Matrix-type bismuth-modulated copper-sulfur electrode using local photothermal effect strategy for efficient seawater splitting

Constructing catalytic electrodes with green economy, stability, and high efficiency is crucial for achieving overall economic water splitting. Herein, a matrix-type bismuth-modulated nickel-boron electrodes loaded on sulfurized copper foils (Bi-NiBx@CFS) is synthesized via in situ mild electroless plating. This electrode features a 2-dimensional (2D) matrix-type nanosheet structure with uniform, large pores, providing more active sites and ensuring a high gas transmission rate. Notably, the crystalline-amorphous structure constituted by the photothermal materials Bi and NiBx is loaded onto sulfide-based heterostructures. This enhances the catalytic activity through the "local photothermal effect" strategy. A performance enhancement of approximately 10 % is achieved for the Bi-NiBx@CFS at a current density of 10 mA cm-2 using this strategy at 298 K. This enhancement is equivalent to increasing the temperature of conventional electrolyte solutions by 321 K. In addition, the overpotential required to catalytically drive seawater splitting at the same current density is only 1.486 V. The Bi-NiBx@CFS electrode operates stably for 200 h without any performance degradation at industrial-grade current densities. The Bi-NiBx@CFS electrode under the "localized photothermal effect" strategy is expected to be a new type of electrocatalyst for overall seawater splitting.

Synergistic effects of CuS/TiO2 heterointerfaces: Enhanced cathodic CO2 reduction and anodic CH3OH oxidation for paired electrosynthesis of formate

The electrochemical reduction of carbon dioxide into energy-carrying compounds or value-added chemicals is of great significance for diminishing the greenhouse effect. However, it is still imperative to replace the less-value anodic oxygen evolution reaction (OER) to improve the technical economy. Herein, we firstly reported a bifunctional CuS/TiO2 catalyst for both anodic methanol oxidation reaction (MOR) and cathodic carbon dioxide reduction (CO2R). The in-built abundant CuS/TiO2 heterointerfaces are found to boost the CO2R and MOR to produce formate. Based on the unique bifunctionality of CuS/TiO2, a paired electrosynthesis of formate was performed with a total Faradaic efficiency (FE) of about 170 %, in which the cathodic CO2R achieved a formate FE of about 70 %, and the anodic MOR exhibited an almost 100 % formate FE.

Nitrogen-Doped CuO@CuS Core-Shell Structure for Highly Efficient Catalytic OER Application

Water electrolysis is a highly efficient route to produce ideally clean H2 fuel with excellent energy conversion efficiency and high gravimetric energy density, without producing carbon traces, unlike steam methane reforming, and it resolves the issues of environmental contamination via replacing the conventional fossil fuel. Particular importance lies in the advancement of highly effective non-precious catalysts for the oxygen evolution reaction (OER). The electrocatalytic activity of an active catalyst mainly depends on the material conductivity, accessible catalytically active sites, and intrinsic OER reaction kinetics, which can be tuned via introducing N heteroatoms in the catalyst structure. Herein, the efficacious nitrogenation of CuS was accomplished, synthesized using a hydrothermal procedure, and characterized for its electrocatalytic activity towards OER. The nitrogen-doped CuO@CuS (N,CuO@CuS) electrocatalyst exhibited superior OER activity compared to pristine CuS (268 and 602 mV), achieving a low overpotential of 240 and 392 mV at a current density of 10 and 100 mA/cm2, respectively, ascribed to the favorable electronic structural modification triggered by nitrogen incorporation. The N,CuO@CuS also exhibits excellent endurance under varied current rates and a static potential response over 25 h with stability measured at 10 and 100 mA/cm2.

Electronic Properties of Transition and Alkaline Earth Metal Doped CuS: A DFT Study

CuS is a unique semiconductor with potential in optoelectronics. Its unusual electronic structure, including a partially occupied valence band, and complex crystal structure with an S-S bond offer unique opportunities and potential applications. In this work, the use of doping to optimize the properties of CuS for various applications is investigated by density functional theory (DFT) calculations. Among the dopants studied, Ni, Zn, and Mg may be the most practical due to their lower formation energies. Doping with Fe, Ni, or Ca induces significant distortion, which may be beneficial for achieving materials with high surface areas and active states. Significantly, doping alters the conductor-like behavior of CuS, opening a band gap by increasing bond ionicity and reducing the S-S bond covalency. Thus, doping CuS can tune the plasmonic properties and transform it from a conductor to an intrinsic fluorescent semiconductor. Ni and Fe doping give the lowest band gaps (0.35 eV and 0.39 eV, respectively), while Mg doping gives the highest (0.86 eV). Doping with Mg, Ca, and Zn may enhance electron mobility and charge separation. Most dopants increase the anisotropy of electron-to-hole mass ratios, enabling device design that exploits directional-dependence for improved performance.

Highly enhanced electrocatalytic OER activity of water-coordinated copper complexes: effect of lattice water and bridging ligand

The use of metal-organic compounds as electrocatalysts for water splitting reactions has gained increased attention; however, a fundamental understanding of the structural requirement for effective catalytic activity is still limited. Herein, we synthesized water-coordinated mono and bimetallic copper complexes (CuPz-H₂O·H₂O, CuPz-H₂O, CuBipy-H₂O·H₂O, and CuMorph-H₂O) with varied intermetallic spacing (pyrazine/4,4'-bipyridine) and explored the structure-dependent oxygen evolution reaction (OER) activity in alkaline medium. Single crystal structural studies revealed water-coordinated monometallic complexes (CuMorph-H₂O) and bimetallic complexes (CuPz-H₂O·H₂O, CuPz-H₂O, CuBipy-H₂O·H₂O). Further, CuPz-H₂O·H₂O and CuBipy-H₂O·H₂O contained lattice water along with coordinated water. Interestingly, the bimetallic copper complex with lattice water and shorter interspacing between the metal centres (CuPz-H₂O·H₂O) showed strong OER activity and required an overpotential of 228 mV to produce a benchmark current density of 10 mA cm^-2. Bimetallic copper complex (CuPz-H₂O) without lattice water but the same intermetallic spacing and bimetallic complex with increased interspacing but with lattice water (CuBipy-H₂O·H₂O) exhibited relatively lower OER activity. CuPz-H₂O and CuBipy-H₂O·H₂O required an overpotential of 236 and 256 mA cm^-2, respectively. Monometallic CuMorph-H₂O showed the lowest OER activity (overpotential 271 mV) compared to bimetallic complexes. The low Tafel slope and charge transfer resistance of CuPz-H₂O·H₂O facilitated faster charge transfer kinetics at the electrode surface and supported the enhanced OER activity. The chronoamperometric studies indicated good stability of the catalyst. Overall, the present structure-electrocatalytic activity studies of copper complexes might provide structural insight for designing new efficient electrocatalysts based on metal coordination compounds.

Effect of Cooperative Redox Property and Oxygen Vacancies on Bifunctional OER and HER Activities of Solvothermally Synthesized CeO2/CuO Composites

Herein, we report the synthesis of the CeO₂/CuO composite as a bifunctional oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) electrocatalyst in a basic medium. The electrocatalyst with an optimum 1:1 CeO₂/CuO shows low OER and HER overpotentials of 410 and 245 mV, respectively. The Tafel slopes of 60.2 and 108.4 mV/dec are measured for OER and HER, respectively. More importantly, the 1:1 CeO₂/CuO composite electrocatalyst requires only a 1.61 V cell voltage to split water to achieve 10 mA/cm² in a two-electrode cell. The role of oxygen vacancies and the cooperative redox activity at the interface of the CeO₂ and CuO phases is explained in the light of Raman and XPS studies, which play the determining factor for the enhanced bifunctional activity of the 1:1 CeO₂/CuO composite. This work provides guidance for the optimization and design of a low-cost alternative electrocatalyst to replace the expensive noble-metal-based electrocatalyst for overall water splitting.

Emerging 2D Copper-Based Materials for Energy Storage and Conversion: A Review and Perspective

2D materials have shown great potential as electrode materials that determine the performance of a range of electrochemical energy technologies. Among these, 2D copper-based materials, such as Cu-O, Cu-S, Cu-Se, Cu-N, and Cu-P, have attracted tremendous research interest, because of the combination of remarkable properties, such as low cost, excellent chemical stability, facile fabrication, and significant electrochemical properties. Herein, the recent advances in the emerging 2D copper-based materials are summarized. A brief summary of the crystal structures and synthetic methods is started, and innovative strategies for improving electrochemical performances of 2D copper-based materials are described in detail through defect engineering, heterostructure construction, and surface functionalization. Furthermore, their state-of-the-art applications in electrochemical energy storage including supercapacitors (SCs), alkali (Li, Na, and K)-ion batteries, multivalent metal (Mg and Al)-ion batteries, and hybrid Mg/Li-ion batteries are described. In addition, the electrocatalysis applications of 2D copper-based materials in metal-air batteries, water-splitting, and CO₂ reduction reaction (CO₂ RR) are also discussed. This review also discusses the charge storage mechanisms of 2D copper-based materials by various advanced characterization techniques. The review with a perspective of the current challenges and research outlook of such 2D copper-based materials for high-performance energy storage and conversion applications is concluded.

Cu2S Nanoflakes Decorated with NiS Nanoneedles for Enhanced Oxygen Evolution Activity

Metal sulfides are considered excellent materials for oxygen evolution reaction because of their excellent conductivity and high electrocatalytic activity. In this report, the NiS-Cu₂S composites were prepared on copper foam (NiS-Cu₂S-CF) using a facile synthetic strategy. The scanning electron microscopy results confirmed that the NiS nanoneedles were successfully grown on Cu₂S nanoflakes, greatly increasing the active sites. Particularly, the optimized 15% NiS-Cu₂S-CF composite demonstrated excellent oxygen evolution activity with a small overpotential of 308 mV@20 mA cm⁻², which is significantly smaller than that of noble metal-based electrocatalysts and other NiS-Cu₂S-CF composites. The enhanced oxygen evolution activity is attributed to the unique morphology that can provide ample active sites, rich ion-transfer pathways, and the synergistic effect between NiS and Cu₂S, which can boost the electron transfer rate.

Solid-state synthesis of CdFe2O4 binary catalyst for potential application in renewable hydrogen fuel generation

Clean energy is highly needed at this time when the energy requirements are rapidly increasing. The observed increasing energy requirement are largely due to continued industrialization and global population explosion. The current means of energy source is not sustainable because of several reasons, most importantly, environmental pollution and human health deterioration due to burning of fossil fuels. Therefore, this study develops a new catalyst for hydrogen and oxygen evolution by water splitting as a potential energy vector. The binary metal oxide catalyst CdFe₂O₄ was synthesized by the solventless solid-mechanical alloying method. The as-prepared catalyst was well characterized by several methods including field emission scanning electron microscopy (FESEM), X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), Fourier Transform infrared red spectroscopy (FTIR), energy dispersive X-ray spectroscopy (XEDS). The as-prepared catalyst, CdFe₂O₄ was successfully applied for water electrolysis at a moderate overpotential (470 mV). Specifically, the onset potential for the oxygen and hydrogen evolution reactions (OER and HER) were 1.6 V_/RHE and 0.2 V_/RHE respectively (vs. the reversible hydrogen electrode). The electrode potential required to reach 10 mA/cm^-2 for OER (in alkaline medium) and HER (in acidic medium) was 1.70 V_/RHE (corresponding to overpotential η = 0.47 and − 0.30 V_/RHE (η = − 0.30 V) respectively. Similarly, the developed OER and HER catalyst displayed high current and potential stability for a period of 12 h. This approach is seen as the right track of making water electrolysis for hydrogen energy feasible through provision of low-energy requirement for the electrolytic process. Therefore, CdFe₂O₄ is a potential water splitting catalyst for hydrogen evolution which is a clean fuel and an antidote for world dependence on fossil fuel for energy generation.

Template-free synthesis of Mn2+ doped hierarchical CuS yolk-shell microspheres for photocatalytic reduction of Cr(VI)

Yolk-shell structures have been widely used in catalysis and energy storage in recent years because they improve the efficiency of charge utilization by enhancing light scattering and creating more active...

Synergistically enhanced performance of transition-metal doped Ni2P for supercapacitance and overall water splitting

Cost-effective and readily available catalysts applicable for electrochemical conversion technologies are highly desired. Herein, we report the synthesis of dithiophosphonate complexes of the type [Ni{S₂P(OH)(4-CH₃OC₆H₄)}₂] (1), [Co{S₂P(OC₄H₉)(4-CH₃OC₆H₄)}₃] (2) and [Fe{S₂P(OH)(4-CH₃OC₆H₄)}₃] (3) and employed them to prepare Ni₂P, Co-Ni₂P and Fe-Ni₂P nanoparticles. Ni₂P was formed by a facile hot injection method by decomposing complex 1 in tri-octylphosphine oxide/tri-n-octylphosphine at 300 °C. The prepared Ni₂P was doped with Co and Fe employing complexes 2 and 3, respectively, under similar experimental conditions. Doping Ni₂P with Co and Fe demonstrated synergistic improvement of Ni₂P performance as an electrocatalyst in supercapcitance, hydrogen evololution and oxygen evolution reactions in alkaline medium. Cobalt doping improved the Ni₂P charge storage capacity with a supercapacitance of 864 F g^-1 at 1 A g^-1 current density. Fe doped Ni₂P recorded the lowest overpotential of 259 mV to achieve a current density of 10 mA cm^-2 and a Tafel slope of 80 mV dec^-1 for OER, better than the undoped Ni₂P and the benchmark IrO₂. Likewise, Fe-doped Ni₂P electrode required the lowest overpotential of 68 mV with a Tafel slope of 110 mV dec^-1 to attain the same current density for HER. All catalysts showed excellent stability in supercapacitance and overall water splitting reactions, indicating their practical use in energy conversion technologies.

Comparative study between pure and manganese doped copper sulphide (CuS) nanoparticles

The pure CuS and Mn2+ doped CuS nanoparticles are synthesized by wet chemical route. The CuS phase and hexagonal crystal structure is confirmed by the powder X-ray diffraction and Raman analysis. The vibrational bonds present in the respective synthesized samples are confirmed by Fourier transformed infra-red spectroscopy. The spherical shapes of the nanoparticles are validated by the electron diffraction in scanning and transmission mode. The thermal analysis showed the Mn2+ doped CuS nanoparticles to be more stable than pure CuS nanoparticles. The thermal parameters determined using Coats-Redfern relation stated thermal activation energy and enthalpy change values are highest in the higher temperature range. The Seebeck coefficient variation with temperature and ambient condition Hall effect measurements showed the synthesized nanoparticles to be semiconducting and p-type in nature. The magnetic properties study by Gouy method showed the nanoparticles to be paramagnetic.

Oxygen-evolution reactions (OER) on transition-metal-doped Fe3Co(PO4)4 iron-phosphate surfaces: a first-principles study

A series of transition-metal-doped Fe_1−xM_xCo(PO₄)₄(010) and Fe₃Co_1−xM_x(PO₄)₄(010) electro-catalyst surfaces (with M = Mn, Os, Ru, Rh and Ir) have been modelled via density-functional theory (DFT) to gauge their oxygen-evolution reactions (OER).

Photosensitive activity of fabricated core-shell composite nanostructured p-CuO@CuS/n-Si diode for photodetection applications

Development of photo detectors based on different semiconducting materials with high performance has been in progress in recent past, however, there is a lot of difficulties in developing the more effective photo detectors-based devices with high responsivity, detectivity and quantum efficiency. Hence, we have synthesized pure CuS and CuO@CuS core-shell heterostructure based photo detectors with high performance by simple and cost-effective two-step chemical co-precipitation method. The phase purity of CuS and CuO@CuS composite was observed by XRD analysis and the result were verified with Raman spectroscopy studies. Sphere like morphology of pure CuS and core-shell structure formation of CuO@CuS are observed with scanning and transmission electron microscopes. The presence of expected elements has been confirmed with EDX elemental mapping. Light harvesting photodiodes were fabricated by using n-type silicon substrate through drop cost method. Photo sensitive parameters of fabricated diodes were analyzed by I-V characteristics. The p-CuO@CuS (1:1)/n-Si diode owned a maximum photosensitivity (Ps) ∼ 7.76 × 10⁴ %, photoresponsivity (R) ∼ 798.61 mA/W, external quantum efficiency ( E Q E )∼309.66 % and specific detectivity (D*) ∼ 8.19 × 10¹¹ Jones when compared to p-CuS/n-Si diode. The obtained results revealed that the core/shell heterostructure of CuO@CuS is the most appropriate for photo detection.

One-dimensional hierarchical nanostructures of NiCo2O4, NiCo2S4 and NiCo2Se4 with superior electrocatalytic activities toward efficient oxygen evolution reaction

Oxygen evolution reaction (OER), a sluggish multistep process in electrochemical water splitting, is still a challenging issue to achieve with cheap, earth-abundant non-precious and non-polluting materials. In this work, three different electrocatalysts, specifically NiCo₂O₄, NiCo₂ S₄, and NiCo₂ Se_4, synthesized by simple hydrothermal process, show excellent OER activity. This report not only projects OER performances but also demonstrates a modified method for the transformation of NiCo₂O₄ to NiCo₂ S₄ and NiCo₂ Se₄ via sulfidation and selenization reactions. The well crystalline, porous nature of NiCo₂O₄, NiCo₂ S₄, and NiCo₂Se₄ electrocatalysts with one dimensional (1D) structural morphology affords overpotentials of 346 mV, 309 mV and 270 mV at current density of 10 mA cm^-2 in 1 M KOH. In particular, NiCo₂Se₄ exhibits a low overpotential as well as a smaller Tafel slope of 63 mV dec^-1, leading to robust stability in alkaline conditions. The abundant active sites, large mass and size of NiCo₂Se₄ enhances the performance of the OER. This type of selenide-based material with low toxicity is also an advantage for eco-friendly applications.

A Low-Temperature Molecular Precursor Approach to Copper-Based Nano-Sized Digenite Mineral for Efficient Electrocatalytic Oxygen Evolution Reaction

In the urge of designing noble metal-free and sustainable electrocatalysts for oxygen evolution reaction (OER), herein, a mineral Digenite Cu9 S5 has been prepared from a molecular copper(I) precursor, [{(PyHS)2 CuI (PyHS)}2 ](OTf)2 (1), and utilized as an anode material in electrocatalytic OER for the first time. A hot injection of 1 yielded a pure phase and highly crystalline Cu9 S5 , which was then electrophoretically deposited (EPD) on a highly conducting nickel foam (NF) substrate. When assessed as an electrode for OER, the Cu9 S5 /NF displayed an overpotential of merely 298±3 mV at a current density of 10 mA cm-2 in alkaline media. The overpotential recorded here supersedes the value obtained for the best reported Cu-based as well as the benchmark precious-metal-based RuO2 and IrO2 electrocatalysts. In addition, the choronoamperometric OER indicated the superior stability of Cu9 S5 /NF, rendering its suitability as the sustainable anode material for practical feasibility. The excellent catalytic activity of Cu9 S5 can be attributed to the formation of a crystalline CuO overlayer on the conductive Cu9 S5 that behaves as active species to facilitate OER. This study delivers a distinct molecular precursor approach to produce highly active copper-based catalysts that could be used as an efficient and durable OER electro(pre)catalysts relying on non-precious metals.

Electrochemical Fingerprint of CuS-Hexagonal Chemistry from (Bis(N-1,4-Phenyl-N-(4-Morpholinedithiocarbamato) Copper(II) Complexes) as Photon Absorber in Quantum-Dot/Dye-Sensitised Solar Cells

The main deficit of quantum dot/dye-sensitised solar cells (QDSSCs) remains the absence of a photosensitiser that can absorb the entire visible spectrum and increase electrocatalytic activity by enhancing the conversion efficiency of QDSSCs. This placed great emphasis on the synthesis route adopted for the preparation of the sensitiser. Herein, we report the fabrication of hexagonal copper monosulfide (CuS) nanocrystals, both hexadecylamine (HDA) capped and uncapped, through thermal decomposition by thermogravimetric analysis (TGA) and a single-source precursor route. Morphological, structural, and electrochemical instruments were used to assert the properties of both materials. The CuS/HDA photosensitiser demonstrated an appropriate lifetime and electron transfer, while the electron back reaction of CuS lowered the electron lifetime in the QDSSCs. The higher electrocatalytic activity and interfacial resistance observed from current density-voltage (I–V) results agreed with electrochemical impedance spectroscopy (EIS) results for CuS/HDA. The successful fabrication of hexagonal CuS nanostructures of interesting conversion output suggested that both HDA capped and uncapped nanocrystals could be adopted in photovoltaic cells.

Synthesis of one dimensional Cu2S nanorods using a self-grown sacrificial template for the electrocatalytic oxygen evolution reaction (OER)

The oxygen evolution reaction (OER) is critical in electrochemical water splitting and requires an efficient, sustainable, and cheap catalyst for successful practical applications.

Study of “Ni-doping” and “open-pore microstructure” as physico-electrochemical stimuli towards the electrocatalytic efficiency of Ni/NiO for the oxygen evolution reaction

Added “Ni-doping” and “open-pore microstructure” act as physico-electrochemical stimuli towards enhanced electrocatalytic efficiency and electromechanical stability of Ni/NiO for the low-overpotential oxygen evolution reaction in alkaline medium.

Tunable optical and magnetic properties of Ni-doped CuSe nanowires using an anodic aluminum oxide template assisted hydraulic method

High uniformity of un-doped and Ni-doped CuSe nanowires have been fabricated by smelting the bulk and injecting the molten liquid into the anodic aluminum oxide (AAO) template. The Ni dopant concentration and morphology of CuSe nanowires can be well controlled via preparing the bulk materials and the channel size of the AAO template, respectively. The cathodoluminescence peaks of the un-doped, 0.5 at% and 1.0 at% Ni-doped CuSe nanowires showed a redshift of about 26 nm and 42 nm, respectively, from un-doped CuSe nanowires (579 nm). Furthermore, above room temperature ferromagnetism was observed in 1.0 at% Ni-doped CuSe nanowires at 300 K. The facile injection molding method fabricated nanowires with tunable optical and magnetic properties which could be applied to prepare various nanomaterials for spintronic devices in the future.