Enhanced lithium storage performances of novel layered nickel germanate anodes inspired by the spatial arrangement of lotus leaves

Tuning the d-Band States of Ni-Based Serpentine Materials via Fe3+ Doping for Efficient Oxygen Evolution Reaction

The serpentine germanate materials are promising oxygen evolution reaction (OER) electrocatalysts due to their unique layered crystal structure and electronic structure. However, the catalytic activities still need to be improved to satisfy the practical applications. Adjusting the d-band center of metal active site to balance the adsorption and desorption of intermediates is considered an effective approach to improve the OER activity. In this work, an element dopant strategy was proposed to optimize the d-band state of Ni₃Ge₂O₅(OH)₄ serpentine to improve the OER activity. The density functional theory calculations revealed that Fe³⁺ doping increased the d-band center of the Ni₃Ge₂O₅(OH)₄ serpentine, which optimized the adsorption strength of intermediates on surface Ni and Fe atoms so that the Fe³⁺ doped Ni₃Ge₂O₅(OH)₄ (Ni_2.25Fe_0.75Ge₂O₅(OH)₄) exhibited much reduced Gibbs free energy changes in the rate-determining step compared with pristine serpentine. Inspired by the theoretical calculations, the Ni_xFe_3-xGe₂O₅(OH)₄ nanosheets with different amounts of doped Fe³⁺ were designed and synthesized. The structural characterizations indicated that Fe³⁺ was successfully doped into Ni₃Ge₂O₅(OH)₄ and replaced the Ni²⁺. The Fe³⁺ doped Ni_xFe_3-xGe₂O₅(OH)₄ nanosheets showed greatly improved OER activity than Ni₃Ge₂O₅(OH)₄ and Fe₃Ge₂O₅(OH)₄. Further electrochemical analysis illustrated that Fe³⁺ doping reduced the adsorptive/formative resistance of intermediates and the charge transfer resistance and facilitated the kinetic process of OER. The in situ Raman spectra indicated that the Fe³⁺ doped Ni₃Ge₂O₅(OH)₄ possesses a more active Ni-O bond than pristine Ni₃Ge₂O₅(OH)₄. This work provides an effective strategy to tune the d-band center of serpentines for efficient electrocatalytic OER.

Achieving High Lithium Storage Capacity and Long-Term Cyclability of Novel Cobalt Germanate Hydroxide/Reduced Graphene Oxide Anodes with Regulated Electrochemical Catalytic Conversion Process of Hydroxyl Groups

To develop ternary transition-metal germanate anodes with superior lithium storage performances for lithium-ion batteries, a novel capacity counterbalance approach in one compound is designed by introducing an electrocatalytic conversion-type component with a positive cycling trend to compensate the negative cycling trend of the GeO₂ component. Novel cobalt germanate hydroxide (CGH) nanoplates chemically bonded on reduced graphene oxide (RGO) sheets are thus synthesized with a mild one-pot hydrothermal approach, constructing maximal face-to-face contact interfaces with interfacial bonds to boost the electrochemical conversion reactions. Furthermore, the hydroxyl groups (Co-OH) of CGH nanoplates are regulated by thermal annealing treatments, thus controlling the capacity contribution resulting from the electrocatalytic conversion reaction of LiOH to exactly offset the capacity fading of GeO₂. The results on the CGH electrodes at different cycling potentials confirm the stepwise electrochemical reactions of Co, GeO₂, and LiOH. The equilibrium of these electrochemical reactions ensures a stable cycling capacity without obvious fluctuations. Consequently, the optimal CGH/RGO hybrid anode delivers a reversible capacity as high as 1136 mA h g^-1 at 0.1 A g^-1 until 100 cycles. It also exhibits a long cyclability with a retained capacity of 560 mA h g^-1 at 1 A g^-1 until 1000 cycles. This work demonstrates a general and efficient capacity counterbalance method to highly boost lithium storage performances in terms of high capacity and long-term cyclability.

Peanut Leaf-Inspired Hybrid Metal-Organic Framework with Humidity-Responsive Wettability: toward Controllable Separation of Diverse Emulsions

Damage to the responsive superwetting material by external stimuli during the responsive process has been a ticklish question in recent years. We overcome this barrier by imitating a peanut leaf and designing a humidity-responsive MIL-100 (Fe)/octadecylamine-coated stainless steel mesh (HR-MOS). Such a material shows superhydrophilicity when ambient humidity is higher than saturated humidity, while it shows superhydrophobicity and high adhesion to water when ambient humidity is lower than saturated humidity. The peanut leaf-like two-level nanostructure of MIL-100 (Fe) is speculated as the principal factor to bring about the binary synergy wettability of the material. Accordingly, the material can realize humidity-controlled separation of at least 12 types of emulsions along with satisfactory durability. The responsive condition of the material is mild and green, which does lower damage to the material and environment. This strategy is the first to realize humidity-responsive wettability transition and provides a novel approach for manually controlled environmental protection.

Cobalt Hydroxide Carbonate/Reduced Graphene Oxide Anodes Enabled by a Confined Step-by-Step Electrochemical Catalytic Conversion Process for High Lithium Storage Capacity and Excellent Cyclability with a Low Variance Coefficient

Transition metal carbonates/hydroxides have attracted much attention as appealing anode materials due to their considerable reversible electrochemical catalytic conversion capacity. However, their serious positive or negative trends with cycles caused by the electrochemical catalytic conversion seriously affect their practical applications. Herein, novel one-dimensional cobalt hydroxide carbonate (CHC) nanomaterials are tightly anchored on reduced graphene oxide (RGO) sheets via a facile one-pot hydrothermal synthesis, forming surface-confined domains to further restrict the electrochemical catalytic conversion process. The analysis on the cycled electrodes at varied potentials confirms that the added capacity of CHC arises from the step-by-step reversible reactions of Li₂CO₃ and LiOH under the electrochemical catalysis of Co metal generated by the conversion reaction of CHC. The reversible reaction of Li₂CO₃ is followed closely by that of LiOH in the discharge process, while the order is opposite in the charge process. Such a step-by-step electrochemical catalytic conversion process could confine each other to accommodate the volume change and avoid side reactions. The confined effect is further enhanced by limiting the width and length of the CHC, which are determined by regulating the nucleation and growth of CHC on the surface of RGO, leading to an extraordinary cyclability. The optimized CHC/RGO hybrid maintains a high reversible capacity of 1110 mA h g^-1 after 100 cycles at 0.1 A g^-1, which is much higher than the theoretical value of CHC (506 mA h g^-1) on the basis of the recognized conversion reaction. Furthermore, it keeps high reversible capacities of 755 and 506 mA h g^-1 after 200 cycles at 1 and 2 A g^-1, respectively, exhibiting a high-rate cyclability with the lowest coefficient of variance of 9.4% among the reported ones. The confined step-by-step electrochemical catalytic conversion process facilitates high lithium storage capacity and satisfactory cyclability with a pretty low variance coefficient.

Serpentine Ni3 Ge2 O5 (OH)4 Nanosheets with Tailored Layers and Size for Efficient Oxygen Evolution Reactions

Layered serpentine Ni₃ Ge₂ O₅ (OH)₄ is compositionally active and structurally favorable for adsorption and diffusion of reactants in oxygen evolution reactions (OER). However, one of the major problems for these materials is limited active sites and low efficiency for OER. In this regard, a new catalyst consisting of layered serpentine Ni₃ Ge₂ O₅ (OH)₄ nanosheets is introduced via a controlled one-step synthetic process where the morphology, size, and layers are well tailored. The theoretical calculations indicate that decreased layers and increased exposure of (100) facets in serpentine Ni₃ Ge₂ O₅ (OH)₄ lead to much lower Gibbs free energy in adsorption of reactive intermediates. Experimentally, it is found that the reduction in number of layers with minimized particle size exhibits plenty of highly surface-active sites of (100) facets and demonstrates a much enhanced performance in OER than the corresponding multilayered nanosheets. Such a strategy of tailoring active sites of serpentine Ni₃ Ge₂ O₅ (OH)₄ nanosheets offers an effective method to design highly efficient electrocatalysts.