Multi-active photocatalysts of biochar-doped g-C3N4 incorporated with polyoxometalates for the high-efficient degradation of sulfamethoxazole

Sulfamethoxazole (SMX) is one of major antibiotic contaminants in current aqueous environment. In this paper, waste loofah and melamine were co-carbonized to prepare biochar-doped g-C3N4 (CCN) by a one-pot method and then combined with Co2PMo11VO40 (CoPMoV) using a binder to obtain the novel polyoxometalates (POMs) photocatalytic composites (CCN/CoPMoV). The incorporation of CoPMoV dramatically reduced the photogenerated carrier recombination and led to a small band gap. Under visible light, the synergetic activation from biochar, g-C3N4 and POMs can remove 98.5% of SMX (k = 0.215 min-1) in the peroxymonosulfate (PMS) system within 20 min and keep its high stability with the degradation of 88.9% after five cycles. Multi-active sites from CCN/CoPMoV are contributed to develop the most active species of , ·OH, 1O2, and h+. The validity in the degradation of SMX makes CCN/CoPMoV a promising and potential material for the removal of aqueous pollutants in the future.

Green Synthesis of Metal-Doped ZnO Nanoparticles Using Bauhinia racemosa Lam. Extract and Evaluation of Their Photocatalysis and Biomedical Applications

A fascinating problem in the fields of nanoscience and nanobiotechnology has recently emerged, and to tackle this, the production of metal oxide nanoparticles using plant extracts offers numerous benefits over traditional physicochemical methods. In the present investigation, ZnO nanoparticles were fabricated from Bauhinia racemosa Lam. (BR) leaves extract with various transition metal (TM) dopants (Ni, Mn, and Co). Plant leaves extract containing metal nitrate solutions were utilized as a precursor to synthesize the pristine and TM-doped ZnO nanoparticles. Structural, functional, optical, and surface properties of the fabricated samples were studied by using physicochemical and photoelectrochemical measurements. The organic pollutants tetracycline (TC), ampicillin (AMP), and amoxicillin (AMX) were used in the photocatalytic degradation assessment of the fabricated samples. Through X-ray diffraction (XRD) and transmission electron microscopy (TEM) investigation, the fabricated nanoparticles wurtzite crystal structure was verified. Moreover, Fourier transform infrared (FT-IR) analysis verified the existence of functional groups in the fabricated nanoparticles. The migration of electrons from the deep donor level and zinc interstitial to the Zn-defect and O-defect is related to the emission peaks seen at 468, 480, 534, and 450 nm in photoluminescence (PL) spectra. Co-ZnO nanoparticles demonstrated potent and excellent photocatalytic degradation performance for TC (91.09%), AMP (87.97%), and AMX (92.42%) antibiotics within 210, 180, and 150 min of visible light irradiation. Co-ZnO nanoparticles also demonstrated strong antimicrobial performance against Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, Aspergillus flavus, Aspergillus niger, and Bacillus subtilis. Further investigation of in vitro cytotoxic potential against the A549 cell line (IC50 = 24 ± 0.5 μg/mL) utilizing MTT assay and the free radical scavenging performance of Co-ZnO nanoparticles estimated by DPPH assay utilizing l-ascorbic acid as a reference was also performed. Anti-inflammatory potential is also reviewed by comparing it with the standard drug Diclofenac, and the maximum activity was obtained for Ni-ZnO nanoparticles (IC50 = 72.4 μg/mL).

Harnessing ZnCr2O4/g-C3N4 nanosheet heterojunction for enhanced photocatalytic degradation of rhodamine B and ciprofloxacin

Utilizing semiconductors for photocatalytic processes in water bodies as an approach to environmental remediation has gained considerable attention. Theoretical band position calculations revealed a type-II step-scheme charge flow mechanism for ZnCr2O4/g-C3N4 (ZCr/gCN), emphasizing effective heterojunction formation due to synergies between the materials. A composite of agglomerated nanoparticle ZnCr2O4 (Zinc chromium oxide - ZCr)/g-C3N4 (graphitic carbon nitride - gCN) nanosheets was synthesized using the ultrasonication and leveraging the heterojunction to enhance degradation efficiency and active sites participation. The synthesized sample was characterized by XRD, XPS, FTIR, BET, HRSEM, EDX, HRTEM, EIS PL, and UV-visible spectroscopy. XRD analysis confirmed the successful formation of pure ZnCr2O4, g-C3N4 (gCN), and their composite without any secondary phases. Optical investigations demonstrated a red shift (444-470 nm) in UV-visible spectra as ZnCr2O4 content increased. Morphological assessment via HRSEM unveiled agglomerated nanoparticle and nanosheet structures. FTIR analysis indicated the presence of gCN with the tri-s-triazine breathing mode at 807 cm-1, and the identification of octahedral Zn-O (598.11 cm-1) and tetrahedral Cr-O (447.01 cm-1) metal bonds within the spinel structure of ZnCr2O4. A Surface area of 134.162 m2/g was noticed with a microporous structure of pore radius 1.484 nm. Notably, the 15% ZCr/gCN composite achieved a remarkable 93.94 % (Rhodamine B-RhB) and 74.36 % (Ciprofloxacin - CIP) within 100 and 120 min, surpassing the performance of pure gCN. Improved degradation was attributed to higher charge separation (photo-excited electrons and holes), reducing charge recombination, as supported by photoluminescence and photoelectrochemical analyses. The presence of active species like superoxide during degradation was confirmed through a scavenger test. The stability analysis confirms the sample's stable nature (without secondary phase formation) after degradation. This work underscores the potential of ZnCr2O4 based metal-free compounds intended for effective environmental remediation.

Fabrication of a Carbonized Cellulose Nanofibrils/Ti3C2Tx MXene/g-C3N4 Heterojunction for Visible-Light-Driven Photocatalysis

Photocatalytic degrading pollutants driven by visible-light irradiation has attracted tremendous attention. One strategy of preparing carbonized cellulose nanofibrils/Ti₃C₂T_x MXene/g-C₃N₄ (CMCN) as a photocatalyst was developed. The as-prepared CMCN was comprehensively characterized in terms of the chemical composition, chemical and crystal structure, morphology, and photoelectrochemical properties. The CMCN was explored as a photocatalyst and exhibited good photocatalytic performance in degrading MB (96.5%), RhB (95.4%), and TC (86.5%) under visible-light conditions. In addition, the CMCN as a photocatalyst exhibited good reusability and stability. It is found that the incorporation of cellulose nanofibrils provided a high carbon content, a high porosity, and a large specific surface area, enhanced the electron transfer, improved the photocatalytic performance, and ensured a semiconductor with a high stability. It is believed that this study would provide an effective approach to preparing a photocatalyst and broaden the potential application of cellulose nanofibrils in photocatalysis.

Efficient photocatalytic degradation of emerging ciprofloxacin under visible light irradiation using BiOBr/carbon quantum dot/saponite composite

The use of visible-driven photocatalysts has fascinated attention as a capable and sustainable approach for wastewater remediation. In this work, BiOBr/carbon quantum dot (CQDs)/saponite composites (CQDs/Clay@BiOBr) were fabricated via hydrothermally using two different CQDs/Clay precursors (in-situ synthesis (IS) and physical mixing (PM)). The obtained products were characterized, and the photocatalytic performances of the prepared samples were evaluated in the photocatalytic decomposition of emerging ciprofloxacin (CIP) pharmaceutical waste. The highest CIP mineralization performance was achieved when a combination of BiOBr and CQDs/Clay (IS) with the appropriate proportion because the strong adhesion between CQDs and clay generate a great heterojunction in the composite. The stronger interaction of CQDs and better distribution of CQDs on the surface of clay in the CQDs/Clay (IS) enhanced the interaction of BiOBr and CQDs, and avoided the re-agglomeration of excess of CQDs on surface of BiOBr which reduce the active surface to receive the light and react with CIP. The ultrafast degradation rate of the optimized CQDs/Clay@BiOBr composite was better compared to others. The significant improvement in the CIP degradation efficiency of the CQDs/Clay@BiOBr composite was attributed to the excellent separation and transportation of photogenerated electrons and holes, as confirmed by photoluminescence, photocurrent density, and electrochemical impedance spectroscopy results. Moreover, the photocatalytic degradation mechanism of CIP in the CQDs/Clay@BiOBr composite was proposed based on the electronic states of each material in the composite and on a scavenger test. Thus, the proposed CQDs/Clay@BiOBr composite can be employed as a potential visible-light-driven photocatalyst for the decomposition of organic contaminants in wastewater.

Carbon nitride-based Z-scheme heterojunctions for solar-driven advanced oxidation processes

Solar-driven advanced oxidation processes (AOPs) via direct photodegradation or indirect photocatalytic activation of typical oxidants, such as hydrogen peroxide (H₂O₂), peroxymonosulfate (PMS), and peroxydisulfate (PDS), have been deemed to be an efficient technology for wastewater remediation. Artificial Z-scheme structured materials represent a promising class of photocatalysts due to their spatially separated charge carriers and strong redox abilities. Herein, we summarize the development of metal-free graphitic carbon nitride (g-C₃N₄, CN)-based direct and indirect Z-scheme photocatalysts for solar-driven AOPs in removing organic pollutants from water. In the work, the classification of AOPs, definition and validation of Z-schemes are summarized firstly. The innovative engineering strategies (e.g., morphology and dimensionality control, element doping, defect engineering, cocatalyst loading, and tandem Z-scheme construction) over CN-based direct Z-scheme structure are then examined. Rational design of indirect CN-based Z-scheme systems using different charge mediators, such as solid conductive materials and soluble ion pairs, is further discussed. Through examining the relationship between the Z-scheme structure and activity (charge transfer and separation, light absorption, and reaction kinetics), we aim to provide more insights into the construction strategies and structure modification on CN-based Z-schemes towards improving their catalytic performances in AOPs. Lastly, limitations, challenges, and perspectives on future development in this emerging field are proposed.

Designing Z-scheme AgIO4 nanorod embedded with Bi2S3 nanoflakes for expeditious visible light photodegradation of congo red and rhodamine B

The present study describes the enhanced photodegradation of organic pollutant dyes, congo red (CR) and rhodamine B (RhB) dyes under visible light irradiation. AgIO₄ nanorods decorated on Bi₂S₃ nanoflakes in various proportions were synthesized via sono-chemical route wherein the deposition of varying amounts of AgIO₄ on Bi₂S₃ plays a pivotal role in improving the photodegradation ability. The characterization of the as-synthesized nanohybrids was assessed by XRD, UV-vis DRS, PL, EIS, ESR, FT-IR, XPS, HR-TEM, FE-SEM, N₂ adsorption and desorption techniques. The effect of initial CR and RhB dye concentration, reaction pH and usage of nanohybrid concentration were investigated where 30%-AgIO₄/Bi₂S₃ exhibited excellent visible light photodegradation of 95.58% for CR and 96.11% for RhB dyes at 140 min and 100 min respectively. The superoxide (•O^2-) and hydroxyl radicals (•OH) played predominant role in the photodegradation of CR and RhB which is experimentally confirmed by radical trapping experiments. Also, the photocatalysts exhibited good photo stability and excellent reusability. The TOC analysis confirmed the complete mineralization of CR and RhB dyes by the nanohybrid and the formation of possible intermediate and degradation pathway was delineated based on GC/MS analysis. The outstanding photodegradation performance were ascribed to the Z-scheme charge transfer path, which effectively promotes the separation and transfer of e^-/h⁺ pairs, resulting in a strong redox activity of the accumulated charge to decompose organic dyes during the degradation reaction. The study suggested that the nanohybrid can be utilized for the removal of organic pollutants from the contaminated water bodies.

In Situ Construction of Bronze/Anatase TiO2 Homogeneous Heterojunctions and Their Photocatalytic Performances

Photocatalytic degradation is one of the most promising emerging technologies for environmental pollution control. However, the preparation of efficient, low-cost photocatalysts still faces many challenges. TiO2 is a widely available and inexpensive photocatalyst material, but improving its catalytic degradation performance has posed a significant challenge due to its shortcomings, such as the easy recombination of its photogenerated electron-hole pairs and its difficulty in absorbing visible light. The construction of homogeneous heterojunctions is an effective means to enhance the photocatalytic performances of photocatalysts. In this study, a TiO2(B)/TiO2(A) homogeneous heterojunction composite photocatalyst (with B and A denoting bronze and anatase phases, respectively) was successfully constructed in situ. Although the construction of homogeneous heterojunctions did not improve the light absorption performance of the material, its photocatalytic degradation performance was substantially enhanced. This was due to the suppression of the recombination of photogenerated electron-hole pairs and the enhancement of the carrier mobility. The photocatalytic ability of the TiO2(B)/TiO2(A) homogeneous heterojunction composite photocatalyst was up to three times higher than that of raw TiO2 (pure anatase TiO2).

A type II heterojunction α-Fe2O3/g-C3N4 for the heterogeneous photo-Fenton degradation of phenol

The heterogeneous photo-Fenton reaction is an effective method of chemical oxidation to remove phenol in wastewater with environmental friendliness and sustainability. Herein, the composite α-Fe₂O₃/g-C₃N₄, as a catalyst of the heterogeneous photo-Fenton reaction, has been synthesized by hydrothermal-calcination method using the abundant and low-cost FeCl₃·6H₂O and g-C₃N₄ as raw materials. The influence of the annealing temperature during calcination was also investigated. The UV-Vis diffuse reflectance spectra of samples show that the composite α-Fe₂O₃/g-C₃N₄ possesses the widest light response range. Furthermore, the transient photocurrent response curves demonstrated the strongest intensity of α-Fe₂O₃/g-C₃N₄. The annealed α-Fe₂O₃/g-C₃N₄ is indicative of the highest degradation efficiency in all samples due to the improvement of the charge transfer ability caused by the tight heterojunction structure. The results of the scavenger trapping experiments show that the hydroxyl radical was the main active species in degradation. Based on experimental results, a type II heterojunction should be built in the composite α-Fe₂O₃/g-C₃N₄, driving the photoelectrons transfer and migration by internal electronic field. This work provides a facile and new method to synthesize α-Fe₂O₃/g-C₃N₄ as an effective heterogeneous photo-Fenton catalyst for environmental remediation.

Composite α-Fe₂O₃/g-C₃N₄ with type II heterojunction to degrade phenol by heterogeneous photo-Fenton reaction.

A 2D/1D heterojunction nanocomposite built from polymeric carbon nitride and MIL-88A(Fe) derived α-Fe2O3 for enhanced photocatalytic degradation of rhodamine B

2D/1D heterojunction α-Fe2O3/C3N4 photocatalysts containing α-Fe2O3 microrods and polymeric carbon nitride flakes are synthesised through the calcination of Fe-based metal-organic frameworks and boost the visible light photocatalytic degradation of rhodamine B.

Photocatalytic production of H2O2 over facet-dependent Ti-MOF

The Z-scheme structure between Ti-MOF (001) and (111) facets for photocatalytic H2O2 production.

Recent advancements of g-C3N4-based magnetic photocatalysts towards the degradation of organic pollutants: a review

Heterogeneous photocatalysis premised on advanced oxidation processes has witnessed a broad application perspective, including water purification and environmental remediation. In particular, the graphitic carbon nitride (g-C₃N₄), an earth-abundant metal-free conjugated polymer, has acquired extensive application scope and interdisciplinary consideration owing to its outstanding structural and physicochemical properties. However, several issues such as the high recombination rate of the photo-generated electron-hole pairs, smaller specific surface area, and lower electrical conductivity curtail the catalytic efficacy of bulk g-C₃N₄. Another challenging task is separating the catalyst from the reaction medium, limiting their reusability and practical applications. Therefore, several methodologies are adopted strategically to tackle these issues. Attention is being paid, especially to the magnetic nanocomposites (NCs) based catalysts to enhance efficiency and proficient reusability property. This review summarizes the latest progress related to the design and development of magnetic g-C₃N₄-based NCs and their utilization in photocatalytic systems. The usefulness of the semiconductor heterojunctions on the catalytic activity, working mechanism, and degradation of pollutants are discussed in detail. The major challenges and prospects of using magnetic g-C₃N₄-based NCs for photocatalytic applications are highlighted in this report.

Bifunctional black phosphorus: coupling with hematite for Z-scheme photocatalytic overall water splitting

Z-scheme 2D–2D BP/α-Fe₂O₃ heterostructure enables preferable photocatalytic properties for efficient overall water splitting under visible light.

Ball-milling method encapsulated α-Fe2O3 into g-C3N4 as efficient and stable photo-catalysts

Ball-milling method encapsulated α-Fe2O3 into g-C3N4 as efficient and stable photo-catalysts.

Carbon-Intercalated 0D/2D Hybrid of Hematite Quantum Dots/Graphitic Carbon Nitride Nanosheets as Superior Catalyst for Advanced Oxidation

Efficient charge separation and sufficiently exposed active sites are important for light-driving Fenton catalysts. 0D/2D hybrids, especially quantum dots (QDs)/nanosheets (NSs), offer a better opportunity for improving photo-Fenton activity due to their high charge mobility and more catalytic sites, which is highly desirable but remains a great challenge. Herein, a 0D hematite quantum dots/2D ultrathin g-C₃ N₄ nanosheets hybrid (Fe₂ O₃ QDs/g-C₃ N₄ NS) is developed via a facile chemical reaction and subsequent low-temperature calcination. As expected, the specially designed 0D/2D structure shows remarkable catalytic performance toward the removal of p-nitrophenol. By virtue of large surface area, adequate active sites, and strong interfacial coupling, the 0D Fe₂ O₃ QDs/2D g-C₃ N₄ nanosheets establish efficient charge transport paths by local in-plane carbon species, expediting the separation and transfer of electron/hole pairs. Simultaneously, highly efficient charge mobility can lead to continuous and fast Fe(III)/Fe(II) conversion, promoting a cooperative effect between the photocatalysis and chemical activation of H₂ O₂ . The developed carbon-intercalated 0D/2D hybrid provides a new insight in developing heterogeneous catalysis for a large variety of photoelectronic applications, not limited in photo-Fenton catalysis.

Effects of the preparation method of Pt/g-C3N4 photocatalysts on their efficiency for visible-light hydrogen production

Pt NPs have been loaded on ultrathin porous g-C₃N₄ nanosheets (CNS) by either a chemical reduction (CR) or a photoreduction (PR) method. The Pt/CNS-CR photocatalyst shows a much higher efficiency for H₂ evolution than that of the Pt/CNS-PR.

An inverse opal TiO2/g-C3N4 composite with a heterojunction for enhanced visible light-driven photocatalytic activity

An inverse opal TiO₂/g-C₃N₄ composite with excellent photogenerated electron–hole separation efficiency and enhanced visible light absorption efficiency was constructed.

Direct Z scheme-fashioned photoanode systems consisting of Fe2O3 nanorod arrays and underlying thin Sb2Se3 layers toward enhanced photoelectrochemical water splitting performance

An elegant Z-scheme-fashioned photoanode consisting of Fe2O3 nanorod arrays and underlying thin Sb2Se3 layers was rationally constructed. The photocurrent density of the Sb2Se3-Fe2O3 Z-scheme photoanode reached 3.07 mA cm-2 at 1.23 V vs. RHE, three times higher than that of pristine Fe2O3 at 1.03 mA cm-2. An obvious cathodic shift of the photocurrent onset potential of about 200 mV was also observed. The transient photovoltage response demonstrates that the suitable band edges (ECB ∼ -0.4 eV and EVB ∼ 0.8 eV) of Sb2Se3, match well with Fe2O3 (ECB ∼ 0.29 eV and EVB ∼ 2.65 eV), permitting the photoexcited electrons on the conduction band of the Fe2O3 to transfer to the valence band of Sb2Se3, and recombine with the holes therein, thus allowing a high concentration of holes to collect in the Fe2O3 for water oxidation. The transient absorption spectra further corroborate that the built-in electric field in the p-n heterojunction leads to a more effective separation and a longer lifetime of the charge carriers.