Coumarin Derivative and Gold Nanoparticle Conjugate as a Selective Fluorescent Sensor for Mercury Ion in Real Sample

A biphenyl based coumarin fluorescent molecule, N,N'-bis(7-diethylamino-2-oxo-2 H-chromen-3-yl)methylene)biphenyl-2-2'-dicarbohydrazide (molecule 1) has been synthesized and characterised. Photophysical studies of 1 exhibit solvent polarity dependent absorption and emission maxima. Citrate capped gold nanoparticles (AuNPs) have been mixed with molecule 1 for the preparation of AuNPs/1 conjugate. The association constant of the AuNPs/1 conjugate has been calculated to 4.54 × 104 M- 1. The AuNPs/1 conjugate has been found to detect Hg2+ ion selectively by fluorescence enhancement. While addition of molecule 1 into the solution of AuNPs, fluorescence intensity of 1 quenched. On addition of several monovalent, divalent and trivalent metal ion into the solution of AuNPs/1 conjugate separately, there was no change in fluorescence intensity of 1 has been observed. However, upon addition of Hg2+ ion into the solution of AuNPs/1 conjugate, the fluorescence intensity enhancement occurred, indicating released of 1 from the surface of AuNPs and probably aggregation of AuNPs took place in presence of Hg2+ ion. The AuNPs/1 conjugate has been found to have a detection limit of 2.3 × 10- 9 M for Hg2+ ion in aqueous solvent. Meanwhile, the AuNPs/1 conjugate have also been successfully applied for the determination of Hg2+ in real water samples.

A detection system for serum cholesterol based on the fluorescence color detection of beta-cyclodextrin-capped gold nanoclusters

Cholesterol is one of the major markers for cardiovascular diseases. Herein, a portable cholesterol measurement system based on fluorescence color detection was constructed by combining the high sensitivity of fluorescence analysis with the ease of color sensing to determine low levels of serum cholesterol. Cyclodextrin capping gold nanoclusters with blue-green emission were used as fluorescent probes because cholesterol exposure induced fluorescence enhancement of the probe due to the host-guest inclusion interaction between cholesterol and the cavity of cyclodextrin. The integrated sensing system consisted of modules including a microprocessor, a power supply, an LED light with a constant current source, an RGB color sensor, a display, and a darkroom. All the modules except the display screen were placed in a 3D printing darkroom to avoid interference from ambient light. An RGB color sensor TCS230 was applied to capture the RGB signals of the fluorescent color of the probe solution before and after cholesterol addition. Then the obtained RGB signals were converted into the signals in Hue, Saturation, and Value (HSV) color space with a central control chip STM32F407. The Hue value of the fluorescent color of the solution can discriminate the concentration change of cholesterol. Experimental results demonstrate that the system responds linearly to cholesterol in the concentration range of 20.00 ∼ 150.00 μmol·L-1 with a detection limit of 16.07 μmol·L-1 (3σ, n = 3). The detection of the system has good consistency and accuracy compared with the standard instrument, showing potential for the detection of low levels of serum cholesterol.

A rapid and non-destructive identification for paper cup evidence based on shifted-excitation Raman difference spectroscopy and SOM clustering

In order to achieve rapid, non-destructive, efficient, and accurate classification of paper cup samples, we propose a classification model that integrates shifted-excitation Raman difference spectroscopy (SERDS) with self-organizing map (SOM) and Bayesian optimization-support vector machine (BO-SVM). We collected differential Raman data from 52 paper cup samples using SERDS, with an excitation wavelength range of 784-785 nm, a laser power of 440 mW, an integration time of 10 s, and a spectral range spanning from 280 to 2700 cm-1 . Subsequently, principal component analysis (PCA) was applied to reduce the dimensionality of the data. The SOM clustering outcomes were utilized as the foundation for constructing the discriminant analysis (FDA) and BO-SVM classification models. The primary constituent of the paper cup samples was identified as cellulose, while additional fillers such as talc, calcium carbonate, and kaolin were also present. The SOM clustering categorized the samples into seven distinct groups. The FDA model achieved a classification accuracy of 92.3%, and the BO-SVM model reached a classification accuracy of 96.2%. The SOM clustering effectively discerned samples with different fillers, as evidenced by distinct peak numbers and shapes in the differential Raman spectra, thereby underscoring the practical significance of SOM clustering. In comparison with FDA, BO-SVM exhibited enhanced classification accuracy and exceptional performance in handling outliers and linearly inseparable data, indicating its superior generalization capabilities.

Semiconductor/Carbon Quantum Dot-based Hue Recognition Strategy for Point of Need Testing: A Review

The requirement to establish novel methods for visual detection is attracting attention in many application fields of analytical chemistry, such as, healthcare, environment, agriculture, and food. The research around subjects like "point-of-need", "hue recognition", "paper-based sensor", "fluorescent sensor", etc. has been always aimed at the opportunity to manufacture convenient and fast-response devices to be used by non-specialists. It is possible to achieve economic rationality and technical simplicity for optical sensing toward target analytes through introduction of fluorescent semiconductor/carbon quantum dot (QD) and paper-based substrates. In this Review, the mechanisms of anthropic visual recognition and fluorescent visual assays, characteristics of semiconductor/carbon QDs and ratiometric fluorescence test paper, and strategies of semiconductor/carbon QD-based hue recognition are described. We cover latest progress in the development and application of point-of-need sensors for visual detection, which is based on a semiconductor/carbon quantum dot-based hue recognition strategy generated by ratiometric fluorescence technology.

Fluorescent and Colorimetric Dual-Mode Strategy Based on Rhodamine 6G Hydrazide for Qualitative and Quantitative Detection of Hg2+ in Seafoods

In this study, a rapid fluorescent and colorimetric dual-mode detection strategy for Hg²⁺ in seafoods was developed based on the cyclic binding of the organic fluorescent dye rhodamine 6G hydrazide (R6GH) to Hg²⁺. The luminescence properties of the fluorescent R6GH probe in different systems were investigated in detail. Based on the UV and fluorescence spectra, it was determined that the R6GH has good fluorescence intensity in acetonitrile and good selective recognition of Hg²⁺. Under optimal conditions, the R6GH fluorescent probe showed a good linear response to Hg²⁺ (R² = 0.9888) in the range of 0-5 μM with a low detection limit of 2.5 × 10^-2 μM (S/N = 3). A paper-based sensing strategy based on fluorescence and colorimetric analysis was developed for the visualization and semiquantitative analysis of Hg²⁺ in seafoods. The LAB values of the paper-based sensor impregnated with the R6GH probe solution showed good linearity (R² = 0.9875) with Hg²⁺ concentration in the range of 0-50 μM, which means that the sensing paper can be combined with smart devices to provide reliable and efficient Hg²⁺ detection.

A critical review on the environmental applications of carbon dots

The discovery of zero-dimensional carbonaceous nanostructures called carbon dots (CDs) and their unique properties associated with fluorescence, quantum confinement and size effects have intrigued researchers. There has been a substantial increase in the amount of research conducted on the lines of synthesis, characterization, modification, and enhancement of properties by doping or design of composite materials, and a diversification of their applications in sensing, catalysis, optoelectronics, photovoltaics, and imaging, among many others. CDs fulfill the need for inexpensive, simple, and continuous environmental monitoring, detection, and remediation of various contaminants such as metals, dyes, pesticides, antibiotics, and other chemicals. The principles of green chemistry have also prompted researchers to rethink novel modes of nanoparticle synthesis by incorporating naturally available carbon precursors or developing micro reactor-based techniques. Photocatalysis using CDs has introduced the possibility of utilizing light to accelerate redox chemical transformations. This comprehensive review aims to provide the reader with a broader perspective of carbon dots by encapsulating the concepts of synthesis, characterization, applications in contaminant detection and photocatalysis, demerits and research gaps, and potential areas of improvement.

Carbon Dots: An Excellent Fluorescent Probe for Contaminant Sensing and Remediation

Pollution-induced degradation of the environment is a serious problem for both developing and developed countries. Existing remediation methods are restricted, necessitating the development of novel remediation technologies. Nanomaterials with unique characteristics have recently been developed for remediation. Quantum dots (QDs) are semiconductor nanoparticles (1-10 nm) with optical and electrical characteristics that differ from bigger particles owing to quantum mechanics, making them intriguing for sensing and remediation applications. Carbon dots (CDs) offer better characteristics than typical QDs, such as, CdSe QDs in terms of contaminant sensing and remediation. Non-toxicity, chemical inertness, photo-induced electron transfer, good biocompatibility, and adjustable photoluminescence behavior are all characteristics of CDs. CDs are frequently made from sustainable raw materials as they are cost-effective, environmentally compactable, and excellent in reducing waste generation. The goal of this review article is to briefly describe CDs fabrication methods, to deeply investigate the criteria and properties of CDs that make them suitable for sensing and remediation of contaminants, and also to highlight recent advances in their use in sensing and remediation of contaminants.

Quantitative Visual Detection of Mercury Ions With Ratiometric Fluorescent Test Paper Sensor

A novel ratiometric fluorescence probe based on nitrogen-doped blue carbon dots (NCDs) and red gold nanoclusters (Au NCs) for mercuric ion (Hg2+) has been prepared and characterized. A user friendly fluorescent test paper based sensor combined with smartphone was fabricated for rapid visual and quantitative detection. Hg²⁺ can specifically bind to Au⁺ on the surface of Au NCs, leading to the quench of red fluorescence while the fluorescence intensity of the NCDs with blue fluorescence remained unchanged as a internal standard signal. The implement of paper-based sensor address some common drawback in analytical process such as the detection time, analysis cost. In a further demonstration, a homemade detection device with smartphone was used to qualify the Hg²⁺. After adding different concentration of Hg²⁺, red, purple, and blue colors were obtained on the detection zones of the fluorescent test paper. The Android App Color Grab was used to identify the red, green and blue (RGB) values of fluorescent color. The rapid visual and quantitative detection of Hg²⁺ was accomplished with the detection limit of 2.7 nM for fluorescence, 25 nM for smartphone and 32 nM for paper strip. The developed multi-mode detection platform was successfully applied to the detection of mercury ions in water samples with acceptable recoveries. The NCDs and Au NCs probe facilitate the one-site environmental monitoring for Hg²⁺ with “naked-eye” and smartphone.

A visualized ratiometric fluorescence sensing system for copper ions based on gold nanoclusters/perovskite quantum dot@SiO2 nanocomposites

Excessive copper ions (Cu²⁺) cause serious environmental pollution and even endanger the health of organisms. Fluorescence chemosensing materials are widely used in the detection of metal ions due to their simple operation and high sensitivity. In this study, SiO₂-encapsulated single perovskite quantum dot (PQD@SiO₂) core-shell nanostructures which show strong, stable, and green fluorescence are synthesized and composited with gold nanoclusters (AuNCs) which show Cu²⁺-sensitive and red light-emitting fluorescence to obtain a visualized ratiometric fluorescence sensor (AuNCs/PQD@SiO₂) for the detection of Cu²⁺. In the visualized detection of Cu²⁺, the green fluorescence emitted from the ion-insensitive PQD@SiO₂ component is used as a reference signal and the red fluorescence emitted by ion-sensitive AuNC component is adopted as a sensing signal. In the presence of Cu²⁺, the red fluorescence is quenched whereas the green fluorescence remains stable, which results in a visualized fluorescence color change from orange-red to yellow and finally to green with increasing Cu²⁺ concentration. The significant change in the fluorescence color of AuNCs/PQD@SiO₂ in response to Cu²⁺ enables a rapid, sensitive, and visualized detection of Cu²⁺. Further accurate and sensitive ratiometric fluorescence analysis of Cu²⁺ can be accomplished by measuring the ratio of fluorescence intensities at 643 and 520 nm (I₆₄₃/I₅₂₀) at a certain Cu²⁺ level. The developed AuNCs/PQD@SiO₂-based sensor has been validated by its satisfactory application in the detection of Cu²⁺ in human serum and environmental water samples.

Paper-Based Analytical Devices for Colorimetric and Luminescent Detection of Mercury in Waters: An Overview

Lab-on-paper technologies, also known as paper-based analytical devices (PADs), have received increasing attention in the last years, and nowadays, their use has spread to virtually every application area, i.e., medical diagnostic, food safety, environmental monitoring, etc. Advantages inherent to on-field detection, which include avoiding sampling, sample preparation and conventional instrumentation in central labs, are undoubtedly driving many developments in this area. Heavy metals represent an important group of environmental pollutants that require strict controls due to the threat they pose to ecosystems and human health. In this overview, the development of PADs for Hg monitoring, which is considered the most toxic metal in the environment, is addressed. The main emphasis is placed on recognition elements (i.e., organic chromophores/fluorophores, plasmonic nanoparticles, inorganic quantum dots, carbon quantum dots, metal nanoclusters, etc.) employed to provide suitable selectivity and sensitivity. The performance of both microfluidic paper-based analytical devices and paper-based sensors using signal readout by colorimetry and luminescence will be discussed.

Development of carbon dot-thiochrome-based sensing system for ratiometric fluorescence detection of D-penicillamine

A simple and rapid ratiometric fluorescent sensing system for D-penicillamine (D-PA) determination is developed based on yellow carbon dots (Y-CDs) combined with thiochrome (oxVB₁) for the first time. The oxidization of thiamine (VB₁) can be catalyzed by Alkaline-hydrolyzed artemisinin (a-ART) to form oxVB₁, which leads to the occurrence of fluorescence emission peak at 466 nm. Furthermore, the oxidation reaction between a-ART and VB₁ could be inhibited by D-PA, and accompanied with the decrease of fluorescence at 466 nm. However, the fluorescence peak of Y-CDs as an internal reference at 566 nm was almost unchanged. The ratiometric signal changes contributed to a robust and sensitive D-PA sensing. Under the optimal condition, a good linear response for the D-PA detection was obtained in the ranges of 0.5-50 μM with a detection limit of 0.33 μM. In addition, Y-CDs and thiochrome-based sensing system was applied to D-PA determination in real samples and obtained acceptable results. We developed a new carbon dots/thiochrome fluorescent nanoprobe for ratiometric fluorescence sensing of D-penicillamine.

Nanomaterial-Integrated Cellulose Platforms for Optical Sensing of Trace Metals and Anionic Species in the Environment

The development of disposable sensors that can be easily adapted to every analytical problem is currently a hot topic that is revolutionizing many areas of science and technology. The need for decentralized analytical measurements at real time is increasing for solving problems in areas such as environment pollution, medical diagnostic, food quality assurance, etc., requiring fast action. Despite some current limitations of these devices, such as insufficient detection capability at (ultra)trace level and risk of interferent effects due to matrix, they allow low-cost analysis, portability, low sample consumption, and fast response. In the last years, development of paper-based analytical devices has undergone a dramatic increase for on-site detection of toxic metal ions and other pollutants. Along with the great availability of cellulose substrates, the immobilization of receptors providing enhanced recognition ability, such as a variety of nanomaterials, has driven the design of novel sensing approaches. This review is aimed at describing and discussing the different possibilities arisen with the use of different nanoreceptors (e.g., plasmonic nanoparticles, quantum dots, carbon-based fluorescent nanoparticles, etc.) immobilized onto cellulose-based substrates for trace element detection, their advantages and shortcomings.

Carbon dots based ratiometric fluorescent sensing platform for food safety

Food safety has become a major global concern and the rapid detection of food nutritional ingredients and contaminants has aroused much more attention. Nanomaterials-based fluorescent sensing holds great potential in designing highly sensitive and selective detection strategies for food safety analysis. Carbon dots (CDs) possess tremendous prospects in fluorescent sensing food ingredients and contaminants due to their superior properties of chemical and photostability, highly fluorescence with tunability, and no/low-toxicity. Numerous endeavors are demanded to contribute to overcoming the challenge of lower sensitivity and selectivity of the sensors interfered by various components in intricate food matrices to ensure food safety and human health. Nanohybrid CDs based ratiometric fluorescent sensing with self-calibration is regarded as an efficient strategy for the CDs based sensors for the specific recognition of target analyte in the food matrices. This work is devoted to reviewing the development of nanohybrid CDs based ratiometric fluorescent sensing platform and the perspectives of the platform for food safety. The applications of nanohybrid CDs in sensing are summarized and the sensing mechanisms are briefly discussed.

Biomass-Derived Sulfur, Nitrogen Co-Doped Carbon Dots for Colorimetric and Fluorescent Dual Mode Detection of Silver (I) and Cell Imaging

A method for green synthesis of sulfur, nitrogen co-doped photoluminescence carbon dots (S,N/CDs) originating from two natural biomass was proposed. By simple hydrothermal heating of bean pod and onion, blue emission CDs were prepared. Ag+ can effectively quench the as-prepared S,N/CDs. Under optimized conditions, the linear range of the established method for Ag+ detection was 0.1-25 μM, and the detection of limit based on 3S/N was 37 nM. More interestingly, the addition of Ag+ can induce an evident color change of S,N/CDs from yellow to brown under sunlight. The developed method was applied for detection of Ag+ in river water and tap water samples. Satisfied recoveries ranging from 96.0 to 102.0% with precision below 4.1% were obtained. S,N/CDs showed low toxicity toward 4T1 cells, which also can be extended to cellular imaging and intracellular Ag+ detection. The simple and green approach proposed here could meet the requirements for bioimaging and environmental monitoring.

Construction of an effective ratiometric fluorescent sensing platform for specific and visual detection of mercury ions based on target-triggered the inhibition on inner filter effect

Sensitive and selective determination of mercury ion (Hg²⁺) is critical for human health and environmental monitoring. Herein we construct an effective ratiometric fluorescent sensing platform by combining green fluorescent polymer carbon dots (PCDs) and red fluorescent tetraphenylporphyrin tetrasulfonic acid hydrate (TPPS) for specific and visual detection of Hg²⁺. The fluorescence of PCDs can be quenched by TPPS through inner filter effect (IEF). In the presence of both Mn²⁺ and Hg²⁺, however, Hg²⁺ can expedite the complexation of TPPS and Mn²⁺, which causes the decrease in both fluorescence and absorption of TPPS, accompanied by the fluorescence recovery of PCDs due to the subdued IFE between TPPS and PCDs. Based on the change of fluorescence signal, a ratiometric fluorescent sensing platform is constructed for specific and visual detection of Hg²⁺. The proposed approach presents a fine linear range for Hg²⁺ over the range of 10-200 nM with a detection limit of 0.038 nM. Moreover, an easily distinguishable fluorescence color change from pink to green with the increase of Hg²⁺ concentration can be observed by the naked eye under a UV lamp. Such a simple and effective method shows great potential for visual sensing of Hg²⁺ in on-site and resource-limited settings.