The atomic origin of nickel-doping-induced catalytic enhancement in MoS2 for electrochemical hydrogen production

Optimizing Surface State Electrons of Topological Semi-Metal by Atomic Doping for Enhanced Hydrogen Evolution Reaction

Topological materials carrying topological surface states (TSSs) have extraordinary carrier mobility and robustness, which provide a new platform for searching for efficient hydrogen evolution reaction (HER) electrocatalysts. However, the majority of these TSSs originate from the sp band of topological quantum catalysts rather than the d band. Here, based on the density functional theory calculation, it is reported a topological semimetal Pd3Sn carrying TSSs mainly derived from d orbital and proposed that optimizing surface state electrons of Pd3Sn by introduction heteroatoms (Ni) can promote hybridization between hydrogen atoms and electrons, thereby reducing the Gibbs free energy (ΔGH) of adsorbed hydrogen and improving its HER performance. Moreover, this is well verified by electrocatalytic experiment results, the Ni-doped Pd3Sn (Ni0.1Pd2.9Sn) show much lower overpotential (-29 mV vs RHE) and Tafel slope (17 mV dec-1) than Pd3Sn (-39 mV vs RHE, 25 mV dec-1) at a current density of 10 mA cm-2. Significantly, the Ni0.1Pd2.9Sn nanoparticles exhibit excellent stability for HER. The electrocatalytic activity of Ni0.1Pd2.9Sn nanoparticles is superior to that of commercial Pt. This work provides an accurate guide for manipulating surface state electrons to improve the HER performance of catalysts.

Rhodamine 6G/Transition Metal Dichalcogenide Hybrid Nanoscrolls for Enhanced Optoelectronic Performance

The low light absorption efficiency has seriously hindered the application of two-dimensional transition metal dichalcogenide (TMDC) nanosheets in the field of optoelectronic devices. Various approaches have been used to improve the performance of TMDC nanosheets. Preparation of one-dimensional TMDC nanoscrolls in combination with photoactive materials has been a promising method to improve their properties recently. In this work, we report a facile method to enhance the optoelectronic performance of TMDC nanoscrolls by wrapping the photoactive organic dye rhodamine (R6G) into them. After R6G molecules were deposited on monolayer TMDC nanosheets by the solution method, the R6G/MoS2 nanoscrolls with lengths up to hundreds of microns were prepared in a short time by dropping a mixture of ammonia and ethanol solution on the R6G/MoS2 nanosheets. The as-obtained R6G/MoS2 nanoscrolls were well characterized by optical microscopy, atomic force microscopy, Raman spectroscopy, and transmission electron microscopy to prove the encapsulation of R6G. There are multiple type II heterojunction interfaces in the R6G/MoS2 nanoscrolls, which can promote the generation of photo-induced carriers and the following electron-hole separation. The separated electrons were transported rapidly along the axial direction of the R6G/MoS2 nanoscrolls, which greatly improves the efficiency of light absorption and photoresponse. Under the irradiation of an incident 405 nm laser, the photoresponsivity, carrier mobility, external quantum efficiency, and detectivity of R6G/MoS2 nanoscrolls were enhanced to 66.07 A/W, 132.93 cm2V-1s-1, 20,261%, and 1.25 × 1012 cm·Hz1/2W-1, which are four orders of magnitude higher than those of monolayer MoS2 nanosheets. Our work indicates that the R6G/TMDC hybrid nanoscrolls could be promising materials for high-performance optoelectronic devices.

Epitaxial Growth of Two-Dimensional Nonlayered AuCrS2 Materials via Au-Assisted Chemical Vapor Deposition

Two-dimensional (2D) nonlayered transition metal dichalcogenide (TMD) materials are emergent platforms for various applications from catalysis to quantum devices. However, their limited availability and nonstraightforward synthesis methods hinder our understanding of these materials. Here, we present a novel technique for synthesizing 2D nonlayered AuCrS2 via Au-assisted chemical vapor deposition (CVD). Our detailed structural analysis reveals the layer-by-layer growth of [AuCrS2] units atop an initial CrS2 monolayer, with Au binding to the adjacent monolayer of CrS2, which is in stark contrast with the well-known metal intercalation mechanism in the synthesis of many other 2D nonlayered materials. Theoretical calculations further back the crucial role of Cr in increasing the mobility of Au species and strengthening the adsorption energy of Au on CrS2, thereby aiding the growth throughout the CVD process. Additionally, the resulting free-standing nanoporous AuCrS2 (NP-AuCrS2) exhibits exceptional electrocatalytic properties for the hydrogen evolution reaction.

Humidity activated ultra-selective room temperature gas sensor based on W doped MoS2/RGO composites for trace level ammonia detection

The lack of highly efficient, cost effective and stable ammonia gas sensors functionable at room temperature even in extreme humid environments poses significant challenge for the future generation gas sensors. The prime factors that impede the development of such next generation gas sensors are the strong interference of humidity and sluggish selectivity. Herein, we fabricated tungsten doped molybdenum disulphide/reduced graphene oxide composite by an in-situ hydrothermal method to exploit the adsorption, dissolution (solubility), ionization and transmission process of ammonia and thereby to effectuate its trace level detection even in indispensable humid environments. The protype based on 5 at.% Tungsten doped MoS2/RGO (W5) gas sensor exhibited 3.8-fold increment in its response to 50 ppm of ammonia when the relative humidity varied from 20 % to 70 % with ultra-high selectivity at room temperature. The as prepared gas sensor revealed a practical detection limit down to 1 ppm with a substantial response and rapid recovery time. Furthermore, W5 gas sensor exhibited a 42-fold increment in response to 50 ppm of ammonia relative to its pristine (MoS2/RGO) MG composite with a RH of 70 %. The proton hopping mechanism accountable for such an enormous enhancement in ammonia sensing and its potential for breath sensor are briefly annotated.

Panoply of Ni-Doping-Induced Reconstructions, Electronic Phases, and Ferroelectricity in 1T-MoS2

The distorted phases of monolayer 1T-MoS2 have distinct electronic properties, with potential applications in optoelectronics, catalysis, and batteries. We theoretically investigate the use of Ni-doping to generate distorted 1T phases and find not only the ones usually reported but also two further phases (3 × 3 and 4 × 4), depending on the concentration and the substitutional or adatom doping site. Corresponding pristine phases are stable after removal of dopants, which might offer a potential route to experimental synthesis. We find large ferroelectric polarizations, most notably in 3 × 3 which─compared to the recently measured 1T″─has 100 times greater ferroelectric polarization, a lower energy, and a larger band gap. Doped phases include exotic multiferroic semimetals, ferromagnetic polar metals, and improper ferroelectrics with only in-plane polarization switchable. The pristine phases have unusual multiple gaps in the conduction bands with possible applications for intermediate band solar cells, transparent conductors, and nonlinear optics.

Exploring the Roles of Single Atom in Hydrogen Peroxide Photosynthesis

This comprehensive review provides a deep exploration of the unique roles of single atom catalysts (SACs) in photocatalytic hydrogen peroxide (H2O2) production. SACs offer multiple benefits over traditional catalysts such as improved efficiency, selectivity, and flexibility due to their distinct electronic structure and unique properties. The review discusses the critical elements in the design of SACs, including the choice of metal atom, host material, and coordination environment, and how these elements impact the catalytic activity. The role of single atoms in photocatalytic H2O2 production is also analysed, focusing on enhancing light absorption and charge generation, improving the migration and separation of charge carriers, and lowering the energy barrier of adsorption and activation of reactants. Despite these advantages, several challenges, including H2O2 decomposition, stability of SACs, unclear mechanism, and low selectivity, need to be overcome. Looking towards the future, the review suggests promising research directions such as direct utilization of H2O2, high-throughput synthesis and screening, the creation of dual active sites, and employing density functional theory for investigating the mechanisms of SACs in H2O2 photosynthesis. This review provides valuable insights into the potential of single atom catalysts for advancing the field of photocatalytic H2O2 production.

Single-Atom and Dual-Atom Electrocatalysts: Synthesis and Applications

Distinguishing themselves from nanostructured catalysts, single-atom catalysts (SACs) typically consist of positively charged single metal and coordination atoms without any metal-metal bonds. Dual-atom catalysts (DACs) have emerged as extended family members of SACs in recent years. Both SACs and DACs possess characteristics that combine both homogeneous and heterogeneous catalysis, offering advantages such as uniform active sites and adjustable interactions with ligands, while also inheriting the high stability and recyclability associated with heterogeneous catalyst systems. They offer numerous advantages and are extensively utilized in the field of electrocatalysis, so they have emerged as one of the most prominent material research platforms in the direction of electrocatalysis. This review provides a comprehensive review of SACs and DACs in the field of electrocatalysis: encompassing economic production, elucidating electrocatalytic reaction pathways and associated mechanisms, uncovering structure-performance relationships, and addressing major challenges and opportunities within this domain. Our objective is to present novel ideas for developing advanced synthesis strategies, precisely controlling the microstructure of catalytic active sites, establishing accurate structure-activity relationships, unraveling potential mechanisms underlying electrocatalytic reactions, identifying more efficient reaction paths, and enhancing overall performance in electrocatalytic reactions.

Photoelectrocatalysis Synthesis of Ammonia Based on a Ni-Doped MoS2/Si Nanowires Photocathode and Porous Water with High N2 Solubility

The synthesis of ammonia through photocatalysis or photoelectrochemistry (PEC) and nitrogen reduction reaction (NRR) has become one of the recent research hotspots in the field, where the catalyzed materials and strategies are critical for the NRR. Herein, a Ni-doped MoS₂/Si nanowires (Ni-MoS₂/Si NWs) photocathode is prepared, where the Si NWs are formed on the surface of a Si slice by the metal-assisted chemical etching method, and the hydrothermally synthesized Ni-MoS₂ nanosheets are then cast-coated on the Si NWs electrode. Porous water with high solubility of N₂ is prepared by treating a hydrophobic porous coordination polymer with hydrophilic bovine serum albumin for subsequent aqueous dispersing. The relevant electrodes and materials are characterized by electrochemistry, UV-vis spectrophotometry, scanning electron microscopy/energy dispersive spectroscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller method, and zeta potential method. The uses of the Ni-MoS₂/Si NWs photocathode and the porous water with high nitrogen solubility for PEC-NRR give a yield of NH₃ of 12.0 mmol h^-1 m^-2 under optimal conditions (e.g., at 0.25 V vs RHE), and the obtained apparent Faradaic efficiency higher than 100% is discussed from the inherent photocurrent-free photocatalysis effect of the photoelectrodes and the suggested classification of three kinds of electrons in PEC, which may have some reference value in understanding and improving other PEC-based processes.

Recent progress of two-dimensional heterostructures for thermoelectric applications

The rapid development of synthesis and fabrication techniques has opened up a research upsurge in two-dimensional (2D) material heterostructures, which have received extensive attention due to their superior physical and chemical properties. Currently, thermoelectric energy conversion is an effective means to deal with the energy crisis and increasingly serious environmental pollution. Therefore, an in-depth understanding of thermoelectric transport properties in 2D heterostructures is crucial for the development of micro-nano energy devices. In this review, the recent progress of 2D heterostructures for thermoelectric applications is summarized in detail. Firstly, we systematically introduce diverse theoretical simulations and experimental measurements of the thermoelectric properties of 2D heterostructures. Then, the thermoelectric applications and performance regulation of several common 2D materials, as well as in-plane heterostructures and van der Waals heterostructures, are also discussed. Finally, the challenges of improving the thermoelectric performance of 2D heterostructures materials are summarized, and related prospects are described.

The Effect of the 3D Nanoarchitecture and Ni-Promotion on the Hydrogen Evolution Reaction in MoS2 /Reduced GO Aerogel Hybrid Microspheres Produced by a Simple One-Pot Electrospraying Procedure

The transition toward renewable energy sources requires low-cost, efficient, and durable electrocatalysts for green H₂ production. Herein, an easy and highly scalable method to prepare MoS₂ nanoparticles embedded in 3D partially reduced (pr) graphene oxide (GO) aerogel microspheres (MoS₂ /prGOAMs) with controlled morphology and composition is described. Given their peculiar center-diverging mesoporous structure, which allows easy access to the active sites and optimal mass transport, and their efficient electron transfer facilitated by the intimate contact between the MoS₂ and the 3D connected highly conductive pr-GO sheets, these materials exhibit a remarkable electrocatalytic activity in the hydrogen evolution reaction (HER). Ni atoms, either as single Ni atoms or NiO aggregates are then introduced in the MoS₂ /prGOAMs hybrids, to facilitate water dissociation, which is the slowest step in alkaline HER, producing a bifunctional catalyst. After optimization, Ni-promoted MoS₂ /prGOAMs obtained at 500 °C reach a remarkable η₁₀ (overpotential at 10 mA cm^-2 ) of 160 mV in 1 m KOH and 174 mV in 0.5 m H₂ SO₄ . Moreover, after chronopotentiometry tests (15 h) at a current density of 10 mA cm^-2 , the η₁₀ value improves to 147 mV in alkaline conditions, indicating an exceptional stability.

Single-Atom Catalysts: A Review of Synthesis Strategies and Their Potential for Biofuel Production

Biofuels have been derived from various feedstocks by using thermochemical or biochemical procedures. In order to synthesise liquid and gas biofuel efficiently, single-atom catalysts (SACs) and single-atom alloys (SAAs) have been used in the reaction to promote it. SACs are made up of single metal atoms that are anchored or confined to a suitable support to keep them stable, while SAAs are materials generated by bi- and multi-metallic complexes, where one of these metals is atomically distributed in such a material. The structure of SACs and SAAs influences their catalytic performance. The challenge to practically using SACs in biofuel production is to design SACs and SAAs that are stable and able to operate efficiently during reaction. Hence, the present study reviews the system and configuration of SACs and SAAs, stabilisation strategies such as mutual metal support interaction and geometric coordination, and the synthesis strategies. This paper aims to provide useful and informative knowledge about the current synthesis strategies of SACs and SAAs for future development in the field of biofuel production.

Dopants and grain boundary effects in monolayer MoS2: a first-principles study

The structural, electronic and magnetic properties of large area chemical vapor deposited monolayer MoS2 rely significantly on the presence of grain boundaries (GBs) and defects. In this study, first-principles calculations were performed to investigate the electronic and magnetic properties of transition metal doped MoS2 GBs. The experimentally observed 60° tilt GBs were demonstrated with four different atomic configurations and the nonmagnetic 4|8ud GB has the lowest formation energy among the considered models. Further calculations of 4|8ud GBs doped with TMs, such as V, Cr, Mn, Fe, Co and Ni, indicate that dopants can significantly lower the formation energies of the doped GBs compared to the perfect monolayer MoS2 by occupying the GB region instead of within the grains. Magnetism can be achieved in doped GB systems by careful defect engineering. CoMo, MnMo and Niint in 4|8ud GBs are predicted to be magnetic and simultaneously energetically favorable. The electron coupling between the doped TM and surrounding GB atoms is expected to induce magnetism and high electron mobilities into the systems. This study may pave the way for optimal design of MoS2-based electronic and spintronic devices.

Graphene-Based Nanomaterials as the Cathode for Lithium-Sulfur Batteries

The global energy crisis and environmental problems are becoming increasingly serious. It is now urgent to vigorously develop an efficient energy storage system. Lithium-sulfur batteries (LSBs) are considered to be one of the most promising candidates for next-generation energy storage systems due to their high energy density. Sulfur is abundant on Earth, low-cost, and environmentally friendly, which is consistent with the characteristics of new clean energy. Although LSBs possess numerous advantages, they still suffer from numerous problems such as the dissolution and diffusion of sulfur intermediate products during the discharge process, the expansion of the electrode volume, and so on, which severely limit their further development. Graphene is a two-dimensional crystal material with a single atomic layer thickness and honeycomb bonding structure formed by sp2 hybridization of carbon atoms. Since its discovery in 2004, graphene has attracted worldwide attention due to its excellent physical and chemical properties. Herein, this review summarizes the latest developments in graphene frameworks, heteroatom-modified graphene, and graphene composite frameworks in sulfur cathodes. Moreover, the challenges and future development of graphene-based sulfur cathodes are also discussed.

Design of Local Atomic Environments in Single-Atom Electrocatalysts for Renewable Energy Conversions

Single-atom electrocatalysts (SAECs) have recently attracted tremendous research interest due to their often remarkable catalytic responses, unmatched by conventional catalysts. The electrocatalytic performance of SAECs is closely related to the specific metal species and their local atomic environments, including their coordination number, the determined structure of the coordination sites, and the chemical identity of nearest and second nearest neighboring atoms. The wide range of distinct chemical bonding configurations of a single-metal atom with its surrounding host atoms creates virtually limitless opportunities for the rational design and synthesis of SAECs with tunable local atomic environment for high-performance electrocatalysis. In this review, the authors first identify fundamental hurdles in electrochemical conversions and highlight the relevance of SAECs. They then critically examine the role of the local atomic structures, encompassing the first and second coordination spheres of the isolated metal atoms, on the design of high-performance SAECs. The relevance of single-atom dopants for host activation is also discussed. Insights into the correlation between local structures of SAECs and their catalytic response are analyzed and discussed. Finally, the authors summarize major challenges to be addressed in the field of SAECs and provide some perspectives in the rational construction of superior SAECs for a wide range of electrochemical conversions.

Modulation of electronic structures in two-dimensional electrocatalysts for the hydrogen evolution reaction

The electrocatalytic hydrogen evolution reaction (HER) has attracted substantial attention owing to its important role in realizing economic and sustainable hydrogen production via water electrolysis. Designing two-dimensional (2D) materials with large surface area, highly exposed surface sites and facile charge transport pathways is highly attractive for promoting the HER activity of the earth-abundant catalysts, and conducting rational modulations in the electronic structures is considered to be promising in further optimizing the intrinsic HER activity and thus realizing promoted HER performance. In this Feature Article, we systematically summarize recent progress in the modulation of the electronic structures of 2D HER electrocatalysts via multiple strategies including elemental doping, formation of alloyed structures, defect engineering, facet engineering, phase regulation, interface engineering and hybridization of the nanocatalysts with 2D substrates, and discuss the role of electronic structures in optimizing the intrinsic HER activity of 2D HER catalysts. We anticipate that this Feature Article will offer helpful guidance for oriented design and optimization of efficient electrocatalysts for scalable and economic hydrogen production.

Atomically Engineered Transition Metal Dichalcogenides for Liquid Polysulfide Adsorption and Their Effective Conversion in Li-S Batteries

Curtailing the polysulfide shuttle by anchoring the intermediate lithium polysulfides (LiPS) within the electrode structure is essential to impede the rapid capacity fade in lithium-sulfur (Li-S) batteries. While most of the contemporary Li-S cathode surfaces are capable of entrapping certain LiPS, developing a unique electrode material that can adsorb all the intermediates of sulfur redox is imperative. Herein, we report doping of the MoS₂ atomic structure with nickel (Ni@1TMoS₂) to modulate its absorption capability toward all LiPS and function as an electrocatalyst for Li-S redox. Detailed in situ and ex situ spectroscopic analysis revealed that both Ni and Mo sites chemically anchor all the intermediate of LiPS. Electrochemical studies and detailed kinetics analysis suggested that the conversion of liquid LiPS to solid end products are facilitated on the Ni@1TMoS₂ electrocatalytic surface. Further, the employment of the Ni@1TMoS₂ electrocatalyst enhances the Li⁺ diffusion coefficient, thus contributing to the realization of a high capacity of 1107 mA h g^-1 at 0.2C with a very limited capacity fade of 0.19% per cycle for over 100 cycles. In addition, this cathode demonstrated an excellent high rate and long cycling performance for over 300 cycles at a 1C rate.

Design of MoS2/Graphene van der Waals Heterostructure as Highly Efficient and Stable Electrocatalyst for Hydrogen Evolution in Acidic and Alkaline Media

The thermodynamically stable phase of molybdenum disulfide (MoS₂) is evaluated as a promising and durable nonprecious-metal electrocatalyst toward the hydrogen evolution reaction (HER); however, its actual catalytic activity is restricted by an inert basal plane, low electronic conductivity, low density, and using efficiency of edged atoms. Moreover, 2D/2D van der Waals (vdws) heterostructures (HSs) with face-to-face contact can construct a highly coupled interface and are demonstrated to have immense potential for catalytic applications. In the present work, a 2D/2D hetero-layered architecture of an electrocatalyst, based on the alternate arrangement of ultrasmall monolayer MoS₂ nanosheets (approximately 5-10 nm) and ultrathin graphene (G) sheets, is prepared by a facilely chemical process, which is named as MoS₂/G HS. The unique structural characteristic of MoS₂/G HS is in favor of accommodating more active sites as the centers of ad/desorption hydrogen and transferring and separating the charges at a coupled interface to improve the electronic conductivity and durability. The density functional theory calculation results further confirm that the alternately arranged G layers and MoS₂ monolayers, as well as the expanded interplanar distance of 1.104 nm for MoS₂/G HS, can exhibit a superior HER performance in both 0.5 M H₂SO₄ and 1.0 M KOH.

Excellent thermoelectric performance induced by interface effect in MoS2/MoSe2 van der Waals heterostructure

Herein, thermoelectric properties of MoS₂/MoSe₂ lateral and van der Waals heterostructure are investigated by using density functional theory calculations and non-equilibrium Green's function method. Compared with pure MoS₂, the thermoelectric performance of MoS₂/MoSe₂ lateral heterostructure is significantly improved due to the sharply decreased thermal conductance and slightly reduced power factor. Moreover, the thermoelectric performance can be further improved by constructing MoS₂/MoSe₂ van der Waals heterostructure. The room temperature ZT can reach 3.5, which is about 3 and 6 times greater than MoS₂/MoSe₂ lateral heterostructure and pure MoS₂, respectively. This is because the strongly local electron and phonon states result in an ultralow thermal conductance in MoS₂/MoSe₂ van der Waals heterostructure. Furthermore, we also find that the thermoelectric performance of MoS₂/MoSe₂ van der Waals heterostructure is insensitive to contact areas due to the competing influence of PF and total thermal conductance. The current study presents an effective strategy to improve the thermoelectric performance of 2D heterostructures, which can be extended to a variety of materials for different applications.

Vanadium-doping in interlayer-expanded MoS2 nanosheets for the efficient electrocatalytic hydrogen evolution reaction

Synergistic modulations of vanadium doping, interlayer expansion and hybrid 1T&2H phases of few-layered MoS₂ nanosheets are realized to gain structural and electronic benefits for enhanced hydrogen evolution reaction performance.

Single-Layer Cu2WS4 with Promising Electrocatalytic Activity toward Hydrogen Evolution Reaction

Two-dimensional hydrogen evolution reaction (HER) electrocatalysts are outstanding alternatives to high-cost Pt due to their good material properties. However, the few existing two-dimensional HER electrocatalysts have shortcomings that restrict their performance. Here, we report a first-principles study of single-layer A₂BS₄ (A = Ag, Cu; B= Mo, W) as HER electrocatalysts and identify single-layer Cu₂WS₄ as a promising candidate. Single-layer A₂BS₄ is found to be chemically, dynamically, and thermally stable. They require only a small energetic cost to be created from their layered bulks, suggesting the possibility of their exfoliation in experiments. Most importantly, without significant density of vacancies and in the absence of large applied strain, the basal plane of single-layer Cu₂WS₄ shows excellent electrocatalytic activity toward HER. Such an activity is attributed to the introduced in-gap states and d band center shifting upon adsorbing hydrogen. These characteristics suggest that single-layer Cu₂WS₄ is an extraordinary two-dimensional HER electrocatalyst.

Effect of Ni Doping on the MoS2 Structure and Its Hydrogen Evolution Activity in Acid and Alkaline Electrolytes

We have investigated three-dimensional (3D) MoS2 nanoarchitectures doped with different amount of Ni to boost the hydrogen evolution reaction (HER) in alkaline environment, where this reaction is normally hindered. As a comparison, the activity in acidic media was also investigated to determine and compare the role of the Ni sites in both media. The doping of MoS2, especially at high loadings, can modify its structural and/or electronic properties, which can also affect the HER activity. The structural and electronic properties of the Ni doped 3D-MoS2 nanoarchitecture were studied by X-ray diffraction (XRD), Raman spectroscopy, scanning and transmission electronic microscopy (SEM; TEM), and X-ray photoemission Spectroscopy (XPS). XPS also allowed us to determine the Ni-based species formed as a function of the dopant loading. The HER activity of the materials was investigated by linear sweep voltammetry (LSV) in 0.5 M H2SO4 and 1.0 M KOH. By combining the physicochemical and electrochemical results, we concluded that the Ni sites have a different role in the HER mechanism and kinetics in acidic and in alkaline media. Thus, NiSx species are essential to promote HER in alkaline medium, whereas the Ni-Mo-S ones enhance the HER in acid medium.

CoO Promoted the Catalytic Activity of Nitrogen-Doped MoS2 Supported on Carbon Fibers for Overall Water Splitting

Non-noble metal electrocatalysts have recently witnessed increasing attention for the hydrogen evolution reaction (HER) in acidic electrolytes. However, in alkaline electrolytes, the slow kinetics of water splitting leads to poor HER activities. In this study, we describe the preparation of a hybrid material consisting of cobalt oxide (CoO) decorated on nitrogen-doped MoS₂ supported on carbon fibers (CoO/N-MoS₂/CF) through a two-step process combining hydrothermal technique and electrochemical deposition. The electrochemical properties of the CoO/N-MoS₂/CF electrocatalyst were assessed in alkaline medium. The results revealed that CoO/N-MoS₂/CF exhibits excellent bifunctional electrocatalytic activity for the HER and oxygen evolution reaction (OER). The CoO/N-MoS₂/CF delivered a current density of 10 mA/cm² at an overpotential of only 78 mV for the HER and a current density of 50 mA/cm² at 458 mV for the OER in 1.0 M KOH, performing better than many noble metal-free electrocatalysts. The enhanced catalytic properties of the hybrid nanomaterial could be ascribed to its hierarchical structure, and increased number of active sites, as well as the synergetic cooperation between its different components. Additionally, the CoO/N-MoS₂/CF nanomaterial was investigated as both cathode and anode for full water splitting in 1.0 M KOH. The water electrolyzer delivered a maximum current density of 53 mA cm^-2 at an applied cell voltage of 1.5 V, which is very favorable for overall water-splitting applications.

Regulating the electron density of dual transition metal sulfide heterostructures for highly efficient hydrogen evolution in alkaline electrolytes

Exploring highly effective electrocatalysts with heterostructures is significant for sustainable hydrogen production by the hydrogen evolution reaction (HER). However, there are still challenges in improving the HER activities of the heterostructures to achieve efficient hydrogen production. Here, nitrogen-decorated dual transition metal sulphide heterostructures (N-NiS/MoS₂) were constructed with an enhanced HER performance in alkaline electrolytes. These novel N-NiS/MoS₂ heterostructures exhibited a low overpotential of 71 mV (10 mA cm^-2), small Tafel slope of 79 mV dec^-1 and favorable stability. In particular, the experimental and theoretical calculation results consistently demonstrated that the introduction of nitrogen can effectively tune the electronic structure of the heterostructures. Furthermore, the synergistic effect between dual-active components N-NiS and N-MoS₂ in the N-NiS/MoS₂ heterostructures effectively promoted water dissociation and hydrogen formation, leading to remarkable increase in the HER performance in an alkaline medium. This work provides a valuable avenue for the rational modulation of the electronic structure of heterostructures by hetero-atoms for highly efficient HER catalysts.

The doping and oxidation of 2D black and blue phosphorene: a new photocatalyst for nitrogen reduction driven by visible light

Boron doping and the oxidation of black and blue phosphorene can achieve improved N₂ reduction reaction performances using sunlight.