Superaerophilic copper nanowires for efficient and switchable CO2 electroreduction

Glassy State Hydroxide Materials for Oxygen Evolution Electrocatalysis

Hydroxides are the archetype of layered crystals with metal-oxygen (M-O) octahedron units, which have been widely investigated as oxygen evolution reaction (OER) catalysts. However, the better crystallinity of hydroxide materials, the more perfect octahedral symmetry and atomic ordering, resulting in the less exposed metal sites and limited electrocatalytic activity. Herein, a glassy state hydroxide material featuring with short-range order and long-range disorder structure is developed to achieve high intrinsic activity for OER. Specifically, a rapid freezing point precipitation method is utilized to fabricate amorphous multi-component hydroxide. Owing to the freezing-point crystallization environment and chaotic M-O (M = Ni/Fe/Co/Mn/Cr etc.) structures, the as-fabricated NiFeCoMnCr hydroxide exhibit a highly-disordered glassy structure, as-confirmed by X-ray/electron diffraction, enthalpic response, and pair distribution function analysis. The as-achieved glassy-state hydroxide materials display a low OER overpotential of 269 mV at 20 mA cm-2 with a small Tafel slope of 33.3 mV dec-1 , outperform the benchmark noble-metal RuO2 catalyst (341 mV, 84.9 mV dec-1 ) . Operando Raman and density functional theory studies reveal that the glassy state hydroxide converted into disordered active oxyhydroxide phase with optimized oxygen intermediates adsorption under low OER overpotentials, thus boosting the intrinsic electrocatalytic activity.

Bioinspired Hydrophobicity for Enhancing Electrochemical CO2 Reduction

Electrochemical carbon dioxide reduction (CO2 R) is a promising pathway for converting greenhouse gasses into valuable fuels and chemicals using intermittent renewable energy. Enormous efforts have been invested in developing and designing CO2 R electrocatalysts suitable for industrial applications at accelerated reaction rates. The microenvironment, specifically the local CO2 concentration (local [CO2 ]) as well as the water and ion transport at the CO2 -electrolyte-catalyst interface, also significantly impacts the current density, Faradaic efficiency (FE), and operation stability. In nature, hydrophobic surfaces of aquatic arachnids trap appreciable amounts of gases due to the "plastron effect", which could inspire the reliable design of CO2 R catalysts and devices to enrich gaseous CO2 . In this review, starting from the wettability modulation, we summarize CO2 enrichment strategies to enhance CO2 R. To begin, superwettability systems in nature and their inspiration for concentrating CO2 in CO2 R are described and discussed. Moreover, other CO2 enrichment strategies, compatible with the hydrophobicity modulation, are explored from the perspectives of catalysts, electrolytes, and electrolyzers, respectively. Finally, a perspective on the future development of CO2 enrichment strategies is provided. We envision that this review could provide new guidance for further developments of CO2 R toward practical applications.

Copper and silver nanowires for CO2 electroreduction

Copper and silver nanowires have been extensively investigated as the next generation of transparent conductive electrodes (TCEs) due to their ability to form percolating networks. Recently, they have been exploited as electrocatalysts for CO2 reduction. In this review, we present the most recent advances in this field summarizing different strategies used for the synthesis and functionalization/activation of copper and silver nanowires, as well as, the state of the art of their electrochemical performance with particular emphasis on the effect of the nanowire morphology. Novel perspectives for the development of highly efficient, selective, and stable electrocatalysts for CO2 reduction arise from the translation of NW-based TCEs in this challenging field.

Substituting inert phosphate with redox-active silicate towards advanced polyanion-type cathode materials for sodium-ion batteries

Polyanion-type phosphate materials with Na-super-ionic conductor structures are promising for next-generation sodium-ion battery cathodes, although the intrinsically low electroconductivity and limited energy density have restricted their practical applications. In this study, we put forward substituting an inert phosphate with a redox-active silicate to improve the energy density and intrinsic electroconductivity of polyanion-type phosphate materials, thus enabling an advance in sodium-ion battery cathodes. As a proof of concept, some of the phosphate of Na₃V₂(PO₄)₃ was replaced by silicate to fabricate Na₃V₂(PO₄)_2.9(SiO₄)_0.1, which exhibited a higher average discharge voltage of 3.36 V and a higher capacity of 115.8 mA h g^-1 than pristine Na₃V₂(PO₄)₃ (3.31 V, 109.6 mA h g^-1) at 0.5 C, therefore improving the energy density. Moreover, the introduced silicate enhanced the intrinsic electroconductivity of Na₃V₂(PO₄)₃ materials, as confirmed by both theoretical simulation and electrochemical measurements. After pairing with a commercial hard carbon anode, the optimized Na₃V₂(PO₄)_2.9(SiO₄)_0.1 cathode enabled a stable-cycling full cell with 90.1% capacity retention after 300 cycles at 5 C and a remarkable average coulombic efficiency of 99.88%.

Alloying strategies for tuning product selectivity during electrochemical CO2 reduction over Cu

Excessive reliance on fossil fuels has led to the release and accumulation of large quantities of CO₂ into the atmosphere which has raised serious concerns related to environmental pollution and global warming. One way to mitigate this problem is to electrochemically recycle CO₂ to value-added chemicals or fuels using electricity from renewable energy sources. Cu is the only metallic electrocatalyst that has been shown to produce a wide range of industrially important chemicals at appreciable rates. However, low product selectivity is a fundamental issue limiting commercial applications of electrochemical CO₂ reduction over Cu catalysts. Combining copper with other metals that actively contribute to the electrochemical CO₂ reduction reaction process can selectively facilitate generation of desirable products. Alloying Cu can alter surface binding strength through electronic and geometric effects, enhancing the availability of surface confined carbon species, and stabilising key reduction intermediates. As a result, significant research has been undertaken to design and fabricate copper-based alloy catalysts with structures that can enhance the selectivity of targeted products. In this article, progress with use of alloying strategies for development of Cu-alloy catalysts are reviewed. Challenges in achieving high selectivity and possible future directions for development of new copper-based alloy catalysts are considered.

Emerging Separation Applications of Surface Superwettability

Human beings are facing severe global environmental problems and sustainable development problems. Effective separation technology plays an essential role in solving these challenges. In the past decades, superwettability (e.g., superhydrophobicity and underwater superoleophobicity) has succeeded in achieving oil/water separation. The mixture of oil and water is just the tip of the iceberg of the mixtures that need to be separated, so the wettability-based separation strategy should be extended to treat other kinds of liquid/liquid or liquid/gas mixtures. This review aims at generalizing the approach of the well-developed oil/water separation to separate various multiphase mixtures based on the surface superwettability. Superhydrophobic and even superoleophobic surface microstructures have liquid-repellent properties, making different liquids keep away from them. Inspired by the process of oil/water separation, liquid polymers can be separated from water by using underwater superpolymphobic materials. Meanwhile, the underwater superaerophobic and superaerophilic porous materials are successfully used to collect or remove gas bubbles in a liquid, thus achieving liquid/gas separation. We believe that the diversified wettability-based separation methods can be potentially applied in industrial manufacture, energy use, environmental protection, agricultural production, and so on.

Precursor film formation on catalyst–electrolyte–gas boundaries during CO2 electroreduction with gas diffusion electrodes

Thin and long layers of catholyte precursor films spread near triple-phase boundaries on composite catalysts containing hydrophobic materials. Dissolved CO2 molecules in the precursor films reduce on the composite catalyst surface without depletion.

Wetting-regulated gas-involving (photo)electrocatalysis: biomimetics in energy conversion

(Photo)electrolysis of water or gases with water to species serving as industrial feedstocks and energy carriers, such as hydrogen, ammonia, ethylene, propanol, etc., has drawn tremendous attention. Moreover, these processes can often be driven by renewable energy under ambient conditions as a sustainable alternative to traditional high-temperature and high-pressure synthesis methods. In addition to the extensive studies on catalyst development, increasing attention has been paid to the regulation of gas transport/diffusion behaviors during gas-involving (photo)electrocatalytic reactions towards the goal of creating industrially viable catalytic systems with high reaction rates, excellent long-term stabilities and near-unity selectivities. Biomimetic surfaces and systems with special wetting capabilities and structural advantages can shed light on the future design of (photo)electrodes and address long-standing challenges. This article is dedicated to bridging the fields of wetting and catalysis by reviewing the cutting-edge design methodologies of both gas-evolving and gas-consuming (photo)electrocatalytic systems. We first introduce the fundamentals of various in-air/underwater wetting states and their corresponding bioinspired structural properties. The relationship amongst the bubble transport behavior, wettability, and porosity/tortuosity is also discussed. Next, the latest implementations of wetting-related design principles for gas-evolving reactions (i.e. the hydrogen evolution reaction and oxygen evolution reaction) and gas-consuming reactions (i.e. the oxygen reduction reaction and CO2 reduction reaction) are summarized. For photoelectrode designs, additional factors are taken into account, such as light absorption and the separation, transport and recombination of photoinduced electrons and holes. The influences of wettability and 3D structuring of (photo)electrodes on the catalytic activity, stability and selectivity are analyzed to reveal the underlying mechanisms. Finally, remaining questions and related future perspectives are outlined.

Recent Advancement of Emerging Nano Copper-Based Printable Flexible Hybrid Electronics

Printed copper materials have been attracting significant attention prominently due to their electric, mechanical, and thermal properties. The emerging copper-based flexible electronics and energy-critical applications rely on the control of electric conductivity, current-carrying capacity, and reliability of copper nanostructures and their printable ink materials. In this review, we describe the growth of copper nanostructures as the building blocks for printable ink materials on which a variety of conductive features can be additively manufactured to achieve high electric conductivity and stability. Accordingly, the copper-based flexible hybrid electronics and energy-critical devices printed by different printing techniques are reviewed for emerging applications.

Electrocatalysis for CO2 conversion: from fundamentals to value-added products

This timely and comprehensive review mainly summarizes advances in heterogeneous electroreduction of CO₂: from fundamentals to value-added products.

Formate-Selective CO2 Electrochemical Reduction with a Hydrogen-Reduction-Suppressing Bronze Alloy Hollow-Fiber Electrode

Electroreduction carbon dioxide into formate has been regarded as a hopeful measure to relieve global warming. Copper-based hollow fibers demonstrated good performances on converting carbon dioxide in previous researches. Herein Cu-Sn alloy hollow fibers were synthesized in an innovative way, combining the structure advantages of hollow fiber and high selectivity towards formate on η' bronze. Tests under different gas injection conditions were conducted to analyze the contribution of the hollow fiber structure on suppression of hydrogen evolution and promotion on kinetics. Strikingly, Cu-Sn_45 % hollow fiber, the optimal catalyst in this work, achieved a highest faradaic efficiency towards formate of 90.96 % at a lower potential of -0.75 V vs. RHE than most non-noble catalysts, and the FE of H₂ was below 4 %.

Electrode Materials Engineering in Electrocatalytic CO2 Reduction: Energy Input and Conversion Efficiency

Electrocatalytic CO₂ reduction (ECR) is a promising technology to simultaneously alleviate CO₂ -caused climate hazards and ever-increasing energy demands, as it can utilize CO₂ in the atmosphere to provide the required feedstocks for industrial production and daily life. In recent years, substantial progress in ECR systems has been achieved by the exploitation of various novel electrode materials. The anodic materials and cathodic catalysts that have, respectively, led to high-efficiency energy input and effective heterogenous catalytic conversion in ECR systems are comprehensively reviewed. Based on the differences in the nature of energy sources and the role of materials used at the anode, the fundamentals of ECR systems, including photo-anode-assisted ECR systems and bio-anode-assisted ECR systems, are explained in detail. Additionally, the cathodic reaction mechanisms and pathways of ECR are described along with a discussion of different design strategies for cathode catalysts to enhance conversion efficiency and selectivity. The emerging challenges and some perspective on both anode materials and cathodic catalysts are also outlined for better development of ECR systems.

Wettability of graphene: from influencing factors and reversible conversions to potential applications

As a member of the carbon material family, graphene has long been the focus of research on account of its abundant excellent properties. Nevertheless, many previous research works have attached much importance to its mechanical capacity and electrical properties, and not to its surface wetting properties with respect to water. In this review, a series of methods are put forward for characterization of the water contact angle of graphene, such as experimental measurements, classic molecular dynamics simulations, and formula calculations. A series of factors that affect the wettability of graphene, including defects, controllable atmosphere, doping, and electric field, are also discussed in detail, and have rarely have been covered in other review articles before. Finally, with the developments of smart surfaces, a reversible wettability variation of graphene from hydrophobic to hydrophilic is important in the presence of external stimulation and is discussed in detail herein. It is anticipated that graphene could serve as a tunable wettability coating for further developments in electronic devices and brings a new perspective to the construction of smart material surfaces.