N-(Aminobutyl)-N-(ethylisoluminol)-functionalized gold nanoparticles on cobalt disulfide nanowire hybrids for the non-enzymatic chemiluminescence detection of H2O2

Ultrasensitive PD-L1-Expressing Exosome Immunosensors Based on a Chemiluminescent Nickel-Cobalt Hydroxide Nanoflower for Diagnosis and Classification of Lung Adenocarcinoma

Programmed death ligand-1 (PD-L1)-expressing exosomes are considered a potential marker for diagnosis and classification of lung adenocarcinoma (LUAD). There is an urgent need to develop highly sensitive and accurate chemiluminescence (CL) immunosensors for the detection of PD-L1-expressing exosomes. Herein, N-(4-aminobutyl)-N-ethylisopropanol-functionalized nickel-cobalt hydroxide (NiCo-DH-AA) with a hollow nanoflower structure as a highly efficient CL nanoprobe was synthesized using gold nanoparticles as a "bridge". The resulting NiCo-DH-AA exhibited a strong and stable CL emission, which was ascribed to the exceptional catalytic capability and large specific surface area of NiCo-DH, along with the capacity of AuNPs to facilitate free radical generation. On this basis, an ultrasensitive sandwich CL immunosensor for the detection of PD-L1-expressing exosomes was constructed by using PD-L1 antibody-modified NiCo-DH-AA as an effective signal probe and rabbit anti-CD63 protein polyclonal antibody-modified carboxylated magnetic bead as a capture platform. The immunosensor demonstrated outstanding analytical performance with a wide detection range of 4.75 × 103-4.75 × 108 particles/mL and a low detection limit of 7.76 × 102 particles/mL, which was over 2 orders of magnitude lower than the reported CL method for detecting PD-L1-expressing exosomes. Importantly, it was able to differentiate well not only between healthy persons and LUAD patients (100% specificity and 87.5% sensitivity) but also between patients with minimally invasive adenocarcinoma and invasive adenocarcinoma (92.3% specificity and 52.6% sensitivity). Therefore, this study not only presents an ultrasensitive and accurate diagnostic method for LUAD but also offers a novel, simple, and noninvasive approach for the classification of LUAD.

Novel electrochemiluminescence aptasensor based on AuNPs-ABEI encapsulated TiO2 nanorod for the detection of acetamiprid residues in vegetables

Gold nanoparticles (AuNPs)@N-(4-aminobutyl)-N-ethylisoluminol (ABEI)@Titanium dioxide nanorods (TiO2NRs) were used as sensing materials to produce a unique encapsulated nanostructure aptasensor for the detection of acetamiprid residues in this work. ABEI, an analog of luminol, was extensively used as an electrochemiluminescence (ECL) reagent. The ECL mechanism of ABEI- hydrogen peroxide (H2O2) system had connections to a number of oxygen-centered free radicals. TiO2NRs improved ECL response with high electron transfer and a specific surface area. AuNPs were easy to biolabel and could catalyze H2O2 to enhance ECL signal. AuNPs were wrapped around TiO2NRs by utilizing the reduction property of ABEI to form wrapped modified nanomaterials. The sulfhydryl-modified aptamer bound to the nanomaterial by forming gold-sulfur (Au-S) bonds. The aptamer selectively bound to its target with the addition of acetamiprid, which caused a considerable decrease in ECL intensity and enabled quantitative detection of acetamiprid. The aptasensor showed good stability, repeatability and specificity with a broad detection range (1×10-2-1×103 nM) and a lower limit of detection (3 pM) for acetamiprid residues in vegetables. Overall, this aptasensor presents a simple and highly sensitive method for ECL detecting acetamiprid, with potential applications in vegetable safety monitoring.

Nanomaterials-based biosensor and their applications: A review

A sensor can be called ideal or perfect if it is enriched with certain characteristics viz., superior detections range, high sensitivity, selectivity, resolution, reproducibility, repeatability, and response time with good flow. Recently, biosensors made of nanoparticles (NPs) have gained very high popularity due to their excellent applications in nearly all the fields of science and technology. The use of NPs in the biosensor is usually done to fill the gap between the converter and the bioreceptor, which is at the nanoscale. Simultaneously the uses of NPs and electrochemical techniques have led to the emergence of biosensors with high sensitivity and decomposition power. This review summarizes the development of biosensors made of NPssuch as noble metal NPs and metal oxide NPs, nanowires (NWs), nanorods (NRs), carbon nanotubes (CNTs), quantum dots (QDs), and dendrimers and their recent advancement in biosensing technology with the expansion of nanotechnology.

Development of a novel chitosan-based two-photon fluorescent nanoprobe with enhanced stability for the specific detection of endogenous H2O2

Hydrogen peroxide (H₂O₂) acts as an important reactive oxygen species (ROS) and maintains the redox equilibrium in organisms. Imbalance of H₂O₂ concentration is associated with the development of many diseases. Traditional small molecular based fluorescent probes often show drawbacks of cytotoxicity and easily metabolic clearance. Herein, a chitosan-based two-photon fluorescent nanoprobe (DC-BI) was constructed and applied for H₂O₂ detection in live organisms. DC-BI was composed by chitosan nanoparticles and a two-photon fluorophore of naphthalimide analogues (BI) with H₂O₂-responsive property. The structure of DC-BI was characterized by NMR, FTIR, XPS, XRD, DLS and MLS analyses. As study shown, the nanoprobe DC-BI exhibited improved distribution stability and smaller cytotoxicity. In the presence of H₂O₂, both the absorption and emission spectra show dramatic changes, the fluorescence intensity at 580 nm obviously enhanced. Furthermore, fluorescence imaging results indicate that DC-BI is capable of imaging endogenous H₂O₂ in cells and zebrafish. The design and development of chitosan-based nanoprobe DC-BI has provided a general example of nanoprobe construction with excellent distribution stability, two-photon property, and biocompatibility.

Electrochemical monitoring of hydrogen peroxide by a signal-amplified microfluidic chip coupled with colloidal VO2 nanostructures as a peroxidase enzyme mimic

We present a novel electrochemical microfluidic device for the sensitive and selective detection of hydrogen peroxide (H₂O₂) through a VO₂ nanostructure enzyme mimic. The low-cost ($0.50) microfluidic chip was fabricated using a simple and rapid prototyping technique via three syringe needles. Each needle played the role of an electrode (working, reference, and counter), and was connected by micro-hoses to a construction of the electrochemical microfluidic chip. The colloidal VO₂ nanoflakes with peroxidase-like activity could be easily transferred on to the electrodes by a syringe, for development of a novel electrochemical platform to enable the detection of H₂O₂. The unique microfluidic electrochemical sensor delivered a wide linear dynamic range from 0.5 to 300 μM, with a limit of detection of 0.14 μM. The facile, rapid, sensitive, and selective as-fabricated H₂O₂ sensors were proven to be appropriate for the real-time monitoring of H₂O₂ released from PC12 cells. The integration of a microfluidic sensor with an enzyme mimic nanostructure is essentially a promising strategy for the low-cost and accurate monitoring of physiological processes.

An enhanced chemiluminescence hybrids of luminol by sulfonated polyaniline decorated copper-based metal organic frame composite applicable to the measurement of hydrogen peroxide in a wide pH range

Here, sulfonated polyaniline (SPAN) was decorated on the surface of copper-based metal organic frame (HKUST-1) and the composite was functionalized by luminol to construct a chemiluminescence (CL) hybrids (SPAN/HKUST-1@Luminol). The as-prepared SPAN/HKUST-1@Luminol demonstrated a great dispersion and stability performance in aqueous solution. Moreover, the resultant SPAN/HKUST-1@Luminol hybrids exhibited extremely strong CL properties, and the CL quantum yield was 136 times higher than that of luminol. In particular, it exhibited outstanding CL activity not only under alkaline conditions, but also under neutral conditions. The sensitive response of the hybrid to hydrogen peroxide was used to construct CL methods for the detection of hydrogen peroxide at a wide range of pH, with the detection limit of 60 nM at a neutral condition and 25 pM at alkaline condition. Due to strong and stable signal of the SPAN/HKUST-1@Luminol, the CL method provides a viable tool for determination of H₂O₂ in biological systems and enabled the monitoring of stimulated production of H₂O₂ released by living cells.

Efficient Electrochemical Detection of Hydrogen Peroxide Based on Silver-Centered Preyssler-Type Polyoxometalate Hybrids

Four polyoxometalate (POM)-based organic-inorganic hybrid compounds, namely, (H₂bimb)₆H₈[((Mn(H₂O)₃(μ-bimb))_0.5(Mn(H₂O)₄)(Mn(H₂O)₅)_0.5(AgP₅W₃₀O₁₁₀))₂]·29H₂O (1), [(Cu(Hbimb)(H₂O)₂(μ-bimb)Cu(Hbimb)(H₂O))(Cu(H₂O)₂(μ-bimb)Cu(H₂O)₃)((Cu(H₂O)₂)_0.5(μ-bimb)(Cu(H₂O)₃)_0.5)H₂(AgP₅W₃₀O₁₁₀)]·12.5H₂O (2), (H₂bimb)₂H[(Zn(Hbimb)(H₂O)₄(Zn(Hbimb)(H₂O)₂)_0.5)₂(AgP₅W₃₀O₁₁₀)]·12H₂O (3), and (H₂bimb)₃H₂[(Ag(H₂O)₂)_0.5(Ag(Hbimb)Ag(Hbimb)(μ-bimb)Ag)(Ag(H₂O)₂)_0.5(AgP₅W₃₀O₁₁₀)]·7H₂O (4) (bimb = 1,4-bis(1H-imidazol-1-yl)benzene), were hydrothermally synthesized using a silver-centered Preyssler-type POM K₁₄[AgP₅W₃₀O₁₁₀]·18H₂O (abbreviated as K-{AgP₅W₃₀}) as a precursor. In 1-4, {AgP₅W₃₀} clusters integrating the merits of Ag⁺ and {P₅W₃₀} units are modified by different transition metal (TM)-organic fragments to extend the structures into three-dimensional frameworks. As nonenzymatic electrochemical sensor materials, 1-4 show good electrocatalytic activity, high sensitivity, and a low detection limit for detecting hydrogen peroxide (H₂O₂); 4 possesses the highest sensitivity of 195.47 μA·mM^-1·cm^-2 for H₂O₂ detection. Most importantly, the average level of H₂O₂ detection of these {AgP₅W₃₀}-based materials outperforms that of Na-centered Preyssler-type {NaP₅W₃₀} and most Keggin-type POM-based materials. The performances of such {AgP₅W₃₀} materials mainly stem from the unique advantage of high-negatively charged {AgP₅W₃₀} clusters together with the good synergistic effect between {AgP₅W₃₀} and TMs. This work expands on the research of high-efficiency POM-based nonenzymatic electrochemical H₂O₂ sensors using Ag-containing POMs with high negative charges, which is also of great theoretical and practical significance to carry out health monitoring and environmental analysis.

Low-Triggering-Potential Electrochemiluminescence from a Luminol Analogue Functionalized Semiconducting Polymer Dots for Imaging Detection of Blood Glucose

In recent years, semiconducting polymer dots (Pdots) as environmentally friendly and high-brightness electrochemiluminescence (ECL) nanoemitters have attracted intense attention in ECL biosensing and imaging. However, most of the available Pdots have a high ECL excitation potential in the aqueous phase (>1.0 V vs Ag/AgCl), which causes poor selectivity in actual sample detection. Therefore, it is particularly important to construct a simple and universal strategy to lower the trigger potential of Pdots. This work has realized the ECL emission of Pdots at low-trigger-potential based on the electrochemiluminescence resonance energy transfer (ERET) strategy. By covalently coupling the Pdots with a luminol analogue, N-(4-aminobutyl)-N-ethylisoluminol (ABEI), the ABEI-Pdots showed an anodic ECL emission with a low onset potential of +0.34 V and a peak potential at +0.45 V (vs Ag/AgCl), which was the lowest trigger potential reported so far. We further explored this low-triggering-potential ECL for imaging detection of glucose in buffer and serum. By imaging the ABEI-Pdots-modified screen-printed electrodes (SPCE) at +0.45 V for 16 s, the ECL imaging method could quantify the glucose concentration in buffer from 10 to 200 μM with detection limits of 3.3 μM, while exhibiting excellent selectivity. When applied to real serum, the results of our method were highly consistent with a commercial blood glucose meter, with the relative errors ranging from 3.2 to 13%. This work provided a universal strategy for constructing low potential Pdots and demonstrated its application potential in complex biological sample analysis.

Three-dimensional MoS2 nanoflowers supported Prussian blue and Au nanoparticles: A peroxidase-mimicking catalyst for the colorimetric detection of hydrogen peroxide and glucose

Well-dispersed Prussian blue (PB) and Au nanoparticles (Au NPs) loaded three dimensional MoS₂ nanoflowers (PB-Au@MoS₂ NFs) was synthesized by a simple and economical method. The structure, morphology and composition of the hybrid were characterized by XRD, SEM and EDS. Similar to the reported literature, MoS₂ nanoflowers showed peroxidase-like activity in catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). This peroxidase-mimicking activity could be enhanced with the introduction of PB and Au NPs. Herein, PB-Au@MoS₂ NFs could be used to establish a new platform for the determination of H₂O₂ and glucose by the chromogenic reaction. Wide linear ranges with 0-15 μM and 0-120 μM for H₂O₂ and glucose detection were finally obtained. The detection limits were as low as 0.25 μM and 3 μM (with signal to noise ratio of 3), respectively. The established platform was also used successfully for the determination of glucose in human serum and fruit juice samples with excellent sensitivity and stability.

Preyssler-type polyoxometalate-based crystalline materials for the electrochemical detection of H2O2

Four Preyssler-type polyoxometalate-based organic–inorganic hybrid materials were synthesized as non-enzymatic H₂O₂ electrochemical sensors, with high sensitivity and low detection limit.

Nanomaterial-enhanced chemiluminescence reactions and their applications

Chemiluminescence (CL) analysis is a trace analytical method that possesses advantages including high sensitivity, wide linear range, easy operation, and simple instruments. With the development of nanotechnology, many nanomaterial (NM)-enhanced CL systems have been established in recent years and applied for the CL detection of metal ions, anions, small molecules, tumor markers, sequence-specific DNA, and RNA. This review summarizes the research progress of the nanomaterial-enhanced CL systems the past five years. These CL reactions include luminol, peroxyoxalate, lucigenin, ultraweak CL reactions, and so on. The CL mechanisms of the nanomaterial-enhanced CL systems are discussed in the first section. Nanomaterials take part in the CL reactions as the catalyst, CL emitter, energy acceptor, and reductant. Their applications are summarized in the second section. Finally, the challenges and opportunities are discussed.

Regulating Heterogeneous Catalysis of Gold Nanoparticles with Polymer Mechanochemistry

Polymer mechanochemistry has emerged as a unique approach to regulate homogeneous catalysis in chemical transformations. The utilization of polymer mechanochemistry to regulate heterogeneous catalysis, however, still remains to be investigated. In this study, using polymer-grafted gold nanoparticles as the model heterogeneous catalysts, we show that polymer chains can be mechanically ruptured from the surface of gold nanoparticles, and thus, the catalytic activity of gold nanoparticles can be accelerated under sonication. The mechanical activation of polymer-grafted gold nanoparticles only occurs when the grafted polymer chains exceed a threshold molecular weight. This mechanical behavior is similar to those mechanophore-linked polymers. More importantly, further characterizations reveal that the Au-Au bonds instead of the Au-S bonds are broken at the heterointerfaces of polymer chains and gold nanoparticles. Our study unveils an unprecedented characteristic of polymer-grafted metallic nanoparticles in response to external mechanical stress.

Aqueous stable Pd nanoparticles/covalent organic framework nanocomposite: an efficient nanoenzyme for colorimetric detection and multicolor imaging of cancer cells

Accurate, sensitive detection of cancer cells from clinical fluids is helpful for screening and early diagnosis of tumors. Here, we develop a facile approach for in situ growth of palladium nanoparticles in an aqueous stable carboxymethyl cellulose-modified covalent organic framework hydrogel (named Pd NPs/CMC-COF-LZU1). The resulting nanocomposite has been proven to show superior catalytic performance for the transformation of N-butyl-4-NHAlloc-1,8-naphthalimide (NNPH) into N-butyl-4-amido-1,8-naphthalimide (NPH), indicated by significant changes in both color and fluorescence. Based on these features, the designed nanocomposite was used as a signal transducer to develop a colorimetric assay and multicolor imaging for accurate and sensitive detection of cancer cells. The transformation of NNPH into NPH enabled the detection system to perform multicolor imaging of HeLa cells. By using folic acid (FA) as a recognition element, a total of 100 cancer cells (HeLa) can be distinguished in 1 mL culture medium with 10% FBS. We envision that these COF-based composite materials (Pd NPs/CMC-COF-LZU1) have tremendous potential applications in biotechnology and biological sciences.

Ruthenium Ion-Complexed Carbon Nitride Nanosheets with Peroxidase-like Activity as a Ratiometric Fluorescence Probe for the Detection of Hydrogen Peroxide and Glucose

Detection of hydrogen peroxide is of great significance for clinical diagnosis and biomedical research. Ratiometric detection represents an effective method that is generally based on horseradish peroxidase. In the present study, ruthenium ion-complexed carbon nitride (Ru-C₃N₄) nanosheets are found to serve as a peroxidase mimic and can catalyze the conversion of o-phenylenediamine to fluorescent 2,3-diaminophenazine in the presence of H₂O₂. The produced 2,3-diaminophenazine also results in the apparent quenching of the Ru-C₃N₄ photoluminescence due to the inner filter effect. These unique characteristics can be exploited for the construction of an effective, peroxidase-free ratiometric fluorescence framework for the detection of H₂O₂ and glucose, which has also been used in the successful detection of glucose in human serum. Results from this study not only demonstrate a new peroxidase mimic but also provide a novel ratiometric fluorescence platform for the detection of H₂O₂ and metabolites involving reactions of H₂O₂ generation in the absence of horseradish peroxidase.

Dual-Wavelength Ratiometric Electrochemiluminescence Immunosensor for Cardiac Troponin I Detection

Ratiometric electrochemiluminescence (ECL) has attracted special focus in the biological analysis field, because it could eliminate the environmental interference and allow for precise measurement. Herein, a dual-wavelength ratiometric ECL biosensor was designed for the detection of cardiac troponin I (cTnI), where (4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) (Ru(dcbpy)₃²⁺) and Au nanoparticle-loaded graphene oxide/polyethylenimine (GPRu-Au) nanomaterial acts as an acceptor, and Au nanoparticle-modified graphitic phase carbon nitride nanosheet composite (Au-CNN) acts as donor. Au-CNN shows a high and steady ECL signal centered at 455 nm, which is well-matched with the adsorption of GPRu-Au; thereby, a highly efficient electrochemiluminescent resonance energy transfer (ECL-RET) sensing platform is designed. AuNPs facilitate the immobilization of antibody on the nanomaterials through a Au-N bond. The high surface area of graphene oxide/polyethylenimine allows a large number of Ru(dcbpy)₃²⁺ to be loaded, immensely amplifying the ECL signal. This sensing platform exhibits outstanding analytical performance toward cTnI with a detection limit of 3.94 fg/mL (S/N = 3). The high reliability, selectivity, and sensitivity of this ratiometric ECL biosensor provides a versatile sensing platform for the bioanalysis.