Facile synthesis of bimetallic ACF/CC@FeOCl-Cu composite cathode for efficient degradation of sulfamethoxazole at neutral pH by a flow-through heterogeneous electro-Fenton process

Flow-through heterogeneous electro-Fenton (FHEF) process shows a broad prospect for refractory organic pollutants removal. However, maintaining a long-term service life of higher catalytic cathode is crucial for the development of cathode materials, especially for iron-functionalized cathode operated under harsh conditions. In this study, a novel bimetallic CC@FeOCl-Cu composite was synthesized through one-step calcination, coupled with a series of microstructure characterization methodology, including XRD, SEM-EDS, XPS, and FTIR. The superior catalytic activity of CC@FeOCl-Cu could be ascribed to Fe-Cu synergy and better dispersion of FeOCl nanosheets. With the optimal Cu:Fe ratio of 1:60, the bifunctional ACF/CC@FeOCl-Cu cathode was employed in FHEF process, exhibiting an outstanding performance for sulfamethoxazole (SMX) removal over a wide pH range (3.0-9.0). Comparison of experimental results indicated that the ACF/CC@FeOCl-Cu-FHEF process showed higher performance than ACF/CC@FeOCl-FHEF and homogeneous EF processes. The average SMX removal efficiency was 98% and TOC removal efficiency was more than 57% even after 10 cycles. Radical quenching experiments and electron spin resonance test confirmed that •OH was the primary active species. More •OH was generated in the ACF/CC@FeOCl-Cu-FHEF process because the doping of Cu could enhance catalytic activity of cathode. In addition, the satisfactory performance could be observed in the ACF/CC@FeOCl-Cu-FHEF process for the treatment of real landfill leachate, indicating its potential for practical application in wastewater treatment.

Sb-doped FeOCl nanozyme-based biosensor for highly sensitive colorimetric detection of glutathione

Nanozymes have been emerging as substitutes for natural enzymes to construct biosensors towards biomolecular detection. However, the detection of glutathione (GSH) by nanozyme-based biosensors still remains a great challenge for research on catalytic activity enhancement and the detection mechanism. In this work, Sb-doped iron oxychloride (Sb-FeOCl) with a well-defined nanorod-like structure is prepared by high-temperature calcination. Sb-FeOCl nanorods have high peroxidase-like activity, which can catalyze the decomposition of H₂O₂ into ·OH and then oxidize 3,3',5,5'-tetramethylbenzidine (TMB). In view of these intriguing observations, a reliable colorimetric method with a simple mixing and detection strategy is developed for the detection of GSH. The linear range of GSH detection is 1-36 μM. The detection limit of GSH reaches a low level of 0.495 μM (3σ/slope). The GSH sensing system also exhibits excellent specificity and anti-interference. Taking advantage of the advantages of the Sb-FeOCl nanorod-based biosensor, it can be used to quantitatively detect GSH levels in human serum. It can be anticipated that the Sb-FeOCl nanorods have broad prospects in the field of enzymatic biochemical reactions.

Unsaturated phospholipid modified FeOCl nanosheets for enhancing tumor ferroptosis

Iron-dependent accumulation of reactive oxygen species (ROS) and lipid peroxidation play key roles in ferroptosis, which has been an attractive strategy to kill tumor cells. However, the rapid annihilation of hydroxyl radicals (˙OH) produced from the Fenton reaction has become a major obstacle in inducing lipid peroxidation in cells. In this study, we develop a nano-delivery system of unsaturated phospholipid (Lip) and polyacrylic acid (PAA) functionalized FeOCl nanosheets (FeOCl@PAA-Lip). In this system, the ˙OH radicals produced from the Fenton reaction between FeOCl nanosheets and endogenous H₂O₂ of tumor cells attack Lip on the nanosheets in situ to initiate the lipid peroxidation chain reaction, which not only realizes free radical conversion but also leads to the amplification of ROS and lipid peroxides, thus enhancing tumor ferroptosis. The in vitro and in vivo results confirmed that FeOCl@PAA-Lip nanosheets exhibited specific tumor cell-killing effects, good biocompatibility, long circulation time, low side effects, high tumor targeting and an excellent tumor inhibition rate (73%). The Lip functionalization strategy offers a paradigm of enhancing ferroptosis treatment by conversion of ˙OH/phospholipid radicals/lipid peroxyl radicals and strengthening lipid peroxidation.

Peracetic acid integrated catalytic ceramic membrane filtration for enhanced membrane fouling control: Performance evaluation and mechanism analysis

Endowing ceramic membrane (CM) catalytic reactivity can enhance membrane fouling control in the aid of in situ oxidation process. Peracetic acid (PAA) oxidant holds great prospect to integrate with CM for membrane fouling control, owing to the prominent advantages of high oxidation efficacy and easy activation. Herein, this study, for the first time, presented a PAA/CM catalytic filtration system achieving highly-efficient protein fouling alleviation. A FeOCl functionalized CM (FeOCl-CM) was synthesized, possessing high hydrophilicity, low surface roughness, and highly-efficient activation towards PAA oxidation. Using bovine serum albumin (BSA) as the model protein foulant, the PAA/FeOCl-CM catalytic filtration notably alleviated fouling occurring in both membrane pores and surface, and halved the flux reduction degree as compared with the conventional CM filtration. The PAA/FeOCl-CM catalytic oxidation allows quick and complete disintegration of BSA particles, via the breakage of the amide I and II bands and the ring opening of the aromatic amino acids (e.g., Tryptophan, Tyrosine). In-depth investigation revealed that the in situ generated ^•OH and ¹O₂ were the key reactive species towards BSA degradation during catalytic filtration, while the organic radical oxidation and the direct electron transfer pathway from BSA to PAA via FeOCl-CM played minor roles. Overall, our findings highlight a new PAA/CM catalytic filtration strategy for achieving highly-efficient membrane fouling control and provide an understanding of the integrated PAA catalytic oxidation - membrane filtration behaviors.

Highly dispersed of Ag/AgCl nanoparticles on exfoliated FeOCl nanosheets as photo-Fenton catalysts for pollutants degradation via accelerating Fe(II)/Fe(III) cycle

In this work, Ag/AgCl/FeOCl (Ag-Fe) catalysts were successfully prepared via multistep routes in which Ag was uniformly anchored to the enriched Cl sites provided by exfoliated FeOCl nanosheets. Among these Ag-Fe catalysts, 5% Ag-Fe exhibited the highest pseudo first-order kinetic constant 0.1056 min^-1 for photo-Fenton degradation of Rhodamine B (RhB), which was 11 times higher than that of FeOCl (0.0096 min^-1). Ag-Fe catalysts exposed more coordinatively unsaturated Fe active sites to coordinate with H₂O₂ due to the cleavage of Fe-Cl bond. The exposed coordinatively unsaturated Fe(III) active sites could capture the photoinduced electrons and reduce them to Fe(II), which boosted the separation efficiency of photogenerated charge carriers. Meanwhile, the photogenerated electrons of Ag⁰ transferred to the FeOCl, promoting the reduction of Fe(III) to Fe(II). In addition, the intensified visible light adsorption (SPR effect) was achieved after introducing Ag/AgCl nanoparticles on exfoliated FeOCl. Hydroxyl radicals (·OH) and holes (h⁺) were determined as the main reactive oxidative species (ROS) in the photo-Fenton degradation process.

Speciation and release risk of heavy metals bonded on simulated naturally-aged microplastics prepared from artificially broken macroplastics

The negative impact of microplastics (MPs) act as metals vectors to environment and ecosystem have been paid more and more attention, and the accumulation risk of them to human body through the food chains and food webs needs to attract attention. In addition, the MPs bonded with heavy metals transport from river into the sea with high salinity may also have metals release risk. Herein, natural aged microplastics prepared from artificially broken macroplastics adsorbed with heavy metals accumulated from the natural environment were tested for their states and release risk in several simulated solution (NaCl and gastrointestinal solutions) to understand their effects on environment and human health. The adsorption capacity of different heavy metals on MPs was different during natural aging process proved by four-acid digestion method. Metals with high accumulation (including Pb, As, Cr, Mn, Ni, Zn, Co, Cu and Cd) on NAMPs were selected for further study. Results obtained via three-step extraction method showed that these heavy metals were mainly present as acid-extractable and reducible ions, which were characterized by high bioavailability. Release experiments suggested the notable Mn, Zn, As, Cr, Cu and Ni release in NaCl solution, and significant release of Mn, Zn, As, Cr, Cu, Pb and Ni in gastrointestinal solutions. The high metal release ratio in the simulated gastric solution was attributed to the weak binding of metal ions to NAMPs in acidic environment. This study will play a vital rule in assessing the ecological risks associated with MPs in natural environment.

2D graphene/FeOCl heterojunctions with enhanced tribology performance as a lubricant additive for liquid paraffin

The purpose of this study is to prepare graphene/FeOCl (G/FeOCl) heterojunctions via a microwave-pyrolysis approach and probe into the synergistic lubrication of G with FeOCl in liquid paraffin (LP). The morphology and chemical composition of specimens were analysed by utilizing scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) techniques. The tribological property of G/FeOCl was determined, and the interaction between the G/FeOCl heterojunction and friction pair was carried out through simulation calculations. The results indicated that neither G nor FeOCl significantly improved the lubrication performance of LP. However, together with FeOCl, G as lubrication additives greatly improved the lubrication performance of LP. Under the load of 1.648 GPa, the mean friction coefficient and wear scar diameter of LP containing 0.20 wt% G/FeOCl were 66.1% and 44.7% inferior to those of pure LP, respectively. Scanning electron microscopy (SEM) and elemental mapping analyses of worn scars revealed the formation of G/FeOCl layer tribofilms that prevent direct contact between metals. In addition, the high interfacial energy between graphene and FeOCl calculated based on first-principles density functional theory (DFT) further confirmed that graphene and FeOCl simultaneously form friction films with wear resistance and wear reduction effect at the friction interface, which is consistent with the experimental results. This study, therefore, provides a pathway for low-friction lubricants by deploying G/FeOCl two-dimensional material systems.

Graphene/FeOCl (G/FeOCl) heterojunctions were prepared by microwave-pyrolysis, thoroughly characterised and used to probe the synergistic lubrication of G with FeOCl in liquid paraffin. We provide a pathway for low-friction lubricants by deploying G/FeOCl 2D materials.

New FeOCl/graphene quantum dots catalyst for peroxymonosulfate activation to efficiently remove organic pollutants and inactivate Escherichia coli

The sulfate radical-based advanced oxidation processes (SR-AOPs) are well-established and efficient techniques for degradation of organic pollutants. Fe2+ is used as an environmentally friendly and cost-effective catalyst for activating peroxymonosulfate...

Cobalt doped iron oxychloride as efficient heterogeneous Fenton catalyst for degradation of paracetamol and phenacetin

Cobalt doped iron oxychloride (Co-FeOCl) was synthesized and employed as catalyst in Fenton degradation of paracetamol (APAP) and phenacetin (PNCT) for the first time. The catalytic performance was evaluated by means of various parameters including catalyst load, hydrogen peroxide (H₂O₂) dose and pH value. The high removal of APAP (87.5%) and PNCT (76.0%) was obtained under conditions of 0.2 g/L Co-FeOCl and 0.5 mM H₂O₂ at pH 7.0, with calculated pseudo-first order kinetic constants of 0.031 min^-1 for APAP and 0.023 min^-1 for PNCT. Particularly, quenching tests and in situ electron spin resonance (ESR) tests were employed for the identification of the reactive oxygen species (ROS) in system. Hydroxyl radical (·OH) and superoxide radical (O₂^-·) were the primary ROS in Co-FeOCl/H₂O₂ system. A possible mechanism for H₂O₂ activation by Co-FeOCl catalyst was proposed as well. Finally, the formation of typical disinfection by-products (DBPs) decreased slightly in Co-FeOCl/H₂O₂ pre-oxidation. However, stability and reusability of Co-FeOCl were deactivated in the consecutive three cycles.

In Situ Synthesis of FeOCl in Hollow Dendritic Mesoporous Organosilicon for Ascorbic Acid-Enhanced and MR Imaging-Guided Chemodynamic Therapy in Neutral pH Conditions

Chemodynamic therapy (CDT) based on the Fenton reaction is a promising strategy for nonlight cancer treatment. However, the traditional Fenton reaction is only efficient in strongly acidic conditions (pH = 2-4), resulting in the limited curative effect in a weakly acidic tumor microenvironment (TME). Herein, we first developed a simple in situ growth method to confine FeOCl nanosheets into hollow dendritic mesoporous organosilicon (H-DMOS) nanoparticles to obtain FeOCl@H-DMOS nanospheres. Ascorbic acid (AA) was then absorbed on the nanosystem as a H₂O₂ prodrug and, meanwhile, was used for the regeneration of Fentons reagent for Fe²⁺. Finally, poly(ethylene glycol) (PEG) was coated on FeOCl@H-DMOS-AA to enhance the permeability and retention (EPR) effect in tumor tissue. The as-fabricated FeOCl@H-DMOS-AA/PEG can generate a large amount of highly toxic hydroxyl radicals (^•OH) by catalyzing H₂O₂ even in neutral pH conditions with the help of AA. As a result, the effect of CDT has been markedly enhanced by the increased amount of H₂O₂ and the efficient Fenton reaction in mild acidic TME, which can remove almost all of the tumors in mice. In addition, FeOCl also endows the nanosystem with T₂-weighted MR imaging capability (r₂ = 34.08 mM^-1 s^-1), thus realizing the imaging-guided cancer therapy. All in all, our study may contribute a new direction and may have a bright future for enhanced CDT with a neutral pH range.

In situ oxidation and simultaneous adsorptive removal of Arsenite by layered double hydroxide based solid hydrogen peroxide

The improvement of oxidant can enhance the efficiency and enlarge the application range of Fenton process a lot. Herein, a high efficient layered double hydroxide (LDH) based solid hydrogen peroxide (LDHSHP) was designed, synthesized, and occupied as oxidant/adsorbent for the treatment of Arsenite (As(III)) in wastewaters. In LDHSHP, hydrogen peroxide was introduced in and connected to CO₃^2- interlayered, and the LDHSHP/Fe²⁺ system performed excellent in the range of pH 2.6-10.6. Hydroxyl radicals (·OH) played the main role in the oxidation of As(III), and the surface area of MgAl-LDH derived from LDHSHP was enlarged to about twice of that of LDHSHP. The increased surface area effectively promoted the adsorption of As(V). Almost 100 % of the obtained As(V) in water was immediately adsorptive removed. The adsorption capacity of LDHSHP derived MgAl-LDH for As(V) was detected to be 484.548 mg/g, and the adsorption fit the Langmuir model well and kinetic data was best described by the pseudo-second order model. The adsorption process was endothermic in the range of 298-308 K, while exothermic between 308 and 318 K. As(V) was calculated to be chemisorbed and reaction mechanism was proposed. LDHSHP is promising in the treatment of heavy metal-containing wastewaters.

Effect of Fe/Sn doping on the photocatalytic performance of multi-shelled ZnO microspheres: experimental and theoretical investigations

A series of multi-shelled Fe³⁺/Sn⁴⁺-doped ZnO microspheres were synthesized by calcining carbon microspheres as sacrificial templates.