Hydrogen-Bonding-Regulated Morphology Control and the Impact on the Antibacterial Activity of Cationic π-Amphiphiles

This manuscript describes the synthesis, self-assembly, and antibacterial properties of naphthalene-diimide (NDI)-derived cationic π-amphiphiles. Three such asymmetric NDI derivatives with a nonionic hydrophilic wedge and a guanidine group in the two opposite sides of the NDI chromophore were considered. They differ by a single functional group (hydrazide, amide, and ester for NDI-1, NDI-2, and NDI-3, respectively), located in the linker between the NDI and the hydrophilic wedge. For NDI-1, the H-bonding among the hydrazides regulated unilateral stacking and a preferential direction of curvature of the resulting supramolecular polymer, producing an unsymmetric polymersome with the guanidinium groups displayed at the outer surface. NDI-3, lacking any H-bonding group, exhibits π-stacking without any preferential orientation and generates spherical particles with a relatively poor display of the guanidium groups. In sharp contrast to NDI-1, NDI-2 exhibits an entangled one-dimensional (1D) fibrillar morphology, indicating the prominent role of the H-bonding motif of the amide group and flexibility of the linker. The antibacterial activity of these assemblies was probed against Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative). NDI-1 showed the most promising antibacterial activity with a minimum inhibitory concentration (MIC) of ∼7.8 μg/mL against S. aureus and moderate activity (MIC ∼ 125 μg/mL) against E. coli. In sharp contrast, NDI-3 did not show any significant activity against the bacteria, suggesting a strong impact of the H-bonding-regulated directional assembly. NDI-2, forming a fibrillar network, showed moderate activity against S. aureus and negligible activity against E. coli, highlighting a significant impact of the morphology. All of these three molecules were found to be compatible with mammalian cells from the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl-tetrazolium bromide (MTT) and hemolysis assay. The mechanistic investigation by membrane polarization assay, live/dead fluorescence assay, and microscopy studies confirmed the membrane disruption mechanism of cell killing for the lead candidate NDI-1.

A Triazolium-Anchored Self-Immolative Linker Enables Self-Assembly-Driven siRNA Binding and Esterase-Induced Release

The increased importance of RNA-based therapeutics comes with a need to develop next-generation stimuli-responsive systems capable of binding, transporting and releasing RNA oligomers. In this work, we describe triazolium-based amphiphiles capable of siRNA binding and enzyme-responsive release of the nucleic acid payload. In aqueous medium, the amphiphile self-assembles into nanocarriers that can disintegrate upon the addition of esterase. Key to the molecular design is a self-immolative linker that is anchored to the triazolium moiety and acts as a positively-charged polar head group. We demonstrate that addition of esterase leads to a degradation cascade of the linker, leaving the neutral triazole compound unable to form complexes and therefore releasing the negatively-charged siRNA. The reported molecular design and overall approach may have broad utility beyond this proof-of-principle study, because the underlying CuAAC "click" chemistry allows bringing together three groups very efficiently as well as cleaving off one of the three groups under the mild action of an esterase enzyme.

New Physical Hydrogels Based on Co-Assembling of FMOC-Amino Acids

In the last years, physical hydrogels have been widely studied due to the characteristics of these structures, respectively the non-covalent interactions and the absence of other necessary components for the cross-linking processes. Low molecular weight gelators are a class of small molecules which form higher ordered structures through hydrogen bonding and π-π interactions. In this context it is known that the formation of hydrogels based on FMOC-amino acids is determined by the primary structures of amino acids and the secondary structure arrangement (alpha-helix or beta-sheet motifs). The present study aimed to obtain supramolecular gels through co-assembly phenomenon using FMOC-amino acids as low molecular weight gelators. The stability of the new structures was evaluated by the vial inversion test, while FTIR spectra put into evidence the interaction between the compounds. The gel-like structure is evidenced by viscoelastic parameters in oscillatory shear conditions. SEM microscopy was used to obtain the visual insight into the morphology of the physical hydrogel network while DLS measurements highlighted the sol-gel transition. The molecular arrangement of gels was determined by circular dichroism, fluorescence and UV-Vis spectroscopy.

Molecular Recognition Driven Bioinspired Directional Supramolecular Assembly of Amphiphilic (Macro)molecules and Proteins

Bioinspired self-assembly has been explored with diverse synthetic scaffolds, among which amphiphiles are perhaps the most extensively studied systems. Classical surfactants or amphiphilic block copolymers, depending on the hydrophobic-hydrophilic balance, produce distinct nanostructures, which hold promise for applications ranging from biology to materials sciences. Nevertheless, their immiscibility-driven aggregation does not provide the opportunity to precisely regulate the internal order, morphology, or functional group display, which is highly desirable, especially in the context of biological applications.A new class of amphiphiles have emerged in the recent past in which the hydrophilic segment(s) is appended with a hydrophobic supramolecular-structure-directing-unit (SSDU), consisting of a π-conjugated chromophore and a H-bonding group. Self-recognition of the SSDU by attractive directional interactions governs the supramolecular assembly, which is fundamentally different than the repulsive solvent-immiscibility driven aggregation of traditional amphiphiles. Such SSDU-appended hydrophilic polymers exhibit entropy-driven highly stable self-assembly producing distinct nanostructures depending on the H-bonding functional group. For example, polymers with the hydrazide-functionalized SSDU attached form a polymersome, while in a sharp contrast, the same polymers when connected to an amide containing SSDU produce a cylindrical micelle via a spherical-micelle intermediate. This relationship holds true for a series of SSDU-attached hydrophilic polymers irrespective of the hydrophobic/hydrophilic balance or chemical structure, indicating that the supramolecular-assembly is primarily controlled by the specific molecular-recognition motif of the SSDU, instead of the packing parameter-based norms. Beyond synthetic polymers, SSDU-attached proteins also exhibit similar molecular-recognition driven self-assembly as well as coassembly with SSDU-attached polymers or hydrophilic wedges, producing multi-stimuli-responsive nanostructures in which the protein gains remarkable protection from thermal denaturation or enzymatic hydrolysis and exhibits redox-responsive enzymatic activity.Furthermore, SSDU-derived bola-shape π-amphiphiles have been recognized as a useful scaffold for the synthesis of unsymmetric polymersomes, rarely reported in the literature. The building block consists of a hydrophobic naphthalene-diimide (NDI) π-system attached to a hydrophilic functional group (ionic or nonionic) and a nonionic wedge on its two opposite arms. Extended H-bonding among the hydrazide groups, placed only on one side of the central chromophore by design, ensures stacking of the NDIs with parallel orientation and induces a preferred direction of curvature so that the H-bonded chain and consequently the functional groups attached to the same side remain at the inner-wall of the supramolecular polymersome. Automatically, the functional groups, located on the other side, are displayed at the outer surface. This design works for different amphiphiles, which by virtue of efficient and predictable functional group display, strongly influences the multivalent binding with different biological targets resulting in efficient enzyme inhibition, glycocluster effect, or antibacterial activity, depending on the nature of the functional group. By taking advantage of the electron accepting nature of the NDI, electron rich pyrene-containing amphiphiles can be costacked in alternating sequence, producing temperature and redox-responsive supramolecular polymers with NDI/pyrene stoichiometry-dependent morphology, lower critical solution temperature (LCST), functional group display, and antibacterial activity.

Two-component supramolecular hydrogel for controlled drug release

A hybrid gel has been developed by combining two supramolecular gelators. Each gelator endows the hybrid gel with its own characteristics. One gelator enables pH-mediated controlled release of the active pharmaceutical ingredient naproxen, while the other new gelator enhances mechanical stability. Self-assembly thus gives multi-functional gels with potential applications.

Rapid Self-Healing and Thixotropic Organogelation of Amphiphilic Oleanolic Acid-Spermine Conjugates

Natural and abundant plant triterpenoids are attractive starting materials for the synthesis of conformationally rigid and chiral building blocks for functional soft materials. Here, we report the rational design of three oleanolic acid-triazole-spermine conjugates, containing either one or two spermine units in the target molecules, using the Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction. The resulting amphiphile-like molecules 2 and 3, bearing just one spermine unit in the respective molecules, self-assemble into highly entangled fibrous networks leading to gelation at a concentration as low as 0.5% in alcoholic solvents. Using step-strain rheological measurements, we show rapid self-recovery (up to 96% of the initial storage modulus) and sol ⇔ gel transition under several cycles. Interestingly, rheological flow curves reveal the thixotropic behavior of the gels. To the best of our knowledge, this kind of behavior was not shown in the literature before, neither for a triterpenoid nor for its derivatives. Conjugate 4, having a bolaamphiphile-like structure, was found to be a nongelator. Our results indicate that the position and number of spermine units alter the gelation properties, gel strength, and their self-assembly behavior. Preliminary cytotoxicity studies of the target compounds 2-4 in four human cancer cell lines suggest that the position and number of spermine units affect the biological activity. Our results also encourage exploring other triterpenoids and their derivatives as sustainable, renewable, and biologically active building blocks for multifunctional soft organic nanomaterials.

Supramolecular nanoparticles self-assembled from reduction-responsive cabazitaxel prodrugs for effective cancer therapy

Using hydrophobic cabazitaxel as a target anticancer drug, we show that the conjugation of oligo(ethylene glycol)-oligolactide (OEG-OLA) via a self-immolative linkage induces the self-assembly of the resulting prodrug into injectable nanoparticles. The nanoparticles release chemically unmodified cabazitaxel after endocytosis in cancer cells. With the optimal conjugate, the nanotherapy not only potently induces tumor regression but also has a higher safety margin in animals than the free drug administered in its clinical formulation. Our studies highlight the design rationale that attaching a short amphiphilic oligomer to a toxic drug can convert it to a self-deliverable and safe nanotherapy.

Reintroducing mothur: 10 Years Later

More than 10 years ago, we published the paper describing the mothur software package in Applied and Environmental Microbiology Our goal was to create a comprehensive package that allowed users to analyze amplicon sequence data using the most robust methods available. mothur has helped lead the community through the ongoing sequencing revolution and continues to provide this service to the microbial ecology community. Beyond its success and impact on the field, mothur's development exposed a series of observations that are generally translatable across science. Perhaps the observation that stands out the most is that all science is done in the context of prevailing ideas and available technologies. Although it is easy to criticize choices that were made 10 years ago through a modern lens, if we were to wait for all of the possible limitations to be solved before proceeding, science would stall. Even preceding the development of mothur, it was necessary to address the most important problems and work backwards to other problems that limited access to robust sequence analysis tools. At the same time, we strive to expand mothur's capabilities in a data-driven manner to incorporate new ideas and accommodate changes in data and desires of the research community. It has been edifying to see the benefit that a simple set of tools can bring to so many other researchers.

Lost in (Clinical) Translation: Recent Advances in Heparin Neutralization and Monitoring

The heparin family, which includes unfractionated heparin, low-molecular heparin, and fondaparinux, is a class of drugs clinically used as intravenous blood thinners. To date, issues related to both the reversal of anticoagulation and the blood level determination of the anticoagulant at the point-of-care remain: while the only U.S. Food and Drug Administration (FDA) approved antidote for heparin displays serious efficacy and safety drawbacks, the current assays for heparin monitoring are indirect measurements subject to their own limitations and variations. Herein, we provide an update on the numerous recent chemical approaches to tackle these issues, from which it is clear that some new antidotes and sensors for heparin certainly have the potential to exceed current clinical standards. This review aims to review a field that requires close collaborations between physicians, biologists, and chemists in order to foster advances toward clinical translation.

Self-assembled multivalent (SAMul) ligand systems with enhanced stability in the presence of human serum

Self-assembled cationic micelles are an attractive platform for binding biologically-relevant polyanions such as heparin. This has potential applications in coagulation control, where a synthetic heparin rescue agent could be a useful replacement for protamine, which is in current clinical use. However, micelles can have low stability in human serum and unacceptable toxicity profiles. This paper reports the optimisation of self-assembled multivalent (SAMul) arrays of amphiphilic ligands to bind heparin in competitive conditions. Specifically, modification of the hydrophobic unit kinetically stabilises the self-assembled nanostructures, preventing loss of binding ability in the presence of human serum - cholesterol hydrophobic units significantly outperform systems with a simple aliphatic chain. It is demonstrated that serum albumin disrupts the binding thermodynamics of the latter system. Molecular simulation shows aliphatic lipids can more easily be removed from the self-assembled nanostructures than the cholesterol analogues. This agrees with the experimental observation that the cholesterol-based systems undergo slower disassembly and subsequent degradation via ester hydrolysis. Furthermore, by stabilising the SAMul nanostructures, toxicity towards human cells is decreased and biocompatibility enhanced, with markedly improved survival of human hepatoblastoma cells in an MTT assay.

Dendrigraft of Poly-l-lysine as a Promising Candidate To Reverse Heparin-based Anticoagulants in Clinical Settings

By using a combination of experimental and computational experiments, we demonstrated that a second-generation dendrigraft of poly-l-lysine neutralizes the anticoagulant activity of unfractionated heparin, low-molecular-weight heparin, and fondaparinux more efficiently than protamine does in human plasma, making this synthetic polymer a promising surrogate of this problematic protein in clinical settings.