Thin film photoelectrodes for solar water splitting

Enhancing Photoelectrochemical Water Oxidation on WO3 via Electrochromic Modulation: Universal Effects and Mechanistic Insights

Although WO3 exhibits both electrochromic and photoelectrochemical (PEC) properties, there is no research conducted to investigate the correlation between them. The study herein reports the electrochromic enhancement of PEC activity on WO3. The electrochromic WO3 (e-WO3) exhibits a significantly enhanced activity for PEC water oxidation compared to raw WO3 (r-WO3), with a limiting photocurrent density three times that of r-WO3. The electrochromic enhancement of PEC activity is universal and independent of the type of cations inserted during electrochromism. Decoloring reduces the PEC activity but a simple re-coloring restores the activity to its maximum value. Electrochromism induces large amounts of oxygen vacancies and surface states, the former improving the electron density of WO3 and the latter facilitating the hole transfer across e-WO3/electrolyte interface. It is proved that the electrochromic enhancement effect is due to the significantly improved electron-hole separation efficiency and the charge transfer efficiency across the WO3/electrolyte interface.

Particle-Based Photoelectrodes for PEC Water Splitting: Concepts and Perspectives

This comprehensive review delves into the intricacies of the photoelectrochemical (PEC) water splitting process, specifically focusing on the design, fabrication, and optimization of particle-based photoelectrodes for efficient green hydrogen production. These photoelectrodes, composed of semiconductor materials, potentially harness light energy and generate charge carriers, driving water oxidation and reduction reactions. The versatility of particle-based photoelectrodes as a platform for investigating and enhancing various semiconductor candidates is explored, particularly the emerging complex oxides with compelling charge transfer properties. However, the challenges presented by many factors influencing the performance and stability of these photoelectrodes, including particle size, shape, composition, morphology, surface modification, and electrode configuration, are highlighted. The review introduces the fundamental principles of semiconductor photoelectrodes for PEC water splitting, presents an exhaustive overview of different synthesis methods for semiconductor powders and their assembly into photoelectrodes, and discusses recent advances and challenges in photoelectrode material development. It concludes by offering promising strategies for improving photoelectrode performance and stability, such as the adoption of novel architectures and heterojunctions.

Engineering Ultrathin CuxS Layer on Planar Sb2S3 Photocathode to Enhance Photoelectrochemical Transformation

Sb2S3 has been extensively used as light absorber for photoelectrochemical cell. However, its p-type nature may result in the formation of Schottky junction with substrates, thus hindering the collection of photogenerated holes. Herein, an ultrathin CuxS layer is successfully engineered as the bottom junction for Sb2S3 for the first time. Capitalizing on its impressive electrical properties and superior optical properties, the CuxS layer exhibits a high work function of 4.90 eV, which causes the upward band bending of p-type Sb2S3, forming a hole-transparent structure with ohmic contact. The transparency of the ultrathin CuxS layer enables back-illumination of the Sb2S3/CuxS platform, facilitating the integration of intricate catalyst layers for photoelectrochemical transformation. When modified with Pt nanoparticles, the photocurrent density reaches -5.38 mA cm-2 at 0 V vs. RHE, marking a fourfold increase compared to the photocathode without CuxS layer. When introducing a molecular hybrid TC-CoPc@carbon black, a remarkable average photocurrent density of -0.44 mA cm-2 at the overpotential of 0 V is obtained for CO2 reduction reaction, while the photocurrent density is less than -0.03 mA cm-2 without CuxS.

Stability and degradation of (oxy)nitride photocatalysts for solar water splitting

Advancing towards alternative technologies for the sustainable production of hydrogen is a necessity for the successful integration of this potentially green fuel in the future. Photocatalytic and photoelectrochemical water splitting are promising concepts in this context. Over the past decades, researchers have successfully explored several materials classes, such as oxides, nitrides, and oxynitrides, in their quest for suitable photocatalysts with a focus on reaching higher efficiencies. However, to pave the way towards practicability, understanding degradation processes and reaching stability is essential, a domain where research has been scarcer. This perspective aims at providing an overview on recent progress concerning stability and degradation with a focus on (oxy)nitride photocatalysts and at providing insights into the opportunities and challenges coming along with the investigation of degradation processes and the attempts to improve the stability of photocatalysts.

Combined Effect of Underlayer and Deposition Solution to Optimize the Alignment of Hematite Photoanodes

This study investigates the optimization of hematite (α-Fe2O3) photoanodes for enhanced photoelectrochemical (PEC) performance and reproducibility, which are crucial for photocatalytic applications. Despite hematite's potential, hindered by inherent limitations, significant improvements were realized by introducing a titanium dioxide (TiO2) underlayer and ethanol-modified deposition. The influence of the deposition methods was understood by potential-dependent photoelectrochemical impedance spectroscopy analysis. The introduction of the TiO2 underlayer effectively increased the density of states, preferable for the electron transport in the bulk hematite, and the ethanol deposition on a TiO2 underlayer led to a stable surface state formation (S1 state) for the photoexcited hole transfer. This analysis illuminated the intricate interplay between electron transport in the bulk and photogenerated hole transfer at the solution interface, thereby facilitating smoother charge transfer. These findings underscore the viability of surface engineering and meticulous process optimization in addressing critical challenges in photocatalyst development.

Zirconium Oxynitride Thin Films for Photoelectrochemical Water Splitting

Transition metal oxynitrides are a promising class of functional materials for photoelectrochemical (PEC) applications. Although these compounds are most commonly synthesized via ammonolysis of oxide precursors, such synthetic routes often lead to poorly controlled oxygen-to-nitrogen anion ratios, and the harsh nitridation conditions are incompatible with many substrates, including transparent conductive oxides. Here, we report direct reactive sputter deposition of a family of zirconium oxynitride thin films and the comprehensive characterization of their tunable structural, optical, and functional PEC properties. Systematic increases of the oxygen content in the reactive sputter gas mixture enable access to different crystalline structures within the zirconium oxynitride family. Increasing oxygen contents lead to a transition from metallic to semiconducting to insulating phases. In particular, crystalline Zr2ON2-like films have band gaps in the UV-visible range and are n-type semiconductors. These properties, together with a valence band maximum position located favorably relative to the water oxidation potential, make them viable photoanode candidates. Using chopped linear sweep voltammetry, we indeed confirm that our Zr2ON2 films are PEC-active for the oxygen evolution reaction in alkaline electrolytes. We further show that high-vacuum annealing boosts their PEC performance characteristics. Although the observed photocurrents are low compared to state-of-the-art photoanodes, these dense and planar thin films can offer a valuable platform for studying oxynitride photoelectrodes, as well as for future nanostructuring, band gap engineering, and defect engineering efforts.

Electrocatalytic water oxidation with manganese phosphates

As inspired by the Mn4CaO5 oxygen evolution center in nature, Mn-based electrocatalysts have received overwhelming attention for water oxidation. However, the understanding of the detailed reaction mechanism has been a long-standing problem. Herein, homologous KMnPO4 and KMnPO4•H2O with 4-coordinated and 6-coordinated Mn centers, respectively, are prepared. The two catalysts constitute an ideal platform to study the structure-performance correlation. The presence of Mn(III), Mn(IV), and Mn(V) intermediate species are identified during water oxidation. The Mn(V)=O species is demonstrated to be the substance for O-O bond formation. In KMnPO4•H2O, the Mn coordination structure did not change significantly during water oxidation. In KMnPO4, the Mn coordination structure changed from 4-coordinated [MnO4] to 5-coordinated [MnO5] motif, which displays a triangular biconical configuration. The structure flexibility of [MnO5] is thermodynamically favored in retaining Mn(III)-OH and generating Mn(V)=O. The Mn(V)=O species is at equilibrium with Mn(IV)=O, the concentration of which determines the intrinsic activity of water oxidation. This study provides a clear picture of water oxidation mechanism on Mn-based systems.

Coherent X-ray Spectroscopy Elucidates Nanoscale Dynamics of Plasma-Enhanced Thin-Film Growth

Sophisticated thin film growth techniques increasingly rely on the addition of a plasma component to open or widen a processing window, particularly at low temperatures. Taking advantage of continued increases in accelerator-based X-ray source brilliance, this real-time study uses X-ray Photon Correlation Spectroscopy (XPCS) to elucidate the nanoscale surface dynamics during Plasma-Enhanced Atomic Layer Deposition (PE-ALD) of an epitaxial indium nitride film. Ultrathin films are synthesized from repeated cycles of alternating self-limited surface reactions induced by temporally separated pulses of the material precursor and plasma reactant, allowing the influence of each on the evolving morphology to be examined. During the heteroepitaxial 3D growth examined here, sudden changes in the surface structure during initial film growth, consistent with numerous overlapping stress-relief events, are observed. When the film becomes continuous, the nanoscale surface morphology abruptly becomes long-lived with a correlation time spanning the period of the experiment. Throughout the growth experiment, there is a consistent repeating pattern of correlations associated with the cyclic growth process, which is modeled as transitions between different surface states. The plasma exposure does not simply freeze in a structure that is then built upon in subsequent cycles, but rather, there is considerable surface evolution during all phases of the growth cycle.

Enhanced Carrier Dynamics of CsPbBr3 Nanocrystals Enabled by Short-Ligand Ethanedithiol for Efficient Photoelectrocatalytic Photoanodes

Photoelectrochemical (PEC) water splitting is a potential solution for a low-carbon society and clean energy storage due to its ability to produce hydrogen and oxygen. However, the slow oxidation half-reaction of the process has limited its overall efficacy, necessitating the development of an efficient photoanode. Colloidal CsPbBr3 nanocrystals (NCs) have been identified as promising candidates due to their high light absorption and valence band position. However, the presence of the electrical insulator, long-chain oleate molecules, on the surface of the CsPbBr3 NCs has hindered efficient charge carrier separation and transport. To solve this problem, short-chain 1,2-ethanedithiol (EDT) ligands were used to replace the oleate ligands on the surface of the CsPbBr3 NCs through a solid-state ligand exchange method. This resulted in a reduction of the nanocrystal spacing and a cross-linking reaction, which improved the photogenerated carrier separation and transport while still passivating the dangling bonds on the CsPbBr3 NC surface. Ultimately, this led to a remarkable photocurrent density of 3.34 mA cm-2 (1.23 VRHE), which was 5.2 times higher than that of the pristine oleate-CsPbBr3 NC (0.64 mA cm-2)-based device. This work presents an efficient way of developing inorganic lead halide perovskite colloidal nanocrystal-based photoanodes through surface ligand engineering.

Perovskite-Solar-Cell-Powered Integrated Fuel Conversion and Energy-Storage Devices

Metal halide hybrid perovskite solar cells (PSCs) have received considerable attention over the past decade owing to their potential for low-cost, solution-processable, earth-abundant, and high-performance superiority, increasing power conversion efficiencies of up to 25.7%. Solar energy conversion into electricity is highly efficient and sustainable, but direct utilization, storage, and poor energy diversity are difficult to achieve, resulting in a potential waste of resources. Considering its convenience and feasibility, converting solar energy into chemical fuels is regarded as a promising pathway for boosting energy diversity and expanding its utilization. In addition, the energy conversion-storage integrated system can efficiently sequentially capture, convert, and store energy in electrochemical energy storage devices. However, a comprehensive overview focusing on PSC-self-driven integrated devices with a discussion of their development and limitations remains lacking. Here, focus is on the development of representative configurations of emerging PSC-based photo-electrochemical devices including self-charging power packs, unassisted solar water splitting/CO2 reduction. The advanced progresses in this field, including configuration design, key parameters, working principles, integration strategies, electrode materials, and their performance evaluations are also summarized. Finally, scientific challenges and future perspectives for ongoing research in this field are presented.

Quantitative Determination the Role of the Intrabandgap States in Water Photooxidation over Hematite Electrodes

The intrabandgap states on the hematite (α-Fe2O3) electrodes are believed to play an important role in water photooxidation. Yet, it is not fully understood how the intrabandgap states are involved in the reaction. In this work, the intraband-gap states in water photooxidation on α-Fe2O3 electrodes are investigated by a combination of multiple (photo-) electrochemical techniques and operando spectroscopic methods. Two kinds of surface states are observed on the electrodes during water photooxidation, and their roles are quantitatively determined by the correlation with the steady-state photocurrent. It is demonstrated that the intrinsic electronic surface state close to the conduction band can act only as the recombination center for the photocarriers. However, the photogenerated surface state closer to the valence band is revealed to be the reactant in the rate-determining step in oxygen evolution reaction. These findings may be beneficial to elucidate the actual function of the surface states and provide insights into the kinetic and mechanism studies of water photooxidation on the α-Fe2O3 electrodes.

Insight into the Key Restriction of BiVO4 Photoanodes Prepared by Pyrolysis Method for Scalable Preparation

Bismuth Vanadate (BiVO4 ) photoanode has been popularly investigated for promising solar water oxidation, but its intrinsic performance has been greatly retarded by the direct pyrolysis method. Here we insight the key restriction of BiVO4 prepared by metal-organic decomposition (MOD) method. It is found that the evaporation of vanadium during the pyrolysis tends to cause a substantial phase impurity, and the unexpected few tetragonal phase inhibits the charge separation evidently. Consequently, suitably excessive vanadium precursor was adopted to eliminate the phase impurity, based on which the obtained intrinsic BiVO4 photoanode could exhibit photocurrent density of 4.2 mA cm-2 at 1.23 VRHE under AM 1.5 G irradiation, as comparable to the one fabricated by the currently popular two-step electrodeposition method. Furthermore, the excellent performance can be maintained on the enlarged photoanode (25 cm2 ), demonstrating the advantage of MOD method in scalable preparation. Our work provides new insight and highlights the glorious future of MOD method for the design of scale-up efficient BiVO4 photoanode.

Operando IR Optical Control of Localized Charge Carriers in BiVO4 Photoanodes

In photoelectrochemical cells (PECs) the photon-to-current conversion efficiency is often governed by carrier transport. Most metal oxides used in PECs exhibit thermally activated transport due to charge localization via the formation of polarons or the interaction with defects. This impacts catalysis by restricting the charge accumulation and extraction. To overcome this transport bottleneck nanostructuring, selective doping and photothermal treatments have been employed. Here we demonstrate an alternative approach capable of directly activating localized carriers in bismuth vanadate (BiVO4). We show that IR photons can optically excite localized charges, modulate their kinetics, and enhance the PEC current. Moreover, we track carriers bound to oxygen vacancies and expose their ∼10 ns charge localization, followed by ∼60 μs transport-assisted trapping. Critically, we demonstrate that localization is strongly dependent on the electric field within the device. While optical modulation has still a limited impact on overall PEC performance, we argue it offers a path to control devices on demand and uncover defect-related photophysics.

Oxynitrides enabled photoelectrochemical water splitting with over 3,000 hrs stable operation in practical two-electrode configuration

Solar photoelectrochemical reactions have been considered one of the most promising paths for sustainable energy production. To date, however, there has been no demonstration of semiconductor photoelectrodes with long-term stable operation in a two-electrode configuration, which is required for any practical application. Herein, we demonstrate the stable operation of a photocathode comprising Si and GaN, the two most produced semiconductors in the world, for 3,000 hrs without any performance degradation in two-electrode configurations. Measurements in both three- and two-electrode configurations suggest that surfaces of the GaN nanowires on Si photocathode transform in situ into Ga-O-N that drastically enhances hydrogen evolution and remains stable for 3,000 hrs. First principles calculations further revealed that the in-situ Ga-O-N species exhibit atomic-scale surface metallization. This study overcomes the conventional dilemma between efficiency and stability imposed by extrinsic cocatalysts, offering a path for practical application of photoelectrochemical devices and systems for clean energy.

Excitation-Wavelength-Dependent Charge-Carrier Lifetime in Hematite: An Insight from Nonadiabatic Molecular Dynamics

Experiments have reported that the photoexcited carrier lifetime in α-Fe₂O₃ has a significant excitation-wavelength dependence but leave the physical mechanism unresolved. In this work, we rationalize the puzzling excitation-wavelength dependence of the photoexcited carrier dynamics in Fe₂O₃ by performing nonadiabatic molecular dynamics simulation based on the strongly constrained and appropriately normed functional, which accurately describes the electronic structure of Fe₂O₃. Photogenerated electrons with lower-energy excitation relax fast in the t_2g conduction band within about 100 fs, while the photogenerated electrons with higher-energy excitation undergo first a slower interband relaxation from the e_g lower state to the t_2g upper state on a time scale of 135 ps, followed by the much faster t_2g intraband relaxation. This study provides insight into the experimentally reported excitation-wavelength dependence of the carrier lifetime in Fe₂O₃ and a reference for regulating photogenerated carrier dynamics in transition-metal oxides through the light excitation wavelength.

A Conformal Carbon Nanolayer Coated Fe2 O3 Cocatalyst for the Promoted Activity of Plasma-Sputtered BiVO4 Photoanode

To simultaneously improve the hole extraction ability of the BiVO₄ photoanode and accelerate the surface reaction kinetics, herein, a carbon nanolayer conformally coated Fe₂ O₃ (C-Fe₂ O₃ ) as oxygen evolution catalyst (OEC) is loaded on the H₂ plasma treated nanoporous BiVO₄ (BVO(H₂ )) surface by a hydrothermal reaction. It is found that the H₂ plasma induced vacancies in BVO remarkably increases the conductivity, and the C-Fe₂ O₃ enables hole extraction from the bulk to the surface as well as efficient hole injection to the electrolyte. As a result, the C-Fe₂ O₃ /BVO(H₂ ) photoanode achieves a photocurrent density of 4.4 mA/cm² at 1.23 V vs. reversible hydrogen electrode (RHE) and an ABPE value of 1.5 % at 0.68 V vs. RHE, which are 4.8-fold and 13-fold higher than that of BVO photoanode, respectively.

Mesoporous CuFe2 O4 Photoanodes for Solar Water Oxidation: Impact of Surface Morphology on the Photoelectrochemical Properties

Metal oxide-based photoelectrodes for solar water splitting often utilize nanostructures to increase the solid-liquid interface area. This reduces charge transport distances and increases the photocurrent for materials with short minority charge carrier diffusion lengths. While the merits of nanostructuring are well established, the effect of surface order on the photocurrent and carrier recombination has not yet received much attention in the literature. To evaluate the impact of pore ordering on the photoelectrochemical properties, mesoporous CuFe₂ O₄ (CFO) thin film photoanodes were prepared by dip-coating and soft-templating. Here, the pore order and geometry can be controlled by addition of copolymer surfactants poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (Pluronic® F-127), polyisobutylene-block-poly(ethylene oxide) (PIB-PEO) and poly(ethylene-co-butylene)-block-poly(ethylene oxide) (Kraton liquid™-PEO, KLE). The non-ordered CFO showed the highest photocurrent density of 0.2 mA/cm² at 1.3 V vs. RHE for sulfite oxidation, but the least photocurrent density for water oxidation. Conversely, the ordered CFO presented the best photoelectrochemical water oxidation performance. These differences can be understood on the basis of the high surface area, which promotes hole transfer to sulfite (a fast hole acceptor), but retards oxidation of water (a slow hole acceptor) due to electron-hole recombination at the defective surface. This interpretation is confirmed by intensity-modulated photocurrent (IMPS) and vibrating Kelvin probe surface photovoltage spectroscopy (VKP-SPS). The lowest surface recombination rate was observed for the ordered KLE-based mesoporous CFO, which retains spherical pore shapes at the surface resulting in fewer surface defects. Overall, this work shows that the photoelectrochemical energy conversion efficiency of copper ferrite thin films is not just controlled by the surface area, but also by surface order.

Characterizing Density and Spatial Distribution of Trap States in Ta3N5 Thin Films for Rational Defect Passivation

Tantalum nitride (Ta₃N₅) has gained significant attention as a potential photoanode material, yet it has been challenged by material quality issues. Defect-induced trap states are detrimental to the performance of any semiconductor material. Beyond influencing the performance of Ta₃N₅ films, defects can also accelerate the degradation in water during desired electrochemical applications. Defect passivation has provided an enormous boost to the development of many semiconductor materials but is currently in its infancy for Ta₃N₅. This is in part due to a lack of experimental understanding regarding the spatial and energetic distribution of trap states throughout Ta₃N₅ thin films. Here, we employ drive-level capacitance profiling (DLCP) to experimentally resolve the spatial and energetic distribution of trap states throughout Ta₃N₅ thin films. The density of deeper energetic traps is found to reach ∼2.5 to 6 × 10²² cm^-3 at the interfaces of neat Ta₃N₅ thin films, over an order of magnitude greater than the bulk. In addition to the spatial profile of deep trap states, we report neat Ta₃N₅ thin films to be highly n-type in nature, owning a free carrier density of ∼9.74 × 10¹⁷ cm^-3. This information, coupled with the present understanding of native oxide layers on Ta₃N₅, has facilitated the rational design of a targeted passivation strategy that simultaneously provides a means for catalyst immobilization. Loading catalyst via silatrane moieties suppresses the density of defects at the surface of Ta₃N₅ thin films by two orders of magnitude, while also reducing the free carrier density of films by over one order of magnitude, effectively dedoping the films to ∼2.40 × 10¹⁶ cm^-3. The surface passivation of Ta₃N₅ films translates to suppressed defect-induced trapping and recombination of photoexcited carriers, as determined through absorption, photoluminescence, and transient photovoltage. This illustrates how developing a deeper understanding of the distribution and influence of defects in Ta₃N₅ thin films has the potential to guide future works and ultimately accelerate the integration and development of high-performance Ta₃N₅ thin film devices.

Expediting hole transfer via surface states in hematite-based composite photoanodes

Regarding the indirect hole transfer route in hematite-based photoelectrodes, the widely accepted viewpoint is that the Fe^IVO states act as a hole transfer medium, while other types of surface states act as recombination centers. Alternatively, it has rarely been reported that the recombining surface states may contribute to the charge transport in modified photoelectrodes. In this study, we employed CoCr layered double hydroxide (LDH)/Fe₂O₃ and CoCr LDH/Zr:Fe₂O₃ as research models to investigate the distinct charge transfer pathways in composite photoanodes. Different from the adverse role of surface states at ∼0.7 V versus the reversible hydrogen electrode (r-SS) in the bare hematite photoelectrodes (Fe₂O₃ or Zr:Fe₂O₃), the r-SS in the composite photoanodes (CoCr LDH/Fe₂O₃ or CoCr LDH/Zr:Fe₂O₃) served as a hole transfer station to induce high-valent Co cations, and the position of r-SS determined the onset potential of the composite photoelectrodes. Moreover, the Fe^IVO states still acted as active intermediates to transport numerous holes to the cocatalyst, which enhanced the charge utilization efficiency at 1.23 V versus the reversible hydrogen electrode (RHE) to a large extent. Besides, a noteworthy fact is that Zr doping increased the number of active Fe^IVO states, which significantly contributed to the enhancement in current density. However, it led to a delayed onset potential because of the positively shifted surface states (r-SS and Fe^IVO). Evidently, the different surface state distributions between Fe₂O₃ and Zr:Fe₂O₃ gave rise to anisotropic charge transfer and recombination behavior in the composite photoanodes. This study gives extensive insight into the hole transfer route in composite photoanodes and reveals the surface state-tuning effects of dopants and cocatalysts, which are significant for a deep understanding of the surface states and optimal design of composite photoanodes via surface state modulation.

In situ Cu single atoms anchoring on MOF-derived porous TiO2 for the efficient separation of photon-generated carriers and photocatalytic H2 evolution

Single atom catalysts (SACs) have an extremely high atom utilization and distinctive structures and properties in the field of photocatalysis. However, the premise of conducting scientific research and applications is still the stability and catalytic activity of single atoms on suitable substrates. Metal organic frameworks (MOFs), as one of the most suitable single-atom substrates, have tunable internal structures, unsaturated coordination bonds, and high specific surface areas. In this work, Ti-based MOF, MIL-125, was adopted as the precursor to prepare mesoporous Cu-loaded TiO₂. During the synthesis of MIL-125, a Cu source was added, and Cu atoms were fixed by partly replacing Ti atoms in the Ti-O octahedron to coordinate with O atoms, resulting in a good dispersity, good stability and high loading amount. Experimental investigations demonstrated that dispersed Cu single atoms act as reaction centres, besides being able to accelerate the transfer of photoelectrons. Under simulated sunlight, the H₂ evolution rate of the optimum Cu-TiO₂ sample reaches 17.77 mmol g^-1 h^-1, nearly 101 times higher than that of the pure mesoporous TiO₂. The apparent quantum efficiency (AQE) is 20.15% under 365 nm irradiation. This research opens a new thinking to preparing high stability and high activity single atom photocatalysts.

Charge Transfer Doping of Carbon Nitride Films through Noncovalent Iodination for Enhanced Photoelectrochemical Performance: Combined Experimental and Computational Insights

To improve the photoelectrochemical (PEC) performance of photocatalysts, the doping strategy through covalent functionalization is often adopted to adjust material electronic structures. By contrast, this work demonstrates that the noncovalent interaction in the case of iodinated graphitic carbon nitride (g-CN) film can also enhance the PEC performance. Through a facile synthesis method of rapid thermal vapor condensation (RTVC), the prepared iodinated g-CN film shows a significantly improved photocurrent density (38.9 µA cm^-2 ), three times that of pure g-CN film (13.0 µA cm^-2 ) at 1.23 V versus reversible hydrogen electrode. Computations reveal that the noncovalent attachment of iodine anion (I^- ) on g-CN plays a crucial role in modulating the bandgap states and broadening of the visible-light absorption range as well as the charge carrier separation with the photo-induced hole confined to I^- and electron to g-CN film. The fully filled valence orbitals (4d¹⁰ 5s² 5p⁶ ) of I^- determine its noncovalent attachment on the g-CN film and so do the iodine species of I₃ ^- , I₅ ^- , etc. This work offers a favorable synthesis method to achieve efficient doping through noncovalent charge transfer between thin film and certain dopants and provides a useful modification strategy for the establishment of multi-channel transportation of charge carriers in general photocatalysts.

Molecular-Modified Photocathodes for Applications in Artificial Photosynthesis and Solar-to-Fuel Technologies

Nature offers inspiration for developing technologies that integrate the capture, conversion, and storage of solar energy. In this review article, we highlight principles of natural photosynthesis and artificial photosynthesis, drawing comparisons between solar energy transduction in biology and emerging solar-to-fuel technologies. Key features of the biological approach include use of earth-abundant elements and molecular interfaces for driving photoinduced charge separation reactions that power chemical transformations at global scales. For the artificial systems described in this review, emphasis is placed on advancements involving hybrid photocathodes that power fuel-forming reactions using molecular catalysts interfaced with visible-light-absorbing semiconductors.

Coordination Chemistry Engineered Polymeric Carbon Nitride Photoanode with Ultralow Onset Potential for Water Splitting

Construction of an intimate film/substrate interface is of great importance for a photoelectrode to achieve efficient photoelectrochemical performance. Inspired by coordination chemistry, a polymeric carbon nitride (PCN) film is intimately grown on a Ti-coated substrate by an in situ thermal condensation process. The as-prepared PCN photoanode exhibits a record low onset potential (Eonset ) of -0.38 V versus the reversible hydrogen electrode (RHE) and a decent photocurrent density of 242 μA cm-2 at 1.23 VRHE for water splitting. Detailed characterization confirms that the origin of the ultralow onset potential is mainly attributed to the substantially reduced interfacial resistance between the Ti-coated substrate and the PCN film benefitting from the constructed interfacial sp2 N→Ti coordination bonds. For the first time, the ultralow onset potential enables the PCN photoanode to drive water splitting without external bias with a stable photocurrent density of ≈9 μA cm-2 up to 1 hour.

Integrated Photovoltaic Charging and Energy Storage Systems: Mechanism, Optimization, and Future

As an emerging solar energy utilization technology, solar redox batteries (SPRBs) combine the superior advantages of photoelectrochemical (PEC) devices and redox batteries and are considered as alternative candidates for large-scale solar energy capture, conversion, and storage. In this review, a systematic summary from three aspects, including: dye sensitizers, PEC properties, and photoelectronic integrated systems, based on the characteristics of rechargeable batteries and the advantages of photovoltaic technology, is presented. The matching problem of high-performance dye sensitizers, strategies to improve the performance of photoelectrode PEC, and the working mechanism and structure design of multienergy photoelectronic integrated devices are mainly introduced and analyzed. In particular, the devices and improvement strategies of high-performance electrode materials are analyzed from the perspective of different photoelectronic integrated devices (liquid-based and solid-state-based). Finally, future perspectives are provided for further improving the performance of SPRBs. This work will open up new prospects for the development of high-efficiency photoelectronic integrated batteries.

The Influence of Magnetic Field and Nanoparticle Concentration on the Thin Film Colloidal Deposition Process of Magnetic Nanoparticles: The Search for High-Efficiency Hematite Photoanodes

Hematite is considered a promising photoanode material for photoelectrochemical water splitting, and the literature has shown that the photoanode production process has an impact on the final efficiency of hydrogen generation. Among the methods used to process hematite photoanode, we can highlight the thin films from the colloidal deposition process of magnetic nanoparticles. This technique leads to the production of high-performance hematite photoanode. However, little is known about the influence of the magnetic field and heat treatment parameters on the final properties of hematite photoanodes. Here, we will evaluate those processing parameters in the morphology and photoelectrochemical properties of nanostructured hematite anodes. The analysis of thickness demonstrated a relationship between the magnetic field and nanoparticles concentration utilized to prepare the thin films, showing that the higher magnetic fields decrease the thickness. The J_abs results corroborate to influence the magnetic field since the use of a higher magnetic field decreases the deposited material amount, consequently decreasing the absorption of the thin films. The PEC measurements showed that at higher concentrations, the use of higher magnetic fields increases the J_PH values, and lower magnetic fields cause a decrease in J_PH when using the higher nanoparticle concentrations.

Differentiating Defects and Their Influence on Hematite Photoanodes Using X-ray Absorption Spectroscopy and Raman Microscopy

A high degree of variability in behavior and performance of hematite as photoanodes for the oxygen evolution reaction signifies a need to improve our understanding of the interplay between defects and photoelectrochemical performance. We approach this problem by applying structure-property analysis to a series of hematite samples synthesized under either O₂ or N₂ environments such that they exhibit highly variable performance for photoelectrocatalytic oxygen evolution. X-ray absorption fine-structure spectroscopy and Raman spectroscopy provide parameters describing the structure of samples across the series. Systematic comparisons of these parameters to those describing photoelectrochemical performance reveal different defects in samples prepared under N₂ or O₂. Distinct correlations between both the iron oxidation state and charge carrier density with photoelectrocatalytic performance lead to assignment of the primary defects as oxygen vacancies (N₂) and iron vacancies (O₂). Differences in the structural distortions caused by these defects are seen in correlations between short-range structural parameters and photoelectrochemical behavior. These distortions are readily observed by Raman spectroscopy, suggesting that it may be possible to calibrate the width, energy, and intensity of peaks in Raman spectra to enable direct analysis of defects in hematite photoanodes.

Adopting Back Reduction Current as an Additional Output Signal for Achieving Photoelectrochemical Differentiated Detection

Photoelectrochemical (PEC) sensors are usually based on a single output signal, that is, the photocurrent change caused by the (photoelectro)chemical reaction between target analytes and photoelectrodes. However, the photocurrent may be influenced by redox species other than the target analyte; therefore, modifying the surface of photoelectrodes with probes that selectively bind to the analyte is essential. Moreover, even though various surface modification methods have been developed, distinguishing molecularly similar chemicals using PEC sensing systems remains a significant challenge. To address these selectivity issues, we proposed a photoanode-based PEC sensor that utilizes a cathodic transient current as a second output signal in addition to the photocurrent, which arises from the back reduction of photo-oxidized species. Factors influencing the back reduction were investigated by observing the transient photocurrent of hematite photoanodes in the presence of model redox probes. The chemical environment around the electrode-electrolyte interface was manipulated by altering the electrolyte composition or modifying the electrode surface. The favorable interaction between the electrode surface and redox species led to an increase in the extent of back reduction and the cathodic transient current. In addition, the extent of back reduction also depends on the chemical identity of the redox species, such as the kinetics of subsequent chemical reactions. Therefore, the synergistic combination of the photocurrent and the cathodic transient current enabled the differentiated detection of various catecholamine neurotransmitters with a single pristine photoelectrode, which has never been achieved using traditional PEC methods. Revisiting the transient photocurrent can complement conventional PEC applications and offers possibilities for more effective semiconductor-based applications.

Turning off the “shunt channel” by coating with CoFe layered double hydroxide nanocrystals for efficient photoelectrocatalytic water splitting

Tiny and crystalline CoFe(C) nanoparticles can close the “shunt channel” between the cocatalyst and the substrate, and the recombination of photogenerated charge caused by back-reaction is inhibited.

Advancing Photoelectrochemical Energy Conversion through Atomic Design of Catalysts

Powered by inexhaustible solar energy, photoelectrochemical (PEC) hydrogen/ammonia production and reduction of carbon dioxide to high added-value chemicals in eco-friendly and mild conditions provide a highly attractive solution to carbon neutrality. Recently, substantial advances have been achieved in PEC systems by improving light absorption and charge separation/transfer in PEC devices. However, less attention is given to the atomic design of photoelectrocatalysts to facilitate the final catalytic reactions occurring at photoelectrode surface, which largely limits the overall photo-to-energy conversion of PEC system. Fundamental catalytic mechanisms and recent progress in atomic design of PEC materials are comprehensively reviewed by engineering of defect, dopant, facet, strain, and single atom to enhance the activity and selectivity. Finally, the emerging challenges and research directions in design of PEC systems for future photo-to-energy conversions are proposed.

Ultrathin black phosphorus as pivotal hole extraction layer and oxidation evolution co-catalyst boosting solar water oxidation

Inefficient minority carrier extraction and sluggish oxygen evolution reaction (OER) kinetics are two principal contradictions restricting photoelectrochemical water oxidation. Here, the aforementioned restrictions could be simultaneously alleviated by coupling ultrathin...

Vacancy defect engineering of BiVO4 photoanodes for photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting has been regarded as a promising technology for sustainable hydrogen production. The development of efficient photoelectrode materials is the key to improve the solar-to-hydrogen (STH) conversion efficiency towards practical application. Bismuth vanadate (BiVO₄) is one of the most promising photoanode materials with the advantages of visible light absorption, good chemical stability, nontoxic feature, and low cost. However, the PEC performance of BiVO₄ photoanodes is limited by the relatively short hole diffusion length and poor electron transport properties. The recent rapid development of vacancy defect engineering has significantly improved the PEC performance of BiVO₄. In this review article, the fundamental properties of BiVO₄ are presented, followed by an overview of the methods for creating different kinds of vacancy defects in BiVO₄ photoanodes. Then, the roles of vacancy defects in tuning the electronic structure, promoting charge separation, and increasing surface photoreaction kinetics of BiVO₄ photoanodes are critically discussed. Finally, the major challenges and some encouraging perspectives for future research on vacancy defect engineering of BiVO₄ photoanodes are presented, providing guidelines for the design of efficient BiVO₄ photoanodes for solar fuel production.

Decoration of BiVO4 Photoanodes with Near-Infrared Quantum Dots for Boosted Photoelectrochemical Water Oxidation

Broadening light absorption and improving charge carrier separation are very critical to boost the water splitting efficiency in photoelectrochemical (PEC) systems. We herein reported a heterostructured photoanode consisting of BiVO₄ and eco-friendly, near-infrared (NIR) CuInSeS@ZnS core-shell quantum dots (QDs) for PEC water oxidation. The decoration of core-shell QDs concurrently extends the absorption range of BiVO₄ from the ultraviolet-visible to NIR region and promotes the effective separation and transfer of photo-excited electrons and holes. Without any sacrificial agents and co-catalysts, the as-fabricated NIR core-shell QDs/BiVO₄ heterostructured photoanodes exhibit an approximately fourfold higher photocurrent density than that of the bare BiVO₄, up to 3.17 mA cm^-2 at 1.23 V versus the reversible hydrogen electrode. It is revealed that both a suitable band alignment and an intimate interfacial junction between QDs and BiVO₄ are the main factors that result in enhanced charge separation and transfer efficiencies. We also highlight that the NIR CISeS QDs passivated with a ZnS shell can suppress the non-radiative recombination and enhance the stability of the QD photoanodes for optimized PEC performance. This work provides a facile and effective approach to boost the water oxidation efficiency of semiconductor photoanodes via utilizing NIR core-shell QDs as a light sensitizer and charge carrier separator.

Investigation and Optimization of Mxene Functionalized Mesoporous Titania Films as Efficient Photoelectrodes

Three-dimensional mesoporous TiO2 scaffolds of anatase phase possess inherent eximious optical behavior that is beneficial for photoelectrodes used for solar energy conversion applications. In this regard; substantial efforts have been devoted to maximizing the UV and/or visible light absorption efficiency; and suppressing the annihilation of photogenerated charged species; in pristine mesoporous TiO2 structures for improved solar illumination conversion efficiency. This study provides fundamental insights into the use of Mxene functionalized mesoporous TiO2 as a photoelectrode. This novel combination of Mxene functionalized TiO2 electrodes with and without TiCl4 treatment was successfully optimized to intensify the process of photon absorption; charge segregation and photocurrent; resulting in superior photoelectrode performance. The photocurrent measurements of the prepared photoelectrodes were significantly enhanced with increased contents of Mxene due to improved absorption efficiency within the visible region; as verified by UV-Vis absorption spectroscopy. The anatase phase of TiO2 was significantly augmented due to increased contents of Mxene and postdeposition heat treatments; as evidenced by structural analysis. Consequently; an appreciable coverage of well-developed grains on the FTO surface was observed in SEM images. As such; these newly fabricated conductive mesoporous TiO2 photoelectrodes are potential candidates for photoinduced energy conversion and storage applications.

Boosting the quantum efficiency of the BiVO4 photoanode by increasing the oxygen vacancies for highly-efficient solar water oxidation

BiVO₄ (BVO) is a promising photoanode material for photoelectrochemical (PEC) water splitting. However, it is severely restricted by its short charge diffusion length and poor charge transport. Introducing oxygen vacancies into BVO is an effective method to solve these problems because they serve as surface electron capture sites and facilitate charge separation. In this work, a novel gas reaction method using chemical vapor deposition was used to produce abundant oxygen vacancies in single-crystal BVO. Oxygen vacancies in BVO acted as hole donors. This method effectively reduced the surface agglomeration and produced uniform BVO crystals. The optimized BVO photoanode achieved a photocurrent density of 2.44 mA cm^-2 (1.23 V vs. RHE) and an incident photon-to-current efficiency of 90% (450 nm). This work provides an effective strategy to prepare high-performance BVO photoanodes by chemical vapor deposition, electrodeposition and thermal evaporation.

Artificial photosynthesis: photoanodes based on polyquinoid dyes onto mesoporous tin oxide surface

Dye-sensitized photoelectrochemical cells represent an appealing solution for artificial photosynthesis, aimed at the conversion of solar light into fuels or commodity chemicals. Extensive efforts have been directed towards the development of photoelectrodes combining semiconductor materials and organic dyes; the use of molecular components allows to tune the absorption and redox properties of the material. Recently, we have reported the use of a class of pentacyclic quinoid organic dyes (KuQuinone) chemisorbed onto semiconducting tin oxide as photoanodes for water oxidation. In this work, we investigate the effect of the SnO₂ semiconductor thickness and morphology and of the dye-anchoring group on the photoelectrochemical performance of the electrodes. The optimized materials are mesoporous SnO₂ layers with 2.5 μm film thickness combined with a KuQuinone dye with a 3-carboxylpropyl-anchoring chain: these electrodes achieve light-harvesting efficiency of 93% at the maximum absorption wavelength of 533 nm, and photocurrent density J up to 350 μA/cm² in the photoelectrochemical oxidation of ascorbate, although with a limited incident photon-to-current efficiency of 0.075%. Calculations based on the density functional theory (DFT) support the role of the reduced species of the KuQuinone dye via a proton-coupled electron transfer as the competent species involved in the electron transfer to the tin oxide semiconductor. Finally, a preliminary investigation of the photoelectrodes towards benzyl alcohol oxidation is presented, achieving photocurrent density up to 90 μA/cm² in acetonitrile in the presence of N-hydroxysuccinimide and pyridine as redox mediator and base, respectively. These results support the possibility of using molecular-based materials in synthetic photoelectrochemistry.

Effect of a Cocatalyst on a Photoanode in Water Splitting: A Study of Scanning Electrochemical Microscopy

With a proper band gap of ∼2.4 eV for solar light absorption and suitable valence band edge position for oxygen evolution, scheelite-monoclinic bismuth vanadate (BiVO₄) has become one of the most attractive photocatalysts for efficient visible-light-driven photoelectrochemical (PEC) water splitting. Several studies have indicated that surface modification of BiVO₄ with a cocatalyst such as NiFe layered double hydroxide (LDH) can significantly increase the PEC water splitting performance of the catalyst. Herein, we experimentally investigated the charge transfer dynamics and charge carrier recombination processes by scanning electrochemical microscopy (SECM) with the feedback mode on the surface of BiVO₄ and BiVO₄/NiFe-LDH as model samples. The ratio of rate constants for photogenerated hole (k_h+⁰) to electron (k_e-⁰) via the photocatalyst of BiVO₄/NiFe-LDH reacting with the redox couple is found to be five times larger than that of BiVO₄ under illumination. In this case, the ratio of the rate constants k_h+⁰/k_e-⁰ stands for the interfacial charge recombination process. This implies the cocatalyst NiFe-LDH suppresses the electron back transfer greatly and finally reduces the surface recombination. Control experiments with cocatalysts CoPi and RuO_x onto BiVO₄ further verify this conclusion. Therefore, the SECM characterization allows us to make an overall analysis on the function of cocatalysts in the PEC water splitting system.

Synthesis of Molybdenum Sulfide/Tellurium Hetero-Composite by a Simple One-Pot Hydrothermal Technique for High-Performance Supercapacitor Electrode Material

It is necessary to investigate effective energy storage devices that can fulfill the requirements of short-term and long-term durable energy outputs. Here, we report a simple one-pot hydrothermal technique through which to fabricate the MoS2/Te nanocomposite to be used as an effective electrode material for high-performance supercapacitors. Comprehensive characterization of the as-fabricated nanomaterial was performed using FESEM, HRTEM, XRD, FTIR, XPS, etc., as well as electrochemical characterizations. The electrochemical characterization of the as-fabricated nanocomposite electrode material showed a high specific capacitance of 402.53 F g-1 from a galvanostatic charge-discharge (GCD) profile conducted at 1 A g-1 current density. The electrode material also showed significant rate performance with high cyclic stability reaching up to 92.30% under 4000 cycles of galvanostatic charge-discharge profile at a current density of 10 A g-1. The highly encouraging results obtained using this simple synthetic approach demonstrate that the hetero-structured nanocomposite of MoS2/Te electrode material could serve as a promising composite to use in effective supercapacitors or energy storage devices.

Hematite Photoanodes for Water Oxidation: Electronic Transitions, Carrier Dynamics, and Surface Energetics

We review the current understanding of charge carriers in model hematite photoanodes at different stages. The origin of charge carriers is discussed based on the electronic structure and absorption features, highlighting the controversial assignment of the electronic transitions near the absorption edge. Next, the dynamic evolution of charge carriers is analyzed both on the ultrafast and on the surface reaction timescales, with special emphasis on the arguable spectroscopic assignment of electrons/holes and their kinetics. Further, the competitive charge transfer centers at the solid-liquid interface are reviewed, and the chemical nature of relevant surface states is updated. Finally, an overview on the function of widely employed surface cocatalysts is given to illustrate the complex influence of physiochemical modifications on the charge carrier dynamics. The understanding of charge carriers from their origin all the way to their interfacial transfer is vital for the future of photoanode design.