Facile fabrication of porous ZnS nanostructures with a controlled amount of S vacancies for enhanced photocatalytic performances

Unveiling the Role of Sulfur Vacancies in Enhanced Photocatalytic Activity of Hybrids Photocatalysts

Photocatalysis represents a sustainable strategy for addressing energy shortages and global warming. The main challenges in the photocatalytic process include limited light absorption, rapid recombination of photo-induced carriers, and poor surface catalytic activity for reactant molecules. Defect engineering in photocatalysts has been proven to be an efficient approach for improving solar-to-chemical energy conversion. Sulfur vacancies can adjust the electron structure, act as electron reservoirs, and provide abundant adsorption and activate sites, leading to enhanced photocatalytic activity. In this work, we aim to elucidate the role of sulfur vacancies in photocatalytic reactions and provide valuable insights for engineering high-efficiency photocatalysts with abundant sulfur vacancies in the future. First, we delve into the fundamental understanding of photocatalysis. Subsequently, various strategies for fabricating sulfur vacancies in photocatalysts are summarized, along with the corresponding characterization techniques. More importantly, the enhanced photocatalytic mechanism, focusing on three key factors, including electron structure, charge transfer, and the surface catalytic reaction, is discussed in detail. Finally, the future opportunities and challenges in sulfur vacancy engineering for photocatalysis are identified.

Vacancy Engineering in 2D Transition Metal Chalcogenide Photocatalyst: Structure Modulation, Function and Synergy Application

Transition metal chalcogenides (TMCs) are widely used in photocatalytic fields such as hydrogen evolution, nitrogen fixation, and pollutant degradation due to their suitable bandgaps, tunable electronic and optical properties, and strong reducing ability. The unique 2D malleability structure provides a pre-designed platform for customizable structures. The introduction of vacancy engineering makes up for the shortcomings of photocorrosion and limited light response and provides the greatest support for TMCs in terms of kinetics and thermodynamics in photocatalysis. This work reviews the effect of vacancy engineering on photocatalytic performance based on 2D semiconductor TMCs. The characteristics of vacancy introduction strategies are summarized, and the development of photocatalysis of vacancy engineering TMCs materials in energy conversion, degradation, and biological applications is reviewed. The contribution of vacancies in the optical range and charge transfer kinetics is also discussed from the perspective of structure manipulation. Vacancy engineering not only controls and optimizes the structure of the TMCs, but also improves the optical properties, charge transfer, and surface properties. The synergies between TMCs vacancy engineering and atomic doping, other vacancies, and heterojunction composite techniques are discussed in detail, followed by a summary of current trends and potential for expansion.

Rational Design of Three Dimensional Hollow Heterojunctions for Efficient Photocatalytic Hydrogen Evolution Applications

The efficiency of photocatalytic hydrogen evolution is currently limited by poor light adsorption, rapid recombination of photogenerated carriers, and ineffective surface reaction rate. Although heterojunctions with innovative morphologies and structures can strengthen built-in electric fields and maximize the separation of photogenerated charges. However, how to rational design of novel multidimensional structures to simultaneously improve the above three bottleneck problems is still a research imperative. Herein, a unique Cu2O─S@graphene oxide (GO)@Zn0.67Cd0.33S Three dimensional (3D) hollow heterostructure is designed and synthesized, which greatly extends the carrier lifetime and effectively promotes the separation of photogenerated charges. The H2 production rate reached 48.5 mmol g-1 h-1 under visible light after loading Ni2+ on the heterojunction surface, which is 97 times higher than that of pure Zn0.67Cd0.33S nanospheres. Furthermore, the H2 production rate can reach 77.3 mmol g-1 h-1 without cooling, verifying the effectiveness of the photothermal effect. Meanwhile, in situ characterization and density flooding theory calculations reveal the efficient charge transfer at the p-n 3D hollow heterojunction interface. This study not only reveals the detailed mechanism of photocatalytic hydrogen evolution in depth but also rationalizes the construction of superior 3D hollow heterojunctions, thus providing a universal strategy for the materials-by-design of high-performance heterojunctions.

Facile synthesis of Zn0.5Cd0.5S nanosheets with tunable S vacancies for highly efficient photocatalytic hydrogen evolution

In order to effectively improve the separation efficiency of photogenerated charge carriers and thus the photocatalytic activity, in this work, porous Zn0.5Cd0.5S nanosheets with a controlled amount of S vacancies were prepared by a multistep chemical transformation strategy using the inorganic-organic hybrid ZnS-ethylenediamine (denoted as ZnS(en)0.5) as a hard template. The amount of S vacancies and the morphology of the Zn0.5Cd0.5S nanostructures were tailored by adjusting the hydrolysis time. Furthermore, we report the observation of S vacancies in porous Zn0.5Cd0.5S nanosheets at the atomic level using spherical aberration-corrected (Cs-aberrated) transmission electron microscopy (Cs-corrected-TEM). The results revealed that Zn0.5Cd0.5S nanosheets with S vacancies absorb more visible light and generate more electron-hole carriers due to their porous nanosheet structure. At the same time, sulfur vacancies are introduced into the Zn0.5Cd0.5S nanosheets to capture the electrons generated by the light and further extend the lifetime of the carriers. As expected, the photocatalytic activity of Zn0.5Cd0.5S nanosheets prepared by 4 h hydrolysis is 20.5 times higher than that of Zn0.5Cd0.5S(en)x intermediates. Moreover, Zn0.5Cd0.5S-4h showed excellent cycling stability. This work provides a new strategy for the optimization of Zn0.5Cd0.5S photocatalysts to improve photocatalytic hydrogen evolution.

Ultrasound assisted electrodeposition of photocatalytic antibacterial MoS2-Zn coatings controlled by sodium dodecyl sulfate

Photocatalytic MoS2 with visible light response is considered as a promising bactericidal material owing to its non-toxicity and high antibacterial efficiency. However, photocatalysts always exist as powder, so it is difficult to settle photocatalysts on the metal surface, which limits their application in aqueous environments. To solve this problem, ultrasound and sodium dodecyl sulfate (SDS) were introduced into the co-deposition process of MoS2 and zinc matrix, so that novel MoS2-Zn coatings were obtained. In this process, ultrasound and SDS strongly promoted the dispersion and adsorption of MoS2 on the co-depositing surfaces. Then MoS2 were proved to be composited into the Zn matrix with effective structures, and the addition of SDS effectively increased the loading content of MoS2 in the MoS2-Zn coatings. Besides, the antibacterial performance of the MoS2-Zn coatings was evaluated with three typical fouling bacteria E.coli, S.aureus and B.wiedmannii. The MoS2-Zn coating showed high and broad-spectrum antibacterial properties with over 98 % inhibition rate against these three bacteria. Furthermore, it is proved that the MoS2-Zn coatings generated superoxide (·O2-) and hydroxyl radicals (·OH) under visible light, which played the dominant and subordinate roles in the antibacterial process, respectively. The MoS2-Zn coatings also showed high antibacterial stability after four "light-dark" cycles. According to the results of the attached bacteria, the MoS2-Zn coatings were considered to effectively repel the living pelagic bacteria instead of killing the attached ones, which was highly environmentally friendly. The obtained MoS2-Zn coatings were considered promising in biofilm inhibiting and marine antifouling fields.

The Strain Effects and Interfacial Defects of Large ZnSe/ZnS Core/Shell Nanocrystals

The shell growth of large ZnSe/ZnS nanocrystals( is of great importance in the pursuit of pure-blue emitters for display applications, however, suffers from the challenges of spectral blue-shifts and reduced photoluminescence quantum yields. In this work, the ZnS shell growth on different-sized ZnSe cores is investigated. By controlling the reactivity of Zn and S precursors, the ZnS shell growth can be tuned from defect-related strain-released to defect-free strained mode, corresponding to the blue- and red-shifts of resultant nanocrystals respectively. The shape of strain-released ZnSe/ZnS nanocrystals can be kept nearly spherical during the shell growth, while the shape of strained nanocrystals evolutes from spherical into island-like after the critical thickness. Furthermore, the strain between ZnSe core and ZnS shell can convert the band alignment from type-I into type-II core/shell structure, resulting in red-shifts and improved quantum yield. By correlating the strain effects with interfacial defects, a strain-released shell growth model is proposed to obtain large ZnSe/ZnS nanocrystals with isotropic shell morphology.

Defect engineering for enhanced optical and photocatalytic properties of ZnS nanoparticles synthesized by hydrothermal method

Defect engineering is a promising method for improving light harvesting in photocatalytic materials like Zinc sulphide (ZnS). By altering the S/Zn molar ratio during hydrothermal processes, Zn and S defects are successfully introduced into the ZnS crystal. The band structures can be modified by adding defects to the crystal structure of ZnS samples. During the treatment process, defects are formed on the surface. XRD and Raman studies are used for the confirmation of the crystallinity and phase formation of the samples. Using an X-ray peak pattern assessment based on the Debye Scherer model, the Williamson-Hall model, and the size strain plot, it was possible to study the influence of crystal defect on the structural characteristics of ZnS nanoparticles. The band gap (Eg) values were estimated using UV-Vis diffuse spectroscopy (UV-Vis DRS) and found that the Eg is reduced from 3.28 to 3.49 eV by altering the S/Zn molar ratio. Photoluminescence study (PL) shows these ZnS nanoparticles emit violet and blue radiations. In keeping with the results of XRD, TEM demonstrated the nanoscale of the prepared samples and exhibited a small agglomeration of homogenous nanoparticles. Scanning electron microscopy (SEM) was used to examine the surface morphology of the ZnS particles. Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) and X-ray photoelectron spectroscopy (XPS) were used to evaluate and validate the elemental composition. XPS results indicate the presence of defects on the prepared ZnS nanoparticles. For the investigation of vacancy-dependent catalytic activity under exposure to visible light, defective ZnS with different quantities of Zn and S voids are used as catalysts. The lowest S/Zn sample, ZnS0.67 and the highest S/Zn sample, ZnS3, show superior photocatalytic activity.

Eco-friendly cubic-ZnS coupled Cu7S4 spines on chitosan matrix: Unravelling defect-engineered nanoplatform for the photodegradation of p-chlorophenol

Novel ZnS-Cu₇S₄ nanohybrid supported on chitosan matrix, as an ideal photocatalyst, was fabricated by the sonochemical method wherein high-resolution transmission electron microscopy (HRTEM) and X-ray powder diffraction (XRD) analysis confirmed the co-existence of both ZnS and Cu₇S₄; presence of vacancy sites in ZnS was verified by electron paramagnetic resonance (EPR) analysis and their introduction could promote two-photon excitation facilitated visible light response and charge transport/separation. The type II interface is formed in the ZnS-Cu₇S₄/Chitosan heterojunction owing to interstitial states that promote charge separation. The ZnS-Cu₇S₄/Chitosan was used for the photodegradation of a pharmaceutical pollutant, p-chlorophenol (PCP); over 98.8% of PCP photodegradation was achieved under visible-light irradiation where the ensued ·O₂^- and ·OH serve a key role in the photodegradation of PCP. In vitro cytotoxicity studies substantiated that the ZnS-Cu₇S₄/Chitosan is nontoxic to the ecosystem and human beings and endowed with promising photodegradation properties and accessibility via an environmentally friendly design, bodes well for its potential remediation applications.

Photocatalytic mechanism conversion of titanium dioxide induced via surface interface coordination

Photocatalytic removal of organic pollutants is a promising pollution treatment technology from the aspect of carbon neutrality. The complex diversity of actual wastewater components, as opposed to single-component systems, can significantly affect photocatalytic mechanisms. In this study, complex pollutant systems were created using various coordinating agents, and the effects of P25 on the photocatalytic removal of methyl orange (MO) in these systems and corresponding photocatalytic mechanism were investigated. The results show that photocatalytic removal of MO by P25 using ligands is significantly more efficient, especial removal of MO by the EDTA-P25 (P-E_2.5) coordination system resulted dramatically improved MO removal (97.4% versus 12.3% achieved by pure P25 after 15 min), with the reaction rate improved 23.8-fold. Theoretical calculations show that the effective coordination bonds formed by the coordinating agent and Ti atoms reduce the adsorption energy of P25 for MO. In addition, introduction of the coordinating agent EDTA reduces the transition state energy during the MO degradation process and greatly accelerates the reaction rate, and the conduction band position of the EDTA-P25 coordination system shifts to a more negative potential, which induces to the generation of •O₂^- for effective MO degradation.

CuO loaded ZnS nanoflower entrapped on PVA-chitosan matrix for boosted visible light photocatalysis for tetracycline degradation and anti-bacterial application

Novel photocatalyst CuO loaded ZnS nanoflower supported on carbon frame work PVA/Chitosan was synthesized by co-precipitation and ultrasonic assisted method. The co-existence of ZnS and CuO and its crystallinity in nanohybrid was verified by XRD, SAED and HR-TEM analysis. The availability of defects in ZnS was identified by EPR. FTIR and TGA verified the presence of PVA and Chitosan. Defects mediated ZnS-CuO/PVA/chitosan heterojunction promote synergistic charge separation with type II interface. Zn-vacancy facilitates two-photon excitation that improves visible-light harvesting. The photocatalytic activity of ZnS-CuO/PVA/Chitosan was 94.7% which is higher when compared to ZnS (40%) and CuO (60%). The photocatalytic mechanism was elucidated using scavenger test and both ·O₂^- and ·OH were found to play key role in tetracycline degradation. In addition, ZnS-CuO/PVA/Chitosan demonstrated efficient anti-microbial effect against the both gram strains on comparing with individual ZnS and CuO. Thus, the multifunctional ZnS-CuO/PVA/Chitosan is promising for the photocatalytic degradation of tetracycline and as an antimicrobial agent.

Controllable sulphur vacancies confined in nanoporous ZnS nanoplates for visible-light photocatalytic hydrogen evolution

Controllable sulphur vacancies (S_v) confined in nanoporous ZnS nanoplates (S_v-ZnS) were prepared successfully via rapid heat treatment of ZnS(en)_0.5 nanoplates. S_v with controllable concentrations originating from the in situ doping of N atoms endowed S_v-ZnS with a visible-light photocatalytic H₂ production activity, having a positive linear correlation with S_v concentration.

Core-shell structure of sulphur vacancies-CdS@CuS: Enhanced photocatalytic hydrogen generation activity based on photoinduced interfacial charge transfer

To regulate the charge flow of the photocatalyst in photocatalytic hydrogen reactions is highly desirable. In this study, a highly efficient sulphur vacancies-CdS@CuS core-shell heterostructure photocatalyst (denoted CdS-SV@CuS) was developed through the surface modification of CdS-sulphur vacancies (SV) nanoparticles by CuS based on photoinduced interfacial charge transfer (IFCT). This novel photocatalyst with modulated charge transfer was prepared by hydrothermal treatment and subsequent cation-exchange reactions. The SV confined in CdS and the IFCT facilitate the charge carrier's efficient spatial separation. The optimized CdS-SV@CuS(5%) catalyst exhibited a remarkably higher H₂ production rate of 1654.53 μmol/g/h, approximately 6.7 and 4.0 times higher than those of pure CdS and CdS-SV, respectively. The high photocatalytic performance is attributed to the rapid charge separation, caused by the intimate interactions between CdS-SV and CuS in the core-shell heterostructure. This is the first time that a straightforward method is adopted to construct a metal sulphide core-shell structure for superior H₂-production activity by IFCT.

Atomic-Level Charge Separation Strategies in Semiconductor-Based Photocatalysts

Semiconductor-based photocatalysis as a productive technology furnishes a prospective solution to environmental and renewable energy issues, but its efficiency greatly relies on the effective bulk and surface separation of photoexcited charge carriers. Exploitation of atomic-level strategies allows in-depth understanding on the related mechanisms and enables bottom-up precise design of photocatalysts, significantly enhancing photocatalytic activity. Herein, the advances on atomic-level charge separation strategies toward developing robust photocatalysts are highlighted, elucidating the fundamentals of charge separation and transfer processes and advanced probing techniques. The atomic-level bulk charge separation strategies, embodied by regulation of charge movement pathway and migration dynamic, boil down to shortening the charge diffusion distance to the atomic-scale, establishing atomic-level charge transfer channels, and enhancing the charge separation driving force. Meanwhile, regulating the in-plane surface structure and spatial surface structure are summarized as atomic-level surface charge separation strategies. Moreover, collaborative strategies for simultaneous manipulation of bulk and surface photocharges are also introduced. Finally, the existing challenges and future prospects for fabrication of state-of-the-art photocatalysts are discussed on the basis of a thorough comprehension of atomic-level charge separation strategies.

Light-Driven Syngas Production over Defective ZnIn2 S4 Nanosheets

Photocatalytic syngas (CO and H₂ ) production with CO₂ as gas source not only ameliorates greenhouse effect, but also produces valuable chemical feedstocks. However, traditional photocatalytic systems require noble metal or suffers from low yield. Here, we demonstrate that S vacancies ZnIn₂ S₄ (V_S -ZnIn₂ S₄ ) nanosheets are an ideal photocatalyst to drive CO₂ reduction into syngas. It is found that building S vacancies can endow ZnIn₂ S₄ with stronger photoabsorption, efficient electron-hole separation, and larger CO₂ adsorption, finally promoting both hydrogen evolution reaction (HER) and CO₂ reduction reaction (CO₂ RR). The syngas yield of CO and H₂ is therefore significantly increased. In contrast to pristine ZnIn₂ S₄ , the syngas yield over V_S -ZnIn₂ S₄ can be improved by roughly ≈4.73 times and the CO/H₂ ratio is modified from 1:4.18 to 1:1. Total amount of syngas after 12 h photocatalysis is as high as 63.20 mmol g^-1 without use of any noble metals, which is even higher than those of traditional noble metal-based catalysts in the reported literatures. This work demonstrates the critical role of S vacancies in mediating catalytic activity and selectivity, and highlights the attractive ability of defective ZnIn₂ S₄ for light-driven syngas production.

Design and synthesis of robust Z-scheme ZnS-SnS2 n-n heterojunctions for highly efficient degradation of pharmaceutical pollutants: Performance, valence/conduction band offset photocatalytic mechanisms and toxicity evaluation

Petal-like ZnS-SnS₂ heterojunctions with Z-scheme band alignment were prepared by one-pot solvothermal strategy. The optimal (1:1) ZnS-SnS₂ can degrade 93.46 % of tetracycline and remove 73.9 % COD of pharmaceutical wastewater under visible-light irradiation due to the efficient production of H, O₂^-, h⁺ and OH. The toxicity evaluation by ECOSAR prediction and the growth of E. coli indicates efficient toxicity reduction of tetracycline by photocatalysis and the non-toxicity of ZnS-SnS₂. The attacked sites on tetracycline by reactive species were analyzed according to Fukui index, and two degradation pathways of tetracycline were inferred via the identification of intermediate products. Tetracycline degradation efficiency and the energy consumption in different water bodies were compared, and it was found that the electrical energy per order (EE/O) was the lowest in Ganjiang River. The valence band offset (ΔE_VBO) and conduction band offset (ΔE_CBO) of ZnS-SnS₂ were 1.02 eV and 0.22 eV, respectively. The probable photocatalytic mechanism of ZnS/SnS₂ heterojunctions with Z-scheme band alignment based on ΔE_VBO and ΔE_CBO was first presented.

Steering the Charge Kinetics in Dual-Functional Photocatalysis by Surface Dipole Moments and Band Edge Modulation: A Defect Study in TiO2-ZnS-rGO Composites

Developing an efficient photocatalyst for concurrent hydrogen production and environmental remediation by using solar energy is a challenge. Defect engineering, although it offers a strategical promise to enhance the photocatalytic performance, has limitations that come from the ambiguity surrounding its role. In the current work, a comprehensive study on defects in promoting the charge transfer, band edge modulation, and surface reaction was carried out. The excess electrons springing from defects act like donor states and cause band bending at the junction interface. Characterization techniques such as X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, electron spin resonance, and photoluminescence were employed to investigate defect functionality, and its ultimate effect on photocatalytic performance was studied by simultaneous H₂ production and methylene blue degradation. The role of graphene in optoelectronics and defect formation in the composite catalysts was explored. In addition, efforts have been made to unveil the reaction pathway for hydrogen evolution reaction and oxygen evolution reaction where excess defect density greatly hampered the quantum yield of the process. Results suggest that maintaining optimal defect concentration aborts the undesired thermodynamically favored back reactions. The conduction band and valence band values of the catalysts indicate that the photocatalytic mechanism was dominated by the electron pathway. Graphene acted as an effective electron sink when its concentration was around 2.5-3%. The superior activity of TiO₂-ZnS-rGO was attributed to the narrow bandgap, rapid separation of photo-excited charge carriers, and favorable conduction band position for photocatalytic reactions. This work may assist in exploring the fundamental role of defects in driving the photocatalytic reactions and improve the selectivity in heterogeneous photocatalysis.

Sulfur Vacancy-Rich O-Doped 1T-MoS2 Nanosheets for Exceptional Photocatalytic Nitrogen Fixation over CdS

Here, we reported that sulfur vacancy-rich O-doped 1T-MoS₂ nanosheets (denoted as SV-1T-MoS₂) can surpass the activity of Pt as cocatalysts to assist in the photocatalytic nitrogen fixation of CdS nanorods. SV-1T-MoS₂ cocatalysts exhibit sulfur vacancies, O-doping, more metallic 1T phase, and high electronic conductivity, thus leading to the exposure of more active edge sites, high Brunauer-Emmett-Teller surface area, enhanced visible light absorption, and improved electron separation and transfer, which are beneficial for photocatalytic nitrogen fixation. Consequently, the optimized 30 wt % SV-1T-MoS₂-/CdS composites exhibit an outstanding nitrogen fixation rate of 8220.83 μmol L^-1 h^-1 g^-1 and long-term stability under simulated solar light irradiation, significantly higher than pure CdS nanorods, CdS-Pt (0.1 wt %), and 30 wt % 1T-MoS₂/CdS composites. The catalytic mechanism of photocatalytic nitrogen fixation on SV-1T-MoS₂ is discussed by density functional theory calculations.

Surface defect engineering of mesoporous Cu/ZnS nanocrystal-linked networks for improved visible-light photocatalytic hydrogen production

Cu-doped ZnS nanocrystal-linked mesoporous frameworks possessing suitable electronic energy levels, strong visible-light absorption and large porosity with a low defective surface show efficient photocatalytic H₂ evolution activity from water splitting.

Self-templated microwave-assisted hydrothermal synthesis of two-dimensional holey hydroxyapatite nanosheets for efficient heavy metal removal

Heavy metals have caused serious environmental problems and threat to human health. Ultrathin and holey two-dimensional (2D) nanosheets have recently drawn significant attention as superb adsorbent material to remove heavy metal ions due to their unique physicochemical properties. Herein, we report a self-template-directed ultrafast reaction route to synthesis porous hydroxyapatite (Ca₁₀(PO₄)₆(OH)₂) nanosheets via a microwave-assisted hydrothermal method using poly(allylamine hydrochloride) as an additive. The resulting hydroxyapatite nanosheets showed a high specific surface area (92.9 m² g^-1) and excellent adsorption performance for various heavy metal ions including Pb(II), Cu(II), and Cd(II), with maximum adsorption capacities of 210.5, 31.6, and 24.9 mg g^-1, respectively. The adsorption kinetics fitted well with the pseudo-second-order equation and the equilibrium data showed a high correlation coefficient with the Langmuir model. Based on the experimental results and analysis, we can conclude that the sorption of heavy metal ions with the hydroxyapatite nanosheets mainly attributes to surface complexation and cation exchange. The present synthetic strategy allows the fast and massive production of porous hydroxyapatite ultrathin nanosheets and may also potentially be applicable to the fabrication of other metal phosphates with assembled or hierarchical porous structures towards various applications such as water purification.

Oxygen Vacancy Enhanced Photoreduction Cr(VI) on Few-Layers BiOBr Nanosheets

2D nanomaterials, with unique structural and electronic features, had been demonstrated as excellent photocatalysts, whose catalytic properties could be tunable with surface defect engineering. In this work, few-layer BiOBr nanosheets with oxygen vacancies (BiOBr-Ov) have been fabricated by a simple solvothermal reaction with the help of ethylene glycol. The obtained BiOBr-Ov exhibited the superior photocatalytic performance with a complete reduction of Cr(VI) (20 mg/L) within 12 min by visible light irradiation. Moreover, Cr(VI) with a high concentration (such as 30 mg/L) only requires 2 min to be photoreduced completely under solar light irradiation. The enhanced photocatalytic performance is contributed to the existence of oxygen vacancies. It has been proved by the results of electrochemical impedance and photocurrent that oxygen vacancies can effectively suppress recombination of photogenerated carriers.

Coordination Complex Transformation-Assisted Fabrication for Hollow Chestnut-Like Hierarchical ZnS with Enhanced Photocatalytic Hydrogen Evolution

Hierarchical nanostructures (HNs) are possibly endowed with novel properties due to their complex three-dimensional (3D) structures. Here, we provide a novel stepwise growth strategy of Coordination Complex Transformation-Assisted Growth for fabricating HNs. By using this, we prepare a new wurtzite ZnS HNs-hollow chestnut-like hierarchical microspheres (HCHMs), which are mesoporous hollow microspheres with single crystalline nanorods arrayed densely and radially from the centre. The HCHMs formation depends on the stepwise decomposition of the two Zn2+ complexes ([Zn(en)m(H₂O)2(3-m)]2+ and [Zn(en)m(NH₃)2(3-m)]2+, natural number m < 3). As the reaction proceeds, [Zn2+] has been distinctly reduced due to the transformation from [Zn(en)m(H₂O)2(3-m)]2+ to [Zn(en)m(NH₃)2(3-m)]2+ with a high stability constant, leading to a low crystal growth rate to obtain single crystalline nanorods. Additionally, the generated bubbles (CO₂, NH₃) acting as a template can induce the generation of hollow structure. The as-prepared ZnS HCHMs show an enhanced photocatalytic hydrogen evolution activity due to the single crystalline wurtzite phase and the high surface area contributed by the hollow hierarchical structures, as well as the mesoporosity. The versatility of the coordination complex transformation-assisted growth strategy will open up new possibilities for fabricating HNs, especially for those transition metal ions with excellent complex capabilities.

Photocatalytic 4-nitrophenol degradation and oxygen evolution reaction in CuO/g-C3N4 composites prepared by deep eutectic solvent-assisted chlorine doping

Heterostructured Cl-CuO/g-C₃N₄ composite for OER and photocatalytic 4-nitrophenol degradation.

One-step facile synthesis and high H2-evolution activity of suspensible CdxZn1-xS nanocrystal photocatalysts in a S2-/SO32- system

For a CdS-based photocatalyst, both the photocorrosion resistance and the rapid H₂-production reaction are highly required for improving its photocatalytic H₂-production performance. In this study, a facile strategy was reported to simultaneously realize an improved photocorrosion resistance and rapid interfacial H₂-evolution reaction of Cd_xZn_1-xS solid-solution photocatalysts in a sulfur-rich S^2-/SO₃^2- solution. Here, the suspensible Cd_xZn_1-xS nanocrystal photocatalysts are prepared by a one-step co-precipitation route through the direct introduction of Zn²⁺/Cd²⁺ mixing ions in a sulfur-rich Na₂S-Na₂SO₃ solution, and the resultant Cd_xZn_1-xS nanocrystals (ca. 5 nm) display a suspensible structure owing to the numerous and selective adsorption of S^2-/SO₃^2- on the surface of these Cd_xZn_1-xS nanocrystals. It is found that the bandgap structure of Cd_xZn_1-xS (from 2.25 to 3.52 eV) nanocrystals can be easily controlled by adjusting the Cd²⁺/Zn²⁺ molar ratio. The photocatalytic experimental results suggested that the suspensible Cd_xZn_1-xS nanocrystal photocatalysts clearly displayed an excellent photocatalytic H₂-production performance, and the suspensible Cd_0.6Zn_0.4S nanocrystals exhibit the highest photocatalytic H₂-generation performance of 717.19 μmol h^-1, a value higher than that of the sole CdS (320.99 μmol h^-1) and ZnS (5.89 μmol h^-1) by a factor of 2.2 and 121.8 times, respectively. Based on the experimental results, a possible S^2- active site-mediated mechanism accounted for the high H₂-production activity of the suspensible Cd_xZn_1-xS nanocrystals, namely the numerous adsorbed S^2- ions not only function as efficient hole scavengers to rapidly consume the photogenerated holes, resulting in an improved photocorrosion resistance of suspensible Cd_xZn_1-xS nanocrystals, but also serve as effective H⁺-capturing active sites to accelerate the interfacial H₂-production reaction. Meanwhile, an optimum bandgap structure of suspensible Cd_xZn_1-xS nanocrystals is also extremely required for promoting the photocatalytic H₂-production activity. This research may provide advanced insights for developing stable and high-activity photocatalytic materials.

In situ sulfuration synthesis of flexible PAN-CuS “flowering branch” heterostructures as recyclable catalysts for dye degradation

“Flowering branch”-like PAN-CuS hierarchical heterostructures were in situ synthesized through a facile hydrothermal sulfuration growth process on PAN-based fibers prepared by electrospinning. The PAN fibers can serve as a stable flexible support, while CuS flowers assembled from nanosheets can act as reactive materials, showing high performance in the degradation of dyes. Moreover, these heterostructures can be recovered easily without a decrease in their photocatalytic activity, thus showing favorable recycling capability.

“Flowering branch”-like PAN-CuS hierarchical heterostructures were in situ synthesized through a facile hydrothermal sulfuration growth process on PAN-based fibers prepared by electrospinning.