Unlocking the Potential: Atomically Thin 2D Fluoritene from Exfoliated Fluorite Ore and Its Electrochemical Activity

Fluorite mineral holds significant importance because of its optoelectronic properties and wide range of applications. Here, we report the successful exfoliation of bulk fluorite ore (calcium fluoride, CaF2) crystals into atomically thin two-dimensional fluoritene (2D CaF2) using a highly scalable liquid-phase exfoliation method. The microscopic and spectroscopy characterizations show the formation of (111) plane-oriented 2D CaF2 sheets with exfoliation-induced material strain due to bond breaking, leading to the changes in lattice parameter. Its potential role in electrocatalysis is further explored for deeper insight, and a probable mechanism is also discussed. The 2D CaF2 with long-term stability shows overpotential values of 670 and 770 mV vs RHE for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively, at 10 mA cm-2. Computational simulations demonstrate the unique "direct-indirect" band gap switching with odd and even numbers of layers. Current work offers new avenues for exploring the structural and electrochemical properties of 2D CaF2 and its potential applicability.

P(V)-Promoted Rh-Catalyzed Highly Regioselective Hydroformylation of Styrenes under Mild Conditions

Hydroformylation of olefins is widely used in the chemical industry due to its versatility and the ability to produce valuable aldehydes with 100% atom economy. Herein, a hybrid phosphate promoter was found to efficiently promote rhodium-catalyzed hydroformylation of styrenes under remarkably mild conditions with high regioselectivities. Preliminary mechanistic studies revealed that the weak coordination between the Rhodium and the P=O double bond of this pentavalent phosphate likely induced exceptional reactivity and high ratios of branched aldehydes to linear products.

Graphene Architecture-Supported Porous Cobalt-Iron Fluoride Nanosheets for Promoting the Oxygen Evolution Reaction

The design of efficient oxygen evolution reaction (OER) electrocatalysts is of great significance for improving the energy efficiency of water electrolysis for hydrogen production. In this work, low-temperature fluorination and the introduction of a conductive substrate strategy greatly improve the OER performance in alkaline solutions. Cobalt-iron fluoride nanosheets supported on reduced graphene architectures are constructed by a one-step solvothermal method and further low-temperature fluorination treatment. The conductive graphene architectures can increase the conductivity of catalysts, and the transition metal ions act as electron acceptors to reduce the Fermi level of graphene, resulting in a low OER overpotential. The surface of the catalyst becomes porous and rough after fluorination, which can expose more active sites and improve the OER performance. Finally, the catalyst exhibits excellent catalytic performance in 1 M KOH, and the overpotential is 245 mV with a Tafel slope of 90 mV dec-1, which is better than the commercially available IrO2 catalyst. The good stability of the catalyst is confirmed with a chronoamperometry (CA) test and the change in surface chemistry is elucidated by comparing the XPS before and after the CA test. This work provides a new strategy to construct transition metal fluoride-based materials for boosted OER catalysts.

Morphology Modulation and Phase Transformation of Manganese-Cobalt Carbonate Hydroxide Caused by Fluoride Doping and Its Effect on Boosting the Overall Water Electrolysis

Increasing demands for pollution-free energy resources have stimulated intense research on the design and fabrication of highly efficient, inexpensive, and stable non-noble earth-abundant metal catalysts with remarkable catalytic activity for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Morphology control of the catalysts is widely implemented as an effective strategy to change the surface atomic coordination and increase the catalytic behavior of the catalysts. In this study, we have designed a series of Mn-Co catalyts with different morphologies on the graphite paper substrate to enhance OER and HER activities in alkaline media. The prepared catalysts with different morphologies were successfully obtained by adjusting the amount of ammonium fluoride (NH₄F) in the hydrothermal process. The electrochemical tests display that the cubic-like Mn-Co catalyst with pyramids on the faces at a concentration of 0.21 M NH₄F exhibits the best activity toward both OER and HER. The cubic-like Mn-Co catalyst with pyramids on the faces showed overpotentials of 240 and 82 mV at a current density of 10 mA cm^-2 for OER and HER, respectively. Also, the cubic-like Mn-Co catalyst with pyramids on the faces required overpotentials of 319 and 216 mV to reach the current density of 100 mA cm^-2 for OER and HER, respectively. The current density of this catalyst at η = 0.32 V was 701.05 mA cm^-2 for OER, and for HER, the current density of the catalyst was 422.89 mA cm^-2 at η = 0.23 V. The Tafel slopes of the Mn-Co catalyst with cubic-like structures with pyramids on the faces were 78 and 121 mV dec^-1 for OER and HER, respectively. A two-electrode overall water electrolysis system using this bifunctional Mn-Co catalyst exhibited low cell voltages of 1.60 in the alkaline electrolyte at the standard current density of 10 mA cm^-2 with appropriate stability. These electrochemical merits exhibit the considerable potential of the cubic-like Mn-Co catalyst with pyramids on the faces for bifunctional OER and HER applications.

Boosting the Oxygen Evolution Reaction by Controllably Constructing FeNi3/C Nanorods

Transition bimetallic alloy-based catalysts are regarded as attractive alternatives for the oxygen evolution reaction (OER), attributed to their competitive economics, high conductivity and intrinsic properties. Herein, we prepared FeNi3/C nanorods with largely improved catalytic OER activity by combining hydrothermal reaction and thermal annealing treatment. The temperature effect on the crystal structure and chemical composition of the FeNi3/C nanorods was revealed, and the enhanced catalytic performance of FeNi3/C with an annealing temperature of 400 °C was confirmed by several electrochemical tests. The outstanding catalytic performance was assigned to the formation of bimetallic alloys/carbon composites. The FeNi3/C nanorods showed an overpotential of 250 mV to afford a current density of 10 mA cm−2 and a Tafel slope of 84.9 mV dec−1, which were both smaller than the other control samples and commercial IrO2 catalysts. The fast kinetics and high catalytic stability were also verified by electrochemical impendence spectroscopy and chronoamperometry for 15 h. This study is favorable for the design and construction of bimetallic alloy-based materials as efficient catalysts for the OER.

Controlled synthesis of trimetallic nitrogen-incorporated CoNiFe layered double hydroxide electrocatalysts for boosting the oxygen evolution reaction

The development of non-precious trimetallic electrocatalysts exhibiting high activity and stability is a promising strategy for fabricating efficient electrocatalysts for the oxygen evolution reaction (OER). In this study, trimetallic nitrogen-incorporated CoNiFe (N–CoNiFe) was produced to solve the low OER efficiency using a facile co-precipitation method in the presence of ethanolamine (EA) ligands. A series of CoNiFe catalysts at different EA concentrations were also investigated to determine the effects of the ligand in the co-precipitation of a trimetallic system. The introduction of an optimized EA concentration (20 mM) improved the electrocatalytic performance of N–CoNiFe dramatically, with an overpotential of 318 mV at 10 mA cm⁻² in 1.0 M KOH and a Tafel slope of 72.2 mV dec⁻¹. In addition, N–CoNiFe shows high durability in the OER process with little change in the overpotential (ca. 16.0 mV) at 10 mA cm⁻² after 2000 cycles, which was smaller than that for commercial Ir/C (38.0 mV).

A trimetallic nitrogen-incorporated CoNiFe exhibited good catalytic properties toward the oxygen evolution reaction, e.g., high stability and low overpotential (318 mV at 10 mA cm⁻²).

Engineering Thiospinel-Based Hollow Heterostructured Nanoarrays for Boosting Electrocatalytic Oxygen Evolution Reaction

Thiospinel, known as a member of spinel, has been demonstrated to be promising for boosting electrocatalytic oxygen evolution reaction (OER), while their practical application is severely impeded by the limited...

Nickel-cobalt oxalate as an efficient non-precious electrocatalyst for an improved alkaline oxygen evolution reaction

The quest for developing next-generation non-precious electrocatalysts has risen in recent times. Herein, we have designed and developed a low cost electrocatalyst by a ligand-assisted synthetic strategy in an aqueous medium. An oxalate ligand-assisted non-oxide electrocatalyst was developed by a simple wet-chemical technique for alkaline water oxidation application. The synthetic parameters for the preparation of nickel-cobalt oxalate (Ni_2.5Co₅C₂O₄) were optimized, such as the metal precursor (Ni/Co) ratio, oxalic acid amount, reaction temperature, and time. Microstructural analysis revealed a mesoporous block-like architecture for nickel-cobalt oxalate (Ni_2.5Co₅C₂O₄). The required overpotential of Ni_2.5Co₅C₂O₄ for the alkaline oxygen evolution reaction (OER) was found to be 330 mV for achieving 10 mA cm_geo ^-2, which is superior to that of NiC₂O₄, CoC₂O₄, NiCo₂O₄ and the state-of-the-art RuO₂. The splendid performance of Ni_2.5Co₅C₂O₄ was further verified by its low charge transfer resistance, impressive stability performance, and 87% faradaic efficiency in alkaline medium (pH = 14). The improved electrochemical activity was further attributed to double layer capacitance (C _dl), which indefinitely divulged the inferiority of NiCo₂O₄ compared to Ni_2.5Co₅C₂O₄ for the alkaline oxygen evolution reaction (OER). The obtained proton reaction order (ρ _RHE) was about 0.80, thus indicating the proton decoupled electron transfer (PDET) mechanism for OER in alkaline medium. Post-catalytic investigation revealed the formation of a flake-like porous nanostructure, indicating distinct transformation in morphology during the alkaline OER process. Further, XPS analysis demonstrated complete oxidation of Ni²⁺ and Co²⁺ centres into Ni³⁺ and Co³⁺, respectively under high oxidation potential, thereby indicating active site formation throughout the microstructural network. Additionally, from BET-normalised LSV investigation, the intrinsic activity of Ni_2.5Co₅C₂O₄ was also found to be higher than that of NiCo₂O₄. Finally, Ni_2.5Co₅C₂O₄ delivered a TOF value of around 3.28 × 10^-3 s^-1, which is 5.56 fold that of NiCo₂O₄ for the alkaline OER process. This report highlights the unique benefit of Ni_2.5Co₅C₂O₄ over NiCo₂O₄ for the alkaline OER. The structure-catalytic property relationship was further elucidated using density functional theory (DFT) study. To the best of our knowledge, nickel-cobalt oxalate (Ni_2.5Co₅C₂O₄) was introduced for the first time as a non-precious non-oxide electrocatalyst for alkaline OER application.

Facile Synthesis of Bimetallic Fluoride Heterojunctions on Defect-Enriched Porous Carbon Nanofibers for Efficient ORR Catalysts

The development of efficient and stable catalysts for the oxygen reduction reaction (ORR) at low cost is crucial for realizing the large-scale application of metal-air batteries. Herein, we report an efficient ORR catalyst of bimetallic copper and cobalt fluoride heterojunctions, which are uniformly dispersed in nitrogen-fluorine-oxygen triply doped porous carbon nanofibers (PCNFs) that contain hierarchical macro-meso-micro pores. The composite catalyst materials are fabricated with a facile and green method of electrospinning with water as the solvent. By using poly(tetrafluoroethylene) as the pore inducer to anchor electropositive copper and cobalt salts in the electrospun hybrid nanofibers, bimetallic fluoride heterojunctions can be directly formed in PCNFs after calcination. The hierachical porous structures provide an effective way to transport matter, while the bimetallic fluorides expose abundant electroactive sites, both of which result in stable ORR activities with a high half-wave potential of 0.84 V. The study proposes a feasible strategy for the fabrication of nonprecious catalysts.

Mechanochemical synthesis of cobalt/copper fluorophosphate generates a multifunctional electrocatalyst

The utilisation of inductive effects is emerging as a powerful tool to enhance material properties. Within the context of electrocatalysis, such effects may alter an active site's electronic structure and consequently, its catalytic activity. To this end, we introduce catalytically active cobalt species within an electron-withdrawing copper fluorophosphate host via a mechanochemical synthetic method. The resulting mixed-metal material features exceptional performance towards electrochemical water oxidation (η of ∼300 mV for 100 mA cm^-2) and biomass valorisation (95% selectivity for 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid conversion), thus opening avenues for the rational design of heterogeneous catalysts.

Amorphous Intermediate Derivative from ZIF-67 and Its Outstanding Electrocatalytic Activity

Increasing active sites is an effective method to enhance the catalytic activity of catalysts. Amorphous materials have attracted considerable attention in catalysis because of their abundant catalytic active sites. Herein, a series of derivatives is prepared via the low-temperature heat treatment of ZIF-67 hollow sphere at different temperatures. An intermediate product with an amorphous structure is formed during transformation from ZIF-67 to Co₃ O₄ nanocrystallines when ZIF-67 hollow sphere is heat treated at 260 °C for 3 h. The chemical composition of the amorphous derivative is similar to that of ZIF-67, and the carbon and nitrogen contents of the amorphous derivative are obviously higher than those of crystalline samples obtained at 270 °C or higher. As electrocatalysts for the oxygen evolution reaction (OER) and nonenzymatic glucose sensing, the amorphous derivative exhibits significantly better catalytic activity than crystalline Co₃ O₄ samples. The amorphous sample as an OER catalyst has a low overpotential of 352 mV at 10 mA cm^-2 . The amorphous sample as an enzyme-free glucose sensing catalyst can provide a low detection limit of 3.9 × 10^-6 m and a high sensitivity of 1074.22 µA mM^-1 cm^-2 .

Synergistically boosting the oxygen evolution reaction of an Fe-MOF via Ni doping and fluorination

An efficient approach to boost the oxygen evolution activity of Fe-MOF nanorods was demonstrated by a synergistic strategy of Ni doping and fluorination.

Pd–NiO-Y/CNT nanofoam: a zeolite-carbon nanotube conjugate exhibiting high durability in methanol oxidation

Pd–NiO hybridized with zeolite and multiwalled carbon nanotube appeared as highly effective electrocatalyst in methanol oxidation reaction.

Investigation of mixed-metal (oxy)fluorides as a new class of water oxidation electrocatalysts

The development of electrocatalysts for the oxygen evolution reaction (OER) is one of the principal challenges in the area of renewable energy research.

The development of electrocatalysts for the oxygen evolution reaction (OER) is one of the principal challenges in the area of renewable energy research. Within this context, mixed-metal oxides have recently emerged as the highest performing OER catalysts. Their structural and compositional modification to further boost their activity is crucial to the wide-spread use of electrolysis technologies. In this work, we investigated a series of mixed-metal F-containing materials as OER catalysts to probe possible benefits of the high electronegativity of fluoride ions. We found that crystalline hydrated fluorides, CoFe₂F₈(H₂O)₂ and NiFe₂F₈(H₂O)₂, and amorphous oxyfluorides, NiFe₂F_4.4O_1.8 and CoFe₂F_6.6O_0.7, feature excellent activity (overpotential for 10 mA cm^–2 as low as 270 mV) and stability (extended performance for >250 hours with ∼40 mV activity loss) for the OER in alkaline electrolyte. Subsequent electroanalytical and spectroscopic characterization hinted that the electronic structure modulation conferred by the fluoride ions aided their reactivity. Finally, the best catalyst of the set, NiFe₂F_4.4O_1.8, was applied as anode in an electrolyzer comprised solely of earth-abundant materials, which carried out overall water splitting at 1.65 V at 10 mA cm^–2.

Fluoridated Iron-Nickel Layered Double Hydroxide for Enhanced Performance in the Oxygen Evolution Reaction

Layered double hydroxides (LDHs) are very promising but still far from satisfactory for catalyzing the electrochemical oxygen evolution reaction (OER) in water electrolysis. Herein, it was found that the catalytic performance of iron-nickel LDHs for OER can be largely boosted by a facile and controllable fluoridation approach at low temperatures. Temperature dependence of the crystal structure and surface chemical state was observed for the simple fluoridation of the iron-nickel LDH. However, no significant surface roughness and electrochemical active surface area increases were found, which was probably owing to the structure change from nanosheets to nanorods. Significant improvements in the performance, including the catalytic activity, stability, efficiency, and kinetics, were found compared with the pristine iron-nickel LDH. Specifically, iron-nickel fluoride obtained at 250 °C afforded the lowest overpotential of 225 mV (no iR correction) to drive 10 mA cm^-2 loaded on an inert glassy carbon electrode with a small Tafel slope of 79 mV dec^-1 , outperforming the noble-metal IrO₂ catalyst and most of the similar Fe-Ni based catalysts. The performance improvement could be mainly attributed to the phase-structure transfer from metal-O bonding in the FeNi-LDHs to metal-F bonding after fluoridation, which means it is easier to form the real active sites of Fe-doped high-valence Ni-(oxy)hydroxide over the iron-nickel fluoride surface.

Pt nanoparticles anchored over Te nanorods as a novel and promising catalyst for methanol oxidation reaction

Pt/Te nanorods exhibited excellent catalytic performance for methanol oxidation in both acidic and alkaline electrolytes.

Fluorine anion-enriched nickel hydroxyl oxide as an efficient oxygen evolution reaction electrocatalyst

F⁻ anions-enriched Ni hydroxyl oxide (F-NHO) mesocrystalline microspheres were prepared by a facile hydrothermal hydrolysis of a Ni precursor mediated by NH₄F.

Surface chemical state evaluation of CoSe2 catalysts for the oxygen evolution reaction

The critical condition for efficient metallic Co–Se bonding construction and its significance for the oxygen evolution reaction were demonstrated.

An Fe-doped NiTe bulk crystal as a robust catalyst for the electrochemical oxygen evolution reaction

An Fe doped NiTe bulk crystal was demonstrated to exhibit an extremely active and stable performance for the electrochemical oxygen evolution reaction.

Shape-controlled synthesis of Co3O4 for enhanced electrocatalysis of the oxygen evolution reaction

One-dimensional Co₃O₄ nanorods, two-dimensional nanosheets and three-dimensional nanocubes were synthesized; the effect of the morphology on their electrocatalytic activities was studied.

A two-dimensional Ni(ii) coordination polymer based on a 3,5-bis(1′,2′,4′-triazol-1′-yl)pyridine ligand for water electro-oxidation

A two-dimensional Ni(ii) coordination polymer based on a novel 3,5-bis(1′,2′,4′-triazol-1′-yl)pyridine rigid ligand was proposed as a novel and efficient molecular catalyst for water oxidation.

Electrochemical oxygen evolution reaction efficiently boosted by thermal-driving core-shell structure formation in nanostructured FeNi/S, N-doped carbon hybrid catalyst

Water electrolysis has not yet been implemented on a large scale due to the sluggish oxygen evolution reaction (OER). Herein, we for the first time discover an interesting core-shell structure formation driven by the Kirkendall effect in a nanostructured FeNi alloy incorporating S, N-doped carbon (FeNi/SN-C) and this structural transformation can greatly boost the alloy's catalytic ability for OER. Thermal annealing of FeNi/SN-C in air induces the formation of an Fe-rich Fe-Ni oxide shell over the Fe-Ni alloy core due to the different metal diffusion rates and oxygen coupling abilities. As a powder catalyst, an overpotential as low as 230 mV can drive 10 mA cm-2, about 30 mV less than the original catalyst; it outperforms most nonprecious metal catalysts and noble commercial IrO2 catalysts. The catalytic performances are probably derived from the oxidized Fe-rich oxidation shell in contact with the conductive FeNi/SN-C host, which chemically stabilizes and further activates the active sites formed during the reaction. It is also concluded that exposure of the metal oxide shell contributes more to the activity than the large surface area contributed by the porous carbon matrix. This work puts forward a novel and efficient strategy to optimize Fe-Ni-based catalysts for OER by in situ structure and morphology tuning.

Roles of soluble species in the alkaline oxygen evolution reaction on a nickel anode

The roles of soluble Fe and Ni species in the alkaline oxygen evolution reaction (OER) at a Ni anode are reported. The Fe impurities in the electrolyte turn out to be insufficient to directly improve the OER activity. The Ni(OH)2/NiOOH film undergoes chemical dissolution to give a stable Ni(ii) species that plays a hindering role in the OER.

A comparative study of NiCo2O4 catalyst supported on Ni foam and from solution residuals fabricated by a hydrothermal approach for electrochemical oxygen evolution reaction

Residuals should be given more attention when catalyst is prepared using the hydrothermal fabrication approach.