Engineering Oxygen-Independent NADH Oxidase Integrated with Electrocatalytic FAD Cofactor Regeneration

An electrochemically mediated enzyme process for nicotinamide adenine dinucleotide (NADH) oxidation and biosensing has been developed in which the oxygen-dependent activities of wild-type NADH oxidase are replaced by electrochemical regeneration of the flavin adenine dinucleotide (FAD) cofactor in the active site. Consequently, the present bioelectrocatalysis does not rely on a continuous oxygen supply through bubbling air or pure oxygen in biosynthetic applications, which reduces enzyme stability. The coupled electrochemical and enzymatic catalysis is achieved through a combination of enzyme immobilization on the electrode and electrochemical oxidation of FADH2 in the active site mediated by the electron transfer mediator ferrocene carboxylic acid (FcCA). Furthermore, to minimize the effect of dissolved oxygen when the electrocatalytic process is exposed to air, we successfully designed mutations at the Leu40 and Cys42 sites of Leuconostoc mesenteroides (LmNOx) to block the oxygen passage into the active site and to eliminate the native FAD cofactor regeneration half-reaction. The engineered enzymes, whose activities are significantly reduced or inactive in solution, are electrocatalytically active toward conversion of NADH to NAD+, demonstrating successful FAD cofactor regeneration in the active site via electrochemistry. Finally, we developed two highly responsive electrochemical biosensors for NADH detection which has a superior substrate specific to standard detectors using metal electrodes, and comparable detection range and detection limit (1-3 μM).

Gastric stability of bare and chitosan-fabricated ferritin and its bio-mineral: implication for potential dietary iron supplements

Iron deficiency anaemia (IDA), the most widespread nutritional disorder, is a persistent global health issue affecting millions, especially in resource-limited geographies. Oral iron supplementation is usually the first choice for exogenous iron administration owing to its convenience, effectiveness and low cost. However, commercially available iron supplementations are often associated with oxidative stress, gastrointestinal side effects, infections and solubility issues. Herein, we aim to address these limitations by employing ferritin proteins-self-assembled nanocaged architectures functioning as a soluble cellular iron repository-as a non-toxic and biocompatible alternative. Our in vitro studies based on PAGE and TEM indicate that bare ferritin proteins are resistant to gastric conditions but their cage integrity is compromised under longer incubation periods and at higher concentrations of pepsin, which is a critical component of gastric juice. To ensure the safe delivery of encapsulated iron cargo, with minimal cage disintegration/degradation and iron leakage along the gastrointestinal tract, we fabricated the surface of ferritin with chitosan. Further, the stoichiometry and absorptivity of iron-chelator complexes at both gastric and circumneutral pH were estimated using Job's plot. Unlike bipyridyl, deferiprone exhibited pH dependency. In vitro kinetics was studied to evaluate iron release from bare and chitosan-fabricated ferritins employing both reductive (in the presence of ascorbate and bipyridyl) and non-reductive (direct chelation by deferiprone) pathways to determine their bio-mineral stabilities. Chitosan-decorated ferritin displayed superior cage integrity and iron retention capability over bare ferritin in simulated gastric fluid. The ability of ferritins to naturally facilitate controlled iron release in conjugation with enteric coating provided by chitosan may mitigate the aforementioned side effects and enhance iron absorption in the intestine. The results of the current study could pave the way for the development of an oral formulation based on ferritin-caged iron bio-mineral that can be a promising alternative for the treatment of IDA, offering better therapeutic outcomes.

Iron mobilization from intact ferritin: effect of differential redox activity of quinone derivatives with NADH/O2 and in situ-generated ROS

Ferritins are multimeric nanocage proteins that sequester/concentrate excess of free iron and catalytically synthesize a hydrated ferric oxyhydroxide bio-mineral. Besides functioning as the primary intracellular iron storehouses, these supramolecular assemblies also oversee the controlled release of iron to meet physiologic demands. By virtue of the reducing nature of the cytosol, reductive dissolution of ferritin-iron bio-mineral by physiologic reducing agents might be a probable pathway operating in vivo. Herein, to explore this reductive iron-release pathway, a series of quinone analogs differing in size, position/nature of substituents and redox potentials were employed to relay electrons from physiologic reducing agent, NADH, to the ferritin core. Quinones are well known natural electron/proton mediators capable of facilitating both 1/2 electron transfer processes and have been implicated in iron/nutrient acquisition in plants and energy transduction. Our findings on the structure-reactivity of quinone mediators highlight that iron release from ferritin is dictated by electron-relay capability (dependent on E1/2 values) of quinones, their molecular structure (i.e., the presence of iron-chelation sites and the propensity for H-bonding) and the type/amount of reactive oxygen species (ROS) they generate in situ. Juglone/Plumbagin released maximum iron due to their intermediate E1/2 values, presence of iron chelation sites, the ability to inhibit in situ generation of H2O2 and form intramolecular H-bonding (possibly promotes semiquinone formation). This study may strengthen our understanding of the ferritin-iron-release process and their significance in bioenergetics/O2-based cellular metabolism/toxicity while providing insights on microbial/plant iron acquisition and the dynamic host-pathogen interactions.

Iron Accumulation in Ferritin

Understanding the iron accumulation process in ferritin protein nanocages has remained a centerpiece in the field of iron biochemistry/biomineralization, which ultimately has implications in health and diseases. Although mechanistic differences of iron acquisition and mineralization exist in the superfamily of ferritins, we describe the techniques that can be used to investigate the accumulation of iron in all the ferritin proteins by in vitro iron mineralization process. In this chapter, we report that the non-denaturing polyacrylamide gel electrophoresis coupled with Prussian blue staining (in-gel assay) can be useful to investigate the iron-loading efficiency in ferritin protein nanocage, by estimating the relative amount of iron incorporated inside it. Similarly, the absolute size of the iron mineral core and the amount of total iron accumulated inside its nanocavity can be determined by using transmission electron microscopy and spectrophotometry, respectively.

Ferritin: A Promising Nanoreactor and Nanocarrier for Bionanotechnology

The essence of bionanotechnology lies in the application of nanotechnology/nanomaterials to solve the biological problems. Quantum dots and nanoparticles hold potential biomedical applications, but their inherent problems such as low solubility and associated toxicity due to their interactions at nonspecific target sites is a major concern. The self-assembled, thermostable, ferritin protein nanocages possessing natural iron scavenging ability have emerged as a potential solution to all the above-mentioned problems by acting as nanoreactor and nanocarrier. Ferritins, the cellular iron repositories, are hollow, spherical, symmetric multimeric protein nanocages, which sequester the excess of free Fe(II) and synthesize iron biominerals (Fe₂O₃·H₂O) inside their ∼5-8 nm central cavity. The electrostatics and dynamics of the pore residues not only drives the natural substrate Fe²⁺ inside ferritin nanocages but also uptakes a set of other metals ions/counterions during in vitro synthesis of nanomaterial. The current review aims to report the recent developments/understanding on ferritin structure (self-assembly, surface/pores electrostatics, metal ion binding sites) and chemistry occurring inside these supramolecular protein cages (protein mediated metal ion uptake and mineralization/nanoparticle formation) along with its surface modification to exploit them for various nanobiotechnological applications. Furthermore, a better understanding of ferritin self-assembly would be highly useful for optimizing the incorporation of nanomaterials via the disassembly/reassembly approach. Several studies have reported the successful engineering of these ferritin protein nanocages in order to utilize them as potential nanoreactor for synthesizing/incorporating nanoparticles and as nanocarrier for delivering imaging agents/drugs at cell specific target sites. Therefore, the combination of nanoscience (nanomaterials) and bioscience (ferritin protein) projects several benefits for various applications ranging from electronics to medicine.

Recent Advantages of Mediator Based Chemically Modified Electrodes; Powerful Approach in Electroanalytical Chemistry

Background:

Modified electrodes have advanced from the initial studies aimed at understanding electron transfer in films to applications in areas such as energy production and analytical chemistry. This review emphasizes the major classes of modified electrodes with mediators that are being explored for improving analytical methodology. Chemically modified electrodes (CMEs) have been widely used to counter the problems of poor sensitivity and selectivity faced in bare electrodes. We have briefly reviewed the organometallic and organic mediators that have been extensively employed to engineer adapted electrode surfaces for the detection of different compounds. Also, the characteristics of the materials that improve the electrocatalytic activity of the modified surfaces are discussed.

Objective:

Improvement and promotion of pragmatic CMEs have generated a diversity of novel and probable strong detection prospects for electroanalysis. While the capability of handling the chemical nature of the electrode/solution interface accurately and creatively increases , it is predictable that different mediators-based CMEs could be developed with electrocatalytic activity and completely new applications be advanced.

Alteration of Coaxial Heme Ligands Reveals the Role of Heme in Bacterioferritin from Mycobacterium tuberculosis

The uptake and utilization of iron remains critical for the survival/virulence of the host/pathogens in spite of the limitations (low bioavailability/high toxicity) associated with this nutrient. Both the host and pathogens manage to overcome these problems by utilizing the iron repository protein nanocages, ferritins, which not only sequester and detoxify the free Fe(II) ions but also decrease the iron solubility gap by synthesizing/encapsulating the Fe(III)-oxyhydroxide biomineral in its central hollow nanocavity. Bacterial pathogens including Mycobacterium tuberculosis (Mtb), the causative agent of tuberculosis, encode a distinct subclass of ferritins called bacterioferritin (BfrA), which binds heme, the versatile redox cofactor, via coaxial, conserved methionine (M52) residues at its subunit-dimer interfaces. However, the exact role of heme in Mtb BfrA remains yet to be established. Therefore, its coaxial ligands were altered via site-directed mutagenesis, which resulted in both heme-bound (M52C; ∼1 heme per cage) and heme-free (M52H and M52L) variants, indicating the importance of M52 residues as preferential heme binding axial ligands in Mtb BfrA. All these variants formed intact nanocages of similar size and iron-loading ability as that of wild-type (WT) Mtb BfrA. However, the as-isolated heme-bound variants (WT and M52C) exhibited enhanced protein stability and reductive iron mobilization as compared to their heme-free analogues (M52H and M52L). Further, increasing the heme content in BfrA variants by reconstitution not only enhanced the cage stability but also facilitated the iron mobilization, suggesting the role of heme. In contrary, heme altered the ferroxidase activity to a lesser extent despite facilitating the accumulation of the reactive intermediates formed during the course of the reaction. The current study suggests that heme in Mtb BfrA enhances the overall stability of the protein and possibly acts as an intrinsic electron relay station to influence the iron mineral dissolution and thus may be associated with Mtb's pathogenicity.

Designing a cross-linked redox network for a mediated enzyme-based electrode

A bio-conjugated redox network matrix based on glucose dehydrogenase, thionine (diamine-containing mediator), and poly(ethylene glycol) diglycidyl ether (crosslinker) is developed on a glassy carbon electrode through covalent bonding with one-pot crosslinking. Electrons from the enzyme diffuse through the network producing 400 μA cm-2 of glucose oxidation current at 25 °C.

Flavin-mediated reductive iron mobilization from frog M and Mycobacterial ferritins: impact of their size, charge and reactivities with NADH/O2

In vitro, reductive mobilization of ferritin iron using suitable electron transfer mediators has emerged as a possible mechanism to mimic the iron release process, in vivo. Nature uses flavins as electron relay molecules for important biological oxidation and oxygenation reactions. Therefore, the current work utilizes three flavin analogues: riboflavin (RF), flavin mononucleotide (FMN) and flavin adenine dinucleotide (FAD), which differ in size and charge but have similar redox potentials, to relay electron from nicotinamide adenine dinucleotide (NADH) to ferritin mineral core. Of these, the smallest/neutral analogue, RF, released more iron (~ three fold) in comparison to the larger and negatively charged FMN and FAD. Although iron mobilization got marred during the initial stages under aerobic conditions, but increased with a greater slope at the later stages of the reaction kinetics, which gets inhibited by superoxide dismutase, consistent with the generation of O2∙- in situ. The initial step, i.e., interaction of flavins with NADH played critical role in the iron release process. Overall, the flavin-mediated reductive iron mobilization from ferritins occurred via two competitive pathways, involving the reduced form of flavins either alone (anaerobic condition) or in combination with O2∙- intermediate (aerobic condition). Moreover, faster iron release was observed for ferritins from Mycobacterium tuberculosis than from bullfrog, indicating the importance of protein nanocage and the advantages they provide to the respective organisms. Therefore, these structure-reactivity studies of flavins with NADH/O2 holds significance in ferritin iron release, bioenergetics, O2-based cellular toxicity and may be potentially exploited in the treatment of methemoglobinemia. Smaller sized/neutral flavin analogue, riboflavin (RF) exhibits faster reactivity towards both NADH and O2 generating more amount of O2∙- and releases higher amount of iron from different ferritins, compared to its larger sized/negatively charged derivatives such as FMN and FAD.

Kinetics of Ferritin Self-Assembly by Laser Light Scattering: Impact of Subunit Concentration, pH, and Ionic Strength

Ferritins, the cellular iron repositories, are self-assembled, hollow spherical nanocage proteins composed of 24 subunits. The self-assembly process in ferritin generates the electrostatic gradient to rapidly sequester Fe(II) ions, thereby minimizing its toxicity (Fenton reaction). Although the factors that drive self-assembly and control its kinetics are little investigated, its inherent reversibility has been utilized for cellular imaging and targeted drug delivery. The current work tracks the kinetics of ferritin self-assembly by laser light scattering and investigates the factors that influence the process. The formation of partially structured subunit-monomers/dimers, at pH ≤ 1.5, serves as the starting material for the self-assembly, which upon increasing the pH exhibits biphasic behavior (a rapid assembly process coupled with subunit folding followed by a slower reassembly/reorganization process) and completes within 10 min. The ferritin self-assembly accelerated with subunit concentration and ionic strength (t_1/2 decreases in both the cases) but slowed down with the pH of the medium from 5.5 to 7.5 (t_1/2 increases). These findings would help to regulate the ferritin self-assembly to enhance the loading/unloading of drugs/nanomaterials for exploiting it as a nanocarrier and nanoreactor.

Development of a Sensitive Self-Powered Glucose Biosensor Based on an Enzymatic Biofuel Cell

Biofuel cells allow for constructing sensors that leverage the specificity of enzymes without the need for an external power source. In this work, we design a self-powered glucose sensor based on a biofuel cell. The redox enzymes glucose dehydrogenase (NAD-GDH), glucose oxidase (GOx), and horseradish peroxidase (HRP) were immobilized as biocatalysts on the electrodes, which were previously engineered using carbon nanostructures, including multi-wall carbon nanotubes (MWCNTs) and reduced graphene oxide (rGO). Additional polymers were also introduced to improve biocatalyst immobilization. The reported design offers three main advantages: (i) by using glucose as the substrate for the both anode and cathode, a more compact and robust design is enabled, (ii) the system operates under air-saturating conditions, with no need for gas purge, and (iii) the combination of carbon nanostructures and a multi-enzyme cascade maximizes the sensitivity of the biosensor. Our design allows the reliable detection of glucose in the range of 0.1-7.0 mM, which is perfectly suited for common biofluids and industrial food samples.