Open-framework hybrid zinc/tin selenide as an ultrafast adsorbent for Cs+, Ba2+, Co2+, and Ni2

Efficient adsorption of radioactive ¹³⁷Cs⁺ and ⁶⁰Co²⁺ and their decay products ¹³⁷Ba²⁺ and ⁶⁰Ni²⁺ bears significance for hazard elimination in case of nuclear emergency, which relies on the adsorption rate enhancement that takes advantages of compositional and structural optimization. Herein, we report a zinc-doped selenidostannate constructed from T2-supertetrahedral clusters, namely K_3.4(CH₃NH₃)_0.45(NH₄)_0.15Zn₂Sn₃Se₁₀·3.4 H₂O (ZnSnSe-1K). The soft Se and micro-porosity synergistically endow this material with a binding affinity to Cs⁺, Ba²⁺, Co²⁺, and Ni²⁺ ions and ultrafast kinetics with R > 97.6% in 2-60 min. In particular, ZnSnSe-1K can remove 99.34% of Cs⁺ in 2 min ⁽K_d^Cs > 1.5 × 10⁵ mL g^-1), contributing to a record rate constant k₂ of 9.240 g mg^-1 min^-1 that surpasses all metal chalcogenide adsorbents. ZnSnSe-1K exhibits good acid/base tolerance (pH = 0-12), and the adsorption capacities at neutral are 253.61 ± 9.15, 108.94 ± 25.32, 45.76 ± 14.19 and 38.49 ± 2.99 mg g^-1 for Cs⁺, Ba²⁺, Co²⁺, and Ni²⁺, respectively. The adsorption performances resist well co-existing cations and anions, and the removal rates can keep above or close to 90% even in sea water. ZnSnSe-1K is employed in continuous column and membrane filtration, both of which shows excellent elimination efficiency (R > 99%) for mixed Cs⁺, Ba²⁺, Co²⁺, and Ni²⁺. Especially, the membrane with an ultrathin (70 µm) ZnSnSe-1K layer can remove 97-100% Cs⁺ in suction filtration with a short contact time of 0.33 s. Combined with the simple synthesis, facile elution and great irradiation resistance, ZnSnSe-1K emerges as a selenide adsorbent candidate for use in environmental remediation especially that involving nuclear waste disposal.

Crystalline chalcogenidometalate-based compounds from uncommon reaction media

Chalcogenides are one of the most versatile inorganic materials families, further subdivided into a large variety of specific groups of compounds, ranging from neat binary or multinary solids and nanoparticles of the same formal compositions, both in crystalline or non-crystalline form, to complicated open-framework structures and cluster compounds, also including organ(ometall)ic derivates of the latter. The large variety regarding both the compositions and the structures is associated with an enormous variety of properties, ranging from simple or high-tech pigments through a multitude of opto-electronic devices and electrolytes to materials for ion separation or high-sophisticated catalysts. Naturally, this also goes hand in hand with a corrosponding breadth of synthesis strategies. Traditionally, chalcogenides have been accessed via high-temperature methods, which continuously have been replaced by lower-temperature approaches for economical and ecological reasons. Moreover, more recent methods also showed that new types of chalcogenide materials can be obtained under such milder conditions that are not accessible via traditional routes. To shed light onto one of the numerous families of chalcogenides, this feature article summarizes current achievements in the generation of multinary chalcogenidometallate-based clusters and networks via non-classical routes, using ionic liquids, surfactants, or hydrazine as reaction media at moderately elevated termperature.

Tailoring Hybrid Aluminoborate Frameworks by Incorporating Multicomponent Cadmium-Amine Complexes with Various Conformations

Inorganic-organic hybrid aluminoborates represent a subclass of porous materials, which rely on effective construction method and structure-directing agents. Herein, we prepared a series of hybrid aluminoborates through covalent decoration of unsaturated Cd²⁺ complexes, whose formation take advantage of chelating amine and long-chain diamine as mixed ligands. These isolated compounds, that is, [Cd(en)(1,4-dab)_0.5][AlB₅O₁₀] (1a; its analogue with discrete complex [Cd(en)(dien)H₂O][AlB₅O₁₀] is denoted as 1b), [Cd(1,2-dap)_1.5(1,4-dabH)_0.5]{Al[B₅O₈(OH)₂](B₅O₁₀)_0.5} (2), and [Cd(en)(1,3-dap)][AlB₅O₁₀] (3) feature open frameworks (1a, 1b, and 3) or a sandwich-like porous layer (2) that are constructed by AlO₄ tetrahedra and [B₅O₁₀]^5-/[B₅O₈(OH)₂]^3- clusters. However, they exhibit different structural features in interconnection, channel environment, and topology as a result of diversified interactions between unsaturated complexes and aluminoborate frameworks, that is, through forming two Cd-O bonds with (i) a pair of neighboring BO₃ and AlO₄, (ii) the same AlO₄, or (iii) the same BO₃. The variation in connection mode exerts essential influence on binding effects and steric hindrance that are reflected by changes in interatomic distance, bond angle, window configuration, and interlinkage of units. In addition, the incorporation of unsaturated Cd²⁺ complexes endows these aluminoborate materials with photoluminescence function. Compound 3 with a noncentrosymmetric structure exhibits second harmonic generation (SHG) response approximately 0.7 times that of KDP. The preparation strategy for hybrid aluminoborates proposed here combines well molecular design with templating assembly, whose synergistic effect would be crucial for drawing a rational pathway for inorganic synthesis, especially with focus on structural and functional innovation.

Structural Investigation on the Efficient Capture of Cs+ and Sr2+ by a Microporous Cd-Sn-Se Ion Exchanger Constructed from Mono-Lacunary Supertetrahedral Clusters

Visualization of the ion exchange mechanism for 137Cs and 90Sr decontamination bears significance for safe radioactive liquid waste reprocessing and emergency response enhancement to nuclear accident. Here, the remediation of...

Two 2D Co(II)/Mn(II) coordination polymers based on the quinoline-2,3-dicarboxylate ligand: synthesis, crystal structure, and fluorescence properties

A pair of two-dimensional (2D) isostructural coordination polymers (CPs), {[Co(2,3-qldc)(H2O)]} n (1) and {[Mn(2,3-qldc)(H2O)]} n (2), where 2,3-H2qldc = quinoline-2,3-dicarboxylic acid, were hydrothermally synthesized and characterized through IR spectroscopy, elemental and thermal analysis, power X-ray diffraction, and single-crystal X-ray diffraction. The results have revealed that the fully deprotonated 2,3-H2qldc ligand connects the Co(II)/Mn(II) atoms with a μ 3-bridge to form a square-wave 2D network, which is further extended into 3D stacks through O–H···O, C–H···O hydrogen bonds and π···π stacking interactions. Topologically, 1 or 2 can be simplified as a 4-connected sql type with a Schläfli symbol {44·62} and a Shubnikov tetragonal plane net, or as a 3-connected fes type with a Schläfli symbol {4·82} and a Shubnikov plane net. The thermal stability and the solid state fluorescence properties of 1 and 2 were investigated.

Eutectics: formation, properties, and applications

Various eutectic systems have been proposed and studied over the past few decades. Most of the studies have focused on three typical types of eutectics: eutectic metals, eutectic salts, and deep eutectic solvents. On the one hand, they are all eutectic systems, and their eutectic principle is the same. On the other hand, they are representative of metals, inorganic salts, and organic substances, respectively. They have applications in almost all fields related to chemistry. Their different but overlapping applications stem from their very different properties. In addition, the proposal of new eutectic systems has greatly boosted the development of cross-field research involving chemistry, materials, engineering, and energy. The goal of this review is to provide a comprehensive overview of these typical eutectics and describe task-specific strategies to address growing demands.

Shape- and Color-Switchable Polyurethane Thermochromic Actuators Based on Metal-Containing Ionic Liquids

Many creatures have excellent control over their form, color, and morphology, allowing them to respond to the interaction of environmental stimuli better. Here, the bioinspired synergistic shape-color-switchable actuators based on thermally induced shape-memory triethanolamine cross-linked polyurethane (TEAPU) and thermochromic ionic liquids (ILs) were prepared. The thermochromic ILs with various metalized anions, including bis(1-butyl-3-methylimidazolium) tetrachloro nickelate ([Bmim]₂[NiCl₄]) and bis(1-butyl-3-methylimidazolium) tetrachloride cobalt ([Bmim]₂[CoCl₄]), are investigated. The actuators exhibit thermochromic response, as evidenced by a shift in the color of the composites, which is due to the formation of the tetrahedral complex MCl₄^2- (M = Ni and Co) after dehydration. The shape-color-switchable thermochromic actuators have strong molecular interaction between TEAPU and ILs and can mimic natural flowers and change the color and shape quickly in a narrow temperature range (30-70 °C). In addition, these thermochromic actuators can lift more than 50 times their weight and withstand strains of more than 1100%. The results represent the potential application in artificial muscle actuators and intelligent camouflages.

Two 6/10-connected Cu12S6 cluster-based organic frameworks: crystal structure and proton conduction

Nowadays, although the exploration of proton conductive materials has ranged from traditional sulfonated polymers to novel crystalline solid materials such as MOFs, COFs, and HOFs, research on crystalline cluster-based organic framework materials is very limited. Here, a pair of homologues Cu(i)-based organic framework containing a Cu12S6 cluster, [Cu12(MES)6(H2O)3]n (1) and {[Cu12(MPS)6(H2O)4]·6H2O}n (2) (H2MES = 2-mercaptoethanesulfonate acid and H2MPS = 2-mercaptoethanesulfonate acid), were hydrothermally synthesized under the same conditions and fully investigated for their proton conduction. Their structures were characterized by means of single-crystal X-ray diffraction, elemental analysis, thermogravimetric analyses, and PXRD measurements. The two MOFs show significant structural differences in the topological fashions. MOF 1 has a three-dimensional network and can be simplified into two topology types: a 10-connected gpu structure with a Schläfli symbol (312·426·57) and a 3,12-connected new topology with a point symbol {3·42}2{310·418·519·614·74·9}. MOF 2 also has a three-dimensional framework and topology as a 6-connected pcu primitive cubic network with a Schläfli symbol {412·63}. The two MOFs show different proton conduction parameters, but both indicate temperature-dependent proton conductive features. Intriguingly, the two MOFs exhibit high water stability and their proton conductivities are 3.63 × 10-5 and 2.75 × 10-5 S cm-1 under 333 K and 98% RH, respectively. The suggested mechanism for the synthesis for 1 and 2, and their proton conductivity performance comparison has been discussed in detail. In addition, Hirshfeld surface and fingerprint analysis on the two MOFs were computed to compare contacts between the molecules, which is essential for analyzing the relationships between their hydrogen bonds and proton conductivity properties.

Mixed Solvothermal Synthesis of Tn Cluster-Based Indium and Gallium Sulfides Using Versatile Ammonia or Amine Structure-Directing Agents

Metal chalcogenide supertetrahedral Tn clusters are of current interest for their unique compositions and structures, which rely highly on the structure-directing agents. Herein, we report four novel Tn cluster-based indium and gallium sulfides, namely, [NH(CH₃)₃]₄In₄S₁₀H₄ (1), (NH₃)₄Ga₄S₆ (2), [NH₃CH₂CH₃]₅(NH₂CH₂CH₃)₂Ga₁₁S₁₉ (3), and [NH₃CH₂CH₂OH]₆Ga₁₀S₁₈·2NH₂CH₂CH₂OH (4). All four compounds were solvothermally synthesized in mixed amine-ethanol solutions or deep eutectic solvent (DES), where ammonia/amine molecules play significant structure-directing roles in the speciation and crystal growth. (1) Being protonated, the trimethylamine and ethanolamine molecules surround the T2-[In₄S₁₀H₄]^4- clusters (for 1) and [Ga₁₀S₁₈]_n^6n- open framework (for 4), respectively, compensating for the negative charge of the inorganic moieties. (2) With the lone pair of electrons, the ammonia molecules in 2 coordinate directly to corner Ga³⁺ ions of the {Ga₄S₆} cage to give a neutral T2-(NH₃)₄Ga₄S₆ cluster. (3) For compound 3, part of the ethylamine molecules act as terminating ligands for the T1 and T3 units in the [Ga₁₁S₁₉(NH₂CH₂CH₃)₂]_n^5n- layer, while the rest act as interlamellar countercations upon protonation. Theoretical studies reveal the contributions of N, C, and H to the density of states (DOS) for 2 and 3 because of their hybrid structures that combine the ammonia/amine ligands with sulfide moieties together.

Thermochromism and piezochromism of an atomically precise high-nuclearity silver sulfide nanocluster

A novel high-nuclearity silver sulfide nanocluster [Ag₅₀S₇(SC₆H₄F)₃₆(dppp)₆]·4DMI, (hereafter abbreviated as 1⋅4DMI) was synthesised. Solvent-free crystals of 1 displayed a completely reversible narrowing and broadening of the optical band gap that was accompanied by visual thermochromism and piezochromism changeovers, when stimulated by varying temperatures between 113 and 413 K or by changing the pressure from 1 atm to 7.5 GPa.

Efficient Cs+-Sr2+ Separation over a Microporous Silver Selenidostannate Synthesized in Deep Eutectic Solvent

Efficient Cs⁺-Sr²⁺ separation, highly desirable for radionuclide recovery in medical and industrial applications, was achieved by the ion exchange technique over a novel microporous silver selenidostannate, [NH₃CH₃]_0.5[NH₂(CH₃)₂]_0.25Ag_1.25SnSe₃ (AgSnSe-1). This material was synthesized in deep eutectic solvent (DES), where the alkylammonium cations play significant structure-directing roles in the construction of micropores that allow for selective ion exchange toward Cs⁺ against Sr²⁺. The much greater K_d^Cs (1.06 × 10⁴ mL g^-1) over K_d^Sr (87.7 mL g^-1) contributes to an outstanding separation factor SF_Cs/Sr of ∼121.4 that is top-ranked among inorganic materials. An ion exchange column filled with AgSnSe-1 exhibits a remarkable separation effect for 10 000 bed volumes of continuous flow, with removal rates of ∼99.9% and ∼0 ± 5.5% for Cs⁺ and Sr²⁺, respectively. AgSnSe-1 exhibits excellent β and γ radiation resistances and a chemical stability over a broad pH range of 1-12. The Se leaching level below the safe guideline value for drinking water highlights the environmental-friendly nature of AgSnSe-1. The high Cs⁺ exchange performance is almost unaffected by Na⁺, Mg²⁺, and Ca²⁺ cations. The Cs⁺-laden product AgSnSe-1Cs can be facilely eluted for recycling use, highlighting the great potential of open framework metal selenides in nuclear waste treatment and renewable energy utilization.

A supersalt-type copper(i)-thiolate cluster with applications for mechano/thermochromism and the oxygen evolution reaction

A new copper(i)-thiolate (Cu-S) cluster with a CsCl unit (1, [Cu₁₂(μ₄-SCH₃)₆(NH₃)₁₂][Cu₁₂(μ₄-SCH₃)₆Cl₁₂]) exhibited interesting mechanochromic and thermochromic luminescence properties. Additionally, heteroatom-rich 1 could also be used as an electrocatalyst for the oxygen evolution reaction in alkaline media. The supersalt-type Cu-S cluster for the first time realized mechano/thermochromic and electrocatalytic applications.

A square-pyramidal coordinated copper(ii) hydrazine dimeric complex showing reversible phase transition, dielectric anomaly and thermochromism

A square-pyramidal coordinated copper(ii) hydrazine dimeric complex was prepared by reaction of CuCl₂ with trimethyl hydrazine showing reversible phase transition, dielectric anomaly and thermochromism.

Stepwise Conversion from GeO2 to [MGe4S10]n3n- (M = Cu, Ag) Polymer via Isolatable [Ge2S6]4- and [Ge4S10]4- Anions by Virtue of Templating Technique

Rational synthesis of inorganic matter remains a great challenge encountered with modern synthetic chemistry. Here we reported the stepwise solvothermal conversion from GeO₂ to [MGe₄S₁₀]_n^3n- (M = Cu, Ag) polymer via isolatable [Ge₂S₆]^4- and [Ge₄S₁₀]^4- anions by virtue of templating technique. The facile sulfuration of GeO₂ resulted in the methylammonium-templated dimeric thiogermanate [CH₃NH₃]₄Ge₂S₆ (1). This was used subsequently as a precursor for the formation of adamantane-like [Ge₄S₁₀]^4- cluster, which was isolated as a mixed methylammonium/ethylammonium salt [CH₃CH₂NH₃]₃[CH₃NH₃]Ge₄S₁₀ (2). Compound 2 was then successfully used as a precursor to react with Cu⁺ and Ag⁺ cations in the presence of tetraethylammonium, resulting in alternating copolymeric products [(CH₃CH₂)₄N]₃MGe₄S₁₀ (M = Cu (3), Ag (4)), whose anionic moieties feature a novel zigzag chainlike structure constructed by [Ge₄S₁₀]^4- clusters via two-coordinate Cu⁺/Ag⁺ linkers. Mixed amine/ethanol or deep eutectic solvents were applied as media for the syntheses of 1-4, and all the products were characterized in the solid state and solution. Crystal structural analysis of the title compounds revealed significant templating roles of the alkylammonium cations as both space-filling agents and hydrogen-bonding donors, suggesting the structure-directing mechanism for the species formation and crystal growth. The design and optimization of multistep structural conversion upon templating effects would be beneficial for drawing rational, predictable pathways for inorganic synthesis.

Deep eutectic solvothermal synthesis of an open framework copper selenidogermanate with pH-resistant Cs+ ion exchange properties

Reported here is the deep eutectic solvothermal synthesis of an open framework copper selenidogermanate [NH₃CH₃]_0.75Cu_1.25GeSe₃ (CuGeSe-1), which shows a pH-resistant Cs⁺ ion exchange performance (q_m = 225.3 mg g⁻¹).

A series of new hybrid selenidostannates with metal complexes prepared in alkylol amines

A series of new hybrid selenidostannates were synthesized in alkylol amines, whose zinc selenidostannate with a photocurrent response represents the first example of the hybrid chalcogenidostannate incorporating rare tetrahedral metal complexes.