Triple hierarchy and double synergies of NiFe/Co9S8/carbon cloth: a new and efficient electrocatalyst for the oxygen evolution reaction

Porous Ni3S2-Co9S8 Carbon Aerogels Derived from Carrageenan/NiCo-MOF Hydrogels as an Efficient Electrocatalyst for Oxygen Evolution in Rechargeable Zn-Air Batteries

Herein, we fabricate N-doped porous Ni₃S₂-Co₉S₈/carbon aerogels (Ni₃S₂-Co₉S₈/NCAs) using carrageenan/NiCo-metal-organic framework (MOF) hydrogels as the precursor via the high-temperature carbonization route with excellent electrocatalytic properties for the oxygen evolution reaction (OER). The electrochemical measurements indicate that the Ni₃S₂-Co₉S₈/NCA as a quintessential electrocatalyst exhibits excellent OER performance, which has outperformed most transition metal sulfide (TMS) catalysts in alkaline environments, as attested with a lower overpotential of 337 mV at 10 mA cm^-2 and a smaller Tafel slope of 77 mV dec^-1. Meanwhile, a Zn-air battery based on Ni₃S₂-Co₉S₈/NCA + Pt/C achieves a large power density of up to 256 mW cm^-2 (and 193 mW cm^-2), small charge/discharge voltage gap, and good cycling stability, notably better than the conventional RuO₂ + Pt/C-based Zn-air batteries. These excellent electrocatalytic properties are mainly attributed to the distinct hierarchical porous structure and interfacial synergy between the Ni₃S₂ and Co₉S₈ nanoparticle structure with rich defects, facilitating the mass transport and high graphitization degree beneficial for electron mobility. It is envisioned that the research provides a novel approach for the exploration of marine biomass as an electrocatalyst.

Recent Advancements in Chalcogenides for Electrochemical Energy Storage Applications

Energy storage has become increasingly important as a study area in recent decades. A growing number of academics are focusing their attention on developing and researching innovative materials for use in energy storage systems to promote sustainable development goals. This is due to the finite supply of traditional energy sources, such as oil, coal, and natural gas, and escalating regional tensions. Because of these issues, sustainable renewable energy sources have been touted as an alternative to nonrenewable fuels. Deployment of renewable energy sources requires efficient and reliable energy storage devices due to their intermittent nature. High-performance electrochemical energy storage technologies with high power and energy densities are heralded to be the next-generation storage devices. Transition metal chalcogenides (TMCs) have sparked interest among electrode materials because of their intriguing electrochemical properties. Researchers have revealed a variety of modifications to improve their electrochemical performance in energy storage. However, a stronger link between the type of change and the resulting electrochemical performance is still desired. This review examines the synthesis of chalcogenides for electrochemical energy storage devices, their limitations, and the importance of the modification method, followed by a detailed discussion of several modification procedures and how they have helped to improve their electrochemical performance. We also discussed chalcogenides and their composites in batteries and supercapacitors applications. Furthermore, this review discusses the subject’s current challenges as well as potential future opportunities.

Enhanced electrocatalytic activity of FeNi alloy quantum dot-decorated cobalt carbonate hydroxide nanosword arrays for effective overall water splitting

The development of earth-abundant catalysts toward high-efficiency overall water splitting is of critical importance for electrochemical hydrogen production. Here, novel FeNi alloy quantum dot (QD)-decorated cobalt carbonate hydroxide (CoCH) nanosword arrays were successfully constructed on Ni foam (FeNi/CoCH/Ni foam) and used as an efficient bifunctional electrocatalyst for overall water splitting in alkaline media. Benefiting from the synergistic effect between the FeNi alloy QDs and CoCH, the FeNi/CoCH/Ni foam electrode delivers a current density of 20 mA cm^-2 at an overpotential of 240 mV and a small Tafel slope of 44.8 mV dec^-1 for the oxygen evolution reaction (OER). Further, it displays excellent performance for overall water splitting with a voltage of 1.49 V at 10 mA cm^-2 and maintains its activity for at least 23 h. In particular, it only needs low cell voltages of 1.54 and 1.6 V to drive high current densities of 100 and 400 mA cm^-2, respectively, which is much better than commercial Pt/C/Ni foam‖RuO₂/Ni foam, providing great potential for large-scale application.

Strong coordination ability of sulfur with cobalt for facilitating scale-up synthesis of Co9S8 encapsulated S, N co-doped carbon as a trifunctional electrocatalyst for oxygen reduction reaction, oxygen and hydrogen evolution reaction

High activity trifunctional non-noble electrocatalysts, targeting oxygen reduction reaction (ORR), hydrogen evolution reaction (HER), and oxygen evolution reaction (OER), are rationally designed by integrating the merits of both Co₉S₈ nanoparticles and carbons nanosheets. Herein, Co₉S₈ loaded with S, N co-doped carbon core-shell catalyst (Co₉S₈@SNC) was reasonably designed and synthesized by using the strong coordination effect between Co²⁺ and CS at the molecular level. The significant synergistic effect between the S, N co-doped carbon shell and Co₉S₈ core endows the catalyst with excellent catalytic performance for ORR, HER, and OER reactions. The carbon shell enhances the conductivity of the hybrid material, while the Co₉S₈ core provides the main catalytic active sites. More specifically, the half-wave potential for ORR is 0.846 mV, and the overpotential at 10 mA cm^-2 for OER and HER are 320 mV and 170 mV, respectively. To test its practical application, zinc-air battery assembled by Co₉S₈@SNC shows a high power density of 239 mW cm^-2, excellent rechargeability, and long cyclic stability. This work provides a promising and extensible method to in-situ synthesize core-shell metal sulfides loaded S, N co-doped carbon composites, which can be a promising candidate for electrocatalytic material in energy storage and conversion devices.

Principles of Water Electrolysis and Recent Progress in Cobalt-, Nickel-, and Iron-Based Oxides for the Oxygen Evolution Reaction

Water electrolysis that results in green hydrogen is the key process towards a circular economy. The supply of sustainable electricity and availability of oxygen evolution reaction (OER) electrocatalysts are the main bottlenecks of the process for large-scale production of green hydrogen. A broad range of OER electrocatalysts have been explored to decrease the overpotential and boost the kinetics of this sluggish half-reaction. Co-, Ni-, and Fe-based catalysts have been considered to be potential candidates to replace noble metals due to their tunable 3d electron configuration and spin state, versatility in terms of crystal and electronic structures, as well as abundance in nature. This Review provides some basic principles of water electrolysis, key aspects of OER, and significant criteria for the development of the catalysts. It provides also some insights on recent advances of Co-, Ni-, and Fe-based oxides and a brief perspective on green hydrogen production and the challenges of water electrolysis.

Enhancing Hydrogen Evolution by Optimizing the Hydrogen Adsorption on Titanium Monoxide Nanodot-Decorated Cobalt Sulfide Nanosheets

Modulating the local electronic state of metal compounds through interfacial interaction has become a key method for manufacturing high-performance hydrogen evolution reaction (HER) electrocatalysts. The electron-rich active sites can promote the adsorption of hydrogen, which accelerates the Volmer step and thereby enhances the electrocatalytic performance of HER. Here, we found that the strong interfacial interaction between TiO nanodots (TiO/Co-S) and Co-S nanosheets could advantageously improve the performance toward HER of electrocatalyst. Meanwhile, XPS results showed that modulating the local electronic structure of the TiO nanodots produces electron-rich regions on Co. As a result, the overpotential of the TiO/Co-S nanocomposite at 10 mA cm^-2 was 107 mV, and the Tafel slope was 83.3 mV dec^-1 . This study focused on the effect of the solid-solid interface on the local electronic structure of the catalytic metal active sites and successfully improved the catalytic activity of transition metal materials in HER catalysis.

In Situ Grown CoMn2 O4 3D-Tetragons on Carbon Cloth: Flexible Electrodes for Efficient Rechargeable Zinc-Air Battery Powered Water Splitting Systems

The integration of energy conversion and storage systems such as electrochemical water splitting (EWS) and rechargeable zinc-air battery (ZAB) is on the vision to provide a sustainable future with green energy resources. Herein, a unique strategy for decorating 3D tetragonal CoMn₂ O₄ on carbon cloth (CMO-U@CC) via a facile one-pot in situ hydrothermal process, is reported. The highly exposed morphology of 3D tetragons enhances the electrocatalytic activity of CMO-U@CC. This is the first demonstration of such a bifunctional activity of CMO-U@CC in an EWS system; it achieves a nominal cell voltage of 1.610 V @ 10 mA cm^-2 . Similarly, the fabricated rechargeable ZAB delivers a specific capacity of 641.6 mAh g_zn ^-1 , a power density of 135 mW cm^-2 , and excellent cyclic stability (50 h @ 10 mA cm^-2 ). Additionally, a series of flexible solid-state ZABs are fabricated and employed to power the assembled CMO-U@CC-based water electrolyzer. To the best of the authors' knowledge, this is the first demonstration of an in situ-grown binder-free CMO-U@CC as a flexible multifunctional electrocatalyst for a built-in integrated rechargeable ZAB-powered EWS system.

Electronic engineering of CoSe/FeSe2 hollow nanospheres for efficient water oxidation

First-row non-precious metal-based catalysts are widely studied and recognized as potential substitutes for precious metal-based catalysts in the oxygen evolution reaction (OER) for hydrogen generation but their application remains challenging. In this study, a unique class of Co-Fe selenide hollow nanospheres (CoSe@FeSe2) is well-designed through a facile hydrothermal method. The in situ formed hybrid composites possess numerous interfaces allowing partial electron transfer via O2- bridges to optimize the adsorption feature of the reaction intermediates, *OH, *O, and *OOH, on the catalysts. The collected surface valence band spectra evidence the optimization of the intermediate adsorption and active sites. The as-synthesized CoSe@FeSe2 exhibits excellent OER activity with a low overpotential of 281 mV to drive a current density of 10 mA cm-2 and a low Tafel slope of 34.3 mV dec-1 in an alkaline electrolyte. Additionally, the advanced catalyst also shows super stability with negligible current density decay after 12 h. This work presents a prototype for the fabrication of highly efficient electrocatalysts using an electronic engineering strategy.

Interfacial synergy between dispersed Ru sub-nanoclusters and porous NiFe layered double hydroxide on accelerated overall water splitting by intermediate modulation

Construction of an efficient bifunctional electrocatalyst through a rational interface-engineering strategy to optimize the adsorption energy of H* and OH* species at the atomic/molecular level is of great importance for water splitting. Although conventional NiFe layered double hydroxide (LDH) shows excellent performance for alkaline oxygen evolution reactions (OERs), it shows extremely poor activity toward hydrogen evolution reactions (HERs) due to weak hydrogen adsorption and sluggish kinetics. In this work, integration of sub-nanoscale Ru species with NiFe LDH can dramatically enhance the adsorption energy of H* and improve their HER kinetics. Besides, benefitting from the desired potential-induced strategy, the Ru-NiFe LDH interfaces will convert to RuO2-NiFe(OOH)x interfaces to optimize the adsorption energy of OH* to meet the requirement of strengthening the OER performance. Strikingly, the Ru-NiFe LDH-F/NF sample (NF: Ni foam) shows an excellent OER and HER performance with an overpotential of 230.0 mV and 115.6 mV at a current density of 10 mA cm-2, respectively, as well as outstanding durability. The overall water splitting device was fabricated by using Ru/NiFe LDH-F/NF as both the HER and OER electrode with a potential of 1.53 V to achieve a current density of 10 mA cm-2. In addition, the theoretical calculations demonstrated that the Ru-NiFe LDH interfaces could optimize the adsorption energy of H* and OH*. This study provides a new insight into the development of highly efficient bifunctional electrocatalysts for water electrolysis.

Flexible 3D carbon cloth as a high-performing electrode for energy storage and conversion

High-performance energy storage and conversion devices with high energy density, power density and long-term cycling life are of great importance in current consumer electronics, portable electronics and electric vehicles. Carbon materials have been widely investigated and utilized in various energy storage and conversion devices due to their excellent conductivity, mechanical and chemical stability, and low cost. Abundant excellent reviews have summarized the most recent progress and future outlooks for most of the current prime carbon materials used in energy storage and conversion devices, such as carbon nanotubes, fullerene, graphene, porous carbon and carbon fibers. However, the significance of three-dimensional (3D) commercial carbon cloth (CC), one of the key carbon materials with outstanding mechanical stability, high conductivity and flexibility, in the energy storage and conversion field, especially in wearable electronics and flexible devices, has not been systematically summarized yet. In this review article, we present a careful investigation of flexible CC in the energy storage and conversion field. We first give a general introduction to the common properties of CC and the roles it has played in energy storage and conversion systems. Then, we meticulously investigate the crucial role of CC in typical electrochemical energy storage systems, including lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries and supercapacitors. Following a description of the wide application potential of CC in electrocatalytic hydrogen evolution, oxygen evolution/reduction, full-water splitting, etc., we will give a brief introduction to the application of CC in the areas of photocatalytically and photoelectrochemically induced solar energy conversion and storage. The review will end with a brief summary of the typical superiorities that CC has in current energy conversion and storage systems, as well as providing some perspectives and outlooks on its future applications in the field. Our main interest will be focused on CC-based flexible devices due to the inherent superiority of CC and the increasing demand for flexible and wearable electronics.

Mo-Doped Zn, Co Zeolitic Imidazolate Framework-Derived Co9S8 Quantum Dots and MoS2 Embedded in Three-Dimensional Nitrogen-Doped Carbon Nanoflake Arrays as an Efficient Trifunctional Electrocatalysts for the Oxygen Reduction Reaction, Oxygen Evolution Reaction, and Hydrogen Evolution Reaction

Herein, we first propose a facile strategy to synthesize Co₉S₈ and MoS₂ nanocrystals embedded in porous carbon nanoflake arrays supported on carbon nanofibers (Co₉S₈-MoS₂/N-CNAs@CNFs) by the pyrolysis of Mo-doped Zn, Co zeolitic imidazolate framework grown on carbon nanofibers and subsequent sulfuration. The electrocatalyst shows high and stable electrocatalytic performance, with a half-wave potential of 0.82 V for oxygen reduction reaction and an overpotential at 10 mA cm^-2 for oxygen evolution reaction (0.34 V) and hydrogen evolution reaction (0.163 V), which outperform the metal-organic framework-derived transition metal sulfide catalysts reported so far. Furthermore, the Co₉S₈-MoS₂@N-CNAs@CNFs are employed as an air cathode in a liquid-state and all-solid-state zinc-air battery, presenting high power densities of 222 and 96 mW cm^-2, respectively. Such excellent catalytic activities are mainly owing to the unique three-dimensional structure and chemical compositions, optimal electronic conductivity, adequate surface area, and the abundance of active sites. Thus, this work provides an important method for designing other metal-organic framework-derived three-dimensional structural sulfide quantum dot multifunctional electrocatalysts for wider application in highly efficient catalysis and energy storage.

Advanced on-site glucose sensing platform based on a new architecture of free-standing hollow Cu(OH)2 nanotubes decorated with CoNi-LDH nanosheets on graphite screen-printed electrode

The planned design of nanocomposites combined with manageable production processes, which can offer controllability over the nanomaterial structure, promises the practical applications of functional nanomaterials. Hollow core-shell nanostructure architectures represent an emerging category of advanced functional nanomaterials, whose benefits derived from their notable properties may be hampered by complicated construction processes, especially in the sensing domain. In this regard, we designed a highly porous three-dimensional array of hierarchical hetero Cu(OH)₂@CoNi-LDH core-shell nanotubes via a quick, very simple, green, and highly controllable three-step in situ method; they were directly grown on a glassy carbon electrode to fabricate an enzyme-free glucose sensor. By virtue of an open structure containing a hollow conductive core and a highly porous catalytic active shell, which were both synthesized by the in situ method, hierarchical self-standing core-shell nanotubes were obtained. They provided an enlarged active surface area, highly accessible catalytic sites, faster electron transfer, effortless electrolyte ion diffusion pathways, and structural stability, thus leading to improved electrocatalytic performances and durability towards glucose electro-oxidation; this was reflected by the fast sensitive responses of the as-prepared sensor towards glucose and comparable results with the automatic biochemistry analyzer used in hospitals in real sample analysis. Moreover, the commercialization capability of the proposed sensor was evaluated analogously by directly grown hierarchical Cu(OH)₂@CoNi-LDH core-shell nanotubes on graphite screen-printed exposable electrodes through a 3-step in situ method. Cu(OH)₂@CoNi-LDH NS-NTs/GSPE showed accurate responses towards glucose, lack of any fouling effect of the electrocatalyst layer over a wide range of glucose concentrations and comparable results with that of a commercial glucometer in real sample analysis, which revealed high sensitivity, selectivity, and durability of the low-cost on-site sensor as well as excellent versatility of its fabrication method. Thus, the self-supporting, cost-affordable, facile, and fast electrode fabrication procedure with versatility and meticulous structural controllability presented in this research provides a new architecture for the advancement of high-performance electrochemical sensors and miniaturized detection devices.