Novel thiazolopyridine derivatives of diflapolin as dual sEH/FLAP inhibitors with improved solubility

Inflammatory responses are orchestrated by a plethora of lipid mediators, and perturbations of their biosynthesis or degradation hinder resolution and lead to uncontrolled inflammation, which contributes to diverse pathologies. Small molecules that induce a switch from pro-inflammatory to anti-inflammatory lipid mediators are considered valuable for the treatment of chronic inflammatory diseases. Commonly used non-steroidal anti-inflammatory drugs (NSAIDs) are afflicted with side effects caused by the inhibition of beneficial prostanoid formation and redirection of arachidonic acid (AA) into alternative pathways. Multi-target inhibitors like diflapolin, the first dual inhibitor of soluble epoxide hydrolase (sEH) and 5-lipoxygenase-activating protein (FLAP), promise improved efficacy and safety but are confronted by poor solubility and bioavailability. Four series of derivatives bearing isomeric thiazolopyridines as bioisosteric replacement of the benzothiazole core and two series additionally containing mono- or diaza-isosteres of the phenylene spacer were designed and synthesized to improve solubility. The combination of thiazolo[5,4-b]pyridine, a pyridinylen spacer and a 3,5-Cl2-substituted terminal phenyl ring (46a) enhances solubility and FLAP antagonism, while preserving sEH inhibition. Moreover, the thiazolo[4,5-c]pyridine derivative 41b, although being a less potent sEH/FLAP inhibitor, additionally decreases thromboxane production in activated human peripheral blood mononuclear cells. We conclude that the introduction of nitrogen, depending on the position, not only enhances solubility and FLAP antagonism (46a), but also represents a valid strategy to expand the scope of application towards inhibition of thromboxane biosynthesis.

A Fluorescent and Colorimetric Chemosensor Detecting Pd2+ Based on Chalcone Structure with Triphenylamine

A fluorometric and colorimetric chemosensor DiPP ((E)-3-(4-(diphenylamino)phenyl)-1-(pyridin-2-yl)prop-2-en-1-one) based on chalcone structure with a triphenylamine group was synthesized. Sensor DiPP detected Pd2+ with fluorescence turn-off and via colorimetry variation of yellow to purple. The binding ratio of DiPP to Pd2+ turned out to be 1 : 1. Detection limits for Pd2+ by DiPP were analyzed to be 0.67 µM and 0.80 µM through the fluorescent and colorimetric methods. Additionally, the fluorescent and colorimetric test strips were applied for probing Pd2+ and displayed that DiPP could obviously discriminate Pd2+ from other metals. The binding feature of DiPP to Pd2+ was presented by ESI-mass, Job plot, NMR titration, ESI-mass, and DFT calculations.

A pyridine dicarboxylate based hydrazone Schiff base for reversible colorimetric recognition of Ni2+ and PPi

A pyridine dicarboxylate Schiff-base DAS was synthesized for cascade colorimetric recognition of Ni²⁺ and PPi. The selectivity and sensitivity of chemosensor DAS was investigated through colorimetric and UV-vis studies in MeOH-PBS (5 : 1, v/v, pH = 7.4). The chemosensor formed a 2 : 1 complex with Ni²⁺ metal ions with a binding constant of K_a = 3.07 × 10³ M^-2. Besides, a plausible sensing mechanism is confirmed by single crystal X-ray diffraction (SC-XRD), Job's plot and Benesi-Hildebrand plot (B-H plot) experiments. Furthermore, the DAS-Ni²⁺ ensemble formed 'in situ' was used to selectively recognise PPi. The limit of detection (LOD) of DAS for Ni²⁺ was found to be 0.14 μM and that of the DAS-Ni²⁺ ensemble for PPi was found to be 0.33 μM. Also, the potential of the chemosensor has been applied for solid state detection of Ni²⁺ as well as to mimic the 'INHIBIT' logic gate on the addition of Ni²⁺ ions and PPi.

Metal-Free Synthesis of Functionalized Quinolines from 2-Styrylanilines and 2-Methylbenzothiazoles/2-Methylquinolines

A facile functionalization of C(sp³)-H bonds and tandem cyclization strategy to synthesize quinoline derivatives from 2-methylbenzothiazoles or 2-methylquinolines and 2-styrylanilines has been developed. This work avoids the requirement for transition metals, offering a mild approach to activation of C(sp³)-H bonds and formation of new C-C and C-N bonds. This strategy features excellent functional group tolerance and scaled-up synthetic capability, thus providing an efficient and environmentally friendly access to medicinally valuable quinolines.

Mitochondria targeted dual-fluorescent probe for bio-imaging viscosity and F- with different fluorescence signals

The F^- ion and viscosity both affect the physiological state of mitochondria and to the best of our knowledge no fluorescent probe is reported for the dual detection of mitochondrial viscosity and F^- ion through different signals. DMAS-Si is weakly red fluorescent due to free intramolecular rotation between dimethylaminophenyl and pyridinium moieties and PET from silyloxy to the pyridinium moiety. In viscous medium (glycerol 90 %), the rotation is restricted and 18-fold increase in red-fluorescence (λ_em 637 nm) is observed. On reaction with F^- ion, the desilylations followed by release of quinone-methide from DMAS-Si gives intense green fluorescence (λ_em 515 nm) due to formation of DMAS. DMAS-Si can detect as low as 50 nM F^-. DMAS-Si shows good permeability to HeLa cells and preferably targets mitochondria. It has been used for imaging of increased viscosity in mitochondria of HeLa cells in the presence of nystatin through red fluorescence and exogenous F^- ion by appearance of green fluorescence.

Medicinal Importance and Chemosensing Applications of Pyridine Derivatives: A Review

Pyridine derivatives are the most common and significant heterocyclic compounds, which play an important role in various fields ranging from medicinal to chemosensing applications. Pyridine derivatives possess different biological activities such as antifungal, antibacterial, antioxidant, antiglycation, analgesic, antiparkinsonian, anticonvulsant, anti-inflammatory, ulcerogenic, antiviral, and anticancer activity. Furthermore, these derivatives have a high affinity for various ions and neutral species and can be used as a highly effective chemosensor for the determination of different species. In this review article, generally used synthetic routes of pyridine, structural characterization, medicinal applications, and potential of pyridine derivatives in analytical chemistry as chemosensors have been discussed. We hope this study will support the new thoughts to design biological active compounds and highly selective and effective chemosensors for the detection of various species (anions, cations, and neutral species) in various samples (environmental, agricultural, and biological). [Figure: see text].

Pyranopyrazole based Schiff base for rapid colorimetric detection of arginine in aqueous and real samples

A novel pyranopyrazole-based Schiff base PPS has been synthesized via a condensation reaction between aldehyde and hydrazide derivatives of pyranopyrazole.

Strategic Design of a 2,6-Disubstituted Pyridine-based Probe having Hard-Soft Centers: Responsive Divergence from One Core

Alkyne is a versatile functional group in organic chemistry, and is able to undergo a wide variety of reactions and interactions. Featuring a reactive functional group, alkyne participates in many...

Selective sensing of adenosine monophosphate (AMP) by a calix[6]triazolium-based colorimetric sensing ensemble

A calix[6]triazolium-based colorimetric sensing ensemble has been developed that exhibits a distinct color change in the presence of AMP.

A prototype device of microliter volume voltammetric pH sensor based on carbazole-quinone redox-probe tethered MWCNT modified three-in-one screen-printed electrode

As an alternate for the conventional glass-based pH sensor which is associated with problems like fragile nature, alkaline error, and potential drift, the development of a new redox-sensitive pH probe-modified electrode that could show potential, current-drift and surface-fouling free voltammetric pH sensing is a demanding research interest, recently. Herein, we report a substituted carbazole-quinone (Car-HQ) based new redox-active pH-sensitive probe that contains benzyl and bromo-substituents, immobilized multiwalled carbon nanotube modified glassy carbon (GCE/MWCNT@Car-HQ) and screen-printed three-in-one (SPE/MWCNT@Car-HQ) electrodes for selective, surface-fouling free pH sensor application. This new system showed a well-defined surface-confined redox peak at an apparent standard electrode potential, Eo' = - 0.160 V versus Ag/AgCl with surface-excess value, Γ = 47 n mol cm-2 in pH 7 phosphate buffer solution. When tested with various electroactive chemicals and biochemicals such as cysteine, hydrazine, NADH, uric acid, and ascorbic acid, MWCNT@Car-HQ showed an unaltered redox-peak potential and current values without mediated oxidation/reduction behavior unlike the conventional hydroquinone, anthraquinone and other redox mediators based voltammetry sensors with serious electrocatalytic effects and in turn potential and current drifts. A strong π-π interaction, nitrogen-atom assisted surface orientation and C-C bond formation on the graphitic structure of MWCNT are the plausible reasons for stable and selective voltammetric pH sensing application of MWCNT@Car-HQ system. Using a programed/in-built three-in-one screen printed compatible potentiostat system, voltammetric pH sensing of 3 μL sample of urine, saliva, and orange juice samples with pH values comparable to that of milliliter volume-based pH-glass electrode measurements has been demonstrated.

Highly Sensitive and Selective Spiropyran-Based Sensor for Copper(II) Quantification

The metal-binding capabilities of the spiropyran family of molecular switches have been explored for several purposes from sensing to optical circuits. Metal-selective sensing has been of great interest for applications ranging from environmental assays to industrial quality control, but sensitive metal detection for field-based assays has been elusive. In this work, we demonstrate colorimetric copper sensing at low micromolar levels. Dimethylamine-functionalized spiropyran (SP1) was synthesized and its metal-sensing properties were investigated using UV-vis spectrophotometry. The formation of a metal complex between SP1 and Cu²⁺ was associated with a color change that can be observed by the naked eye as low as ≈6 μM and the limit of detection was found to be 0.11 μM via UV-vis spectrometry. Colorimetric data showed linearity of response in a physiologically relevant range (0-20 μM Cu²⁺) with high selectivity for Cu²⁺ ions over biologically and environmentally relevant metals such as Na⁺, K⁺, Mn²⁺, Ca²⁺, Zn²⁺, Co²⁺, Mg²⁺, Ni²⁺, Fe³⁺, Cd²⁺, and Pb²⁺. Since the color change accompanying SP1-Cu²⁺ complex formation could be detected at low micromolar concentrations, SP1 could be viable for field testing of trace Cu²⁺ ions.

Development of a method for the detection of Cu2+ in the environment and live cells using a synthesized spider web-like fluorescent probe

A macrocyclic Schiff base fluorescent probe [1,2-phenylenediamine-2,6-pyridinedialdehyde macrocyclic Schiff base] (BP-MSB) based on 2,6-pyridinedialdehyde was synthesized for use in the detection of Cu²⁺ in environmental water samples and live cells imaging by the method of specific recognition. The free fluorescent probe BP-MSB shows strong fluorescence in DMSO/H₂O. The probe shows high sensitivity and selectivity for Cu²⁺ through "turn-off" fluorescence response in DMSO/H₂O buffer solution (pH = 6.5), with a detection limit of 0.83 nM, which is far below the maximum allowable drinking water content of 20.0 μM specified by the US Environmental Protection Agency. The BP-MSB fluorescence quenching method was used for the determination of Cu²⁺ in Xiang Jiang water samples and tap-water. Furthermore, addition of the same number of moles of ethylene diamine tetraacetic acid (EDTA) can realize the reversible recognition of Cu²⁺ by the probe BP-MSB. Most importantly, the fluorescence imaging of live cells after incubation of BP-MSB with GM12878 cells showed good imaging performance, confirming the sensitivity of the fluorescent probe BP-MSB in vivo. The probe was also used to form an analog logic gate. This probe has the advantages of good stability, simple operation and high selectivity, which provides a broad prospect for environmental monitoring, intracellular detection and practical application of POCT.

Triphenyl-imidazole based reversible coloro/fluorimetric sensing and electrochemical removal of Cu2+ ions using capacitive deionization and molecular logic gates

A simple hydroxyl-substituted triphenyl-imidazole based receptor (HTPI) which selectively detects Cu²⁺ ion by colorimetric and fluorimetric methods was developed. HTPI detects the Cu²⁺ ions with the absorption enhancement and fluorescence quenching by the possible ligand to metal charge transfer (LMCT) and the chelation-enhanced quenching (CHEQ) approaches, respectively. HTPI showed high selectivity and sensitivity for Cu²⁺ ions detection over other interfering and competing metal ions. Interestingly, HTPI detects Cu²⁺ ion (LOD) at nanomolar concentrations (19 × 10^-9 M (UV-vis) & 27 × 10^-9 M (fluorescence), respectively), which is lower than the permissible level of Cu²⁺ ion reported by World Health Organization (WHO). Furthermore, HTPI was applied to the molecular logic gate function by using chemical inputs, and Cu²⁺ ion was potentially removed (95%) via Capacitive Deionization technique.

Functional Single-Walled Carbon Nanotubes for Anion Sensing

We report an anion-sensing platform wherein conductance changes are triggered by chemical interactions between selectors and anions. The selector design incorporates both a cationic moiety (i.e., pyridinium) and a thiourea-based dual-hydrogen-bond donor. Anion binding by a model selector (2) was studied using ¹H NMR and UV-vis titrations, which reveal a binding strength toward acetate ions (AcO^-) followed by Cl^- > Br^- > NO₃^-. These studies reveal that selector 2 is deprotonated upon addition of AcO^-, whereas it undergoes hydrogen bonding associated with Cl^-, Br^-, and NO₃^-. The cationic pyridinium moiety improves anion binding affinity by lowering the pK_a value of selector 2 and enhancing the hydrogen-bond donor capability as confirmed by spectroscopic titrations and DFT calculations. The selector is covalently attached to poly(4-vinylpyridine) (P4VP), which wraps single-walled carbon nanotubes (SWCNTs) (i.e., P4VP-2-SWCNT) to transduce an electrical signal. As a result, continuous anion sensing was achieved with high sensitivity represented by a normalized resistance change of 101.9 ± 10.3% toward 16.7 mM AcO^-, whereas negligible sensitivity was observed toward Cl^-, Br^-, and NO₃^-. The sensitivity transition was attributed to the internal charge transfer of 2 by deprotonation of the thiourea proton upon addition of AcO^-.

Design and synthesis new colorimetric receptors for naked-eye detection of biologically important fluoride and acetate anions in organic and arsenite in aqueous medium based on ICT mechanism: DFT study and test strip application

Novel three colorimetric anion receptors R1, R2 and R3 have been designed and synthesized via condensation reaction and characterized using IR, MS, and NMR spectroscopic techniques. Anion sensing properties were studied using colorimetric, UV-vis titration, ¹H NMR titration, and Cyclic Voltammetric Studies. Comparing the UV-visible titration data of the receptors R1 and R2, R2 showed high redshift (∆λ_max) in the mixed competitive solution (DMSO: H₂O, 9: 1; v/v) of about 155 nm, 157 nm, 169 nm for Na⁺F^-, Na⁺AcO^-, and Na⁺AsO₂^- ions with LOD of 0.23 ppm, 0.18 ppm, and 0.30 ppm, respectively. The observed spectral change of receptor R2 is due to the anion-induced deprotonation of the OH proton, which is confirmed by UV-vis titration, ¹HNMR titration, and cyclic voltammetric studies. Theoretical studies via DFT calculation were carried for R1 and R2 to optimize the structure and to explain the anion-binding mechanism. The application of designed receptor R2 was successfully demonstrated for the detection of F^- and AsO₂^- ions using a test strip. The receptors R1 and R2 proved itself to be potentially useful for real-life application by sensing F^- and AcO^- ions in real samples like toothpaste, mouthwash, vinegar and seawater in a complete aqueous medium.

A FRET-based colorimetric and ratiometric fluorescent probe for the detection of Cu2+ with a new trimethylindolin fluorophore

The possible interaction mechanism between probe RhF and Cu²⁺ ions.