In situ assembly of nickel-based ultrathin catalyst film for water oxidation

A nickel-based ultrathin catalyst film is assembled in situ from a solution of Ni(OAc)2 and a Schiff-base ligand L. The resulting ultrathin catalyst film shows a low overpotential of 330 mV, a steady current of 7 mA cm-2 for water oxidation over 10 h.

Tracking an FeV (O) Intermediate for Water Oxidation in Water

High-valent iron-oxo species are appealing for conducting O-O bond formation for water oxidation reactions. However, their high reactivity poses a great challenge to the dissection of their chemical transformations. Herein, we introduce an electron-rich and oxidation-resistant ligand, 2-[(2,2'-bipyridin)-6-yl]propan-2-ol to stabilize such fleeting intermediates. Advanced spectroscopies and electrochemical studies demonstrate a high-valent FeV (O) species formation in water. Combining kinetic and oxygen isotope labelling experiments and organic reactions indicates that the FeV (O) species is responsible for O-O bond formation via water nucleophilic attack under the real catalytic water oxidation conditions.

Strong coupling of super-hydrophilic and vacancy-rich g-C3N4 and LDH heterostructure for wastewater purification: Adsorption-driven oxidation

Adsorption and wettability are crucial components of catalytic oxidation. To increase the reactive oxygen species (ROS) generation/utilization efficiency of peroxymonosulfate (PMS) activators, defect engineering and 2D nanosheet characteristics were used to regulate electronic structures and expose more active sites. Two-dimensional (2D) super-hydrophilic heterostructure by connecting cobalt species modified nitrogen vacancy-rich g-C₃N₄ (V_n-CN) and LDH (V_n-CN/Co/LDH) with high-density active sites and multi-vacancies, as well as high conductivity and adsorbability, to expedite ROS generation. The degradation rate constant of ofloxacin (OFX) was 0.441 min^-1 via the V_n-CN/Co/LDH/PMS system, which was 1-2 orders greater than in the previous studies. Confirmation of the contribution ratios of various reactive oxygen species (ROS), SO₄^·- and ¹O₂ in bulk solution, O₂^·- on the catalyst surface was the most abundant ROS. The catalytic membrane was constructed utilizing Vn-CN/Co/LDH as the assembly element. The 2D membrane achieved the continuous effective discharge of OFX in the simulated water after 80 h/4 cycles of continuous flowing-through filtration-catalysis. This study provides fresh insights into designing a PMS activator for environmental remediation activated on demand.

Regulable metal-oxo-bridge configurations as electron transfer bridge to promote Cu(II)/Cu(I) redox behavior for efficient peroxymonosulfate activation

Constructing metal-oxo-bridge coordination as electron transfer bridge is benefit for the catalysis acceleration towards water pollutants treatment. In this work, regulable Cu-O-C configuration was constructed through tunable ratio of copper aluminum oxide (CuAl_xO_y) and porous g-C₃N₄ (p-CN), employed as electron transfer bridge for Cu^(II)/Cu^(I) redox behavior modulation to realize sufficient peroxymonosulfate (PMS) activation. A series of characterization demonstrated that the composites presents porous structure for p-CN contribution, and the oxygen content plays crucial role in Cu-O-C bonds fabrication. The proper ratio of CuAl_xO_y and p-CN is conducive to create an oxygen-rich environment, resulting in high dispersed copper atoms connect with oxygen in p-CN matrix. As a result, 2:1 CuAl@p-CN possesses appropriate Cu-O-C configuration, has favorable electron transfer environment for rapid redox behavior of Cu^(II)/Cu^(I), leading to excellent PMS activation for mirco-polluted veterinary antibiotics elimination. The activated PMS produced active species and followed the priority order of ¹O₂ > SO₄•^- > •OH for contaminants degradation, and the specific porous structure reduce the migration distance of active species for efficient catalysis. This study offers a deeper insight into the construction of regulable metal-oxo-bridge configurations for electron transfer towards PMS activation and contributes to an efficient strategy for wastewater remediation.

Bioinspired metal complexes for energy-related photocatalytic small molecule transformation

Bioinspired transformation of small-molecules to energy-related feedstocks is an attractive research area to overcome both the environmental issues and the depletion of fossil fuels. The highly effective metalloenzymes in nature provide blueprints for the utilization of bioinspired metal complexes for artificial photosynthesis. Through simpler structural and functional mimics, the representative herein is the pivotal development of several critical small molecule conversions catalyzed by metal complexes, e.g., water oxidation, proton and CO₂ reduction and organic chemical transformation of small molecules. Of great achievement is the establishment of bioinspired metal complexes as catalysts with high stability, specific selectivity and satisfactory efficiency to drive the multiple-electron and multiple-proton processes related to small molecule transformation. Also, potential opportunities and challenges for future development in these appealing areas are highlighted.

Facile Construction of a Copper-Containing Covalent Bond for Peroxymonosulfate Activation: Efficient Redox Behavior of Copper Species via Electron Transfer Regulation

Heterogeneous catalysis can be enhanced through the construction of effective atom connection for rapid electron transport on the catalyst surface. Hence, this study proposed a new strategy for electron transfer regulation to facilitate redox cycle of Cu(II)/Cu(I). The objective was achieved by successful construction of copper-containing covalent bond through the in situ growth of porous g-C₃N₄ with oxygen dopants and nitrogen defects (O-CN_D) on CuAl_xO_y substrate (CuAl@O-CN_D). On the basis of X-ray absorption fine structure (XAFS) and other characterization results, the facilitated redox behavior of copper species by electron transfer regulation was ascribed to the formation of a C-O-Cu bond on the porous-rich superficial of the catalyst; these covalent C-O-Cu bonds shortened the migration distance of electrons between Cu(II) and Cu(I) via Cu(I)-O-C-O-Cu(II) bridge. The construction of copper-containing covalent bonds in the catalyst resulted in efficient PMS activation for a rapid redox cycle of Cu(II)/Cu(I), triggering a series of reactions involving the continuous production of three highly active species (SO₄^·-, ^·OH and ¹O₂). The rapid diffusion and transportation of the generated active species from porous structures directly attack typical pharmaceutically active compounds (PhACs), achieving superior catalytic performance. This study provides a new routine to construct a C-O-Cu bond for PMS activation by regulating the electron transfer to accelerate the redox behavior of copper species for environmental remediation.

Water Oxidation at Neutral pH using a Highly Active Copper-Based Electrocatalyst

The sluggish kinetics of the oxygen evolution reaction (OER) at the anode severely limit hydrogen production at the cathode in water splitting systems. Although electrocatalytic systems based on cheap and earth-abundant copper catalysts have shown promise for water oxidation under basic conditions, only very few examples with high overpotential can be operated under acidic or neutral conditions, even though hydrogen evolution in the latter case is much easier. This work presents an efficient and robust Cu-based molecular catalyst, which self-assembles as a periodic film from its precursors under aqueous conditions on the surface of a glassy carbon electrode. This film catalyzes the OER under neutral conditions with impressively low overpotential. In controlled potential electrolysis, a stable catalytic current of 1.0 mA cm^-2 can be achieved at only 2.0 V (vs. RHE) and no significant decrease in the catalytic current is observed even after prolonged bulk electrolysis. The catalyst displays first-order kinetics and a single site mechanism for water oxidation with a TOF (k_cat ) of 0.6 s^-1 . DFT calculations on of the periodic Cu(TCA)₂ (HTCA=1-mesityl-1H-1,2,3-triazole-4-carboxylic acid) film reveal that TCA defects within the film create Cu^I active sites that provide a low overpotential route for OER, which involves Cu^I , Cu^II -OH, Cu^III =O and Cu^II -OOH intermediates and is enabled at a potential of 1.54 V (vs. RHE), requiring an overpotential of 0.31 V. This corresponds well with an overpotential of approximately 0.29 V obtained experimentally for the grown catalytic film after 100 CV cycles at pH 6. However, to reach a higher current density of 1 mA cm^-2 , an overpotential of 0.72 V is required.

Substituent changes in the salen ligands of CuIINaI-complexes to induce various structures and catalytic activities towards 2-imidazolines from nitriles and 1,2-diaminopropane

Based on various comparable salen ligands, three synthesized CuIINaI-complexes present efficient catalytic activities for the coupling and cyclization reaction of 1,2-diaminopropane with nitriles towards 2-imidazolines. The catalytic results show that salen ligands with an electron-donating substituent and small steric hindrance improve the catalytic activity.

An octanuclear Cu(ii) cluster with a bio-inspired Cu4O4 cubic fragment for efficient photocatalytic water oxidation

An octanuclear Cu(ii) cluster [Cu₈(dpk·OH)₈(OAc)₄](ClO₄)₄ was found to be an efficient homogeneous catalyst for photocatalytic water oxidation with an oxygen yield, TON and TOF of 35.6%, 178 and 3.6 s⁻¹, respectively.