Multifunctional nanoplatform based on tetragonal BaTiO3-Au@polydopamine for computed tomography imaging-guided photothermal synergistic and enhanced piezocatalytic cancer therapy

Non-centrosymmetric tetragonal barium titanate nanocrystals have the potential to serve as piezoelectric catalysts in cancer therapy. When exposed to ultrasound irradiation, BaTiO3 can generate reactive oxygen species with a noninvasive and deep tissue-penetrating approach. However, the application of BaTiO3 in cancer nanomedicine is limited by their biosafety, biocompatibility, and dosage efficiency. To explore the potential application of BaTiO3 in nanomedical cancer treatment, we introduced ultra-small Au nanoparticles onto the surface of BaTiO3 to enhance the piezoelectric catalytic performance. Additionally, we also coated the BaTiO3 with polydopamine to improve their biosafety and biocompatibility. This led to the preparation of a novel multifunctional BaTiO3-based nanoplatform called BTAPs. In vitro and in vivo experiments demonstrated that the incorporation of Au dopants and polydopamine coating successfully improved the piezoelectric catalysis properties and biocompatibility of BaTiO3. Compared with unmodified BaTiO3, BTAPs achieved a similar piezoelectric catalytic effect at a low dose (0.3 mg ml-1 in vitro and 10 mg kg-1 in vivo). Moreover, BTAPs also exhibited enhanced properties in computed tomography imaging and photothermal effects in vivo. Therefore, BTAPs offer valuable insights into the advantages and limitations of piezoelectric catalytic nanomedicine in cancer treatment.

Enhanced Catalytic Performance of Ag NP/0.95AgNbO3-0.05LiTaO3 Heterojunction from the Combination of Surface Plasma Resonance Effect and Piezoelectric Effect Using Facile Mechanical Milling

An internal built electric field can suppress the recombination of electron-hole pairs and distinctly enhance the catalytic activity of a photocatalyst. Novel t-Ag/0.95AgNbO3-0.05LiTaO3 heterojunction was prepared by reducing silver nanoparticles (Ag NPs) on the surface of the piezoelectric powder 0.95AgNbO3-0.05LiTaO3 (0.05-ANLT) using a simple mechanical milling method. The effects of milling time and excitation source used for the degradation of organic dye by heterojunction catalysts were investigated. The results demonstrate that the optimized 1.5-Ag/0.05-ANLT heterojunction removes 97% RhB within 40 min, which is 7.8 times higher than that of single piezoelectric catalysis and 25.4 times higher than that of single photocatalysis. The significant enhancement of photocatalytic activity can be attributed to the synergistic coupling of the surface plasmon resonance (SPR) effect and the piezoelectric effect.

Electrospun membrane of bismuth vanadate-polyvinylidene fluoride nanofibers for efficient piezo-photocatalysis applications

The fabrication of a Poly (vinylidene fluoride) membrane (PVDF) and ceramic-assisted bismuth vanadate-polyvinylidene fluoride (BiVO4-PVDF) composite membrane was achieved through the utilization of the electrospinning technique. The composition and structure of the fabricated membranes were characterized by X-ray powder diffraction, Raman analysis, scanning electron microscopy, Thermo gravimetric analyzer, Fourier transform infrared spectroscopy, and UV-Vis spectroscopy techniques. The prepared polymeric membranes were then utilized for catalytic investigation and to explore, how structure affects catalytic activity using 5 mg/L, 10 mL methylene blue (MB) dye solution. Ultrasonication, visible light irradiation, and the combination were used to study piezocatalysis, photocatalysis, and piezo-photocatalysis, moreover, degradation intermediates were also explored using scavengers. Electrospun BiVO4-PVDF (BV-PVDF) composite has been found to have better piezocatalytic and photocatalytic properties than PVDF. The experimental findings reveal that the composite of BiVO4-PVDF demonstrates the highest efficiency in dye degradation, achieving a maximum degradation rate of 61% within a processing time of 180 min. The rate of degradation was calculated to be 0.0047 min-1, indicating a promising potential for the composite in the field of dye degradation.

Composition-driven morphological evolution of BaTiO3 nanowires for efficient piezocatalytic hydrogen production

Hydrogen production from water by piezocatalysis is very attractive owing to its high energy efficiency and novelty. BaTiO3, a highly piezoelectric material, is particularly suitable for this application due to its high piezoelectric potential, non-toxic nature, and physicochemical stability. Owing to the critical role of morphology on properties, one-dimensional (1D) materials are expected to exhibit superior water-splitting performance and thus there is a need to optimise the processing conditions to develop outstanding piezocatalysts. In the present work, piezoelectric BaTiO3 nanowires (NWs) were hydrothermally synthesised with precursor Ba:Ti molar ratios of 1:1, 2:1, and 4:1. The morphology, defect chemistry, and hydrogen evolution reaction (HER) efficiency of the as-synthesised BaTiO3 NWs were systematically investigated. The results showed that the morphological features, aspect ratio, structural stability and defect contents of the 1D morphologies collectively have a significant impact on the HER efficiency. The morphological evolution mechanism of the 1D structures were described in terms of ion exchange and dissolution-growth processes of template-grown BaTiO3 NWs for different Ba:Ti molar ratios. Notably, the BaTiO3 NWs synthesised with Ba:Ti molar ratio of 2:1 displayed high crystallinity, good defect concentrations, and good structural integrity under ultrasonication, resulting in an outstanding HER efficiency of 149.24 μmol h-1g-1 which is the highest obtained for nanowire morphologies. These results highlight the importance of synthesis conditions for BaTiO3 NWs for generating excellent piezocatalytic water splitting performance. Additionally, post-ultrasonication tested BaTiO3 NWs demonstrated unexpected photocatalytic activity, with the BTO-1 sample (1:1 Ba:Ti) exhibiting 56% photodegradation of RhB in 2 h of UV irradiation.

Ultrahigh Piezocatalytic Performance of Perovskite Ferroelectric Powder via Oxygen Vacancy Engineering

Piezocatalysis has increasingly gained prominence due to its enormous potential for addressing energy shortages and environmental pollution issues. Nonetheless, the low piezocatalytic activity of state-of-the-art materials seriously inhibits the practical applications of piezocatalysis. Here, it is proposed to greatly enhance the piezocatalytic activity for a perovskite ferroelectric, i.e., Sm-doped 0.68Pb(Mg1/3 Nb2/3 )-0.32PbTiO3 (Sm-PMN-PT, a solid solution with ultrahigh piezoelectricity), by introducing oxygen vacancies (OVs). The results show that the presence of OVs promotes the production of reactive oxygen species while enhancing the adsorption and activation of organic pollutants to improve piezocatalytic performance. The OV-Sm-PMN-PT is found to possess a superior piezocatalytic degradation rate constant of 0.073 min-1 under ultrasonic vibration, which is ≈4.9 times higher than that of pristine Sm-PMN-PT. Furthermore, the OV-Sm-PMN-PT can efficiently remove RhB under 400 rpm stirring, making it a promising candidate for water purification using low-frequency mechanical energy from nature. This research sheds light on the design of piezocatalytic materials via defect engineering.

Piezoelectric materials and techniques for environmental pollution remediation

With the rapid development of industrialization and agriculture, a series of critical imminent environmental problems and water pollution have caught wide attention from the public and society. Piezoelectric catalysis technology with piezoelectric materials is a green and environmental method that can efficiently improve the separation of electron-hole pairs, then generating the active substances such as OH, H₂O₂ and O₂^-, which can degrade water pollutants. Therefore, we firstly surveyed the piezoelectric catalysis in piezoelectric materials and systematically concluded and emphasized the relationship between piezoelectric materials and the piezoelectric catalytic mechanism, the goal to elucidate the effect of polarization on piezoelectric catalytic performance and enhance piezoelectric catalytic performance. Subsequently, the applications of piezoelectric materials in water treatment and environmental pollutant remediation were discussed including degradation of organic pollutants, removal of heavy mental ions, radionuclides, bacteria disinfection and water splitting for H₂ generation. Finally, the development prospects and future outlooks of piezoelectric catalysis were presented in detail.

Peroxymonosulfate Activation by BaTiO3 Piezocatalyst

Peroxymonosulfate (PMS) plays an important role in the advanced oxidation process for environmental remediation. In this study, barium titanate (BTO) piezocatalyst was selected for the activation of PMS driven by ultrasonic power. The degradation of Rhodamine B (RhB) by BTO single component, PMS single component, and BTO/PMS double components were investigated. The results indicated that PMS can be efficiently activated by BTO under an ultrasound with an RhB degradation rate of 98% within 20 min. The ultrasound not only promoted the activation of the PMS itself, but the surface charge carriers of BTO induced by the ultrasound also contributed to the activation of PMS. ·O2−, ·OH, and ·SO4− radicals were found to be the main active species that participated in the reaction. In order to verify the reaction’s environmental applicability, amoxicillin (AMX) as a typical environmental pollutant was studied. BTO/PMS displayed 80% removal efficiency of AMX, and the products generated were less toxic as demonstrated by eco-toxicity comparison. This work provides a promising strategy to improve the utilization of ultrasonic energy and apply it to the field of environmental pollutants treatment.

Enhanced piezotronics by single-crystalline ferroelectrics for uniformly strengthening the piezo-photocatalysis of electrospun BaTiO3@TiO2 nanofibers

Turning the built-in electric field by modulating the morphology and microstructure of ferroelectric materials is considered a viable approach to enhancing the piezo-photocatalytic activity of the ferroelectric/oxide semiconductor heterojunctions. Here, hydrothermally synthesized single-crystalline BaTiO₃ nanoparticles are employed to construct BaTiO₃@TiO₂ hybrid nanofibers by sol-gel assisted electrospinning of TiO₂ nanofibers and annealing. Because of the obvious enhancement of the synergetic piezo-photocatalytic effect under both ultrasonic and ultraviolet (UV) light irradiation, the piezo-photocatalytic degradation rate constant (k) of BaTiO₃@TiO₂ hybrid nanofibers on methyl orange (MO) reaches 14.84 × 10^-2 min^-1, which is approximately seven fold that for piezocatalysis and six fold that for photocatalysis. Moreover, BaTiO₃@TiO₂ core-shell nanoparticles are also synthesized for comparison purposes to assess the influence of microstructure on the piezo-photocatalysis by a wet-chemical coating of TiO₂ on BaTiO₃ nanoparticles. Such a high piezo-photocatalytic activity is attributed to the enhancement of the piezotronic effect by the single-crystalline ferroelectric nanoparticles and the nanoconfinement effect caused by the one-dimensional boundary of nanofibers with high specific surface areas. The mechanically induced uniform local built-in electric fields originated from the single-crystalline ferroelectric nanoparticles can enhance the separation of photogenerated electron and hole pairs and promote the formation of free hydroxyl radicals, resulting in a strong piezotronic effect boosted photochemical degradation of organic dye. This work introduces the single-crystalline ferroelectrics to construct ferroelectric/oxide semiconductor heterojunctions, and the enhanced local piezotronic effect uniformly strengthens the photochemical reactivity, which offers a new option to design high-efficiency piezo-photocatalysts for pollutant treatment.

Enhanced Piezocatalytic Activity in Bi1/2Na1/2TiO3 for Water Splitting by Oxygen Vacancy Engineering

Piezoelectric materials have demonstrated applicability in clean energy production and environmental wastewater remediation through their ability to initiate a number of catalytic reactions. In this study, we used a conventional sol-gel method to synthesize lead-free rhombohedral R3c bismuth sodium titanate (BNT) particles of various sizes. When used as a piezocatalyst to generate H₂ through water splitting, the BNT samples provided high production rates (up to 506.70 μmol g^-1 h^-1). These piezocatalysts also degraded the organic pollutant methylene blue (MB, 20 mg L^-1) with high efficiency (up to k = 0.039 min^-1), suggesting their potential to treat polluted water. Finally, we found that the piezopotential caused band tilting in the semiconductor and aided charge transfer such that recombination was suppressed and the rate of H₂ production increased. The mechanism of piezoelectric catalysis involved oxygen vacancies, the size of the catalyst, and the internal electric field playing important roles to enhance electron-hole separation, which further enhanced the catalysis reactions.

Enhanced Piezocatalysis by Calcium Phosphate Nanowires via Gold Nanoparticle Conjugation

Piezocatalytic materials have considerable application potential in wireless therapy. Most of these applications require biocompatible nanomaterials for in vivo targeting and control of intracellular processes. However, the piezocatalytic performance of a material decreases at a nanometer size regime, and most of the biocompatible materials have poor piezocatalytic efficiency. In particular, hydroxyapatite or calcium phosphate-based nanomaterials have weak piezocatalytic properties that limit the biomedical application potential. Here, we show that anisotropic shape and Au nanoparticle conjugation can enhance the piezocatalytic property of a calcium phosphate nanomaterial by 10 times and the performance approaches that of the bulk/nanoparticle form of well-known BaTiO3. The colloidal form of calcium phosphate nanowires/nanorods/nanospheres (2-5 nm diameter and 30-1000 nm length) and their Au nanoparticle (5-8 nm) composites are prepared, and their piezoelectric properties have been investigated with piezoresponse force microscopy. It has been observed that the anisotropic nanowire structure of calcium phosphate can enhance the piezoelectric property by 2 times and Au nanoparticle conjugation can enhance it up to 10 times with a piezoelectric constant value of 72 pm/V, which is close to the value of the bulk/nanoparticle form of BaTiO3. This enhanced piezoelectric property is shown to enhance the piezocatalytic reactions by 10 times. The approach has been used to design colloidal nano-bioconjugate for selective labeling of cancer cells, followed by wireless cell therapy via medical-grade ultrasound-based intracellular reactive oxygen species generation. The developed approach and material can be extended for wireless therapeutic applications and for controlling intracellular processes.

Synergistic Enhancement of Piezocatalytic Activity of BaTiO3 Convex Polyhedrons Nanocomposited with Ag NPs/Co3O4 QDs Cocatalysts

Piezocatalysis is one of the green and promising catalytic technologies for the degradation of organic pollutants. Surface modifications such as exposed facet engineering and surface decoration of nanoparticles (NPs) are simple but useful enhancement strategies for a catalytic system. However, the synergistic effect and mechanism of facet engineering and dual-cocatalyst decoration on piezocatalytic activity are still ambiguous and more investigations are expected. Herein, the piezocatalytic activities of BaTiO₃ (BTO) polyhedrons with anisotropic {001} and {110} facets and BTO cubes with isotropic {001} facets were compared. Furthermore, BaTiO₃ (BTO) convex polyhedrons with selectively deposited Ag NPs and uniformly loaded Co₃O₄ quantum dots (QDs) are rationally synthesized through photochemical deposition. The individual and synergistic effects of Ag NPs and Co₃O₄ QDs on the piezocatalytic activities are systematically studied. It was found that dual-cocatalyst-modified BTO possesses the highest piezocatalytic activity in methyl orange degradation, with a reaction constant k of 0.0539 min^-1, around 5, 2.2, and 1.3 times higher than that of nonmodified and Ag NP- and Co₃O₄ QD-modified BTO, respectively. Moreover, dual-cocatalyst-decorated BTO also exhibits excellent piezocatalytic performance in nondye pollutant degradation, with ∼100% tetracycline hydrochloride decomposed in 60 min. By analyzing the contribution, quantifying the amount of different free radicals, and comparing the chemical states of surface elements before and after piezocatalytic measurements, it was inferred that facet-dependent Ag NPs acted as efficient electron-transport sites, while uniformly loaded Co₃O₄ QDs served as hole-transfer sites to fully facilitate the migration of electrons and holes in a piezocatalytic reaction. This research presents a rational and effectual modification strategy to enhance the piezocatalytic activity of piezocatalysts and gives a thorough discussion of the enhanced mechanism.

Highly efficient piezoelectric field enhanced photocatalytic performance via in situ formation of BaTiO3 on Ti3C2Tx for phenolic compound degradation

Novel BaTiO3/Ti3C2Tx piezo-photocatalysts are fabricated via an in-situ solvothermal method. The synergistic effect of BaTiO3 and Ti3C2Tx increases piezo-photocatalytic activity.

Photodeposition of CoOx nanoparticles on BiFeO3 nanodisk for efficiently piezocatalytic degradation of rhodamine B by utilizing ultrasonic vibration energy

Piezoelectric materials have received much attention due to their great potential in environmental remediation by utilizing vibrational energy. In this paper, a novel piezoelectric catalyst, CoOx nanoparticles anchored BiFeO3 nanodisk composite, was intentionally synthesized via a photodeposition method and applied in piezocatalytic degradation of rhodamine B (RhB) under ultrasonic vibration. The as-synthesized CoOx/BiFeO3 composite presents high piezocatalytic efficiency and stability. The RhB degradation rate is determined to be 1.29 h-1, which is 2.38 folds higher than that of pure BiFeO3. Via optimizing the reaction conditions, the piezocatalytic degradation rate of the CoOx/BiFeO3 can be further increased to 3.20 h-1. A thorough characterization was implemented to investigate the structure, piezoelectric property, and charge separation efficiency of the CoOx/BiFeO3 to reveal the nature behind the high piezocatalytic activity. It is found that the CoOx nanoparticles are tightly adhered and uniformly dispersed on the surface of the BiFeO3 nanodisks. Strong interaction between CoOx and BiFeO3 triggers the formation of a heterojunction structure, which further induces the migration of the piezoinduced holes on the BiFeO3 to CoOx nanoparticles. The recombination of electron-hole pairs is retarded, thereby increasing the piezocatalytic performance greatly. This work may offer a new paradigm for the design of high-efficiency piezoelectric catalysts.

Flexible Ag@LiNbO3/PVDF Composite Film for Piezocatalytic Dye/Pharmaceutical Degradation and Bacterial Disinfection

A flexible poly(vinylidene difluoride) (PVDF) composite film embedding LiNbO₃ ceramics decorated with silver nanoparticles (Ag NPs) has been synthesized using the solvent casting method. The polar β-phase, Ag NPs, and LiNbO₃ phases were confirmed in the composite film using various characterization methods. The composite film showed promising degradation of cationic and anionic dyes using piezocatalysis under ultrasonication. Moreover, this composite film also effectively degraded two model pharmaceutical pollutants named tetracycline and ciprofloxacin using piezocatalysis under ultrasonication. In addition to this, this composite film piezocatalytically removed more than 99.999% of Escherichia coli and 96.65% of Staphylococcus aureus bacteria within 180 min of sonication. The piezocatalytic performance of the PVDF composite film embedding Ag-loaded LiNbO₃ in all three applications was superior to that obtained in the case of the PVDF film embedding LiNbO₃ and the bare PVDF film. This demonstrates the pronounced effect of Ag NPs in the increase of piezocatalytic activity in the composite film.

Enhanced Piezocatalytic Activity of Sr0.5Ba0.5Nb2O6 Nanostructures by Engineering Surface Oxygen Vacancies and Self-Generated Heterojunctions

Piezocatalysis provides a promising strategy for directly converting weak mechanical energy into chemical energy. In this work, we report a simple one-step hydrogen reduction route for the simultaneous generation of surface defects and heterojunctions in Sr_0.5Ba_0.5Nb₂O₆ nanorods fabricated by a molten salt synthesis method. The as-fabricated Sr_0.5Ba_0.5Nb₂O₆/Sr₂Nb₂O₇ nanocomposites with controllable oxygen vacancies exhibited excellent piezocatalytic activity under ultrasonic vibration, with an about 7 times enhancement of the rate constant (k = 0.0395 min^-1) for rhodamine B degradation and an about 10 times enhancement of the water-splitting efficiency for hydrogen generation (109.4 μmol g^-1 h^-1) for the optimized sample (H₂ annealed at 500 °C) compared to pristine Sr_0.5Ba_0.5Nb₂O₆ nanorods. This work demonstrates the essential role of a well-modulated oxygen vacancy concentration in the piezocatalytic activity and provides an inspiring guide for designing self-generated heterojunction piezocatalysts.

TiO2-Templated BaTiO3 Nanorod as a Piezocatalyst for Generating Wireless Cellular Stress

Although the piezoelectric property of a BaTiO₃ nanoparticle is routinely used in energy harvesting application, it can also be exploited for wireless cell stimulation and cell therapy. However, such biomedical application is rare due to limited availability of colloidal BaTiO₃ nanoparticles of <100 nm hydrodynamic size with good piezocatalytic property and efficient biolabeling performance. Here, we report a colloidal form of a piezocatalytic BaTiO₃-based nanorod of <100 nm hydrodynamic size that can offer wireless cell stimulation. The nanorod is prepared using a TiO₂ nanorod as the template, and the resultant TiO₂-BaTiO₃-based composite nanorod is coated with a hydrophilic polymer shell. These nanorods can label cells and, under the ultrasound exposure, produce reactive oxygen species inside cells via piezocatalysis, leading to cell death. These nanorods can be used for wireless modulation of intracellular processes.

Fast and Efficient Piezo/Photocatalytic Removal of Methyl Orange Using SbSI Nanowires

Piezocatalysis is a novel method that can be applied for degradation of organic pollutants in wastewater. In this paper, ferroelectric nanowires of antimony sulfoiodide (SbSI) have been fabricated using a sonochemical method. Methyl orange (MO) was chosen as a typical pollutant, as it is widely used as a dye in industry. An aqueous solution of MO at a concentration of 30 mg/L containing SbSI nanowires (6 g/L) was subjected to ultrasonic vibration. High degradation efficiency of 99.5% was achieved after an extremely short period of ultrasonic irradiation (40 s). The large reaction rate constant of 0.126(8) s^-1 was determined for piezocatalytic MO decomposition. This rate constant is two orders of magnitude larger than values of reaction rate constants reported in the literature for the most efficient piezocatalysts. These promising experimental results have proved a great potential of SbSI nanowires for their application in environmental purification and renewable energy conversion.

Synthesizing BaTiO3 Nanostructures to Explore Morphological Influence, Kinetics, and Mechanism of Piezocatalytic Dye Degradation

Piezocatalysts have attracted much attention due to their excellent degradation ability for organics. In this work, three types of BaTiO₃ (BTO) nanostructures, including hydrothermally synthesized nanocubes (NCs), sol-gel calcined nanoparticles (NPs), and electrospun nanofibers (NFs), are prepared for catalyzing the dye degradation. Compared with the NCs and NPs, the NFs exhibit a higher piezocatalytic degradation performance due to the large specific surface area, fine crystal size, and easy deformation structure. Moreover, the kinetic factors, including initial dye concentration, ionic strength, ultrasonic power, and applied action, influencing the degradation performance of the BTO NFs are analyzed deeply. A high degradation rate constant of 0.0736 min^-1 is achieved for rhodamine B, which is superior compared with the previous reports. The excellent stability of BTO NFs is demonstrated by the cycling tests, where a high degradation efficiency of 97.6% within 110 min is still obtained after the third cycle. Furthermore, the mechanism of piezocatalysis revealed that the hydroxyl and superoxide radicals are the main reactive species in the degradation process. This work is of importance for the development of high-performance piezocatalysts and highlights the potential of piezocatalysis for water remediation.

BaTiO3 Nanosheets and Caps Grown on TiO2 Nanorod Arrays as Thin-Film Catalysts for Piezocatalytic Applications

Powder-form piezocatalysts suffer from poor recyclability and pose a potential threat of creating serious secondary pollution, which restrict their practical applications. Thin-film piezocatalysts, which not only exhibit good recyclability but also fully contact with solution, are believed to be one of the solutions to address these problems. In this work, the nanostructured BaTiO₃ (BTO) thin films were fabricated by a facile hydrothermal method for their potential applications in piezocatalysis. The vertically standing BTO nanosheets grown on the top of TiO₂ nanorod arrays exhibited superior piezocatalytic performance as well as piezo-electrochemical property. Given the different strain states between thin-film piezocatalyst and powder-form piezocatalyst, both the impact force of water and isostatic pressure are taken into consideration in finite element method (FEM) simulation. The FEM simulation shows that a stronger piezoelectric filed can be built in BTO nanosheets because of their easier deformation, and thus can lead to a higher piezocatalytic degradation efficiency. Our work presented here is expected to provide a potential route for the nanoengineering of thin-film piezocatalysts and clarify the catalytic mechanism for substrate-fixed piezocatalysts.

Piezo-catalysis for nondestructive tooth whitening

The increasing demand for a whiter smile has resulted in an increased popularity for tooth whitening procedures. The most classic hydrogen peroxide-based whitening agents are effective, but can lead to enamel demineralization, gingival irritation, or cytotoxicity. Furthermore, these techniques are excessively time-consuming. Here, we report a nondestructive, harmless and convenient tooth whitening strategy based on a piezo-catalysis effect realized by replacement of abrasives traditionally used in toothpaste with piezoelectric particles. Degradation of organic dyes via piezo-catalysis of BaTiO3 (BTO) nanoparticles was performed under ultrasonic vibration to simulate daily tooth brushing. Teeth stained with black tea, blueberry juice, wine or a combination thereof can be notably whitened by the poled BTO turbid liquid after vibration for 3 h. A similar treatment using unpoled or cubic BTO show negligible tooth whitening effect. Furthermore, the BTO nanoparticle-based piezo-catalysis tooth whitening procedure exhibits remarkably less damage to both enamel and biological cells.

Synthesis of Bi4Ti3O12 decussated nanoplates with enhanced piezocatalytic activity

A variety of nanostructured Bi₄Ti₃O₁₂ materials with diverse morphologies were synthesized by a novel hydrothermal method using layered titanate Na₂Ti₃O₇ as a synthetic precursor. Among these materials, decussated nanoplates exhibit superior piezocatalytic activity compared with other piezocatalysts of the perovskite family. The enhanced piezocatalytic activity is attributed to the large piezoelectric potential difference and the short distance between polar surfaces, which may help enhance the driving force of charge transport. The finite element method (FEM) simulation of piezoelectric response in different Bi₄Ti₃O₁₂ nanostructures was performed to illustrate the influence of morphological features on the piezocatalytic performance. The catalytic mechanism of Bi₄Ti₃O₁₂ was investigated by the detection and characterization of free radicals and intermediate products with electron spin resonance (ESR) spin-trapping technique and liquid chromatography-mass spectrometry (LC-MS). This work may push forward the development of piezocatalytic materials, and provide insights into piezocatalysis for environmental applications.

Enhanced piezocatalytic, photocatalytic and piezo-/photocatalytic performance of diphasic Ba1−xCaxTiO3 nanowires near a solubility limit

Diphasic Ba_1−xCa_xTiO₃ nanowires near a solubility limit exhibit enhanced piezocatalytic, photocatalytic and piezo-/photocatalytic performance.