Multi-layer nanoarrays sandwiched by anodized aluminium oxide membranes: an approach to an inexpensive, reproducible, highly sensitive SERS substrate

Rapid fabrication of the Au hexagonal cone arrays for SERS applications

This study performed trace detection using surface-enhanced Raman scattering (SERS) on Au hexagonal cone arrays (Au-HCAs). Uniform porous anodized aluminum oxide (AAO) templates were used, and an Ag film with a cone cavity was prepared using a thermal deposition technique. Next, a series of homogeneous Au-HCAs were prepared controllably via electrodeposition growth technology. The prepared Au-HCAs were used as SERS substrates, and according to the experimental results, the optimal electrodeposition time is 600 s. At this time, Au-HCAs had the highest SERS activity. The detection limit of R6G was 10^-9 M, exhibiting high reproducibility and high uniformity at 10^-6 M, indicating that Au-HCAs had good stability. Moreover, a good linear correlation between the Raman intensity and the molecular concentration endowed Au-HCAs with good quantitative analysis ability. Therefore, the Au-HCAs exhibited great potential for qualitative and quantitative detection.

Reduced graphene oxide on silver nanoparticle layers-decorated titanium dioxide nanotube arrays as SERS-based sensor for glyphosate direct detection in environmental water and soil

When glyphosate, a widely used organophosphate herbicide in agricultural applications, contaminates the environment, it could lead to chronic harm to human health. Herein, an efficient, air-stable and reusable surface-enhanced Raman scattering (SERS) substrate was designed to be an analytical tool for direct determination of glyphosate. A vertical heterostructure of reduced graphene oxide (rGO)-wrapped dual-layers silver nanoparticles (AgNPs) on titania nanotube (TiO2 NTs) arrays was constructed as a SERS substrate. The TiO2 NTs/AgNPs-rGO exhibited high SERS performance for methylene blue detection, offering an analytical enhancement factor (AEF) as large as 7.1 × 108 and the limit of detection (LOD) as low as 10-14 M with repeatability of 4.4 % relative standard deviation (RSD) and reproducibility of 2.0 % RSD. The sensor was stable in ambient and was reusable after photo-degradation. The designed sensor was successfully applied for glyphosate detection with a LOD of 3 µg/L, which is below the maximum contaminant level of glyphosate in environmental water, as recommended by the U.S. EPA and the European Union. A uniqueness of this study is that there is no significant difference between the real-world applications of the SERS sensor on direct glyphosate analysis in environmental samples compared to an analysis using ultra-high performance liquid chromatography.

Annealing Temperature-Dependent Surface-Enhanced Raman spectroscopy on MoS2-Covered silver nanoparticle array

Surface-enhanced Raman spectroscopy (SERS) is an ultra-sensitive analytical tool that can effectively detect and identify molecules by their unique vibrational fingerprints. Development of SERS substrates with good stability, high sensitivity and reproducibility is still a big challenge in practical applications. Recently, 2D materials/metallic hybrid SERS substrates provide a new prospect to improve the SERS performance. Here, we obtain a monolayer MoS₂ covered silver nanoparticle (AgNP) array as a high-performance SERS substrate. Annealing temperature-dependent SERS signals on the hybrid substrate have been explored. The optimum SERS performance was obtained at 290 ℃ (the detection limit of 10^-13 M for Rhodamine 6G and the corresponding SERS enhancement factor of 8.3 × 10⁹), which is attributed to the better contact between AgNPs and MoS₂ and the uniform AgNPs with appropriate particle sizes. The prepared MoS₂/AgNPs hybrid substrates also have been utilized to detect various molecules, which demonstrates a great potential for applications in food safety and biochemical environmental detection.

Direct MYD88L265P gene detection for diffuse large B-cell lymphoma (DLBCL) via a miniaturised CRISPR/dCas9-based sensing chip

Traditional methods for single-nucleotide variants based on amplification and fluorescence signals require expensive reagents and cumbersome instruments, and they are time-consuming for each trial. Here, a porous anodised aluminium (PAA)-based sensing chip modified with deactivated Cas9 (dCas9) proteins and synthetic guide RNA (sgRNA) as the biorecognition receptor is developed, which can be used for the label-free sensing of the diffuse large B-cell lymphoma (DLBCL) MYD88^L265P gene by integrating with electrochemical ionic current rectification (ICR) measurement. The sgRNA that can specifically identify and capture the MYD88^L265P gene was screened, which has been proved to be workable to activate dCas9 for the target MYD88^L265P. In the sensing process, the dCas9 proteins can capture the genome sequence, thus bringing negative charges over the PAA chip and correspondingly resulting in a variation in the ICR value due to the uneven transport of potassium anions through the ion channels of the PAA chip. The whole sensing can be finished within 40 min, and there is no need for gene amplification. The CRISPR/dCas9-based sensor demonstrates ultrasensitive detection performance in the concentration range of 50 to 200 ng μL^-1 and it has been proved to be feasible for the genome sequence of patient tissues. This sensor shows the potential of targeting other mutations by designing the corresponding sgRNAs and expands the applications of CRISPR/dCas9 technology to the on-chip electrical detection of nucleic acids, which will be very valuable for rapid diagnosis of clinically mutated genes. This makes the hybrid CRISPR-PAA chip an ideal candidate for next-generation nucleic acid biosensors.

The current state of the art of plasmonic nanofibrous mats as SERS substrates: design, fabrication and sensor applications

Surface-enhanced Raman scattering (SERS) is a widely used analytical tool that allows molecular fingerprint-based ultra-sensitive detection through an enhanced electromagnetic field generated by plasmonic metal nanoparticles (MNPs) by virtue of their localized surface plasmon resonance (LSPR). Although significant progress has been made in the design and fabrication of a variety of SERS substrates, MNP-decorated electrospun nanofibrous (NF) mats have attracted much attention due to their unique nanoscale structural and functional properties. This review focuses on the current state of the art in the fabrication of plasmonic NF mats with the main focus on the pre-mix, in situ, and ex situ approaches. The characteristic functional advantages and limitations of these strategies are also highlighted, which might be helpful for the research community when adopting a suitable approach. The potential of these plasmonic NF mats as a SERS-active optical sensor substrate, and their performance parameters such as the limit of detection, analytical range, and enhancement factor, and real-world applications are also discussed. The summary and futuristic discussion in this review might be of significant value in developing plasmonic NF mat-based SERS-active point-of-care diagnostic chips for a wide range of applications.

A mixed valence state Mo-based metal–organic framework from photoactivation as a surface-enhanced Raman scattering substrate

In this work, a facile method for a mixed valence state Mo-base metal-organic framework from photo activation (UV Mo-MOF) was proposed and employed as a SERS substrates with molecule enrichment property.

Arrayed nanopore silver thin films for surface-enhanced Raman scattering

Active substrates are crucial for surface-enhanced Raman scattering (SERS). Among these substrates, large uniform area arrayed nanoporous silver thin films have been developed as active substrates. Arrayed nanoporous silver thin films with unique anisotropic morphologies and nanoporous structures can be fabricated onto the nanoporous anodic aluminum oxide (AAO) of controlled pore size and interspacing by precisely tuning the sputtering parameters. These thin films preserve locally enhanced electromagnetic fields by exciting the surface plasmon resonance, which is beneficial for SERS. In this study, nanoporous silver thin films were transferred into polymethylmethacrylate (PMMA) and polydimethylsiloxane (PDMS) substrates using our recently invented template-assisted sol-gel phase inverse-imprinting process to form two different nanopore thin films. The as-formed Ag nanoporous thin films on PMMA and PDMS exhibited intensively enhanced SERS signals using Rhodamine 6G (R6G) as the model molecule. The two nanopore thin films exhibited opposite pore size-dependent SERS tendencies, which were elucidated by the different enhancement tendencies of the electric field around pores of different diameters. In particular, the Ag nanoporous thin film on PMMA exhibited an R6G detection limit of as low as 10-6 mol L-1, and the SERS enhancement factor (EF) was more than 106. The low detection limit and large EF demonstrated the high sensitivity of the as-prepared SERS substrates for label-free detection of biomolecules. Compared with conventional smooth films, this nanopore structure can facilitate future application in biomolecular sensors, which allows the detection of single molecules via an electronic readout without requirement for amplification or labels.

Functional nanoarrays for investigating stem cell fate and function

Stem cells show excellent potential in the field of tissue engineering and regenerative medicine based on their excellent capability to not only self-renew but also differentiate into a specialized cell type of interest. However, the lack of a non-destructive monitoring system makes it challenging to identify and characterize differentiated cells before their transplantation without compromising cell viability. Thus, the development of a non-destructive monitoring method for analyzing cell function is highly desired and can significantly benefit stem cell-based therapies. Recently, nanomaterial-based scaffolds (e.g., nanoarrays) have made possible considerable advances in controlling the differentiation of stem cells and characterization of the differentiation status sensitively in real time. This review provides a selective overview of the recent progress in the synthesis methods of nanoarrays and their applications in controlling stem cell fate and monitoring live cell functions electrochemically. We believe that the topics discussed in this review can provide brief and concise guidelines for the development of novel nanoarrays and promote the interest in live cell study applications. A method which can not only control but also monitor stem cell fate and function will be a promising technology that can accelerate stem cell therapies.

Indirect surface-enhanced Raman scattering assay of insulin-like growth factor 2 receptor protein by combining the aptamer modified gold substrate and silver nanoprobes

An indirect aptamer-based SERS assay for insulin-like growth factor 2 receptor (IGF-IIR) protein was developed. The gold substrate and silver nanoparticles (AgNPs) were employed simultaneously to achieve double enhancement for SERS signals. Firstly, the five commercial SERS substrates including Enspectr, Ocean-Au, Ocean-AG, Ocean-SP and Q-SERS substrates were evaluated using 4-mercaptobenzoic acid (4-MBA). The Q-SERS substrate was selected based on low relative standard deviation (RSD, 8.6%) and high enhancement factor (EF, 8.7*10⁵), using a 785 nm laser. The aptamer for IGF-IIR protein was designed to include two sequences: one grafted on gold substrate to specifically capture the IGF-IIR protein and a second one forming a 3' sticky bridge to capture SERS nanotags. The SERS nanotag was composed by AgNPs (20 nm), 4-MBA and DNA probes that can hybridize with the aptamer. Due to the steric-hindrance effect, when the aptamer doesn't combine with IGF-IIR protein, it only can capture the SERS nanotags. Therefore, there was a negative correlation between the concentration of IGF-IIR protein and the intensity of 4-MBA at 1076 cm^-1. The detection limit reached to 141.2 fM and linear range was from 10 pM to 1 μM. The SERS aptasensor also exhibits a high reproducibility with an average RSD of 4.5%. The interference test was conducted with other four proteins to verify the accuracy of measuring. The study provides an approach to quantitative determination of proteins based on specific recognition and nucleic acid hybridization of aptamers, to establish sandwich structure for SERS enhancement. Graphical abstractSchematic representation of surface-enhanced Raman scattering (SERS) assay on insulin-like growth factor 2 receptor (IGF-IIR) protein by combining the aptamer modified gold substrate and 4-mercaptobenzoic acid (4-MBA) and DNA probe modified silver nanoparticles.