Effect of chloride substitution on interfacial charge transfer processes in MAPbI3 perovskite thin film solar cells: planar versus mesoporous

Advances in chloride additives for high-efficiency perovskite solar cells: multiple points of view

Chloride (Cl) additives are rather effective in improving the performance of perovskite solar cells (PSCs) through the modulation of crystallization process and surface morphology. After incorporating Cl-containing additives, the optoelectrical properties of perovskite films, such as the electron/hole diffusion length and carrier lifetime, are greatly enhanced. However, only a trace amount of Cl has been identified in the resultant perovskite film, and the mechanism of efficiency improvement induced by Cl remains unclear. In this review, we discuss organic and inorganic Cl additives systematically from the perspective of their solubility, volatility, cation size and chemical groups. In addition, the roles of residual Cl anions and cations are analyzed in detail. Finally, some valuable future perspectives of Cl additives are proposed.

Chlorides, other Halides, and Pseudo-Halides as Additives for the Fabrication of Efficient and Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) are attracting a tremendous attention from the scientific community due to their excellent power conversion efficiency, low cost, and great promise for the future of solar energy. The best PSCs have already achieved a certified power conversion efficiency (PCE) of 25.5 % after an unprecedented rapid performance rise. However, high requirements with respect to large area, high-efficiency devices, and stability are still the challenges. Major efforts, especially for achieving a high degree of chemical control, have been made to reach these targets. The use of halide additives has played a critical role in improving the efficiency and stability. The present paper reviews the important breakthroughs in PSC technologies made by using halide additives, especially chloride, and pseudo-halide additives for the preparation of the perovskite layers, other layers, and interfaces of the devices. These additives help perovskite (PVK) crystallization and layer morphology control, grain boundary reduction, bulk and interface defects passivation, and so on. Normally, these halide additives play different roles depending on their categories and their location. Herein, recent progresses made due to additives employment in every possible layer of PSCs are reviewed, with focus on chloride, other halides, and pseudo-halides as additives in PVK films, halide additives in carrier transport layers, and at PVK-contact interfaces. Finally, an outlook of engineering of these additives in PSC progress is given.

Influence of Chloride/Iodide Ratio in MAPbI3-xClx Perovskite Solar Devices: Case of Low Temperature Processable AZO Sub-Layer

A significant current challenge for perovskite solar technology is succeeding in designing devices all by low temperature processes. This could help for both rigid devices industrialisation and flexible devices development. The depositions of nanoparticles from colloidal suspensions consequently emerge as attractive approaches, especially due to their potential for low temperature curing not only for the photoactive perovskite layer but also for charge transporting layers. Here, NIP solar cells based on aluminium doped zinc oxide (AZO) electron transport layer were fabricated using a low temperature compatible process for AZO deposition. For the extensively studied perovskites based on methylammonium lead halides (MAPbI3-xClx), the chloride/iodide equation is widely proposed to follow an optimal value corresponding to an introduced MAI:PbCl2 ratio of 3:1. However, the perovskite formulation should be considered as a key parameter for the optimization of power conversion efficiency when exploring new perovskite sub-layers. We here propose a systematic method for the structural determination of the optimal ratio. It may depend on the sublayer and results from structural changes around the optimal value. The functional properties gradually increase with the addition of chlorine as long as it remains intercalated in a single phase. Above the optimal ratio, the appearance of two phases degrades the system.

Interfacial and structural modifications in perovskite solar cells

The rapid and continuous progress made in perovskite solar cell (PSC) technology has drawn considerable attention from the photovoltaic research community, and the application of perovskites in other electronic devices (such as photodetectors, light-emitting diodes, and batteries) has become imminent. Because of the diversity in device configurations, optimization of film deposition, and exploration of material systems, the power conversion efficiency (PCE) of PSCs has been certified to be as high as 25.2%, making this type of solar cells the fastest advancing technology until now. As demonstrated by researchers worldwide, controlling the morphology and defects in perovskite films is essential for attaining high-performance PSCs. In this regard, interface engineering has proven to be a very efficient way to address these issues, obtaining better charge collection efficiency, and reducing recombination losses. In this review, the interfacial modification between perovskite films and charge-transport layers (CTLs) as well as CTLs and electrodes of PSCs has been widely summarized. Grain boundary (GB) engineering and stress engineering are also included since they are closely related to the improvement in device performance and stability.

High performance perovskite solar cells using Cu9S5 supraparticles incorporated hole transport layers

We disclose novel photovoltaic device physics and present details of device mechanisms by investigating perovskite solar cells (PSCs) incorporating Cu₉S₅@SiO₂ supraparticles (SUPs) into Spiro-OMeTAD based hole transport layers (HTLs). High quality colloidal Cu₉S₅ nanocrystals (NCs) were prepared using a hot-injection approach. Multiple Cu₉S₅ NCs were further embedded in silica to construct a Cu₉S₅@SiO₂ SUP. Cu₉S₅@SiO₂ SUPs were blended into Spiro-OMeTAD based HTLs with different weight ratios. Theoretical and experimental results show that the very strong light scattering or reflecting properties of Cu₉S₅@SiO₂ SUPs blended in the PSC device in a proper proportion distribute to increase the light energy trapped within the device, leading to significant enhancement of light absorption in the active layer. Additionally, the incorporated Cu₉S₅@SiO₂ SUPs can also promote the electrical conductivity and hole-transport capacity of the HTL. Significantly larger conductivity and higher hole injection efficiency were demonstrated in the HTM with the optimal weight ratios of Cu₉S₅@SiO₂ SUPs. As a result, efficient Cu₉S₅ SUPs based PSC devices were obtained with average power conversion efficiency (PCE) of 18.21% at an optimal weight ratio of Cu₉S₅ SUPs. Compared with PSC solar cells without Cu₉S₅@SiO₂ SUPs (of which the average PCE is 14.38%), a remarkable enhancement over 26% in average PCE was achieved. This study provides an innovative approach to efficiently promote the performance of PSC devices by employing optically stable, low-cost and green p-type semiconductor SUPs.