Nucleation and growth of gold nanoparticles initiated by nanosecond and femtosecond laser irradiation of aqueous [AuCl4]. Phys Chem Chem Phys 2018;20:28465-28475. [PMID: 30411753 PMCID: PMC6310131 DOI: 10.1039/c8cp05774e]

Colorimetric detection of neomycin sulfate in serum based on ultra-small gold nanoparticles with peroxidase-like activity

Neomycin sulfate (NEO) is a kind of aminoglycoside antibiotics. Because of its strong ototoxicity, nephrotoxicity and other side effects, its content in the body should be strictly monitored during use. In this paper, a rapid colorimetric detection method for NEO based on ultrasmall polyvinylpyrrolidone modified gold nanoparticles (PVP/Au NPs) with peroxidase-like activity was developed. Firstly, ultra small PVP/Au NPs with weak peroxidase-like activity were synthetized. When they were mixed with NEO, strong hydrogen bonds were formed between NEO and PVP, resulting in the aggregation of PVP/Au NPs, and the aggregated PVP/Au NPs showed stronger peroxidase-like activity. Therefore, rapid colorimetric detection of NEO was achieved by utilizing the enhanced peroxidase-like activity mechanism caused by the aggregation of ultra small PVP/Au NPs. The naked eye detection limit of this method is 50 nM. Within the range of 1 nM-300 nM, there was a good linear relationship between NEO concentration and the change in absorbance intensity of PVP/Au NPs-H2O2-TMB solution at 652 nm, with the regression curve of y = 0.0045x + 0.0525 (R2 = 0.998), and the detection limit is 1 nM. In addition, this method was successfully applied to the detection of NEO in mouse serum. The recoveries were 104.4 % -107.6 % compared with HPLC assay results, indicating that this method for NEO detection based on PVP/Au NPs has great potential in actual detection of NEO in serum.

Understanding Selectivity in Product Distributions from Laser Ablation of Organic Liquids

Pulsed laser ablation in organic solvents is widely used to produce oxide-free metal and metal carbide nanoparticles, often with carbon coatings resulting from laser-induced reactions in the organic solvent. To gain insight into how the molecular structure of the solvent affects these reaction pathways, this work investigates ablation of the C6H14 isomers n-hexane, 2-methylpentane, and 3-methylpentane through characterization of the gas and liquid products with mass spectrometry. Ablation of each C6H14 isomer produces a distinct distribution of product molecular weights and isomers. 2-methylpentane preferentially produces C3 and C9, whereas 3-methylpentane produces C2, C4, C8, and C10 products. These preferential product distributions, along with the lack of such selectivity in n-hexane, arise from differences in the most favorable C-C bond scission pathways in each C6H14 isomer. Moreover, the particular isomers of C8H18, C9H20, C10H22, and C12H26 produced by ablation of each C6H14 isomer indicate that the vast majority of reaction pathways involve addition reactions between a fragment radical and parent C6H14 or between two C6H14 molecules, without molecular rearrangement. This propensity toward direct addition suggests that the chemical reactions induced by ultrashort pulsed laser ablation proceed on faster time scales than those of radical rearrangements.

Dual-Function Femtosecond Laser: β-TCP Structuring and AgNP Synthesis via Photoreduction with Azorean Green Tea for Enhanced Osteointegration and Antibacterial Properties

β-Tricalcium phosphate (β-TCP) is a well-established biomaterial for bone regeneration, highly regarded for its biocompatibility and osteoconductivity. However, its clinical efficacy is often compromised by susceptibility to bacterial infections. In this study, we address this limitation by integrating femtosecond (fs)-laser processing with the concurrent synthesis of silver nanoparticles (AgNPs) mediated by Azorean green tea leaf extract (GTLE), which is known for its rich antioxidant and anti-inflammatory properties. The fs laser was employed to modify the surface of β-TCP scaffolds by varying scanning velocities, fluences, and patterns. The resulting patterns, formed at lower scanning velocities, display organized nanostructures, along with enhanced roughness and wettability, as characterized by Scanning Electron Microscopy (SEM), optical profilometry, and contact angle measurements. Concurrently, the femtosecond laser facilitated the photoreduction of silver ions in the presence of GTLE, enabling the efficient synthesis of small, spherical AgNPs, as confirmed by UV-vis spectroscopy, Transmission Electron Microscopy (TEM), and Fourier Transform Infrared Spectroscopy (FTIR). The resulting AgNP-embedded β-TCP scaffolds exhibited a significantly improved cell viability and elongation of human bone marrow mesenchymal stem cells (hBM-MSCs), alongside significant antibacterial activity against Staphylococcus aureus (S. aureus). This study underscores the transformative potential of combining femtosecond laser surface modification with GTLE-mediated AgNP synthesis, presenting a novel and effective strategy for enhancing the performance of β-TCP scaffolds in bone-tissue engineering.

Harnessing the power of gold: advancements in anticancer gold complexes and their functionalized nanoparticles

Cancer poses a formidable challenge, necessitating improved treatment strategies. Metal-based drugs and nanotechnology offer new hope in this battle. Versatile gold complexes and functionalized gold nanoparticles exhibit unique properties like biologically inert behaviour, outstanding light absorption, and heat-conversion abilities. These nanoparticles can be finely tuned for drug delivery, enabling precise and targeted cancer therapy. Their exceptional drug-loading capacity and low toxicity, stemming from excellent stability, biocompatibility, and customizable shapes, make them a promising option for enhancing cancer treatment outcomes and improving diagnostic imaging. Leveraging these attributes, researchers can design more effective and targeted cancer therapeutics. The potential of functionalized gold nanoparticles to advance cancer treatment and diagnostics holds a promising avenue for further exploration and development in the fight against cancer. This review article delves into the finely tuned attributes of functionalized gold nanoparticles, unveiling their potential for application in drug delivery for precise and targeted cancer therapy.

Enhancement of Metal Nanostructure Deposition on Silicon Laser-Induced Periodic Surface Structures by Galvanic Replacement

We report a chemically motivated, single-step method to enhance metal deposition onto silicon laser-induced periodic surface structures (LIPSSs) using reactive laser ablation in liquid (RLAL). Galvanic replacement (GR) reactions were used in conjunction with RLAL (GR-RLAL) to promote the deposition of Au and Cu nanostructures onto a Si LIPSS. To increase the deposition of Au, sacrificial metals Cu, Fe, and Zn were used; Fe and Zn also enhanced the deposition of Cu. We show that the deposited metal content, surface morphology, and metal crystallite size can be tuned based on the difference in electrochemical potentials of the deposited and sacrificial metal. Compared to the Au and Cu reference samples, GR more than doubled the metal content on the LIPSS and reduced metal crystallite sizes by up to 20%. The ability to tune the metal content and crystalline domain size simultaneously makes GR-RLAL a potentially useful approach in the manufacturing of functional metal-LIPSS materials such as surface-enhanced Raman spectroscopy substrates.

Real-Time Monitoring and Control of Nanoparticle Formation

Methods capable of controlling synthesis at the level of an individual nanoparticle are a key step toward improved reproducibility and scalability in engineering complex nanomaterials. To address this, we combine the spatially patterned activation of the photoreductant sodium pyruvate with interferometric scattering microscopy to achieve fast, label-free monitoring and control of hundreds of gold nanoparticles in real time. Individual particle growth kinetics are well-described by a two-step nucleation-autocatalysis model but with a distribution of individual rate constants that change with reaction conditions.

Femtosecond laser ablation in liquid synthesis of iron-oxidation nanoparticles with saturable absorption performance

"Naked" ferroferric-oxide nanoparticles (FONPs) synthesized by a femtosecond laser ablation on a bulk stainless steel in liquid were applied to the Nd: YVO₄ laser to achieve passive Q-switched pulse laser output. Without the pollution of ligand, the inherent light characteristic of "naked" FONPs was unaffected. The analysis of the morphological characteristics, dominant chemical elements, and phase composition of the FONPs showed that they were mainly composed of Fe₃O₄, which was spherical with an average diameter of 40 nm. The electron transition and orbital splitting of the iron element's octahedral center position under the laser-driven were considered the primary mechanisms of saturable absorption of Fe₃O₄ nanoparticles.

Polysaccharide-Based Composite Hydrogels as Sustainable Materials for Removal of Pollutants from Wastewater

Nowadays, pollution has become the main bottleneck towards sustainable technological development due to its detrimental implications in human and ecosystem health. Removal of pollutants from the surrounding environment is a hot research area worldwide; diverse technologies and materials are being continuously developed. To this end, bio-based composite hydrogels as sorbents have received extensive attention in recent years because of advantages such as high adsorptive capacity, controllable mechanical properties, cost effectiveness, and potential for upscaling in continuous flow installations. In this review, we aim to provide an up-to-date analysis of the literature on recent accomplishments in the design of polysaccharide-based composite hydrogels for removal of heavy metal ions, dyes, and oxyanions from wastewater. The correlation between the constituent polysaccharides (chitosan, cellulose, alginate, starch, pectin, pullulan, xanthan, salecan, etc.), engineered composition (presence of other organic and/or inorganic components), and sorption conditions on the removal performance of addressed pollutants will be carefully scrutinized. Particular attention will be paid to the sustainability aspects in the selected studies, particularly to composite selectivity and reusability, as well as to their use in fixed-bed columns and real wastewater applications.

Laser-Induced Morphological and Structural Changes of Cesium Lead Bromide Nanocrystals

Metal halide perovskite nanocrystals, an emerging class of materials for advanced photonic and optoelectronic applications, are mainly fabricated with colloidal chemistry routes. On the quest for new properties according to application needs, new perovskite systems of various morphologies and levels of doping and alloying have been developed, often also involving post-synthesis reactions. Recently, laser irradiation in liquids has been utilized as a fast method to synthesize or transform materials and interesting laser-induced transformations on nanocrystals were induced. These studies in general have been limited to small nanocrystals (~15 nm). In the case of halide perovskites, fragmentation or anion exchange have been observed in such laser-based processes, but no crystal structure transformations were actually observed or deliberately studied. Nanocrystals are more sensitive to light exposure compared to the corresponding bulk crystals. Additional factors, such as size, morphology, the presence of impurities, and others, can intricately affect the photon absorption and heat dissipation in nanocrystal suspensions during laser irradiation. All these factors can play an important role in the final morphologies and in the time required for these transformations to unfold. In the present work, we have employed a 513 nm femtosecond (fs) laser to induce different transformations in large nanocrystals, in which two phases coexist in the same particle (Cs4PbBr6/CsPbBr3 nanohexagons of ~100 nm), dispersed in dichlorobenzene. These transformations include: (i) the exfoliation of the primary nanohexagons and partial anion exchange; (ii) fragmentation in smaller nanocubes and partial anion exchange; (iii) side-by-side-oriented attachment, fusion, and formation of nanoplatelets and complete anion exchange; (iv) side-by-side attachment, fusion, and formation of nanosheets. Partial or complete Br-Cl anion exchange in the above transformations was triggered by the partial degradation of dichlorobenzene. In addition to the detailed analysis of the various nanocrystal morphologies observed in the various transformations, the structure-photoluminescence relationships for the different samples were analyzed and discussed.

Highly Heterogeneous Polarization and Solvation of Gold Nanoparticles in Aqueous Electrolytes

The performance of gold nanoparticles (NPs) in applications depends critically on the structure of the NP-solvent interface, at which the electrostatic surface polarization is one of the key characteristics that affects hydration, ionic adsorption, and electrochemical reactions. Here, we demonstrate significant effects of explicit metal polarizability on the solvation and electrostatic properties of bare gold NPs in aqueous electrolyte solutions of sodium salts of various anions (Cl^-, BF₄^-, PF₆^-, nitrophenolate, and 3- and 4-valent hexacyanoferrate), using classical molecular dynamics simulations with a polarizable core-shell model for the gold atoms. We find considerable spatial heterogeneity of the polarization and electrostatic potentials on the NP surface, mediated by a highly facet-dependent structuring of the interfacial water molecules. Moreover, ion-specific, facet-dependent ion adsorption leads to considerable alterations of the interfacial polarization. Compared to nonpolarizable NPs, surface polarization modifies water local dipole densities only slightly but has substantial effects on the electrostatic surface potentials and leads to significant lateral redistributions of ions on the NP surface. Besides, interfacial polarization effects cancel out in the far field for monovalent ions but not for polyvalent ions, as anticipated from continuum "image-charge" concepts. Far-field effective Debye-Hückel surface potentials change accordingly in a valence-specific fashion. Hence, the explicit charge response of metal NPs is crucial for the accurate description and interpretation of interfacial electrostatics (e.g., for charge transfer and interfacial polarization in catalysis and electrochemistry).

Pulsed Laser in Liquids Made Nanomaterials for Catalysis

Catalysis is essential to modern life and has a huge economic impact. The development of new catalysts critically depends on synthetic methods that enable the preparation of tailored nanomaterials. Pulsed laser in liquids synthesis can produce uniform, multicomponent, nonequilibrium nanomaterials with independently and precisely controlled properties, such as size, composition, morphology, defect density, and atomistic structure within the nanoparticle and at its surface. We cover the fundamentals, unique advantages, challenges, and experimental solutions of this powerful technique and review the state-of-the-art of laser-made electrocatalysts for water oxidation, oxygen reduction, hydrogen evolution, nitrogen reduction, carbon dioxide reduction, and organic oxidations, followed by laser-made nanomaterials for light-driven catalytic processes and heterogeneous catalysis of thermochemical processes. We also highlight laser-synthesized nanomaterials for which proposed catalytic applications exist. This review provides a practical guide to how the catalysis community can capitalize on pulsed laser in liquids synthesis to advance catalyst development, by leveraging the synergies of two fields of intensive research.

Plasmonic Gold Nanoparticles (AuNPs): Properties, Synthesis and their Advanced Energy, Environmental and Biomedical Applications

Inducing plasmonic characteristics, primarily localized surface plasmon resonance (LSPR), in conventional AuNPs through particle size and shape control could lead to a significant enhancement in electrical, electrochemical, and optical properties. Synthetic protocols and versatile fabrication methods play pivotal roles to produced plasmonic gold nanoparticles (AuNPs), which can be employed in multipurpose energy, environmental and biomedical applications. The main focus of this review is to provide a comprehensive and tutorial overview of various synthetic methods to design highly plasmonic AuNPs, along with a brief essay to understand the experimental procedure for each technique. The latter part of the review is dedicated to the most advanced and recent solar-induced energy, environmental and biomedical applications. The synthesis methods are compared to identify the best possible synthetic route, which can be adopted while employing plasmonic AuNPs for a specific application. The tutorial nature of the review would be helpful not only for expert researchers but also for novices in the field of nanomaterial synthesis and utilization of plasmonic nanomaterials in various industries and technologies.

Synthesis of Air-Stable Cu Nanoparticles Using Laser Reduction in Liquid

We report the synthesis of air-stable Cu nanoparticles (NPs) using the bottom-up laser reduction in liquid method. Precursor solutions of copper acetlyacetonate in a mixture of methanol and isopropyl alcohol were irradiated with femtosecond laser pulses to produce Cu NPs. The Cu NPs were left at ambient conditions and analyzed at different ages up to seven days. TEM analysis indicates a broad size distribution of spherical NPs surrounded by a carbon matrix, with the majority of the NPs less than 10 nm and small numbers of large particles up to ∼100 nm in diameter. XRD collected over seven days confirmed the presence of fcc-Cu NPs, with some amorphous Cu₂O, indicating the stability of the zero-valent Cu phase. Raman, FTIR, and XPS data for oxygen and carbon regions put together indicated the presence of a graphite oxide-like carbon matrix with oxygen functional groups that developed within the first 24 h after synthesis. The Cu NPs were highly active towards the model catalytic reaction of para-nitrophenol reduction in the presence of NaBH₄.

Design of Metal@Titanium Oxide Nano-heterodimers by Laser-Driven Photodeposition: Growth Mechanism and Modeling

In order to circumvent the usual nucleation of randomly distributed tiny metallic dots photodeposited on TiO₂ nanoparticles (NPs) induced by conventional UV lamps, we propose to synthesize well-controlled nanoheterodimers (NHDs) using lasers focused inside microfluidic reactors to strongly photoactivate redox reactions of active ions flowing along with nanoparticles in water solution. Since the flux of photons issued from a focused laser may be orders of magnitude higher than that reachable with classical lamps, the production of electron-hole pairs is tremendously increased, ensuring a large availability of carriers for the deposition and favoring the growth of a single metallic dot as compared to secondary nucleation events. We show that the growth of single silver or gold nanodots can be controlled by varying the beam intensity, the concentration of the metallic salt, and the flow velocity inside the microreactor. The confrontation to a build-in model of the metallic nanodot light-induced growth onto the surface of TiO₂ NPs shows the emergence of a predictable "master behavior" on which individual growths obtained from various tested conditions do collapse. We also characterized the associated quantum yield. Eventually, we successfully confronted our model to growth data from the literature in the case of silver on TiO₂ and gold on II-VI semiconducting NPs triggered by UV lamps. It shows that for the photosynthesis of NHDs the efficiency of the electron-hole pair production rate matters much more than the number of pairs produced and that the use of laser light can provide a photodeposition-based synthesis at the nanoscale.

Laser Superficial Fusion of Gold Nanoparticles with PEEK Polymer for Cardiovascular Application

This paper analyses the possibility of obtaining surface-infused nano gold particles with the polyether ether ketone (PEEK) using picosecond laser treatment. To fuse particles into polymer, the raw surface of PEEK was sputtered with 99.99% Au and micromachined by an A-355 laser device for gold particle size reduction. Biomimetic pattern and parameters optimization were key properties of the design for biomedical application. The structures were investigated by employing surface topography in the presence of micron and sub-micron features. The energy of the laser beam stating the presence of polymer bond thermalisation with remelting due to high temperature was also taken into the account. The process was suited to avoid intensive surface modification that could compromise the mechanical properties of fragile cardiovascular devices. The initial material analysis was conducted by power–depth dependence using confocal microscopy. The evaluation of gold particle size reduction was performed with scanning electron microscopy (SEM), secondary electron (SE) and quadrant backscatter electron detector (QBSD) and energy dispersive spectroscopy (EDS) analysis. The visibility of the constituted coating was checked by a commercial grade X-ray that is commonly used in hospitals. Attempts to reduce deposited gold coating to the size of Au nanoparticles (Au NPs) and to fuse them into the groove using a laser beam have been successfully completed. The relationship between the laser power and the characteristics of the particles remaining in the laser irradiation area has been established. A significant increase in quantity was achieved using laser power with a minimum power of 15 mW. The obtained results allowed for the continuation of the pilot study for augmented research and material properties analysis.

Effect of Pd Ions on the Generation of Ag and Au Heterogeneous Nanoparticles Using Laser Ablation in Liquid

Heterogeneous Ag/Au nanoparticles combined with Pd ions were generated by irradiating Ag/Au metal targets in a Pd solution with nanosecond and femtosecond lasers. AgPd and AuPd nanoparticles were generated by laser fragmentation and bonded. We numerically analyzed the hot spots with electromagnetic field enhancement of nanoparticles of different sizes separated by various distances. AgPd and AuPd nanoparticles differing in diameter were generated and showed different characteristics compared to typical core-shell heterogeneous nanoparticles. Pd ions played an important role in the generation of nanoparticles in liquid via laser ablation. The femtosecond laser produced both pure and heterogeneous nanoparticles of uniform size. The nanosecond laser produced pure nanoparticles with a relatively non-uniform size, which developed into spherical heterogeneous nanoparticles with a uniform (small) size in the presence of Pd ions. These nanoparticles could optimize applications such as photothermal therapy and catalysis.

Mechanism of Gold-Silver Alloy Nanoparticle Formation by Laser Coreduction of Gold and Silver Ions in Solution

Photochemical reduction of aqueous Ag⁺ and [AuCl₄]^- into alloy Au-Ag nanoparticles (Au-Ag NPs) with intense laser pulses is a green synthesis approach that requires no toxic chemical reducing agents or stabilizers; however size control without capping agents still remains a challenge. Hydrated electrons produced in the laser plasma can reduce both [AuCl₄]^- and Ag⁺ to form NPs, but hydroxyl radicals (OH·) in the plasma inhibit Ag NP formation by promoting the back-oxidation of Ag⁰ into Ag⁺. In this work, femtosecond laser reduction is used to synthesize Au-Ag NPs with controlled compositions by adding the OH· scavenger isopropyl alcohol (IPA) to precursor solutions containing KAuCl₄ and AgClO₄. With sufficient IPA concentration, varying the precursor ratio enabled control over the Au-Ag NP composition and produced alloy NPs with average sizes less than 10 nm and homogeneous molar compositions of Au and Ag. By investigating the kinetics of Ag⁺ and [AuCl₄]^- coreduction, we find that the reduction of [AuCl₄]^- into Au-Ag NPs occurs before most of the Ag⁺ is incorporated, giving us insight into the mechanism of Au-Ag NP formation.

Redispersion of cryoaggregated gold nanoparticle by means of laser irradiation and effect on biological interactions

Agglomeration/aggregation is an indispensable phenomenon observed by different nanoparticles. In the present study, commercial grade (50 nm) and chemically synthesized (40 nm) gold nanoparticles (AuNPs) were aggregated at sub-zero temperatures, followed by disruption of the AuNP aggregates via nanosecond laser-ablation and subsequent effect on biological interactions. AuNPs were characterized pre/post laser-ablation via UV-visible spectroscopy, transmission electron microscopy, atomic force microscopy, etc. The process of freezing (aggregation) and laser-ablation (dispersion) was performed multiple times, in order to compare the yield of nanoparticles after each cycle of laser-ablation. Further, AuNPs pre/post laser-ablation were assessed for cytotoxicity, protein-corona formation, and cell-uptake by in vitro studies using RAW264.7, Caco-2 and Neuro-2 a cell lines. Aggregates for both the types of AuNPs displayed fragmentation following first cycle of laser-ablation. In addition, AuNPs obtained after fragmentation of the aggregates showed reduction in diameter and reshaping, as compared to native AuNPs. The size and shape of the nanoparticles after second and third cycle of laser-ablation was same as that obtained after first cycle of ablation. Both laser-ablated and native AuNPs showed similar effects on viability of RAW 264.7 and Caco-2 cells, after 24 h and 48 h of exposure. Cell uptake of native and laser-ablated AuNPs was observed to be a size dependent phenomenon. Present findings showed that nanosecond laser ablation of cryoaggregated AuNPs lead to changes in the physical properties of AuNPs post ablation like size and shape, however, biological interaction with cells remained same. This work is first report on biological interactions of AuNPs generated via laser-ablation of cryoaggregated AuNPs.

Fabrication of Gold-Silicon Nanostructured Surfaces with Reactive Laser Ablation in Liquid

Laser processing is an emerging technique capable of synthesizing metal-silicon composite surfaces for various applications. However, little is known about the chemical composition of these laser-processed surfaces, and the reaction mechanisms leading to their formation are poorly understood. In this work, we report the formation of gold-silicon nanostructured surfaces through reactive laser ablation in liquid. Silicon wafers were immersed in pH-controlled solutions of KAuCl₄ and processed with ultrashort laser pulses. Gold deposition on the silicon wafers was found to depend on the pH of the precursor solution: neutral solutions (pH ∼6.3) resulted in much higher gold deposition than acidic or basic solutions. Laser processing of silicon wafers in water followed by immersion in the KAuCl₄ solution resulted in lower gold deposition. X-ray photoelectron spectroscopy and depth profiling showed the existence of both gold (Au⁰) and gold-silicide (Au_xSi) phases on the surfaces. Under both types of processing conditions, the gold atomic fraction and gold-silicide content increased with depth to at least 150 nm into the surface of the silicon wafer, although significantly more gold and gold-silicide were formed when the silicon was ablated in KAuCl₄ solution as compared to immersion in KAuCl₄ after ablation in water. Based on these data and existing literature on laser processing of silicon, we propose mechanisms that explain the observed gold penetration depth and its deposition dependence on solution pH. The mechanistic understanding gained in this work may be useful for synthesizing a variety of metal-silicon composite surfaces through laser processing to prepare functional materials such as catalysts and surface-enhanced Raman spectroscopy substrates.

Laser-assisted synthesis of gold-graphene oxide nanocomposites: effect of pulse duration

Laser photoreduction of metal ions onto graphene oxide (GO) is a facile, environmentally friendly method to produce functional metal-GO nanocomposites for a variety of applications. This work compares Au-GO nanocomposites prepared by photoreduction of [AuCl₄]^- in aqueous GO solution using laser pulses of nanosecond (ns) and femtosecond (fs) duration. The presence of GO significantly accelerates the [AuCl₄]^- photoreduction rate, with a more pronounced effect using ns laser pulses. This difference is rationalized in terms of the stronger interaction of the 532 nm laser wavelength and long pulse duration with the GO. Both the ns and fs lasers produce significant yields of sub-4 nm Au nanoparticles attached to GO, albeit with different size distributions: a broad 5.8 ± 1.9 nm distribution for the ns laser and two distinct distributions of 3.5 ± 0.8 and 10.1 ± 1.4 nm for the fs laser. Despite these differences, both Au-GO nanocomposites had the same high catalytic activity towards p-nitrophenol reduction as compared to unsupported 4-5 nm Au nanoparticles. These results point to the key role of GO photoexcitation in catalyzing metal ion reduction and indicate that both ns and fs lasers are suitable for producing functional metal-GO nanocomposites.

Green Synthesis of Oxide-Supported Pd Nanocatalysts by Laser Methods for Room-Temperature Carbon-Carbon Cross-Coupling Reactions

This work reports the design and development of a new class of highly active Pd nanocatalysts supported on substoichiometric oxides. These novel catalysts are generated by green laser synthesis methods to generate high-surface-area substoichiometric oxide nanoparticles followed by photoreduction in aqueous solutions to deposit highly active Pd nanocatalysts within the surface defects of the oxides. The laser methods eliminate the use of toxic chemicals, including hazardous solvents and chemical reducing agents, and allow efficient reduction of the Pd ions in aqueous solutions aided by the photogenerated electrons from the semiconductor support. The Pd catalysts incorporated within these oxides exhibit high activity for carbon-carbon bond-forming reactions. The Pd/TiO₂ catalyst with 0.3 mol % Pd achieves 100% conversion in the reaction between bromobenzene and benzeneboronic acid to the biphenyl product within 240 minutes at room temperature without any external heating. With a catalyst loading of 0.3 mol % Pd in the microwave-assisted reaction between bromobenzene and benzeneboronic acid at 60 °C, 92 and 83% conversions to the biphenyl product are achieved within 5 min of reaction time using the Pd/TiO₂ and Pd/ZnO catalysts, respectively. The results demonstrate a remarkable catalytic activity of the substoichiometric oxide-supported Pd catalysts with turnover frequencies (TOF, h^-1) of 24 000, 10 000, and 3200 achieved under mirowave-assisted reactions at 60 °C for the 0.03 mol% Pd of the Pd/TiO₂, Pd/ZnO, and Pd/ZrO₂ catalysts, respectively. The high activity and good reusability of these nanocatalysts are attributed to the optimum catalyst-support interaction between the small Pd nanoparticles and the surface defects of the substoichiometric oxide support prepared by the laser vaporization-controlled condensation method.

Photothermal structural modification of porous gold nanoshells via pulsed-laser irradiation: effects of laser wavelengths and surface conditions

We demonstrate the detailed effects of laser wavelengths and nanoparticle surface conditions, as well as laser fluences, in the structural modification of porous gold nanoshells induced by picosecond pulse irradiation.

Surface nanostructuring via femtosecond lasers

Periodical structures induced by pulsed lasers are a unique phenomenon when pulsed lasers irradiate on some material surfaces. These periodical structures with a subwavelength-scale period hold potential in integrated-optics and biomimetic micro-nanodevices for their direct shaping by laser pulses. However, the blurred nature of the laser-induced structuring hinders its further exploration in these application scopes. In this review, the plasmon-mediated structuring targeted on various materials, both organic and inorganic, will be discussed profoundly.

Formation of Copper(I) Oxide- and Copper(I) Cyanide-Polyacetonitrile Nanocomposites through Strong-Field Laser Processing of Acetonitrile Solutions of Copper(II) Acetate Dimer

Irradiation studies of acetonitrile solutions of copper(II) acetate dimer ([Cu(OAc)₂]₂) using high energy, simultaneously spatially and temporally focused (SSTF) ultrashort laser pulses are reported. Under ambient conditions, irradiation for relatively short periods of time (10-20 s) selectively produces relatively small, narrowly size-dispersed (3.5 ± 0.7 nm) copper(I) oxide nanoparticles (Cu₂O NPs) embedded in CuCN-polyacetonitrile polymers generated in situ by the laser. The Cu₂O NPs become embedded in a CuCN-polyacetonitrile network as they form, stabilizing them and protecting the air-sensitive material from oxygen. Laser irradiation of acetonitrile causes fragmentation into transient radicals that initiate and terminate polymerization of acetonitrile. Control and mechanistic investigations reveal that HCN formed during laser irradiation reacts rapidly to reduce the Cu(II) centers in [Cu(OAc)₂]₂, leading to the formation of CuCN or, in the presence of water, Cu₂O nanoparticles that bind and cross-link CuCN-polyacetonitrile chains. The acetate-bridged Cu(II) dimer unit is a required structural feature that functions to preorganize and direct the Cu(II) reduction and selective formation of CuCN and Cu₂O nanoparticles. This study illustrates how rapid deposition of energy using shaped, ultrashort laser pulses can initiate multiple photolytic and thermal processes that lead to the selective formation of composite nanoparticle/polymer materials for applications in electronics and catalysis.

Nucleation of Gold Nanoparticles in a Solution via Laser Hell: Simulation and Experiments

Theoretical and experimental results on the formation of gold nanoparticles under the influence of pulsed nanosecond laser irradiation of aqueous AuCl[Formula: see text] solution are presented. It is shown that high monodispersity of nanoparticles ensemble is related to the strong dependence of total absorbance of laser radiation on nanoparticles diameter and the conductive heat transfer to surrounding medium.

Gold Nanoparticles for Photothermal Cancer Therapy

Gold is a multifunctional material that has been utilized in medicinal applications for centuries because it has been recognized for its bacteriostatic, anticorrosive, and antioxidative properties. Modern medicine makes routine, conventional use of gold and has even developed more advanced applications by taking advantage of its ability to be manufactured at the nanoscale and functionalized because of the presence of thiol and amine groups, allowing for the conjugation of various functional groups such as targeted antibodies or drug products. It has been shown that colloidal gold exhibits localized plasmon surface resonance (LPSR), meaning that gold nanoparticles can absorb light at specific wavelengths, resulting in photoacoustic and photothermal properties, making them potentially useful for hyperthermic cancer treatments and medical imaging applications. Modifying gold nanoparticle shape and size can change their LPSR photochemical activities, thereby also altering their photothermal and photoacoustic properties, allowing for the utilization of different wavelengths of light, such as light in the near-infrared spectrum. By manufacturing gold in a nanoscale format, it is possible to passively distribute the material through the body, where it can localize in tumors (which are characterized by leaky blood vessels) and be safely excreted through the urinary system. In this paper, we give a quick review of the structure, applications, recent advancements, and potential future directions for the utilization of gold nanoparticles in cancer therapeutics.

The Effect of Gold Nanoparticle Concentration and Laser Fluence on the Laser-Induced Water Decomposition

This Article covers the influence of the concentration of gold nanoparticles on laser-induced water decomposition. It was established that addition of gold nanoparticles intensifies laser-induced water decomposition by almost 2 orders of magnitude. The water decomposition rate was shown to be maximal at a nanoparticle concentration around 10¹⁰ NP/mL, whereas a decrease or increase of nanoparticle concentration leads to a decrease of water decomposition rate. It was demonstrated that, if the concentration of nanoparticles in water-based colloid was less than 10¹⁰ NP/mL, laser irradiation of the colloid caused formation of molecular hydrogen, hydrogen peroxide, and molecular oxygen. If the concentration of nanoparticles exceeded 10¹¹ NP/mL, only two products, molecular hydrogen and hydrogen peroxide, were formed. Correlations between the water decomposition rate and the main optical and acoustic parameters of optical breakdown-generated plasma were investigated. Variants of laser-induced decomposition of colloidal solutions of nanoparticles based on organic solvents (ethanol, propanol-2, butanol-2, diethyl ether) were also analyzed.