Understanding the role of co-surfactants in microemulsions on the growth of copper oxalate using SAXS

Surface-Initiated Reversible Addition-Fragmentation Chain Transfer Polymerization (SI-RAFT) to Produce Molecularly Imprinted Polymers on Graphene Oxide for Electrochemical Sensing of Methylparathion

A nonenzymatic redox-responsive sensor was put forward for the detection of methylparathion (MP) by designing globular nanostructures of molecularly imprinted polymers on graphene oxide (GO@MIPs) via surface-initiated reversible addition-fragmentation chain transfer polymerization (SI-RAFT). Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), and small-angle X-ray scattering (SAXS) studies have confirmed the successful formation of receptor layers of MIPs on RAFT agent-functionalized GO sheets. The electrochemical signal with an amplified current response was attained because of the enhanced diffusion rate of ions at the interface provided by widening the pore size of the MIP film. The analytical response of GO@MIPs, validated by recording square-wave anodic stripping voltammetry (SWASV) at varying MP concentrations, followed the linear response between 0.2 and 200 ng/mL. Under optimized conditions, the sensor exhibited a limit of detection of 4.25 ng/mL with high selectivity over other interfering ions or molecules. The anti-interfering ability and good recovery (%) in food samples directed the use of the proposed sensor toward real-time monitoring and also toward future mimicking of surfaces.

Development and Optimization of Andrographis paniculata Extract-Loaded Self-Microemulsifying Drug Delivery System Using Experimental Design Model

The objectives of this study were to develop an optimized formulation for an Andrographis paniculata extract (AGPE)-loaded self-microemulsifying drug delivery system (SMEDDS) using an experimental design and evaluate the characteristics of the developed SMEDDS. The solubility of andrographolide (AGP) in various solvents was investigated. The pseudo-ternary phase was constructed to provide an optimal range for each component to form microemulsions (MEs). The formulation was optimized using an I-optimal design mixture type, where the physical stability, droplet size, polydispersity index, and zeta potential were examined. Soft capsules of the optimized AGPE-loaded SMEDDS were manufactured. The dissolution and ex vivo membrane permeation were studied. Oleic acid, Tween® 80, and PEG 400 were the best solubilizers for AGP. The promising surfactant to co-surfactant ratio to generate ME was 3:1. The optimized SMEDDS contained 68.998% Tween® 80, with 13.257% oleic acid and 17.745% PEG 400. The assayed content of AGP, uniformity of dosage unit, and stability complied with the expected specifications. The dissolution and membrane permeability of AGPE-loaded SMEDDS was significantly improved from the A. paniculata extract (p < 0.05). All in all, the developed optimized AGPE-loaded SMEDDS was proven to contain optimal composition and AGP content where a stable ME could spontaneously be formed with enhanced delivery efficacy.

Template-Directed Polymerization of Binary Acrylate Monomers on Surface-Activated Lignin Nanoparticles in Toughening of Bio-Latex Films

Fabricating bio-latex colloids with core-shell nanostructure is an effective method for obtaining films with enhanced mechanical characteristics. Nano-sized lignin is rising as a class of sustainable nanomaterials that can be incorporated into latex colloids. Fundamental knowledge of the correlation between surface chemistry of lignin nanoparticles (LNPs) and integration efficiency in latex colloids and from it thermally processed latex films are scarce. Here, an approach to integrate self-assembled nanospheres of allylated lignin as the surface-activated cores in a seeded free-radical emulsion copolymerization of butyl acrylate and methyl methacrylate is proposed. The interfacial-modulating function on allylated LNPs regulates the emulsion polymerization and it successfully produces a multi-energy dissipative latex film structure containing a lignin-dominated core (16% dry weight basis). At an optimized allyl-terminated surface functionality of 1.04 mmol g^-1 , the LNPs-integrated latex film exhibits extremely high toughness value above 57.7 MJ m^-3 . With multiple morphological and microstructural characterizations, the well-ordered packing of latex colloids under the nanoconfinement of LNPs in the latex films is revealed. It is concluded that the surface chemistry metrics of colloidal cores in terms of the abundance of polymerization-modulating anchors and their accessibility have a delicate control over the structural evolution of core-shell latex colloids.

Development of nanostructured lipid carriers as a promising tool for methotrexate delivery: physicochemical and in vitro evaluation

The aim of the present study is to fabricate the stable nanostructured lipid carriers (NLCs) using biocompatible excipients for the encapsulation of Methotrexate (MTX), a chemotherapeutic agent for breast cancer treatment. MTX has restricted clinical applications owing to its low solubility, non-specific targeting and adverse side effects. Glyceryl Monostearate (GMS) and Miglyol 812 (MI1) were chosen as solid and liquid lipids, respectively, for the fabrication of NLCs, and the influence of variation of solid and liquid composition was investigated. The prepared NLCs exhibited long-term stability and spherical shape morphology as characterized by electron microscopy. The internal structure of fabricated NLCs was arranged into cubic crystalline as confirmed by small-angle X-ray scattering (SAXS) analysis. MTX's encapsulation efficiency of ∼85 ± 0.9%. and sustained in vitro release of MTX ∼ 52% ± 3.0 in 24 h was achieved. Classical molecular dynamics (MD) simulations were performed to study the structural stability of the MTX encapsulated NLCs. Hemolysis carried out on the NLCs showcased the biosafety of the formulation under the tolerance limit (<10%). Further, the MTT assay demonstrates that MTX-loaded NLCs exhibited toxicity against HeLa and MCF-7 cell lines as compared to blank NLCs. The finding demonstrates NLCs as promising vehicles for MTX delivery to address cancer.Communicated by Ramaswamy H. Sarma.

The effect of sonication on the ion exchange constant, KXBr of CTABr/chlorobenzoates micellar systems

The ion exchange constant, KXBr (for the case of cetyltrimethylammonium bromide, CTABr, in this study) is a method dependant characterization of ion exchange process by counterions, X and Br with different relative binding ratios. In this report, the ion exchange constant, KXBr values for micelle systems irradiated under 2 min of sonication at 120 W power using a probe sonicator with 1 cm tip were determined to be 85.2, 125.6 and 122.4 when X  = o-, m- and p-chlorobenzoates, respectively. The values were quantified using a semiempirical kinetic method coupled with Pseudophase Micellar model, and later compared to the same system in the absence of sonication. The sonication was found to amplify the KXBr values by ~ 13-fold for X  = o-chlorobenzoate and ~ 2.5-fold for X  = m- and p-chlorobenzoates. This is due to the improvement of ion exchange process by the oscillation of bubbles generated by acoustic cavitation. An active ion exchange process indicates better stabilization of the micelle aggregational structure by the penetration of the introduced counterions, X into the micelle Stern layer leading to the growth of the micelle. This is supported by the remarkable increase in the viscosity of the micelle system by > 7-fold for X  = o-chlorobenzoate and by > 2-folds for X  = m- and p-chlorobenzoates. Sonication was also found to induce maximum viscoelasticity at lower concentration ratio of [CTABr]:[X]. The ability of ultrasound to induce micelle growth and exhibiting viscoelasticity at lower concentration of counterionic additive will be very useful in technologies where viscoelastic solution is desired such as in oil drilling and centralized heating and cooling system.

Mechanistic Investigations of Growth of Anisotropic Nanostructures in Reverse Micelles

Tailoring the characteristics of anisotropic nanostructures like size, morphology, aspect ratio, and size dispersity is of extreme importance due to the unique and tunable properties including catalytic, optical, photocatalytic, magnetic, photochemical, electrochemical, photoelectrochemical, and several other physical properties. The reverse microemulsion (RM) method offers a useful soft-template and low-temperature procedure that, by variation of experimental conditions and nature of reagents, has proved to be extremely versatile in synthesis of nanostructures with tailored properties. Although many reports of synthesis of nanostructures by the RM method exist in the literature, most of the research studies carried out still follow the "hit and trial" method where the synthesis conditions, reagents, and other factors are varied and the resulting characteristics of the obtained nanostructures are justified on the basis of existing physical chemistry principles. Mechanistic investigations are scarce to generate a set of empirical rules that would aid in preplanning the RM-based synthesis of nanostructures with desired characteristics as well as make the process viable on an industrial scale. A consolidation of such research data available in the literature is essential for providing future directions in the field. In this perspective, we analyze the literature reports that have investigated the mechanistic aspects of growth of anisotropic nanostructures using the RM method and distil the essence of the present understanding at the nanoscale timescale using techniques like FCS and ultrafast spectroscopy in addition to routine techniques like DLS, fluorescence, TEM, etc.

In Situ and Real-Time Monitoring of Nanoparticle Formation in Microemulsion by Means of Dielectric Spectroscopy

Dielectric spectroscopy was employed, for the first time, to monitor the formation process of silica nanoparticles in a nonionic surfactant-based microemulsion in situ and in real time. Two dominant relaxations were observed in the frequency range of 1 MHz-3 GHz during this process. The relaxation at the lower frequency range was confirmed to be mainly ascribed to interfacial polarization, whose relaxation parameters, together with the electrical property of the synthesis system, were used to characterize the evolution of this dynamic formation process. Four evolution stages are distinctively revealed, including an induction stage, a nucleation dominant stage, an early particle growth stage, and a late growth stage. The dynamic features at each evolution stages were discussed in terms of the dielectric characteristics of the system. It is strongly suggested that dielectric spectroscopy is an effective tool for the in situ mechanistic study of nanoparticle formation in microemulsion.