Cu/ZrO2 Catalyst Modified with Y2O3 for Effective and Stable Dehydration of Glycerol to Acetol

Glycerol is a main by-product of biodiesel production, and its further processing is essential for the biorefinery. In this paper, a highly active and stable catalyst for the catalytic dehydration of glycerol to acetol is obtained by modifying a Cu-Zr (ZrO2 supported Cu) catalyst with Y2O3 using a co-precipitation method. It is found that the addition of Y2O3 effectively enhances the catalytic performance of Cu-Zr. Cu-Zr reaches the highest selectivity (82.4%) to acetol at 24 h. However, the selectivity decreases to 70.1% at 36 h. The conversion also decreases from 99.2 to 91.1%. Cu-Zr-Y exhibits very high activity and very good stability. During a 250 h reaction, no deactivation is observed, and the conversion and selectivity remains ~100% and ~85%, respectively. The catalysts are characterized by XRD, TEM, H2-TPR, and NH3-TPD. The results reveal that Y2O3 not only improves the dispersion of Cu and the acidity of the catalyst but also restrains the agglomeration of Cu particles and assists retaining the main structure of support under reaction conditions. The high dispersion, high acidity content, and stable structure contributes to the excellent catalytic performance of Cu-Zr-Y.

Heterogeneous Catalysts for Glycerol Biorefineries: Hydrogenolysis to 1,2-Propylene Glycol

Research on the use of biomass resources for the generation of energy and chemical compounds is of great interest worldwide. The development and growth of the biodiesel industry has led to a parallel market for the supply of glycerol, its main by-product. Its wide availability and relatively low cost as a raw material make glycerol a basic component for obtaining various chemical products and allows for the development of a biorefinery around biodiesel plants, through the technological integration of different production processes. This work proposes a review of one of the reactions of interest in the biorefinery environment: the hydrogenolysis of glycerol to 1,2-propylene glycol. The article reviews more than 300 references, covering literature from about 20 years, focusing on the heterogeneous catalysts used for the production of glycol. In this sense, from about 175 catalysts, between bulk and supported ones, were revised and discussed critically, based on noble metals, such as Ru, Pt, Pd, and non-noble metals as Cu, Ni, Co, both in liquid (2-10 MPa, 120-260 °C) and vapor phase (0.1 MPa, 200-300 °C). Then, the effect of the main operational and decision variables, such as temperature, pressure, catalyst/glycerol mass ratio, space velocity, and H₂ flow, are discussed, depending on the reactors employed. Finally, the formulation of several kinetic models and stability studies are presented, discussing the main deactivation mechanisms of the catalytic systems such as coking, leaching, and sintering, and the presence of impurities in the glycerol feed. It is expected that this work will serve as a tool for the development of more efficient catalytic materials and processes towards the future projection of glycerol biorefineries.

Critical Assessment of the Sustainability of Deep Eutectic Solvents: A Case Study on Six Choline Chloride-Based Mixtures

An outline of the advantages, in terms of sustainability, of Deep Eutectic Solvents (DESs) is provided, by analyzing some of the most popular DESs, obtained by the combination of choline chloride, as a hydrogen bond acceptor, and six hydrogen bond donors. The analysis is articulated into four main issues related to sustainability, which are recurrently mentioned in the literature, but are often taken for granted without any further critical elaboration, as the prominent green features of DESs: their low toxicity, good biodegradability, renewable sourcing, and low cost. This contribution is intended to provide a more tangible, evidence-based evaluation of the actual green credentials of the considered DESs, to reinforce or question their supposed sustainability, also in mutual comparison with one another.

Sustainably Recycling and Upcycling of Single-Use Plastic Wastes through Heterogeneous Catalysis

The huge amount of plastic waste has caused a series of environmental and economic problems. Depolymerization of these wastes and their conversion into desired chemicals have been regarded as a promising route for dealing with these issues, which strongly relies on catalysis for C-C and C-O bond cleavage and selective transformation. Here, we reviewed recent developments in catalysis systems for dealing with single-use plastics, such as polyethylene, polypropylene, and polyethylene glycol terephthalate. The recycling processes of depolymerization into original monomers and conversion into other economic-incentive chemicals were systemically discussed. Rational designs of catalysts for efficient conversion were particularly highlighted. Overall, improving the tolerance of catalysts to impurities in practical plastics, reducing the economic cost during the catalytic depolymerization process, and trying to obtain gaseous hydrogen from plastic wastes are suggested as the developing trends in this field.

Ru/C-Catalyzed Hydrogenation of Aqueous Glycolic Acid from Microalgae - Influence of pH and Biologically Relevant Additives

Ethylene glycol (EG) is obtained by a novel, two‐step approach combining a biotechnological and a heterogeneously catalyzed step. First, microalgae are cultivated to photobiocatalytically yield glycolic acid (GA) by means of photosynthesis from CO₂ and water. GA is continuously excreted into the surrounding medium. In the second step, the GA‐containing algal medium is used as feedstock for catalytic reduction with H₂ to EG over a Ru/C catalyst. The present study focuses on the conversion of an authentic algae‐derived GA solution. After identification of the key characteristics of the algal medium (compared to pure aqueous GA), the influence of pH, numerous salt additives, pH buffers and other relevant organic molecules on the catalytic GA reduction was investigated. Nitrogen‐ and sulfur‐containing organic molecules can strongly inhibit the reaction. Moreover, pH adjustment by acidification is required, for which H₂SO₄ is found most suitable. In combination with a modification of the biotechnological process to mitigate the use of inhibitory compounds, and after acidifying the algal medium, over Ru/C a EG yield of up to 21 % even at non‐optimized reaction conditions was achieved.

Safe and sustainable by design: A computer-based approach to redesign chemicals for reduced environmental hazards

Persistency of chemicals in the environment is seen a pressing issue as it results in accumulation of chemicals over time. Persistent chemicals can be an asset in a well-functioning circular economy where products are more durable and can be reused or recycled. This objective can however not always be fulfilled as release of chemicals from products into the environment can be inherently coupled to their use. In these situations, chemicals should be designed for degradation. In this study, a systematic and computer-aided workflow was developed to facilitate the chemical redesign for reduced persistency. The approach includes elements of Essential Use, Alternatives Assessment and Green and Circular Chemistry and ties into goals recently formulated in the context of the EU Green Deal. The organophosphate chemical triisobutylphosphate (TiBP) was used as a case study for exploration of the approach, as its emission to the environment was expected to be inevitable when used as a flame retardant. Over 6.3 million alternative structures were created in silico and filtered based on QSAR outputs to remove potentially non-readily biodegradable structures. With a multi-criteria analysis based on predicted properties and synthesizability a top 500 of most desirable structures was identified. The target structure (di-n-butyl (2-hydroxyethyl) phosphate) was manually selected and synthesized. The approach can be expanded and further verified to reach its full potential in the mitigation of chemical pollution and to help enable a safe circular economy.

Synthesis of α-Hydroxy Acids via Dehydrogenative Cross-Coupling of a Sustainable C2 Chemical (Ethylene Glycol) with Alcohols

Ir(NHC) (NHC, N-heterocyclic carbene)-catalyzed dehydrogenative coupling of sustainable ethylene glycol and various bioalcohols can produce industrially valuable α-hydroxy acids (AHAs). This study is the first to report the sustainable synthesis of higher C_n AHAs, in addition to glycolic acid (C₂ AHA) and lactic acid (C₃ AHA). This catalytic system can be recycled to the seventh cycle while maintaining good yields. A reaction mechanism, including facile dehydrogenation of each alcohol and fast cross-coupling of dehydrogenated aldehydes forming products, was proposed based on ¹⁸O- and ²H-labeling experiments and electron spray ionization-mass spectrometry (ESI-MS) and NMR spectral analyses.

Ambient-pressure lignin valorization to high-performance polymers by intensified reductive catalytic deconstruction

Chemocatalytic lignin valorization strategies are critical for a sustainable bioeconomy, as lignin, especially technical lignin, is one of the most available and underutilized aromatic feedstocks. Here, we provide the first report of an intensified reactive distillation–reductive catalytic deconstruction (RD-RCD) process to concurrently deconstruct technical lignins from diverse sources and purify the aromatic products at ambient pressure. We demonstrate the utility of RD-RCD bio-oils in high-performance additive manufacturing via stereolithography 3D printing and highlight its economic advantages over a conventional reductive catalytic fractionation/RCD process. As an example, our RD-RCD reduces the cost of producing a biobased pressure-sensitive adhesive from softwood Kraft lignin by up to 60% in comparison to the high-pressure RCD approach. Last, a facile screening method was developed to predict deconstruction yields using easy-to-obtain thermal decomposition data. This work presents an integrated lignin valorization approach for upgrading existing lignin streams toward the realization of economically viable biorefineries.

Sustainability in Heritage Wood Conservation: Challenges and Directions for Future Research

Conserving the world’s cultural and natural heritage is considered a key contributor to achieving the targets set out in the United Nation’s Sustainable Development Goals, yet how much attention do we pay to the methods we use to conserve and protect this heritage? With a specific focus on wooden objects of cultural heritage, this review discusses the current state-of-the-art in heritage conservation in terms of sustainability, sustainable alternatives to currently used consolidants, and new research directions that could lead to more sustainable consolidants in the future. Within each stage a thorough discussion of the synthesis mechanisms and/or extraction protocols, particularly for bio-based resources is provided, evaluating resource usage and environmental impact. This is intended to give the reader a better understanding of the overall sustainability of each different approach and better evaluate consolidant choices for a more sustainable approach. The challenges facing the development of sustainable consolidants and recent research that is likely to lead to highly sustainable new consolidant strategies in the future are also discussed. This review aims to contribute to the ongoing discussion of sustainable conservation and highlight the role that consolidants play in truly sustainable heritage conservation.

Towards Sustainable Oxalic Acid from CO2 and Biomass

To quickly and drastically reduce CO2 emissions and meet our ambitions of a circular future, we need to develop carbon capture and storage (CCS) and carbon capture and utilization (CCU) to deal with the CO2 that we produce. While we have many alternatives to replace fossil feedstocks for energy generation, for materials such as plastics we need carbon. The ultimate circular carbon feedstock would be CO2 . A promising route is the electrochemical reduction of CO2 to formic acid derivatives that can subsequently be converted into oxalic acid. Oxalic acid is a potential new platform chemical for material production as useful monomers such as glycolic acid can be derived from it. This work is part of the European Horizon 2020 project "Ocean" in which all these steps are developed. This Review aims to highlight new developments in oxalic acid production processes with a focus on CO2 -based routes. All available processes are critically assessed and compared on criteria including overall process efficiency and triple bottom line sustainability.

Valorisation of plastic waste via metal-catalysed depolymerisation

Metal-catalysed depolymerisation of plastics to reusable building blocks, including monomers, oligomers or added-value chemicals, is an attractive tool for the recycling and valorisation of these materials. The present manuscript shortly reviews the most significant contributions that appeared in the field within the period January 2010–January 2020 describing selective depolymerisation methods of plastics. Achievements are broken down according to the plastic material, namely polyolefins, polyesters, polycarbonates and polyamides. The focus is on recent advancements targeting sustainable and environmentally friendly processes. Biocatalytic or unselective processes, acid–base treatments as well as the production of fuels are not discussed, nor are the methods for the further upgrade of the depolymerisation products.

Engineering Escherichia coli for the utilization of ethylene glycol

Background

A considerable challenge in the development of bioprocesses for producing chemicals and fuels has been the high cost of feedstocks relative to oil prices, making it difficult for these processes to compete with their conventional petrochemical counterparts. Hence, in the absence of high oil prices in the near future, there has been a shift in the industry to produce higher value compounds such as fragrances for cosmetics. Yet, there is still a need to address climate change and develop biotechnological approaches for producing large market, lower value chemicals and fuels.

Results

In this work, we study ethylene glycol (EG), a novel feedstock that we believe has promise to address this challenge. We engineer Escherichia coli (E. coli) to consume EG and examine glycolate production as a case study for chemical production. Using a combination of modeling and experimental studies, we identify oxygen concentration as an important metabolic valve in the assimilation and use of EG as a substrate. Two oxygen-based strategies are thus developed and tested in fed-batch bioreactors. Ultimately, the best glycolate production strategy employed a target respiratory quotient leading to the highest observed fermentation performance. With this strategy, a glycolate titer of 10.4 g/L was reached after 112 h of production time in a fed-batch bioreactor. Correspondingly, a yield of 0.8 g/g from EG and productivity of 0.1 g/L h were measured during the production stage. Our modeling and experimental results clearly suggest that oxygen concentration is an important factor in the assimilation and use of EG as a substrate. Finally, our use of metabolic modeling also sheds light on the intracellular distribution through central metabolism, implicating flux to 2-phosphoglycerate as the primary route for EG assimilation.

Conclusion

Overall, our work suggests that EG could provide a renewable starting material for commercial biosynthesis of fuels and chemicals that may achieve economic parity with petrochemical feedstocks while sequestering carbon dioxide.

Progress in Production of 1, 3-propanediol From Selective Hydrogenolysis of Glycerol

1,3-propanediol (1,3-PDO) is an important bulk chemical widely used in the polyester and polyurethane industry. The selective hydrogenolysis of glycerol to value-added 1,3-PDO is extremely attractive. However, the formation of 1,3-PDO is less thermodynamically stable than 1,2-PDO, and the steric hindrance effect in the reaction process makes the highly selective production of 1,3-PDO a great challenge. In this mini review, the recent research progress on the selective catalytic hydrogenolysis of glycerol to 1,3-PDO is overviewed and the catalytic mechanism of the reaction is summarized. We mainly focus on the different performances of each type of catalyst (Pt-W-based catalysts, Ir-Re based-catalysts, and other types) as well as the interactions between metals and supports. Finally, several personal perspectives on the opportunities and challenges within this promising field are discussed.

Recent Advances in Glycerol Catalytic Valorization: A Review

Once a biorefinery is ready to operate, the main processed materials need to be completely evaluated in terms of many different factors, including disposal regulations, technological limitations of installation, the market, and other societal considerations. In biorefinery, glycerol is the main by-product, representing around 10% of biodiesel production. In the last few decades, the large-scale production of biodiesel and glycerol has promoted research on a wide range of strategies in an attempt to valorize this by-product, with its transformation into added value chemicals being the strategy that exhibits the most promising route. Among them, C3 compounds obtained from routes such as hydrogenation, oxidation, esterification, etc. represent an alternative to petroleum-based routes for chemicals such as acrolein, propanediols, or carboxylic acids of interest for the polymer industry. Another widely studied and developed strategy includes processes such as reforming or pyrolysis for energy, clean fuels, and materials such as activated carbon. This review covers recent advances in catalysts used in the most promising strategies considering both chemicals and energy or fuel obtention. Due to the large variety in biorefinery industries, several potential emergent valorization routes are briefly summarized.

Plasma-Catalysis for Volatile Organic Compounds Decomposition: Complexity of the Reaction Pathways during Acetaldehyde Removal

Acetaldehyde removal was carried out using non-thermal plasma (NTP) at 150 J·L−1, and plasma-driven catalysis (PDC) using Ag/TiO2/SiO2, at three different input energies—70, 350 and 1150 J·L−1. For the experimental configuration used, the PDC process showed better results in acetaldehyde (CH3CHO) degradation. At the exit of the reactor, for both processes and for all the used energies, the same intermediates in CH3CHO decomposition were identified, except for acetone which was only produced in the PDC process. In order to contribute to a better understanding of the synergistic effect between the plasma and the catalyst, acetaldehyde/catalyst surface interactions were studied by diffuse-reflectance infrared Fourier transform spectroscopy (DRIFTS). These measurements showed that different species such as acetate, formate, methoxy, ethoxy and formaldehyde are present on the surface, once it has been in contact with the plasma. A reaction pathway for CH3CHO degradation is proposed taking into account all the identified compounds in both the gas phase and the catalyst surface. It is very likely that in CH3CHO degradation the presence of methanol, one of the intermediates, combined with oxygen activation by silver atoms on the surface, are key elements in the performance of the PDC process.

Influences of Water Content in Feedstock Oil on Burning Characteristics of Fatty Acid Methyl Esters

Strong alkaline-catalyst transesterification with short-chain alcohol is generally used for biodiesel production due to its dominant advantages of shorter reaction time and higher conversion rate over other reactions. The existence of excess water content in the feedstock oil might retard the transesterification rate and in turn deteriorate the fuel characteristics of the fatty acid methyl esters. Hence, optimum water content in the raw oil, aimed towards both lower production cost and superior fuel properties, becomes significant for biodiesel research and industrial practices. Previous studies only concerned the influences of water contents on the yield or conversion rate of fatty acid methyl esters through transesterification of triglycerides. The effects of added water in the reactant mixture on burning characteristics of fatty acid methyl esters are thus first investigated in this study. Raw palm oil was added with preset water content before being transesterified. The experimental results show that the biodiesel produced from the raw palm oil containing a 0.05 wt.% added water content had the highest content of saturated fatty acids and total fatty acid methyl esters (FAME), while that containing 0.11 wt.% water content had the lowest content of total FAME and fatty acids of longer carbon chains than C16 among the biodiesel products. Regarding burning characteristics, palm-oil biodiesel made from raw oil with a 0.05 wt.% added water content among those biodiesels was found to have the highest distillation temperatures, flash point, and ignition point, which implies higher safety extents during handling and storage of the fuel. The added water content 0.05 wt.% in raw oil was considered the optimum to produce palm-oil biodiesel with superior fuel structure of fatty acids and burning characteristics. Higher or lower water content than 0.05 wt.% would cause slower nucleophilic substitution reaction and thus a lower conversion rate from raw oil and deteriorated burning characteristics in turn.

Bismuth as Smart Material and Its Application in the Ninth Principle of Sustainable Chemistry

This paper reports an overview of Green Chemistry and the concept of its twelve principles. This study focusses on the ninth principle of Green Chemistry, that is, catalysis. A report on catalysis, in line with its definition, background, classification, properties, and applications, is provided. The study also entails a green element called bismuth. Bismuth’s low toxicity and low cost have made researchers focus on its wide applications in catalysis. It exhibits smartness in all the catalytic activities with the highest catalytic performance among other metals.