Advancements in emulsion systems for specialized infant formulas: Research process and formulation proposals for optimizing bioavailability of nutraceuticals

With the rapid advancements in nutrition and dietary management, infant formulas for special medical purposes (IFSMPs) have been developed to cater to the unique nutraceutical requirements of infants with specific medical conditions or physiological features. However, there are various challenges in effectively preserving and maximizing the health benefits of the specific nutraceuticals incorporated in IFSMPs. This review provides an overview of the nutritional compositions of various IFSMPs and highlights the challenges associated with the effective supplementation of specific nutraceuticals for infants. In addition, it emphasizes the promising potential of emulsion delivery systems, which possess both encapsulation and delivery features, to significantly improve the solubility, stability, oral acceptance, and bioavailability (BA) of nutraceutical bioactives. Based on this information, this work proposes detailed strategies for designing and developing model IFSMP emulsions to enhance the BA of specially required nutraceuticals. Key areas covered include emulsion stabilization, selective release mechanisms, and effective absorption of nutraceuticals. By following these proposals, researchers and industry professionals can design and optimize emulsion-based IFSMPs with enhanced health benefits. This review not only outlines the developmental states of IFSMP formulations but also identifies future research directions aimed at improving the physiological health benefits of IFSMPs. This effort lays the theoretical groundwork for the further development of emulsion-type IFSMP in infant formula (IF) industry, positioning the IF industry to better meet the complex needs of infants requiring specialized nutrition.

Long-term stable water-in-oil-in-water emulsion for effective protection and sustained release of lysine-calcium using chitosan and hydroxypropyl methyl cellulose

The poor tolerance to gastric acid and low absorption of calcium supplements in the intestinal tract remain a serious limitation in applications. Herein, lysine-calcium (Lys-Ca) has been synthesized via the chelation of Lys and high-temperature calcination scallop shell powder (HCSP), and subsequently encapsulated in a carefully designed water-in-oil-in-water (W/O/W) emulsion with a high encapsulation efficiency of 93 % using chitosan (CS) and hydroxypropyl methylcellulose (HPMC). Owing to the interfacial film formed by CS and HPMC between the droplets, the resulting emulsion demonstrates good acid and thermal stability, as well as long-term stability even after 60 d of storage at 25 °C. Meanwhile, the emulsion effectively protects the encapsulated Lys-Ca from damage in simulated gastric fluid (SGF). with only about 20 % Lys-Ca escaping into SGF (after 4 h). In simulated intestinal fluid (SIF), it sustainedly releases with a 61 % ratio at 1 h under the influence of bile salts and lipase, and near-complete release occurred after 6 h. Additionally, the emulsion presents no cytotoxicity and possesses appreciable calcium transport capacity. This work provides a well-designed double-emulsion strategy that offers a promising approach for developing efficient calcium supplements, aiming at improving the bioavailability of biomass calcium.

Co-encapsulation of collagen peptide and astaxanthin in WG/OG/W double emulsions-filled alginate hydrogel beads: Fabrication, characterization and digestion behaviors

The double emulsions-filled hydrogel beads delivery systems with controlled lipolysis and sustained-release property of co-encapsulated bioactive substances will be highly desired. Herein, the water-in-oil-in-water emulsion with gelled inner water phase and oil phase (WG/OG/W) filled hydrogel beads as a novel co-delivery system were developed with varied concentrations of rice bran wax and W/O emulsions to achieve effectively controlled release of lipolysis and nutraceuticals. Interestingly, the gelation of oil phase triggered by rice bran wax could enhance the storage stability of WG/OG/W emulsions due to the enhanced viscoelastic property. Increasing the mass fractions of W/O emulsions improved the stability of double emulsions due to increased viscosity and decreased particle size. Cryo-SEM observation showed that the double emulsion droplets were scattered in the three-dimensional network of alginate gel beads. Increased the addition of rice bran wax or W/O emulsions, the encapsulation efficiency of collagen peptide and astaxanthin was significantly improved. The in vitro digestion results indicated that increasing the concentrations of rice bran wax and W/O emulsion fractions in WG/OG/W emulsion-filled gel beads could effectively delay the release extent of free fatty acids and encapsulated nutraceuticals. The presence of rice bran wax contributed to increase the bioaccessibility of collagen peptide and astaxanthin.

Ultrasound-assisted multilayer Pickering emulsion fabricated by WPI-EGCG covalent conjugates for encapsulating probiotics in colon-targeted release

This study demonstrated the influences of ultrasound-assisted multilayer Pickering double emulsion capsules on the pasteurization and gastrointestinal digestive viability of probiotic (L. plantarum) strain liquid. Firstly, the role of ultrasonic homogenization on the morphology of W₁/O/W₂ double emulsions were studied. The double emulsion formed by ultrasonic intensity at 285 W had a single and narrow distribution with smallest droplet size. The double emulsion particles were then coated with chitosan(Chi), alginate (Alg), and CaCl₂(Ca). The multilayer emulsion after pasteurization and gastrointestinal digestion both had the highest viability at 5 coating layers, but its particle size (108.65 μm) exceeded the limit of human oral sensory (80 μm). It could be noted that the deposition of 3-4 layers of coating had similar activity after pasteurization/GIT digestion. And droplets with 3 layers of coating were the minimum and most available formulation for encapsulated probiotics (L. plantarum). Hence, the results suggest that the use of ultrasound-assisted multilayer emulsions encapsulated with probiotics in granular food and pharmaceutical applications is a promising strategy.

Polysaccharides, proteins, and their complex as microencapsulation carriers for delivery of probiotics: A review on carrier types and encapsulation techniques

Probiotics provide several benefits for humans, including restoring the balance of gut bacteria, boosting the immune system, and aiding in the management of certain conditions such as irritable bowel syndrome and lactose intolerance. However, the viability of probiotics may undergo a significant reduction during food storage and gastrointestinal transit, potentially hindering the realization of their health benefits. Microencapsulation techniques have been recognized as an effective way to improve the stability of probiotics during processing and storage and allow for their localization and slow release in intestine. Although, numerous techniques have been employed for the encapsulation of probiotics, the encapsulation techniques itself and carrier types are the main factors affecting the encapsulate effect. This work summarizes the applications of commonly used polysaccharides (alginate, starch, and chitosan), proteins (whey protein isolate, soy protein isolate, and zein) and its complex as the probiotics encapsulation materials; evaluates the evolutions in microencapsulation technologies and coating materials for probiotics, discusses their benefits and limitations, and provides directions for future research to improve targeted release of beneficial additives as well as microencapsulation techniques. This study provides a comprehensive reference for current knowledge pertaining to microencapsulation in probiotics processing and suggestions for best practices gleaned from the literature.

Effect of ultrasonic power on the stability of low-molecular-weight oyster peptides functional-nutrition W1/O/W2 double emulsion

Ultrasonic-assisted treatment is an eco-friendly and cost-effective emulsification method, and the acoustic cavitation effect produced by ultrasonic equipment is conducive to the formation of stable emulsion. However, its effect on the underlying stability of low-molecular-weight oyster peptides (LOPs) functional-nutrition W₁/O/W₂ double emulsion has not been reported. The effects of different ultrasonic power (50, 75, 100, 125, and 150 W) on the stability of double emulsions and the ability to mask the fishy odor of LOPs were investigated. Low ultrasonic power (50 W and 75 W) treatment failed to form a well-stabilized double emulsion, and excessive ultrasound treatment (150 W) destroyed its structure. At an ultrasonic power of 125 W, smaller particle-sized double emulsion was formed with more uniform distribution, more whiteness, and a lower viscosity coefficient. Meanwhile, the cavitation effect generated by 125 W ultrasonic power improved storage, and oxidative stabilities, emulsifying properties of double emulsion by reducing the droplet size and improved sensorial acceptability by masking the undesirable flavor of LOPs. The structure of the double emulsion was further confirmed by optical microscopy and confocal laser scanning microscopy. The ultrasonic-assisted treatment is of potential value for the industrial application of double emulsion in functional-nutrition foods.

Nanocarrier system: An emerging strategy for bioactive peptide delivery

Compared with small-molecule synthetic drugs, bioactive peptides have desirable advantages in efficiency, selectivity, safety, tolerance, and side effects, which are accepted by attracting extensive attention from researchers in food, medicine, and other fields. However, unacceptable barriers, including mucus barrier, digestive enzyme barrier, and epithelial barrier, cause the weakening or the loss of bioavailability and biostability of bioactive peptides. The nanocarrier system for bioactive peptide delivery needs to be further probed. We provide a comprehensive update on the application of versatile delivery systems for embedding bioactive peptides, including liposomes, polymer nanoparticles, polysaccharides, hydrogels, and self-emulsifying delivery systems, and further clarify their structural characterization, advantages, and disadvantages as delivery systems. It aims to provide a reference for the maximum utilization of bioactive peptides. It is expected to be an effective strategy for improving the bioavailability and biostability of bioactive peptides.

Novel glass capillary microfluidic devices for the flexible and simple production of multi-cored double emulsions

HYPOTHESIS

Double emulsions with many monodispersed internal droplets are required for the fabrication of multicompartment microcapsules and tissue-like synthetic materials. These double emulsions can also help to optically resolve different coalescence mechanisms contributing to double emulsion destabilization. Up to date microfluidic double emulsions are limited to either core-shell droplets or droplets with eight or less inner droplets. By applying a two-step jet break-up within one setup, double emulsion droplets filled with up to several hundred monodispersed inner droplets can be achieved.

EXPERIMENTS

Modular interconnected CNC-milled Lego®-inspired blocks were used to create two separated droplet break-up points within coaxial glass capillaries. Inner droplets were formed by countercurrent flow focusing within a small inner capillary, while outer droplets were formed by co-flow in an outer capillary. The size of inner and outer droplets was independently controlled since the two droplet break-up processes were decoupled.

FINDINGS

With the developed setup W/O/W and O/W/O double emulsions were produced with different surfactants, oils, and viscosity modifiers to encapsulate 25-400 inner droplets in each outer drop with a volume percentage of inner phase between 7% and 50%. From these emulsions monodispersed multicompartment microcapsules were obtained. The report offers insights on the relationship between the coalescence of internal droplets and their release.

Fabrication and characterization of double (W1/O/W2) emulsions loaded with bioactive peptide/polysaccharide complexes in the internal water (W1) phase for controllable release of bioactive peptide

The objective of this study was to develop food-grade double emulsions containing bioactive peptide (BP)/polysaccharide (P) complexes and to investigate their thermal stability (e.g., BP release) at different temperatures. The BP/P complexes were formed via electrostatic interactions, and successfully encapsulated into the internal water phase of double emulsions with different oil phases. All emulsions clearly showed temperature dependence during storage. BP/P complex-loaded double emulsions showed higher thermal stability and lower release of encapsulated BP (45 °C: < 1%, 65 °C: < 30%) over time, which effectively prevented BP release within the emulsion system. For the effect of the oil phase, the BP released from double emulsions was in the order of MCT > coconut > canola oil. Thus, we concluded that BP release can be controlled in double emulsions by differently charged polysaccharides and oil types and that BP/P-loaded double emulsions can be utilized as functional ingredients for developing heat-sensitive food products.

Fabrication of Novel Hierarchical Multicompartment Highly Stable Triple Emulsions for the Segregation and Protection of Multiple Cargos by Spatial Co-encapsulation

High-order multiple emulsions are of great interest in both fundamental research and industrial applications as vehicles for their encapsulation capability of actives. In this work, we report a hierarchically multicompartmental highly stable triple emulsion by emulsifying and assembling of natural Quillaja saponin. Water-in-oil-in-(oil-in-water) (W₂/O₂/(O₁/W₁)) triple emulsion indicates that the compartmented system consisted of surfaced saponin-coated nanodroplets (SNDs) and dispersed oil globules, which in turn contained smaller aqueous droplets. The effects of formulation parameters, including lipophilic emulsifier content, oil fraction, and SND concentration, on the formation of multiple emulsions were systematically investigated. The assembly into fibrillar network of SNDs at the outer oil-water interface effectively protected the triple emulsion droplets against flocculation and coalescence, and strongly prevented the osmotic-driven water diffusion between the internal water droplets and the external water phase, thus contributing to superior stability during 180 days storage. All of these characteristics make the multicompartmentalized emulsions suitable to co-encapsulate a hydrophilic bioactive (gardenia blue) and two hydrophobic bioactives (eapsanthin and curcumin) in a single emulsion droplet hierarchically for the segregation and protection of multiple cargos. This approach offers a promising route toward accessing the next generation of functional deliveries and encapsulation strategies.