Structured Cerium-Manganese Catalysts Supported on Nickel Foam for Toluene Oxidation by Electric Internal Heating

Structured catalysts are widely used in catalytic oxidation of gaseous pollutants, hot catalysis is usually needed to assist the reaction in the catalytic process. Herein, a Ce-modified manganese oxide octahedral molecular sieves (Ce-OMS-2) structured catalyst supported on foam nickel was prepared through impregnation process. A systematically quantitative testing on the toluene catalytic oxidation effectiveness of this structured catalyst was conducted through catalyst evaluation device, combining a series of characterization methods, such as XRD and SEM, the structure-activity relationship was established. Assisted with electric internal heating and ozone oxidation environments, this structured catalyst exhibits excellent catalytic oxidation performance for oxidative decomposition of toluene even under high humidity conditions. The results showed that the ozone-coupled structured nickel foam catalyst increased the decomposition efficiency of toluene from 25 % (without catalyst and heating) to 55 % (with catalyst and without heating) and the electric internal heating can significantly improve the reactivity and moisture resistance of the structured nickel-foam catalyst, at 90 % RH and 40000 h-1, 50000 ppb O3 and 40 mg/m3 toluene was maintained 100 % catalytic efficiency. The high-efficiency non-precious metal-based electrothermal catalyst prepared herein is expected to have certain enlightenment for the purification of VOCs.

Ag-embedded manganese oxide octahedral molecular sieve (Ag-OMS-2) nano-rods as efficient heterogeneous catalysts for hydration of nitriles to amides in aqueous solution

Silver-embedded manganese oxide octahedral molecular sieve (Ag-OMS-2) nano-rods were synthesized using a pre-incorporation approach, and unambiguously characterized by transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). A highly uniform distribution of Ag nanoparticles embedded in the porous structure of OMS-2, was found to be in favor of high catalytic activity of the composite for hydration of nitriles to corresponding amides in aqueous solution. By using a catalyst dosage of 30 mg per mmol of substrate, in the temperature range of 80-100 °C, and reaction times of 4-9 h, excellent yields (73-96%) of the desired amides (13 examples) were obtained. Also, the catalyst was easy to recycle, and showed a slight decrease in efficiency after six consecutive runs.

MOF-derived MnO@C with high activity for electric field-assisted catalytic oxidation of aqueous pollutants

The activation of oxygen (O₂) under room condition is important for the utilization of air to perform oxidation. Here, we report a porous carbon-encapsulated MnO (MnO@C) derived from Mn metal-organic framework (MOF)grown in-situ on a graphite felt (GF) support. The MnO@C exhibits superior catalytic activity in an electric field-assisted catalytic oxidation system for the degradation of organic pollutants under room condition. The catalytic oxidation reaction applies a surface reaction pathway in which the surface-bound chemisorbed oxygen species are electro-oxidized and then involved in the oxidation of co-adsorbed organic pollutants. The abundant oxygen vacancies and oxygenated functional groups in MnO@C provide active sites for the chemisorption of O₂, and its conductive mesoporous structure allows facile electrons and mass transfer. As a result, the MnO@C/GF catalyst displays quite high turnover frequency (TOF) value as 0.038 mg-TOC mg-MnO^-1 min^-1, which is 6.66 times higher than that of the MnO/GF catalyst prepared by impregnation method as a comparison. With the aid of + 1.0 V of positive electric field, the catalytic oxidation system exhibits extensive effectiveness in mineralizing a variety of dyes, pharmaceuticals, personal care products, and phenolic compounds under room condition with significantly enhanced biodegradability.

Normal temperature catalytic degradation of toluene over Pt/TiO2

Normal temperature catalytic ozonation is an effective method for the removal of volatile organic compounds (VOCs). A series of TiO₂-supported noble metal catalysts were synthesized by a facile impregnation method. The as-prepared catalysts were evaluated for the catalytic oxidation of toluene. It was determined that the 1 wt%Pt/TiO₂ exhibited outstanding performance that 65% conversion of toluene was achieved with the space velocity of 30,000 h^-1 even at room temperature (25°C). The structure-activity relationship of various catalysts was investigated via BET, XRD, SEM, TEM as well as XPS. The results indicated that the uniform dispersion of Pt nanoparticles, abundant surface adsorbed oxygen species as well as the strong interaction between Pt and TiO₂ favoured toluene degradation at normal temperature. Based on FT-IR, a simplified reaction scheme was proposed: toluene was first oxidized to benzoate species then alcohol species, ketones, carboxyl acids, which was finally degraded into CO₂ and H₂O. The low activation energy of 1 wt%Pt/TiO₂ determined to be 47 kJ mol^-1 also benefited for toluene degradation at ambient temperature.

An investigation on catalytic performance and reaction mechanisms of Fe/OMS-2 for the oxidation of carbon monoxide, ethyl acetate, and toluene

The octahedral molecular sieve (OMS-2)-supported Fe (xFe/OMS-2: x = 1, 3, 5, and 10) catalysts were prepared using the pre-incorporation method. Physicochemical properties of the as-synthesized materials were characterized by means of various techniques, and their catalytic activities for CO, ethyl acetate, and toluene oxidation were evaluated. Among all of the samples, performed the best, with the reaction temperature required to achieve 90% conversion (T_90%) being 160°C for CO oxidation, 210°C for ethyl acetate oxidation, and 285°C for toluene oxidation. Such a good catalytic performance of 5Fe/OMS-2 was associated with its high (Mn³⁺ + Mn²⁺) content and adsorbed oxygen species concentration, and good low-temperature reducibility and lattice oxygen mobility as well as strong interaction between Fe and OMS-2. In addition, catalytic mechanisms of the oxidation of three pollutants over the 5Fe/OMS-2 catalyst were also studied. It was found that CO, ethyl acetate or toluene was first adsorbed, then the related intermediates were formed, and finally the formed intermediates were completely converted into CO₂ and H₂O.

Engineering of Mn3O4@Ag microspheres assembled from nanosheets for superior O3 decomposition

A topochemical transformation route was designed for synthesis of Mn3O4 nanospheres using β-MnOOH as the precursor. Ag nanoparticles were doped via an in situ redox reaction to obtain Mn3O4@Ag-NF, which displayed an enhanced performance for O3 elimination.

Current progress on catalytic oxidation of toluene: a review

Toluene is one of the pollutants that are dangerous to the environment and human health and has been sorted into priority pollutants; hence, the control of its emission is necessary. Due to severe problems caused by toluene, different techniques for the abatement of toluene have been developed. Catalytic oxidation is one of the promising methods and effective technologies for toluene degradation as it oxidizes it to CO₂ and does not deliver other pollutants to the environment. This paper highlights the recent progressive advancement of the catalysts for toluene oxidation. Five categories of catalysts, including noble metal catalysts, transition metal catalysts, perovskite catalysts, metal-organic frameworks (MOFs)-based catalysts, and spinel catalysts reported in the past half a decade (2015-2020), are reviewed. Various factors that influence their catalytic activities, such as morphology and structure, preparation methods, specific surface area, relative humidity, and coke formation, are discussed. Furthermore, the reaction mechanisms and kinetics for catalytic oxidation of toluene are also discussed.

Trace holmium assisting delaminated OMS-2 catalysts for total toluene oxidation at low temperature

In this study, octahedral molecular sieve (OMS-2) is successfully delaminated by using trace holmium (Ho) via a facile redox co-precipitation route, which exhibits high performance for the total toluene oxidation at low temperature. High resolution transmission electron microscope (HRTEM), X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR) analyses verify that abundant multi-phase interfaces and lattice dislocations are formed on the obtained delaminated OMS-2 by the Ho (Ho-OMS-2), which can induce more active oxygen species. In particular, the delaminated OMS-2 with a trace Ho amount has a high O_ads/O_latt ratio with a balanced ratio of Mn³⁺ and Mn⁴⁺, demonstrating much higher activity (T_100% of 228 °C even under 5 vol% H₂O vapor over 0.5% Ho-OMS-2) than the parent OMS-2 (T_100% of 261 °C) for the total toluene oxidation. Furthermore, the positive effect of the introduction of H₂O on catalytic activity, especially the enhancement of the conversion of intermediates into CO₂ and H₂O, is verified by the in situ diffuse reflection infrared Fourier transform spectroscopy (DRIFTS). Based on these results, the reaction mechanism for toluene oxidation over the OMS-2 based catalyst is proposed. It is expected to provide an effective preparation method to obtain high-performance catalysts for the VOCs oxidation at low temperatures.

Microwave-assisted synthesis of manganese oxide catalysts for total toluene oxidation

Oxygen vacancy on the heterogeneous catalyst is of great importance to the catalysis of volatile organic compound (VOC) oxidation. Herein, microwave radiation with special energy-excitation is successfully utilized for the post-processing of a series of manganese oxides (MnO_x) to generate oxygen vacancies. It is found that the MnO_x catalyst with 60 min of microwave radiation demonstrates higher activity for toluene oxidation with a T_50% of 210 °C and a T_100% of 223 °C, which is attributed to the higher concentration of oxygen vacancies derived from the rich phase interface defects resulted from the microwave radiation. Furthermore, the Mn-MW-60 catalyst possesses excellent thermal stability and water vapor tolerance even under 20 vol% H₂O atmospheres within 60 h. In situ DRIFTS analysis verifies that both surface and lattice oxygen species simultaneously participate the oxidation process, and all reactions over different environments follows two different pathways. Meanwhile, it is proposed that those oxygen vacancies derived from microwave radiation could facilitate the rate-controlling step of opening the aromatic ring based on the electron back-donation, thereby leading to the increment of catalytic activity.

The improved activity of Co3O4 nanorods using silver in the catalytic oxidation of toluene

Co₃O₄ nanorods with diameters of ~0.15 μm and lengths of ~1 μm were prepared using a hydrothermal method via the assembly of microcrystals and tested in the catalytic oxidation of toluene. The catalytic performance of Co₃O₄ nanorods was improved by the addition of Ag at various concentrations, and the 7% Ag/Co₃O₄ catalyst achieves a toluene conversion of 90% at 256 °C with a space velocity of 78,000 mL g^-1 h^-1, which is much lower than that of the pristine Co₃O₄ (269 °C). The addition of Ag promoted the activation of the surface oxygen species and the formation of more oxygen vacancies, improving the relative low-temperature reducibility of Co₃O₄, which is favorable for toluene oxidation. Moreover, the 7% Ag/Co₃O₄ catalyst showed an excellent stability for toluene oxidation at 250 and 260 °C for 50 h under the same conditions.

Enhanced Performance of the OMS-2-Supported CuOx Catalysts for Carbon Monoxide, Ethyl Acetate, and Toluene Oxidation

Different Cu contents (x wt%) were supported on the cryptomelane-type manganese oxide octahedral molecular sieve (OMS-2) (xCu/OMS-2; x = 1, 5, 15, and 20) via a pre-incorporation method. Physicochemical properties of the OMS-2 and xCu/OMS-2 samples were characterized by means of the XRD, FT-IR, SEM, TG/DTG, ICP-OES, XPS, O2-TPD, H2-TPR, and in situ DRIFTS techniques, and their catalytic activities were measured for the oxidation of CO, ethyl acetate, and toluene. The results show that the Cu species were homogeneously dispersed in the tunnel and framework structure of OMS-2. Among all of the samples, 15Cu/OMS-2 sample exhibited the best activities with the T50% of 65, 165, and 240 °C as well as the T90% of 85, 215, and 290 °C for CO, ethyl acetate and toluene oxidation, respectively, which was due to the existence of the Cu species and Mn3+/Mn4+ redox couples, rich oxygen vacancies, good oxygen mobility, low-temperature reducibility, and strong interaction between the Cu species and the OMS-2 support. The reaction mechanisms were also deduced by analyzing the in situ DRIFTS spectra of the 15Cu/OMS-2 sample. The excellent oxygen mobility associated with the electron transfer between Cu species and Mn3+/Mn4+ redox couples might be conducive to the continuous replenishment of active oxygen species and the constantly generated reactant intermediates, thereby increasing the reactant reaction rate.

Enhanced catalytic activity of OMS-2 for carcinogenic benzene elimination by tuning Sr2+ contents in the tunnels

Cryptomelane-type manganese oxides (OMS-2) have been intensively investigated for application in the catalytic oxidation of carcinogenic benzene, and doping metal ions in the OMS-2 tunnels are widely used for modifying its catalytic activity. In this study, we reported a novel strategy of enhancing catalytic activity of OMS-2 for carcinogenic benzene elimination by tuning Sr²⁺ concentration in the tunnels. The catalytic activity result revealed that an obvious decrease (△T₅₀ = 27 °C and △T₉₀ = 37 °C) in T₅₀ and T₉₀ (corresponding to benzene conversions at 50 % and 90 %, respectively; initial benzene concentration was 2000 mg m^-3; contact time was 1.5 s) had been observed by increasing the Sr²⁺ concentration in the OMS-2 tunnels. The origin of Sr²⁺ doping effect on catalytic activity was theoretically and experimentally investigated by CO temperature-programmed reduction, ¹⁸O₂ isotope labeling, and density functional theory calculations. The result confirmed that increasing Sr²⁺ concentration in the tunnels not only promoted the lattice oxygen activity, but also facilitated the generation of more oxygen vacancy defects, thus considerably improving the catalytic activity of OMS-2.

Adsorption performance of CMK-3 and C-FDU-15 in NO removal at low temperature

CMK-3 and C-FDU-15 samples were synthesized using hard-templating and evaporation-induced self-assembly (EISA) methods, respectively. The pore structures of CMK-3 and C-FDU-15 as well as commercial activated carbon were characterized by means of X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, and N₂ adsorption-desorption. Adsorption of NO was investigated by means of thermogravimetric analysis, temperature-programmed desorption of NO + O₂, and in situ diffuse reflectance Fourier transform infrared spectroscopy. The results show that the CMK-3 and C-FDU-15 materials possessed ordered and uniform structures. The co-adsorption capacity of NO and O₂ decreased in the sequence CMK-3 (88.6 mg/g) > C-FDU-15 (71.7 mg/g) > AC (25.3 mg/g). There were two main adsorption species on CMK-3 and C-FDU-15: nitrite and nitrate. Nitrite is converted to nitrate easily. However, the adsorption species were more complex on AC, with nitrite being the main species. Moreover, CMK-3 and C-FDU-15 exhibit excellent regeneration efficiency compared with AC. The excellent NO adsorption performance of CMK-3 and C-FDU-15 was associated with their ordered mesoporous structures and high surface areas. The research provides more options for NO adsorption in the future.

Porous hollow CoInOx nanocubes as a highly efficient catalyst for the catalytic combustion of toluene

Porous hollow HC-CoInOx nanocubes were synthesized via a SiO2 template strategy involving a cobalt-based metal-organic framework derived from a Prussian Blue analogue. As a heterogeneous catalytic material for the catalytic combustion of toluene, the hollow HC-CoInOx nanocubes displayed superior catalytic performance (T90 = 178 °C) and greatly reduced the activation energy for toluene oxidation due to their large surface area, the formation of surface dangling bands and oxygen vacancies, and increased number of weak acid sites. In comparison, the C-CoInOx sample (without the introduction of a SiO2 template) required a higher reaction temperature to achieve the same conversion of toluene (T90 = 345 °C). Especially, the insertion and coating of SiO2 in CoIn-PBA nanocubes greatly improves their thermal stability, and the nanocubic shape of the porous hollow HC-CoInOx sample can remain intact after roasting at 450 °C, while the nanocubic shape of the C-CoInOx sample without the introduction of SiO2 is partially damaged and suffers from serious aggregation under the same firing conditions. Simultaneously, the porous hollow HC-CoInOx nanocubes also exhibited excellent cycling and thermal stability for the catalytic combustion of toluene to CO2 and H2O.