable mechanical and cell adhesion capabilities, resulting in structural changes of actin filaments. Lastly, applying hydrogel for a more complex HL-1 cell line revealed improved mechanical and electrophysiological contractile properties.

Fabrication of alginate-based hydrogel microparticle via ruthenium-catalyzed photocrosslinking

In this study, we developed an alginate-based microparticle production process via sodium ruthenium(II) tris-bipyridyl dication (Ru)/ammonium persulfate (SPS)-mediated visible light crosslinking system using a microfluidic device. Microparticles were prepared by crosslinking phenolic-substituted alginate (AlgPh) and incorporated gelatin (GelPh) in an aqueous solution containing SPS, which flowed into an ambient immiscible liquid paraffin-containing Ru using coaxial double orifice microfluidic device. The hydrogel microparticles appeared with the desired geometries and dimensions under optimal conditions. The concentration of AlgPh and light intensity were the most critical parameters for harvesting spherical microparticles with homogeneous size distribution. The physical properties of the prepared AlgPh microparticles were characterized and compared with Alg-Ca microparticles. Cell viability and proliferation preserved on AlgPh/GelPh hydrogel surfaces. Also, encapsulated cells in microparticles were also viable and proliferated well over 13 days after encapsulation. In brief, the results proved the feasibility of fabricating AlgPh vehicles via Ru/SPS-mediated system and visible light irradiation as a simple and efficient three-dimensional platform, which are applicable for various tissue engineering and cell delivery purposes.

Biocatalytic nitric oxide generating hydrogels with enhanced anti-inflammatory, cell migration, and angiogenic capabilities for wound healing applications

Although wound healing is a normal physiological process in the human body, it is often impaired by bacterial infections, ischemia, hypoxia, and excess inflammation, which can lead to chronic and non-healing wounds. Recently, injectable hydrogels with controlled nitric oxide (NO) release behaviour have become potential wound healing therapeutic agents due to their excellent biochemical, mechanical, and biological properties. Here, we proposed novel multifunctional NO-releasing hydrogels that could regulate various wound healing processes, including hemostasis, inflammation, cell proliferation and angiogenesis. By incorporating the copper nanoparticles (NPs) in the network of dual enzymatically crosslinked gelatin hydrogels (GH/Cu), NO was in situ produced via the Cu-catalyzed decomposition of endogenous RSNOs available in the blood, thus resolving the intrinsic shortcomings of NO therapies, such as the short storage and release time, as well as the burst and uncontrollable release modes. We demonstrated that the NO-releasing gelatin hydrogels enhanced the proliferation and migration of endothelial cells, while promoting the M2 (anti-inflammatory) polarization of the macrophage. Furthermore, the effects of NO release on angiogenesis were evaluated using an in vitro tube formation assay and in ovo chicken chorioallantoic membrane (CAM) assay, which revealed that GH/Cu hydrogels could significantly facilitate neovascularization, consistent with the in vivo results. Therefore, we suggested that these hydrogel systems would significantly enhance the wound healing process through the synergistic effects of the hydrogels and NO, and hence could be used as advanced wound dressing materials.

Exploration of the structural mechanism of hydrogen (H2)-promoted horseradish peroxidase (HRP) activity via multiple spectroscopic and molecular dynamics simulation techniques

Horseradish peroxidase (HRP) is an enzyme that is widely used in various fields. In this study, the effects of molecular hydrogen (H2) on the activity and structural characteristics of HRP were investigated by employing multiple spectroscopic techniques, atomic force microscopy (AFM) and molecular dynamics (MD) simulations. The results demonstrated that H2 could enhance HRP activity, especially in 1.5 mg/L hydrogen-rich water (HRW). The structural analysis results showed that H2 might alter HRP activity by affecting the active sites, secondary structure, hydrogen bonding network, CS groups, and morphological characteristics. The MD results also confirmed that H2 could increase the FeN bond distance in the active site, affect the secondary structure, and increase the number of hydrogen bonds. The MD results further suggested that H2 could increase the number of salt bridges, and lengthen the SS bonds in HRP. This study primarily revealed the mechanism by which H2 enhances the HRP activity, providing insight into the interactions between gas and macromolecular proteins. However, some of the results obtained via MD simulations still need to be verified experimentally. In addition, our study also provided a new convenient strategy to enhance enzyme activity.

Enzymatic Dimerization-Induced Self-Assembly of Alanine-Tyramine Conjugates into Versatile, Uniform, Enzyme-Loaded Organic Nanoparticles

Herein, we report a novel enzymatic dimerization-induced self-assembly (e-DISA) procedure that converts alanine-tyramine conjugates into highly uniform enzyme-loaded nanoparticles (NPs) or nanocontainers by the action of horseradish peroxidase (HRP) in an aqueous medium under ambient conditions. The NP formation was possible with both enantiomers of alanine, and the average diameter could be varied from 150 nm to 250 nm (with a 5-12 % standard deviation of as-prepared samples) depending on the precursor concentration. About 60 % of the added HRP enzyme was entrapped within the NPs and was subsequently utilized for post-synthetic modification of the NPs with phenolic compounds such as tyramine or tannic acid. One-pot multi-enzyme entrapment of glucose oxidase (GOx) and peroxidase (HRP) within the NPs was also achieved. These GOx-HRP loaded NPs allowed multimodal detection of glucose, including that present in human saliva, with a limit of detection (LoD) of 740 nM through fluorimetry. The NPs exhibited good cytocompatibility and were stable to changes in pH (acidic to basic), temperature, ultrasonication, and even the presence of organic solvent (EtOH) to a certain extent, since they are stabilized by intermolecular hydrogen bonding, π-π, and CH-π interactions. The proposed e-DISA procedure can be widely expanded through the design of diverse enzyme-responsive precursors.

Catalysis-based approaches with biopolymers and violet LED to improve in-office dental bleaching

This in vitro experimental investigation aimed to evaluate the impact of the combined application of a nanofiber scaffold (NS), a polymeric catalyst primer (PCP) containing 10 mg/mL of heme peroxidase enzyme, and violet LED (LEDv) on the esthetic efficacy (EE), trans-amelodentinal cytotoxicity (TC), and procedural duration of conventional in-office bleaching therapy. To achieve this, 96 standardized enamel/dentin discs were individually placed in artificial pulp chambers. A 35% hydrogen peroxide (H2O2) bleaching gel was administered for 45, 30, or 15 min to the enamel, either previously coated with NS + PCP or left uncoated, followed by irradiation with LEDv for 15 min or no irradiation. The established groups were as follows: G1, negative control (no treatment); G2, 35% H2O2/45 min; G3, NS + PCP + LEDv; G4, NS + PCP + 35%H2O2/45 min + LEDv; G5, NS + PCP + 35%H2O2/30 min + LEDv; and G6, NS + PCP + 35%H2O2/15 min + LEDv. Extracts (culture medium + gel components diffused through the discs) were collected and applied to odontoblast-like MDPC-23 cells. EE (ΔE00 and ΔWI) and TC were assessed using ANOVA/Tukey analysis (p < 0.05). The EE analysis revealed no statistical differences between G6 and G2 (p > 0.05). Cells in G6 exhibited higher viability and lower oxidative stress compared to other bleached groups (p < 0.05). In conclusion, employing NS + PCP + LEDv to catalyze a 35%H2O2 bleaching gel applied for 15 min to the enamel resulted in successful esthetic improvements and reduced the cytotoxicity commonly linked with traditional in-office bleaching procedures.

Gelatin microgel-coated balloon catheter with enhanced delivery of everolimus for long-term vascular patency

In-stent restenosis (ISR) after percutaneous coronary intervention is a major reason for limited long-term patency due to complex neointimal proliferation caused by vascular injury. Drug-coated balloon (DCB) has been developed to treat various cardiovascular diseases including ISR by providing anti-proliferative drugs into blood vessel tissues. However, a significant proportion of the drug is lost during balloon tracking, resulting in ineffective drug delivery to the target region. In this study, we report an everolimus-coated balloon (ECB) using everolimus-loaded gelatin-hydroxyphenyl propionic acid microgel (GM) with enhanced everolimus delivery to vascular walls for long-term patency. GM with high drug loading (> 97%) was simply prepared by homogenizing enzyme-mediated crosslinked hydrogels. The optimal condition to prepare GM-coated ECB (GM-ECB) was established by changing homogenization time and ethanol solvent concentration (30 ∼ 80%). In vitro sustained everolimus release for 30 d, and cellular efficacy using smooth muscle cells and vascular endothelial cells were evaluated. Additionally, an in vivo drug transfer levels of GM-ECB using rabbit femoral arteries were assessed with reduced drug loss and efficient drug delivery capability. Finally, using ISR-induced porcine models, effective in vivo vascular patency 4 weeks after treatment of ECBs was also confirmed. Thus, this study strongly demonstrates that GM can be used as a potential drug delivery platform for DCB application. STATEMENT OF SIGNIFICANCE: We report an ECB using everolimus-loaded GM prepared by homogenization of enzymatic cross-linked hydrogel. GM showed efficient drug loading (> 97 %) and controllable size. GM-ECB exhibited potential to deliver everolimus in a sustained manner to target area with drug efficacy and viability against SMC and EC. Although GM-ECB had much lower drug content compared to controls, animal study demonstrated enhanced drug transfer and reduced drug loss of GM-ECB due to the protection of encapsulated drugs by GM, and the possible interaction between GM and endothelium. Finally, vascular patency and safety were assessed using ISR-induced porcine models. We suggest an advanced DCB strategy to alleviate rapid drug clearance by bloodstream while improving drug delivery for a long-term vascular patency.

Photothermal-promoted multi-functional gallic acid grafted chitosan hydrogel containing tannic acid miniaturized particles for peri-implantitis

Peri-implantitis, a leading cause of implant failure, currently lacks effective therapeutic strategies. Given that bacterial infection and reactive oxygen species overabundance serve as primary pathogenic and triggering factors, respectively, an adhesive hydrogel has been created for in-situ injection. The hydrogel is a gallic acid-grafted chitosan (CS-GA) hydrogel containing tannic acid miniaturized particles (TAMP). This provides antibacterial and antioxidant properties. Therefore, this study aims to evaluate the potential role of this hydrogel in preventing and treating peri-implantitis via several experiments. It undergoes rapid formation within a span of over 20 s via an oxidative crosslinking reaction catalyzed by horseradish peroxidase and hydrogen peroxide, demonstrating robust adhesion, superior cell compatibility, and a sealing effect. Furthermore, the incorporation of TAMP offer photothermal properties to the hydrogel, enabling it to enhance the viability, migration, and antioxidant activity of co-cultured human gingival fibroblasts when subjected 0.5 W/cm2 808 nm near-infrared (NIR) irradiation. At higher irradiation power, the hydrogel exhibits progressive improvements in its antibacterial efficacy against Porphyromonas gingivalis and Fusobacterium nucleatum. It attains rates of 83.11 ± 5.42 % and 83.48 ± 6.855 %, respectively, under 1 W/cm2 NIR irradiation. In summary, the NIR-controlled CS-GA/TAMP hydrogel, exhibiting antibacterial and antioxidant properties, represents a promising approach for the prophylaxis and management of peri-implantitis.

Characterization of enzyme-crosslinked albumin hydrogel for cell encapsulation

Albumin is an attractive component for the development of biomaterials applied as biomedical implants, including drug carriers and tissue engineering scaffolds, because of its high biocompatibility and low immunogenicity. Additionally, albumin-based gelators facilitate cross-linking reactions under mild conditions, which maintains the high viability of encapsulated living cells. In this study, we synthesized albumin derivatives to undergo gelation under physiological conditions via the peroxidase-catalyzed formation of cross-links. Albumin was modified with phenolic hydroxyl groups (Alb-Ph-OH) using carbodiimide chemistry, and the effect of degree of substitution on gelation was investigated. Various properties of the Alb-Ph-OH hydrogels, namely the gelation time, swelling ratio, pore size, storage modulus, and enzymatic degradability, were easily controlled by adjusting the degree of substitution and the polymer concentration. Moreover, the viability of cells encapsulated within the Alb-Ph-OH hydrogel was high. These results demonstrate the potential applicability of Alb-Ph-OH hydrogels as cell-encapsulating materials for biomedical applications, including tissue engineering.

Optimizing the physical properties of collagen/hyaluronan hydrogels by inhibition of polyionic complexes formation at pH close to the collagen isoelectric point

Collagen/hyaluronan hydrogels with physical properties well suited for biomedical applications are challenging to synthesize due to the formation of polyionic complexes (PICs). A systematic physicochemical study was thus performed to determine novel conditions to inhibit the formation of collagen/hyaluronan PICs and obtain composite hydrogels with high physical properties. Using a range of pH from 1 to 5.5 and the addition of NaCl, type I collagen and tyramine-substituted hyaluronic acid (THA) solutions were mixed and analyzed by cryo-scanning electron microscopy and ATR-FTIR. PIC formation was inhibited at pH 1 without salt and at pH 2.5 and 5.5 in the presence of 400 mM NaCl. Interestingly, collagen fibrils were observed in solution at pH 5.5 before mixing with THA. After collagen gelling by pH increase, a homogeneous hydrogel consisting of collagen fibrils was only observed when PICs were inhibited. Then, the THA gelling performed by photo-crosslinking increased the rheological properties by four when hydrogels were formed with collagen/THA mixtures at pH 1 or 5.5 with salt. Taken together, these results show that a pH of 5.5, close to the collagen isoelectric point, enables the formation of collagen fibrils in solution, inhibits the PICs formation, and allows the formation of homogenous collagen/THA composite hydrogels compatible with cell survival.

Photoassisted Surface Modification with Zwitterionic Phosphorylcholine Polymers for the Fabrication of Ideal Biointerfaces

Surface modification using zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC) polymers is commonly performed to fabricate interfaces that reduce nonspecific fouling by biomolecules and cells. Accordingly, several clinically used devices, such as guide wires, stents, oxygenators, left ventricular assist devices, and microcatheters have been modified using MPC polymers. The specific types of surface modifications vary across substrates and applications. Recently, photoreactions have garnered attention for surface modification due to their stability and tunability. This review highlights various studies that employed photoreactions to modify surfaces using MPC polymers, especially photoinduced graft polymerization of MPC. In addition to antifouling materials, several micromanipulated, long-lasting hydrophilic, and super antiwear surfaces are summarized. Furthermore, several photoreactive MPC polymers that can be used to control interactions between biomolecules and materials are presented along with their potential to form selective recognition surfaces that target biomolecules for biosensors and diagnostic devices.

Liposomal oxygen-generating hydrogel for enhancing cell survival under hypoxia condition

The inadequate oxygen supply to engineered tissues has been a persistent challenge in tissue engineering and regenerative medicine. To overcome this limitation, we developed a scaffold combined with an oxygen-releasing liposomal system comprising catalase-loaded liposomes (CAT@Lip) and H2O2-loaded liposomes (H2O2@Lip). This oxygenation system has shown high cytocompatibility when they were applied to human stromal cells. Under hypoxic conditions, the cell viability enclosed in the oxygen-releasing liposomal alginate hydrogel (94.62 ± 3.46 %) was significantly higher than that of cells enclosed in hydrogel without liposomes (47.18 ± 9.68 %). There was no significant difference in cell viability and apoptosis rate compared to normoxia conditions after three days, indicating the effectiveness of the oxygen-releasing approach in hypoxic conditions. In conclusion, our study demonstrates that the use of liposomal oxygen-releasing scaffolds can overcome the oxygen diffusion challenge in tissue implant fabrication, providing a simple solution for cellular oxygenation that could be a crucial element in tissue engineering.

Local BMP2 hydrogel therapy for robust bone regeneration in a porcine model of Legg-Calvé-Perthes disease

Legg-Calvé-Perthes disease is juvenile idiopathic osteonecrosis of the femoral head (ONFH) that has no effective clinical treatment. Previously, local injection of bone morphogenetic protein-2 (BMP2) for ONFH treatment showed a heterogeneous bone repair and a high incidence of heterotopic ossification (HO) due to the BMP2 leakage. Here, we developed a BMP2-hydrogel treatment via a transphyseal bone wash and subsequential injection of BMP2-loaded hydrogel. In vitro studies showed that a hydrogel of gelatin-heparin-tyramine retained the BMP2 for four weeks. The injection of the hydrogel can efficiently prevent leakage. With the bone wash, the injected hydrogel had a broad distribution in the head. In vivo studies on pigs revealed that the BMP2-hydrogel treatment produced a homogeneous bone regeneration without HO. It preserved the subchondral contour and restored the subchondral endochondral ossification, although it increased growth plate fusions. In summary, the study demonstrated a promising BMP2-hydrogel treatment for ONFH treatment, especially for teenagers.

Hyaluronic Acid as Bioink and Hydrogel Scaffolds for Tissue Engineering Applications

Bioprinting is an additive manufacturing technique that focuses on developing living tissue constructs using bioinks. Bioink is crucial in determining the stability of printed patterns, which remains a major challenge in bioprinting. Thus, the choices of bioink composition, modifications, and cross-linking methods are being continuously researched to augment the clinical translation of bioprinted constructs. Hyaluronic acid (HA) is a naturally occurring polysaccharide with the repeating unit of N-acetyl-glucosamine and d-glucuronic acid disaccharides. It is present in the extracellular matrix (ECM) of tissues (skin, cartilage, nerve, muscle, etc.) with a wide range of molecular weights. Due to the nature of its chemical structure, HA could be easily subjected to chemical modifications and cross-linking that would enable better printability and stability. These interesting properties have made HA an ideal choice of bioinks for developing tissue constructs for regenerative medicine applications. In this Review, the physicochemical properties, reaction chemistry involved in various cross-linking strategies, and biomedical applications of HA have been elaborately discussed. Further, the features of HA bioinks, emerging strategies in HA bioink preparations, and their applications in 3D bioprinting have been highlighted. Finally, the current challenges and future perspectives in the clinical translation of HA-based bioinks are outlined.

Comparison of the peroxidase activities of iron oxide nanozyme with DNAzyme and horseradish peroxidase

Peroxidase-based assays are the most extensively used in bioanalytical sensors because of their simple colorimetric readout and high sensitivity owing to enzymatic signal amplification. To improve the stability, modification, and cost of protein-based enzymes, such as horseradish peroxidase (HRP), various enzyme mimics, such as DNAzymes and nanozymes, have emerged over the last few decades. In this study, we compared the peroxidase activities of HRP, a G-quadruplex (G4)-hemin DNAzyme, and Fe₃O₄ nanozymes in terms of activity and stability under different conditions. The reactions were much slower at pH 7 than at pH 4. At pH 4, the turnover rate of HRP (375 s^-1) was faster than that of G4 DNAzyme (0.14 s^-1) and Fe₃O₄ (6.1 × 10^-4 s^-1, calculated by surface Fe concentration). When normalized to mass concentrations, the trend was the same. Through observation of the reaction for a long time of 2 h, the changes in the color and UV-vis spectra were also different for these catalysts, indicating different reaction mechanisms among these catalysts. Moreover, different buffers and nanozyme sizes were found to influence the activity of the catalysts. Fe₃O₄ showed the highest stability compared to HRP and G4 DNAzyme after a catalytic reaction or incubation with H₂O₂ for a few hours. This study helps to understand the properties of catalysts and the development of novel catalysts with enzyme-mimicking activities for application in various fields.

Tissue engineering modalities in skeletal muscles: focus on angiogenesis and immunomodulation properties

Muscular diseases and injuries are challenging issues in human medicine, resulting in physical disability. The advent of tissue engineering approaches has paved the way for the restoration and regeneration of injured muscle tissues along with available conventional therapies. Despite recent advances in the fabrication, synthesis, and application of hydrogels in terms of muscle tissue, there is a long way to find appropriate hydrogel types in patients with congenital and/or acquired musculoskeletal injuries. Regarding specific muscular tissue microenvironments, the applied hydrogels should provide a suitable platform for the activation of endogenous reparative mechanisms and concurrently deliver transplanting cells and therapeutics into the injured sites. Here, we aimed to highlight recent advances in muscle tissue engineering with a focus on recent strategies related to the regulation of vascularization and immune system response at the site of injury.

Research Progress in Enzymatically Cross-Linked Hydrogels as Injectable Systems for Bioprinting and Tissue Engineering

Hydrogels have been developed for different biomedical applications such as in vitro culture platforms, drug delivery, bioprinting and tissue engineering. Enzymatic cross-linking has many advantages for its ability to form gels in situ while being injected into tissue, which facilitates minimally invasive surgery and adaptation to the shape of the defect. It is a highly biocompatible form of cross-linking, which permits the harmless encapsulation of cytokines and cells in contrast to chemically or photochemically induced cross-linking processes. The enzymatic cross-linking of synthetic and biogenic polymers also opens up their application as bioinks for engineering tissue and tumor models. This review first provides a general overview of the different cross-linking mechanisms, followed by a detailed survey of the enzymatic cross-linking mechanism applied to both natural and synthetic hydrogels. A detailed analysis of their specifications for bioprinting and tissue engineering applications is also included.

From crosslinking strategies to biomedical applications of hyaluronic acid-based hydrogels: A review

Hyaluronic acid (HA) is not only a natural anionic polysaccharide with excellent biocompatibility, biodegradability, and moisturizing effect, but also an essential factor that can affect angiogenesis, inflammation, cell behavior, which has a wide range of applications in the biomedical field. Among them, HA-based hydrogels formed by various physical or chemical crosslinking strategies are particularly striking. They not only retain the physiological function of HA, but also have the skeleton function of hydrogel, which further expands the application of HA. However, HA-based natural hydrogels generally have problems such as insufficient mechanical strength and susceptibility to degradation by hyaluronidase, which limits their application to a certain extent. To solve such problems, researchers have prepared a variety of HA-based multifunctional hydrogels with remarkable properties in recent years by adopting various structural modification methods or novel crosslinking strategies, as well as introducing functionally reactive molecules or moieties, which have extended the application scope. This manuscript systematically introduced common crosslinking strategies of HA-based hydrogels and highlighted the development of novel HA-based hydrogels in anticancer drug delivery, cartilage repair, three-dimensional cell culture, skin dressing and other fields. We hope to provide some references for the subsequent development of HA-based hydrogels in the biomedical field.

Research progress in decellularized extracellular matrix hydrogels for intervertebral disc degeneration

As one of the most common clinical disorders, low back pain (LBP) influences patient quality of life and causes substantial social and economic burdens. Many factors can result in LBP, the most common of which is intervertebral disc degeneration (IDD). The progression of IDD cannot be alleviated by conservative or surgical treatments, and gene therapy, growth factor therapy, and cell therapy have their own limitations. Recently, research on the use of hydrogel biomaterials for the treatment of IDD has garnered great interest, and satisfactory treatment results have been achieved. This article describes the classification of hydrogels, the methods of decellularized extracellular matrix (dECM) production and the various types of gel formation. The current research on dECM hydrogels for the treatment of IDD is described in detail in this article. First, an overview of the material sources, decellularization methods, and gel formation methods is given. The focus is on research performed over the last three years, which mainly consists of bovine and porcine NP tissues, while for decellularization methods, combinations of several approaches are primarily used. dECM hydrogels have significantly improved mechanical properties after the polymers are cross-linked. The main effects of these gels include induction of stem cell differentiation to intervertebral disc (IVD) cells, good mechanical properties to restore IVD height after polymer cross-linking, and slow release of exosomes. Finally, the challenges and problems still faced by dECM hydrogels for the treatment of IDD are summarised, and potential solutions are proposed. This paper is the first to summarise the research on dECM hydrogels for the treatment of IDD and aims to provide a theoretical reference for subsequent studies.

Injectable hydrogels of enzyme-catalyzed cross-linked tyramine-modified gelatin for drug delivery

Enzymatically catalyzed cross-linking is a hydrogel fabrication method that generally is considered to have lower cytotoxicity than traditional chemical cross-linking methods. In order to optimize the properties of injectable hydrogels and expand their applications, an enzyme-catalyzed cross-linked injectable hydrogel was designed. The tyramine-modified gelatin (G-T) was formed into a stable injectable hydrogel by the combination of horseradish peroxidase (HRP) and hydrogen peroxide (H2O2) catalysis. 1H NMR spectroscopy was used to demonstrate the successful modification of gelatin by tyramine. The surface morphology of the prepared hydrogels was characterized jointly by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Rheological tests demonstrated the tunable mechanical strength, formation kinetics, shear thinning and good self-recovery properties of the hydrogels. In addition, the hydrogels can be formed into various shapes by injection. The hydrogel network structure is complex and interlaced, as such it is suitable to encapsulate drugs for controlled release. The drug release from the prepared hydrogels followed the Peppas–Sahlin model and belonged to Fickian diffusion. This study constructed injectable hydrogels through the enzyme-catalyzed cross-linking of modified gelatin and applied the hydrogels for drug release, which is expected to expand the application in biomedical fields.

Enzymatic co-crosslinking of star-shaped poly(ethylene glycol) tyramine and hyaluronic acid tyramine conjugates provides elastic biocompatible and biodegradable hydrogels

A combination of the viscoelastic properties of hyaluronic acid (HA) and the elastic properties of star shaped 8-arm poly(ethylene glycol) (8-arm PEG) was used to design in-situ forming hydrogels. Hydrogels were prepared by the enzymatic crosslinking of a partially tyramine modified 8-arm PEG and a tyramine conjugated HA using horseradish peroxidase in the presence of hydrogen peroxide. Hydrogels of the homopolymer conjugates and mixtures thereof were rapidly formed within seconds under physiological conditions at low polymer and enzyme concentrations. Elastic hydrogels with high gel content (≥95%) and high storage moduli (up to 22.4 kPa) were obtained. An in vitro study in the presence of hyaluronidase (100 U/mL) revealed that with increasing PEG content the degradation time of the hybrid hydrogels increased up to several weeks, whereas hydrogels composed of only hyaluronic acid degraded within 2 weeks. Human mesenchymal stem cells (hMSCs) incorporated in the hybrid hydrogels remained viable as shown by a PrestoBlue and a live-dead assay, confirming the biocompatibility of the constructs. The production of an extracellular matrix by re-differentiation of encapsulated human chondrocytes was followed over a period of 28 days. Gene expression indicated that these highly elastic hydrogels induced an enhanced production of collagen type II. At low PEG-TA/HA-TA ratios a higher expression of SOX 9 and ACAN was observed. These results indicate that by modulating the ratio of PEG/HA, injectable hydrogels can be prepared applicable as scaffolds for tissue regeneration applications.

Polyaniline Entrapped Water-Dispersible 3MPA-ZnSe Quantum Dots and Their Application for the Development of an Enzymatic Electrochemical Nanobiosensor for the Detection of 17β-Estradiol, an Endocrine-Disrupting Compound

17β-estradiol is used as a growth and fertility stimulant in the agronomic sector to induce fertility and manipulate reproductive characteristics in animals. However, unintended or unregulated distribution and exposure to even significant low levels of 17β-estradiol estrogen have detrimental health implication that can lead to reproductive abnormalities and even cancer. This could have severe effect on the ecosystem imbalance, food safety, to such a degree that its health impact necessitates rapid methods to probe for its prevalence and occurrence in the environment. Herein a simple, robust, sensitive and once-off use electrochemical biosensor to detect 17β-estradiol is developed, using 3-mercaptopropionic acid capped zinc selenide quantum dots trapped within the polyaniline (PANI) framework structure. The biosensor's interaction with the substrate was based on the capability of the hemeprotein, horseradish peroxidase (HRP) enzyme (i.e., baroreceptor) to alternatively catalyze phenolic alcohols. The biosensor displayed a significantly low limit of detection limit (LOD) of value 0.2 × 10^-6 M towards 17β-estradiol. The Mechaelis-Menten constant (K_m) with the magnitude of 0.64 × 10^-6 M was obtained; this indicates an outstanding affinity of the biosensing films towards 17β-estradiol. Subsequently, the developed biosensor was able to accurately and efficiently measure successive concentrations of 17β-estradiol from 0.2 × 10 to 4 × 10^-6 M. The fabricated biosensor showed good selectivity towards 17β-estradiol compared to the other estrogenic endocrine-disrupting compounds such as estrone (E1), ethnylstradiol (EE2), and estriol (E3). The biosensor was capable of detecting 17β-estradiol in spiked tap water samples with good recoveries, thus affirming its potential to be applied for real electro-analysis of 17β-estradiol in treated wastewater.

Upregulation of biochemical and biophysical properties of cell-laden microfiber, silk-hyaluronic acid composite

Cell-laden filament-like hydrogels are advantageous for many applications including drug screening, tissue engineering, and regenerative medicine. However, most of the designed filament vehicles hold weak mechanical properties, which hinder their applications in specific tissue engineering. We present a binary hybrid silk and hyaluronic acid hydrogel microfiber generated through a microfluidic system to encapsulate cells with superior mechanical properties and biocompatibility. Cell-laden hydrogel microfibers were continuously produced through coaxial double orifice microfluidic device and horseradish peroxidase mediated crosslinking, which conjugated introduce phenolic moieties in the backbone of silk fibroin and HA derivatives (Silk-Ph and HA-Ph, respectively). The iterative hybrid Silk-Ph + HA-Ph fibers were fabricated in tunable size distribution between 195 and 680 μm through control of outer flow velocity. Tensile strength and maximum stain of prepared Silk-Ph + HA-Ph sample upregulated more than three times higher than the single HA-Ph sample, which demonstrated significant impacts of synthesized silk derivative in hydrogel fiber composition. The proteolytic degradation of microfibers manipulated by hyaluronidase and collagenase treatment. Encapsulation process and crosslinking did not insert any harmful effect on cell viability (> 90%) and the cells maintained their growth ability after encapsulation process. Cellular filament-like tissue fabricated from proliferation of cells in Silk-Ph + HA-Ph microfiber.

Hyaluronic acid/gelatin microcapsule functionalized with carbon nanotube through laccase-catalyzed crosslinking for fabrication of cardiac microtissue

Carbon nanotube (CNT) and gelatin (Gela) molecules are effective substrates in promoting engineered cardiac tissue functions. This study developed a microfluidic-based encapsulation process for biomimetic hydrogel microcapsule fabrication. The hydrogel microcapsule was produced through a coaxial double orifice microfluidic technique and a water-in-oil emulsion system in two sequential processes. The phenol (Ph) substituted Gela (Gela-Ph) and CNT (CNT-Ph), respectively as cell-adhesive and electrically conductive substrates were incorporated in hyaluronic acid (HA)-based hydrogel through laccase-mediated crosslinking. The Cardiomyocyte-enclosing microcapsule fabricated and cellular survival, function, and possible difference in the biological activity of encapsulated cells within micro vehicles were investigated. The coaxial microfluidic method and Lac-mediated crosslinking reaction resulted in spherical vehicle production in 183 μm diameter at 500 capsules/min speed. The encapsulation process did not affect cellular viability and harvested cells from microcapsule proliferated well likewise subcultured cells in tissue culture plate. The biophysical properties of the designed hydrogel, including mechanical strength, swelling, biodegradability and electroconductivity upregulated significantly for hydrogels decorated covalently with Gela-Ph and CNT-Ph. The tendency of the microcapsule for the spheroid formation of cardiomyocytes inside the proposed microcapsule occurred 3 days after encapsulation. Interestingly, immobilized Gela-Ph and CNT-Ph promote cellular growth and specific cardiac markers. Overall, the microfluidic-based encapsulation technology and synthesized biomimetic substrates with electroconductive properties demonstrate desirable cellular adhesion, proliferation, and cardiac functions for engineering cardiac tissue.

Current Trends in Biomedical Hydrogels: From Traditional Crosslinking to Plasma-Assisted Synthesis

The use of materials to restore or replace the functions of damaged body parts has been proven historically. Any material can be considered as a biomaterial as long as it performs its biological function and does not cause adverse effects to the host. With the increasing demands for biofunctionality, biomaterials nowadays may not only encompass inertness but also specialized utility towards the target biological application. A hydrogel is a biomaterial with a 3D network made of hydrophilic polymers. It is regarded as one of the earliest biomaterials developed for human use. The preparation of hydrogel is often attributed to the polymerization of monomers or crosslinking of hydrophilic polymers to achieve the desired ability to hold large amounts of aqueous solvents and biological fluids. The generation of hydrogels, however, is shifting towards developing hydrogels through the aid of enabling technologies. This review provides the evolution of hydrogels and the different approaches considered for hydrogel preparation. Further, this review presents the plasma process as an enabling technology for tailoring hydrogel properties. The mechanism of plasma-assisted treatment during hydrogel synthesis and the current use of the plasma-treated hydrogels are also discussed.

Phenoxyl mediators improve enzymatic degradation of organic pollutants: Effect and mechanism

A mediation strategy can effectively overcome the low reaction activity of enzymes with nonspecific substrates. In this study, we demonstrated how phenol compounds can mitigate the substrate limitation of HRP in catalytic degradation of various organic pollutants. In a classical HRP/H₂O₂ system, phenol and natural phenolic compounds (4-HBA & pHBA), exhibited up to over 100-fold enhancement in eliminating organic dyes and persistent antibiotics while the loading is only 2-5 wt%. A combination of molecular modelling, docking and frontier orbital energy analysis was employed to elucidate the catalytic performance and mechanism. We revealed that (1) generating phenoxyl radicals required the proximity of mediators to the HRP active centre, and (2) the subsequent efficient radical transfer to pollutants was determined by the large energy gap between the SOMO energy of phenoxyl radicals and the HOMO energy of phenols. When considering phenols as pollutants, we showed a synergistic effect on catalytic degradation of phenols, dyes, and tetracycline with a removal efficiency of 71-92 %. Overall, this work not only demonstrates that phenoxyl mediators can overcome the lower efficiency and substrate-specificity limitations of the HRP/H₂O₂ system but also revealed their structure-mediation relationship, implying great potential in the biodegradation of diverse pollutants and their mixtures.

Bioinspired Hydrogels as Platforms for Life-Science Applications: Challenges and Opportunities

Hydrogels, as interconnected networks (polymer mesh; physically, chemically, or dynamic crosslinked networks) incorporating a high amount of water, present structural characteristics similar to soft natural tissue. They enable the diffusion of different molecules (ions, drugs, and grow factors) and have the ability to take over the action of external factors. Their nature provides a wide variety of raw materials and inspiration for functional soft matter obtained by complex mechanisms and hierarchical self-assembly. Over the last decade, many studies focused on developing innovative and high-performance materials, with new or improved functions, by mimicking biological structures at different length scales. Hydrogels with natural or synthetic origin can be engineered as bulk materials, micro- or nanoparticles, patches, membranes, supramolecular pathways, bio-inks, etc. The specific features of hydrogels make them suitable for a wide variety of applications, including tissue engineering scaffolds (repair/regeneration), wound healing, drug delivery carriers, bio-inks, soft robotics, sensors, actuators, catalysis, food safety, and hygiene products. This review is focused on recent advances in the field of bioinspired hydrogels that can serve as platforms for life-science applications. A brief outlook on the actual trends and future directions is also presented.

Recent advances in biomedical applications of 2D nanomaterials with peroxidase-like properties

Significant progress has been made in developing two-dimensional (2D) nanomaterials owing to their ultra-thin structure, high specific surface area, and many other advantages. Recently, 2D nanomaterials with enzyme-like properties, especially peroxidase (POD)-like activity, are highly desirable for many biomedical applications. In this review, we first classify the types of 2D POD-like nanomaterials and then summarize various strategies for endowing 2D nanomaterials with POD-like properties. Representative examples of biomedical applications are reviewed, emphasizing in antibacterial, biosensing, and cancer therapy. Last, the future challenges and prospects of 2D POD-like nanomaterials are discussed. This review is expected to provide an in-depth understanding of 2D POD-like materials for biomedical applications.

Biomimetic hydrogel scaffolds via enzymatic reaction for cartilage tissue engineering

Objective

We aimed to evaluate cytocompatibility of hyaluronic acid (HA) and gelatin (Gela) conjugation with phenolic groups (Phs) via enzyme-mediated crosslinking. Phenolic moieties were substituted on the backbone of HA (HA-Ph) and Gela (Gela-Ph) and subsequently were subjected for horseradish peroxidase crosslinking in the presence of H₂O₂ as an electron donor to create a stable hybrid microenvironment for cellular behavior and cartilage tissue engineering.

Results

Successful synthesis of biopolymers confirmed by NRM and UV–Vis spectrophotometry. The physical characteristic of hydrogels including mechanical properties and water contact angle of hydrogels enhanced with addition of Gela-Ph in HA-based hydrogel. The Gela-Ph showed longest gelation time and highest degradation rate. The cellular studies showed cells did not attach to HA-Ph hydrogel. While, proper cell attachment and proliferation observed on blend hydrogel surface compared with the neat hydrogels which interpret by the existence of cell-adhesive motifs of utilized Gela-Ph in this hydrogel. The encapsulated cells in HA-Ph hydrogel were spheroid and just maintained their viability. Hydrogels containing Gela-Ph, the cells were spindle shape with high degrees of cytoplasmic extension. Overall, the results suggest that hybrid biomimetic hydrogel can provide a superior biological microenvironment for chondrocytes in 3D cartilage tissue engineering.

Polymeric Hydrogels for Controlled Drug Delivery to Treat Arthritis

Rheumatoid arthritis (RA) and osteoarthritis (OA) are disabling musculoskeletal disorders that affect joints and cartilage and may lead to bone degeneration. Conventional delivery of anti-arthritic agents is limited due to short intra-articular half-life and toxicities. Innovations in polymer chemistry have led to advancements in hydrogel technology, offering a versatile drug delivery platform exhibiting tissue-like properties with tunable drug loading and high residence time properties This review discusses the advantages and drawbacks of polymeric materials along with their modifications as well as their applications for fabricating hydrogels loaded with therapeutic agents (small molecule drugs, immunotherapeutic agents, and cells). Emphasis is given to the biological potentialities of hydrogel hybrid systems/micro-and nanotechnology-integrated hydrogels as promising tools. Applications for facile tuning of therapeutic drug loading, maintaining long-term release, and consequently improving therapeutic outcome and patient compliance in arthritis are detailed. This review also suggests the advantages, challenges, and future perspectives of hydrogels loaded with anti-arthritic agents with high therapeutic potential that may alter the landscape of currently available arthritis treatment modalities.

Preparation of pH-Responsive Poly(γ-glutamic acid) Hydrogels by Enzymatic Cross-Linking

pH-responsive hydrogels are important for oral drug release applications, and they are increasingly demanded to reduce the adverse side effects of drug release and improve drug absorption. In this study, a new type of pH-responsive hydrogel comprised of poly(γ-glutamic acid) modified with tyramine (PGA-Tyr) was developed through enzymatic cross-linking in the presence of horseradish peroxidase (HRP) and hydrogen peroxide (H₂O₂). The gelation rate, stiffness, swelling behavior, and pore size of the resulting hydrogels were tuned by changing the concentrations of HRP and H₂O₂ or the degree of substitution (DS) of PGA-Tyr. The pH responsiveness of the hydrogels was evaluated by the swelling ratio in solutions with various pH values, and their pH responsiveness exhibited a good reversibility in pH 2.0 and 7.0 solutions. The degradation rate of the hydrogels in simulated intestinal fluid (SIF) was faster than that in simulated gastric fluid (SGF). Moreover, indomethacin (IM), a hydrophobic drug model, was encapsulated in the hydrogels by rapid in situ gelation, and the pH-dependent drug release of IM-loaded hydrogels was achieved in SGF and SIF. Importantly, when IM was entrapped in pluronic F-127 to form drug micelles, the burst release of the IM-micelle-loaded hydrogels with a high DS of PGA-Tyr was remarkably decreased in SGF, and sustained drug release was presented in SIF. Thus, pH-responsive PGA-based hydrogels have tremendous promise for biomedical applications, especially oral drug delivery.

Advances in Modified Hyaluronic Acid-Based Hydrogels for Skin Wound Healing

Hyaluronic acid (HA) is a natural linear anionic polysaccharide with many unique characteristics such as excellent biocompatibility and biodegradability, native biofunctionality, hydrophilicity, and non-immunoreactivity. HA plays crucial roles in numerous...

Construction of tissue-customized hydrogels from cross-linkable materials for effective tissue regeneration

Hydrogels are prevalent scaffolds for tissue regeneration because of their hierarchical architectures along with outstanding biocompatibility and unique rheological and mechanical properties. For decades, researchers have found that many materials (natural, synthetic, or hybrid) can form hydrogels using different cross-linking strategies. Traditional strategies for fabricating hydrogels include physical, chemical, and enzymatical cross-linking methods. However, due to the diverse characteristics of different tissues/organs to be regenerated, tissue-customized hydrogels need to be developed through precisely controlled processes, making the manufacture of hydrogels reliant on novel cross-linking strategies. Thus, hybrid cross-linkable materials are proposed to tackle this challenge through hybrid cross-linking strategies. Here, different cross-linkable materials and their associated cross-linking strategies are summarized. From the perspective of the major characteristics of the target tissues/organs, we critically analyze how different cross-linking strategies are tailored to fit the regeneration of such tissues and organs. To further advance this field, more appropriate cross-linkable materials and cross-linking strategies should be investigated. In addition, some innovative technologies, such as 3D bioprinting, the internet of medical things (IoMT), and artificial intelligence (AI), are also proposed to improve the development of hydrogels for more efficient tissue regeneration.

Regulated Polyelectrolyte Nanogels for Enzyme Encapsulation and Activation

Polyelectrolyte (PE) nanogels consisting of cross-linked PE networks integrate the advanced features of both nanogels and PEs. The soft environment and abundant intrinsic charges are of special interest for enzyme immobilization. However, the crucial factors that regulate enzyme encapsulation and activation remain obscure to date. Herein, we synthesized cationic poly (dimethyl aminoethyl methacrylate), PDMAEMA, nanogels with well-defined size and cross-link degrees and fully investigated the effects of different control factors on lipase immobilization. We demonstrate that the cationic PDMAEMA nanogels indeed enable efficient and safe loading of anionic lipase without disturbing their structures. Strong charge interaction achieved by tuning pH and larger particle size are favorable for lipase loading, while the enhanced enzymatic activity demands nanogels with smaller size and a moderate cross-link degree. As such, PDMAEMA nanogels with a hydrodynamic radius of 35 nm and 30% cross-linker fraction display the optimal catalytic efficiency, which is fourfold of that of free lipase. Moreover, the immobilization endows enhanced enzymatic activity in a broad scope of pH, ionic strength, and temperature, demonstrating effective protection and activation of lipase by the designed nanogels. Our study validates the crucial controls of the size and structure of PE nanogels on enzyme encapsulation and activation, and the revealed findings shall be helpful for designing functional PE nanogels and boosting their applications for enzyme immobilization.

Thermally tunable hydrogel crosslinking mediated by temperature sensitive liposome

Hydrogel crosslinking by external stimuli is a versatile strategy to control and modulate hydrogel properties. Besides photonic energy, thermal energy is one of the most accessible external stimuli and widely applicable for many biomedical applications. However, conventional thermal crosslinking systems require a relatively high temperature (over 100 °C) to initiate covalent bond formation. To our knowledge, there has not been a thermally tunable hydrogel crosslinking system suitable for biological applications. This work demonstrates a unique approach to utilize temperature sensitive liposomes to control and modulate hydrogel crosslinking over mild temperature range (below 50 °C). Temperature sensitive liposomes were used to control the release of chemical crosslinkers by moderate temperature changes. The thermally controlled crosslinker release resulted in tunable mechanical and transport properties of the hydrogel. No significant inflammable response observed in the histology results ensured the biocompatibility of the liposome-mediated crosslinkable hydrogel. This work opens new opportunities to implement thermal energy system for control and modulate hydrogel properties.

Fabrication of alginate-based hydrogel cross-linked via horseradish peroxidase for articular cartilage engineering

OBJECTIVE

We aimed to detect the effect of a couple of parameters including Alg, H2O2, and HRP concentrations on the gelation time of Alg-based hydrogels using an enzymatic cross-linked procedure.

RESULTS

NMR, UV-Vis, and ATR-FTIR analyses confirmed the conjugation of Ph to the Alg backbone. Data showed gelation time was delayed with the increase and reduction of H2O2 and HRP, respectively. We noted that hydrogel consisted of 1.2% (w/v) Alg, 5 U HRP, and 100 mM H2O2 yielded an appropriate gelation time with appropriate mechanical properties. The addition of 0.5% (v/v) Col developed hydrogel increased the gelation time. The data showed that Alg, HRP, and H2O2 with the ratio of 1:0.54:0.54 had proper physicochemical features for cartilage engineering.

Polymeric biomaterials maintained the esthetic efficacy and reduced the cytotoxicity of in-office dental bleaching

Evaluate the kinetics of hydrogen peroxide (H₂ O₂ ) degradation, esthetic efficacy and cytotoxicity of a bleaching gel with 35%H₂ O₂ applied on enamel previously covered or not with polymeric nanofibrillar scaffold (SNan), polymeric primer catalyst (PPol), and both. Standardized enamel/dentin discs (n = 128) obtained from bovine teeth were adapted to pulp chambers. After covering enamel with the polymeric products, the bleaching gel was applied for 45 min, establishing the following groups: G1: no treatment (negative control); G2: 35%H₂ O₂ (positive control); G3: SNan; G4: PPol; G5: SNan + PPol; G6: SNan + 35%H₂ O₂ ; G7: PPol + 35%H₂ O₂ ; G8: SNan + PPol + 35%H₂ O₂ . The kinetics of H₂ O₂ degradation (n = 8), bleaching efficacy (ΔE/ΔWI; n = 8), trans-amelodentinal cytotoxicity (n = 8), and cell morphology (n = 4) were assessed (ANOVA/Tukey test; p < 0.05). Greater H₂ O₂ degradation occurred in G7 and G8. Bleaching efficacy (ΔE) was higher in G6, G7, and G8 in comparison with G2 (p < 0.05). However, no difference was observed for ΔWI (p > 0.05). G8 presented the lower level of trans-amelodentinal diffusion of H₂ O₂ , oxidative stress, and toxicity to the MDPC-23 cells (p < 0.05). Polymeric biomaterials increased the kinetics of H₂ O₂ decomposition, as well as maintained the esthetic efficacy and minimized the cytotoxicity caused by a bleaching gel with 35%H₂ O₂ . CLINICAL SIGNIFICANCE: Application of a bleaching gel with 35%H₂ O₂ on enamel previously covered by polymeric biomaterials maintains the esthetic efficacy and reduces the cytotoxicity caused by a single session of in-office dental bleaching.