Bi-component sensing platform for the detection of Cd2+, Fe2+and Fe3+ ions

The ability of N-(1,3-dioxo-1H-benzo[de]isoquinolin-2(3H)-yl)isonicotinamide (naphydrazide) or 2,6-pyridinedicarboxylic acid (2,6-H2pdc) individually or as a bi-component system in distinguishing and detecting Fe3+ or Fe2+ and Cd2+ ions was investigated. The use of these molecules as single or bi-component analytes in absorption or emission spectroscopy studies showed that under specific conditions each had their own merits for specific purposes. UV-visible spectroscopic studies of 2,6-H2pdc for assessing the interactions with ferrous and ferric ions showed characteristic distinctions. The detection limit for Fe3+ analysed through UV-visible spectroscopy using naphydrazide was 0.46 μM, whereas it was 1.28 μM using 2,6-H2pdc. Naphydrazide together with Fe3+ allowed distinguishing Cd2+ ions from Zn2+ and Fe2+ ions. The bi-component system was useful for the selective detection of Cd2+ ions using fluorescence spectroscopy, with a detection limit for Cd2+ ions of 18.31 μM. The presence of Fe2+ and Cd2+ ions in a solution of the bi-component had resulted white-light emission. An analogous compound N,N'-(1,3,6,8-tetraoxobenzo[lmn][3,8]phenanthroline-2,7(1H,3H,6H,8H)-diyl)diisonicotinamide (binaphydrazide) was found unsuitable for such detections. Two 2,6-pyridinedicarboxylate Fe3+ complexes possessing protonated naphydrazide or binaphydrazide were prepared and characterised. These complexes were also found unsuitable for the detection of the said ions in solution. Electrochemical studies with the bi-component system showed that cyclic voltammograms could distinguish Fe3+ or Fe2+ from Cd2+ ions.

Heterocyclic Hemipiperazines: Multistimuli-Responsive Switches and Sensors for Zinc or Cadmium Ions

Advance in the design of molecular photoswitches - adapters that convert light into changes at molecular level - opens up exciting possibilities in preparing smart polymers, drugs photoactivated inside humans, or light-fueled nanomachines that might in the future operate in our bloodstream. Hemipiperazines are recently reported biocompatible molecular photoswitches based on cyclic dipeptides. Here we report a multistimuli-responsive hemipiperazine-based switch that reacts on light, solvents, acidity, or metal ions. Its photoequilibration is controlled by the intramolecular hydrogen bonding pattern. The compound can be used as a mid-nanomolar photoswitchable fluorescent sensor for zinc and cadmium ions, applicable to monitor environmental pollution in real time.

Active Hydrogen Free, Z-Isomer Selective Isatin Derived "Turn on" Fluorescent Dual Anions Sensor

An efficient and anions fluorescence "on-off" sensor of 1-(prop-2-yn-1-yl)-3-(quinolin-3-ylimino)indolin-2-one (PQI) has been developed for the selective sensing of dual anions of F- and NO3- ions in aqueous medium. Active hydrogen and Lewis acidic binding sites free, Z- isomer of isatin based π-conjugated quinoline exhibited excellent sensing activity against F- and NO3- ions in UV light. The fluorescence turns on the process accomplished via the PET "on-off" mechanism. The interaction between probe molecule and anions is thought to be a non-covalent interaction of the low electron density covalently bonded N-methylene moiety of propargyl isatin (-N-CH2-) of probe molecule with F- ion and the terminal acidic proton of propargyl group of isatin (-C≡C-H) with NO3- ions. The modes of anions binding with PQI and plausible mechanisms are proposed by 1H and 13C NMR titrations. The selectivity of anions sensing may be offered by the bucked structure of the Z-isomer. The calculated association constant values for PQI and F- and NO3- are ions 2.5 × 104 M-1 and 2.2 × 103 M-1, respectively, indicating strong binding interaction between the PQI and anions. The association nature of anions and probes was analyzed by a Jobs plot and the finding indicates both F- and NO3- ions are in 1:1 complexation with PQI. The limit of detection (LOD) of the probe with F- and NO3- ions is calculated and is to be 6.91 × 10-7 M and 9.93 × 10-7 M, respectively. The proposed PQI fluorophore possesses a low limit of detection (LOD) for both F- and NO3- ions which is within the WHO prescribed detection limit.

Cd2+-Specific Fluorescence Response of Methoxy-Substituted N,N-Bis(2-quinolylmethyl)-2-methoxyaniline Derivatives

The N3O1 tetradentate ligand, TriMeOBQMOA (N,N-bis(5,6,7-trimethoxy-2-quinolylmethyl)-2-methoxyaniline), was developed as a Cd2+-specific fluorescent sensor. The structure of TriMeOBQMOA is half of TriMeOBAPTQ (N,N,N',N'-tetrakis(5,6,7-trimethoxy-2-quinolylmethyl)-1,2-bis(2-aminophenoxy)ethane), which is a tetrakisquinoline derivative of the well-known calcium chelator BAPTA (1,2-bis(2-aminophenoxy)ethane-N,N,N',N'-tetraacetic acid). The fluorescent Cd2+ selectivity of TriMeOBAPTQ (IZn/ICd = 5.3% in the presence of 3 equiv of metal ions in MeOH-HEPES buffer (9:1)) comes from the formation of fluorescent dinuclear cadmium (M2L) and nonfluorescent OH-bridged dizinc ((μ-OH)M2L) complexes. TriMeOBQMOA also exhibits excellent Cd2+ specificity in fluorescence enhancement (IZn/ICd = 2.3% in the presence of 5 equiv of metal ions in DMF-HEPES buffer (1:1, HEPES 50 mM, KCl 0.1 M, pH = 7.5)) via substantial formation of a highly fluorescent bis(μ-chloro)dinuclear cadmium complex ([Cd2(μ-Cl)2L2]2+), which is in equilibrium with the mononuclear Cd2+ complex ([CdLCl]+), and extremely poor stability of the TriMeOBQMOA-Zn2+ complex. The all-nitrogen derivatives of BQMOA and BAPTQ, namely, N,N-BQDMPHEN (N,N-bis(2-quinolylmethyl)-N',N'-dimethyl-1,2-phenylenediamine) and BPDTQ (N,N,N',N'-tetrakis(2-quinolylmethyl)-2,2'-(N,N'-dimethylethylenediamino)dianiline), respectively, and their methoxy-substituted derivatives were also prepared, and the fluorescent metal ion sensing properties are discussed.

Easily synthesizable molecular probe for the nanomolar level detection of Cd2+ in near aqueous media: Theoretical investigations and live cell imaging

The present investigation highlights a quinoline-based small molecule probe (DEQ) for the detection of Cd2+ among other metal ions in near-aqueous media. The probe DEQ and its Cd2+ complex (DEQ-Cd) have been synthesized and characterized by all possible spectroscopic methods. The weakly emissive DEQ showed its strong emission in the presence of Cd2+, which is attributed to the photoinduced electron transfer (PET) along with the chelation-enhanced fluorescence (CHEF) mechanism. The 1:1 binding mode between ligand and Cd2+ is confirmed by single crystal XRD analysis, which is further supported by Job's plot and HRMS. The detection limit of the probe to recognize Cd2+ was found to be as low as 89 nM. Furthermore, DEQ can act as a reversible fluorescence probe with the off-on-off mechanism by the alternative addition of Cd2+ and EDTA. DFT and TD-DFT studies exposed the proposed mechanism after Cd2+ insertion and the obtained results for electronic spectra are in line with the experimental results. The response towards pH was quite interesting and allowed us to study its application in live cell imaging. With all the positive results, the proposed ligand DEQ can be used as a potential probe for the detection of Cd2+ in real-life applications.

Tuning the coordination properties of chiral pseudopeptide bis(2-picolyl)amine and iminodiacetamide ligands in Zn(ii) and Cu(ii) complexes

Modifications of the chiral side chains of bpa and imda ligands lead to different metal ion coordination and hydrogen bonding ability.

Recent progress in cadmium fluorescent and colorimetric probes

Cadmium is a heavy metal which exists widely in industrial and agricultural production and can induce a variety of diseases in organisms. Therefore, its detection is of great significance in the fields of biology, environment and medicine. Fluorescent probe has been a powerful tool for cadmium detection because of its convenience, sensitivity, and bioimaging capability. In this paper, we reviewed 98 literatures on cadmium fluorescent sensors reported from 2017 to 2021, classified them according to different fluorophores, elaborated the probe design, application characteristics and recognition mode, summarized and prospected the development of cadmium fluorescent and colorimetric probes. We hope to provide some help for researchers to design cadmium fluorescent probes with higher selectivity, sensitivity and practicability.

Cadmium is a heavy metal which exists widely in industrial and agricultural production and can induce a variety of diseases in organisms.

Preparation and properties of a novel polystyrene solid-phase fluorescence pH sensor based on a naphthalimide derivative

A novel naphthalimide-based solid-phase fluorescence pH sensor (PS-Acyl-II) is prepared by immobilization of a small molecule probe (II) on polystyrene microspheres through an ester bond and is characterized by Fourier-transform infrared spectroscopy, optical microscope, scanning electron microscope, and conductiometric titrations. The sensor can determine the pH of a solution within the pH 4.0–7.0, free from interference of common metal ions, and can be reused several times. The geometries of II, PS-Acyl-II, and its product with H+ are optimized at the B3LYP/6-31G** level by density functional theory. The charge distribution, orbital interactions, and bonding characteristics are analyzed and compared in detail to discuss the recognition mechanism and structure–fluorescence property relationships.

Bicolour fluorescent molecular sensors for cations: design and experimental validation

Molecular entities whose fluorescence spectra are different when they bind metal cations are termed bicolour fluorescent molecular sensors. The basic design criteria of this kind of compound are presented and the different fluorescent responses are discussed in terms of their chemical behaviour and electronic features. These latter elements include intramolecular charge transfer (ICT), formation of intramolecular and intermolecular excimer/exciplex complexes and Förster resonance energy transfer (FRET). Changes in the electronic properties of the fluorophore based on the decoupling between its constitutive units upon metal binding are also discussed. The possibility of generating fluorescent bicolour indicators that can capture metal cations in the gas phase and at solid-gas interfaces is also discussed.

Developing a new chemosensor targeting zinc ion based on two types of quinoline platform

A chemosensor DQ (2-(2-(quinolin-2-yl)hydrazinyl)-N-(quinolin-8-yl)acetamide), based on two quinoline moieties, has been synthesized. DQ could detect zinc ion through fluorescence turn-on in aqueous media. Limit of detection was calculated as 0.07 μM, far lower than the standard of WHO for zinc ion. The practicality of DQ was demonstrated via the successful results of reusability with EDTA, easy detection on the test strip, and precise quantification in real water samples. Additionally, sensor DQ could be applied to bioimaging of zinc ion in zebrafish. Sensing process of zinc ion by DQ was studied through fluorescence and UV-Vis spectroscopy, ¹H NMR titration, and ESI-mass spectrometry.

A Highly Selective Fluorescent Probe for Hg2+ Based on a 1,8-Naphthalimide Derivative

Hg2+ has a significant hazardous impact on the environment and ecosystem. There is a great demand for new methods with high selectivity and sensitivity to determine mercury in life systems and environments. In this paper, a novel turn-on Hg2+ fluorescent probe has been reported with a naphthalimide group. The Hg2+ fluorescent probe was designed by the inspiration of the well-known specific Hg2+-triggered thioacetal deprotection reaction. A 1,2-dithioalkyl group was chosen as the specific recognition site of Hg2+. The probe showed weak fluorescence without Hg2+, and the color of the solution was light yellow. In the presence of Hg2+, the probe reacted specifically with the mercury ion to produce an aldehyde and emitted strong fluorescence, and the color of the solution also turned light green, thus realizing the monitoring of the mercury ion. The Hg2+ fluorescent probe showed outstanding sensitivity and selectivity toward Hg2+. Furthermore, the Hg2+ fluorescent probe could work in a wide pH range. The linear relationship between the fluorescence intensity at 510 nm and the concentration of Hg2+ was obtained in a range of Hg2+ concentration from 2.5 × 10-7 to 1.0 × 10-5 M. The detection limit was found to be 4.0 × 10-8 M for Hg2+. Furthermore, with little cell toxicity, the probe was successfully applied to the confocal image of Hg2+ in PC-12 cells.

A dual functional fluorescent sensor for the detection of Al3+ and Zn2+ in different solvents

A new fluorescent sensor, X, was designed and synthesized based on imidazo[2,1-b]thiazole and 2-hydroxy-1-naphthaldehyde, which could be used to detect Al³⁺ in methanol buffer solution and detect Zn²⁺ in ethanol buffer solution, respectively.