Development of All-Atom Empirical Potentials for Phloroglucinol (Phg) and Hexachlorocyclotriphosphazene (HCCP) Based on their Crystal Phase Structures

Two existing generic force fields have been augmented with partial charges and tuned in order to give intercompatible all-atom empirical potentials that can satisfactorily represent the known crystal phase structures of the organic phloroglucinol (Phg) (C6H6O3) and inorganic hexachlorocyclotriphosphazene (HCCP) (N3P3Cl6) molecules at several temperatures. It has been proposed that HCCP-Phg network polymers could act as efficient H2 barrier layers in hydrogen storage tanks for cars. However, essential requirements for modeling such networks are adequate representations of both monomers in their pure dense phases using a common form of force field. Tests of their ability to maintain stable crystal structures have been made using classical molecular dynamics (MD) simulations on large 800-molecule supercells. The force fields have been optimized to match the densities calculated from the experimental unit cell dimensions at ambient conditions as well as the intermolecular potential energy, as estimated from experimental enthalpies of sublimation. For Phg, the crystal structure is stabilized by a network of hydrogen bonds and the Coulombic interactions contribute to over 55% of the total intermolecular potential energy. In contrast, the crystal structure of HCCP is intrinsically stabilized by the van der Waals terms. Both optimized force fields reproduce very well the orthorhombic symmetry of their respective crystals under constant-pressure NPT conditions. The model parameters tuned at ambient temperature also give reasonable agreement with crystallographic data at lower temperatures.

Synchronous modification of ZIF-67 with cyclomatrix polyphosphazene coating for efficient flame retardancy and mechanical reinforcement of epoxy resin

Cyclomatrix polyphosphazenes have attracted widespread attention in the field of polymer flame retardancy. Nevertheless, the optimal manifestation of their distinctive structural attributes and flame-retardant properties necessitates a judicious selection of condensation monomers and synergistic templates during the fabrication of polyphosphazene flame retardants. In our previous studies, it was discovered that when ZIF-67 is functionalized with polyphosphazene, the by-product HCl from phosphazene polycondensation causes etching on ZIF-67. Based on this "synchronous etching" effect, a series of hybrid materials comprising cyclomatrix polyphosphazene and ZIF-67, denoted as ZIF-67@PDS (PDS, poly-(cyclotriphosphazene-co-4,4'-diaminodiphenyl sulfone)), ZIF-67@PBS (PBS, poly-(cyclotriphosphazene-co-Bisphenol A)), and ZIF-67@PZS (PZS, poly-(cyclotriphosphazene-co-4,4'-sulfonyldiphenol)), was synthesized utilizing DDS (4,4'-diaminodiphenyl sulfone), BPA (Bisphenol A), and BPS (4,4'-sulfonyldiphenol) monomers as precursors, respectively. Upon the incorporation of 2.0 wt.% of ZIF-67@PDS, ZIF-67@PBS, and ZIF-67@PZS, the flame retardant and mechanical characteristics of EP composites exhibited marked enhancement. The unique structural characteristics of hybrid and the synergistic effects of Co-P-N contribute to the improvement of comprehensive properties. Compared with pure EP, EP/ZIF-67@PZS has the best enhancement effect, and its pHRR, THR, and TSP decreased by 34.0%, 30.0%, and 40.5%, respectively. In terms of mechanical strength, ZIF-67@PZS also increases the flexural strength of EP by 37.42%. Relying on the "synchronous etching" effect, this study explores and verifies the effective combination of ZIF-67 and different types of polyphosphazenes, and obtains a series of ZIF-67-derived cyclomatrix polyphosphazene hybrids with different morphologies and properties in one step. It provides a new idea and strategy for the simultaneous modification of polyphosphazene materials and the preparation of multifunctional flame retardants in the future.

Building Flame-Retardant Polymer Electrolytes via Microcapsule Technology for Stable Lithium Batteries

Flame retardants could improve the safety properties of lithium batteries (LBs) with the sacrifice of electrochemical performance due to parasitic reactions. To concur with this, we designed thermal-response clothes for hexachlorophosphazene (HCP) additives by the microcapsule technique with urea-formaldehyde (UF) resin as the shell. HCP@UF combines with polyacrylonitrile (PAN) by hydrogen bonds successfully to form PAN-HCP@UF as the flame-retardant solid polymer electrolyte. The hydrogen bonds ensure excellent mechanical properties of the polymer electrolyte. The multiscale free radical-annihilating agent HCP effectively eliminates hydrogen free radicals of electrolytes under high temperature, showing excellent flame retardation. During the operation of the battery, functional groups on the UF resin act as active sites to promote the migration of lithium ions, while the internal HCP is protected from electrochemical reaction. With 25% HCP@UF addition, the limiting oxygen index of the PAN-HCP@UF increases to 28% and the Li+ transfer number up to 0.80. By UF protection, the initial capacity retention rate of the Li||LFP battery that assembles with PAN-HCP@UF is 88.8% after 500 cycles at 0.5 C. Thus, the microcapsule-encapsulated approach is deemed to provide an innovative strategy to prepare high-safety solid-state LB with a stable long cycle life.

Nonaqueous Interfacial Polymerization-Derived Polyphosphazene Films for Sieving or Blocking Hydrogen Gas

A series of cyclomatrix polyphosphazene films have been prepared by nonaqueous interfacial polymerization (IP) of small aromatic hydroxyl compounds in a potassium hydroxide dimethylsulfoxide solution and hexachlorocyclotriphosphazene in cyclohexane on top of ceramic supports. Via the amount of dissolved potassium hydroxide, the extent of deprotonation of the aromatic hydroxyl compounds can be changed, in turn affecting the molecular structure and permselective properties of the thin polymer networks ranging from hydrogen/oxygen barriers to membranes with persisting hydrogen permselectivities at high temperatures. Barrier films are obtained with a high potassium hydroxide concentration, revealing permeabilities as low as 9.4 × 10^-17 cm³ cm cm^-2 s^-1 Pa^-1 for hydrogen and 1.1 × 10^-16 cm³ cm cm^-2 s^-1 Pa^-1 for oxygen. For films obtained with a lower concentration of potassium hydroxide, single gas permeation experiments reveal a molecular sieving behavior, with a hydrogen permeance of around 10^-8 mol m^-2 s^-1 Pa^-1 and permselectivities of H₂/N₂ (52.8), H₂/CH₄ (100), and H₂/CO₂ (10.1) at 200 °C.

Oligoetherols and polyurethane foams based on cyclotriphosphazene of reduced flammability

New oligoetherols with based on cyclotriphosphazene ring were synthesized by functionalization of hexachlorocyclotriphosphazene with glycidol followed by reaction with ethylene glycol and glycerol. Oligoetherols were characterized by IR, 1H-NMR, and MALDI-ToF and hydroxyl number as well as physical properties like density, viscosity and surface tension. The oligoetherols were further converted into polyurethane foams. The rigid foams of enhanced thermal stability and considerably diminished flammability were obtained and their apparent density, water uptake and polymerization shrinkage, thermal conductivity coefficient and thermal stability were determined. The flammability of foams was studied by microcalorimetric methods, horizontal flaming test and oxygen index. The obtained polyurethane foams with incorporated cyclotriphosphazene ring are self-extinguishing.

Graphical abstract

Polyoxovanadate-Based Cyclomatrix Polyphosphazene Microspheres as Efficient Heterogeneous Catalysts for the Selective Oxidation and Desulfurization of Sulfides

The [V₆O₁₃]^2- cluster is successfully immobilized to the polymeric framework of cyclomatrix polyphosphazene via the facile precipitation polymerization between the phenol group symmetrically modified [V₆O₁₃]^2- and hexachlorocyclotriphosphazene. The structure of the as-prepared polyoxometalate-containing polyphosphazene (HCCP-V) was characterized by FT-IR, XPS, TGA, BET, as well as SEM and zeta potential. The presence of a rigid polyoxometalate cluster not only supports the porous structure of the polymeric framework but also provides an improved catalytic oxidation property. By using H₂O₂ as an oxidant, the as-prepared HCCP-V exhibited improved catalytic oxidation activity toward MPS, DBT, and CEES, which can achieve as high as 99% conversion. More importantly, the immobilization of POMs in the network of cyclomatrix polyphosphazene also provides better recyclability and stability of the heterogeneous catalyst.

Polyoctahedral Silsesquioxane Hexachlorocyclotriphosphazene Membranes for Hot Gas Separation

There is a need for gas separation membranes that can perform at high temperatures, for example, for CO₂ capture in industrial processes. Polyphosphazenes classify as interesting materials for use under these conditions because of their high thermal stability, hybrid nature, and postfunctionalization options. In this work, thin-film composite cyclomatrix polyphosphazene membranes are prepared via the interfacial polymerization reaction between polyhedral oligomeric silsesquioxane and hexachlorocyclotriphosphazene on top of a ceramic support. The prepared polyphosphazene networks are highly crosslinked and show excellent thermal stability until 340 °C. Single gas permeation experiments at temperatures ranging from 50 to 250 °C reveal a molecular sieving behavior, with permselectivities as high as 130 for H₂/CH₄ at the low temperatures. The permselectivities of the membranes persist at the higher temperatures; at 250 °C H₂/N₂ (40), H₂/CH₄ (31) H₂/CO₂ (7), and CO₂/CH₄ (4), respectively, while maintaining permeances in the order of 10^-7 to 10^-8 mol m^-2 s^-1 Pa^-1. Compared to other types of polymer-based membranes, especially the H₂/N₂ and H₂/CH₄ selectivities are high, with similar permeances. Consequently, the hybrid polyphosphazene membranes have great potential for use in high-temperature gas separation applications.

New Method toward a Robust Covalently Attached Cross-Linked Nanofiltration Membrane

As nanofiltration applications increase in diversity, there is a need for new fabrication methods to prepare chemically and thermally stable membranes with high retention performance. In this work, thio-bromo "click" chemistry was adapted for the fabrication of a robust covalently attached and ultrathin nanofiltration membrane. The selective layer was formed on a pre-functionalized porous ceramic surface via a novel, liquid-vapor interfacial polymerization method. Compared to the most common conventional interfacial polymerization procedure, no harmful solvents and a minimal amount of reagents were used. The properties of the membrane selective layer and its free-standing equivalent were characterized by complementary physicochemical analysis. The stability of the thin selective layer was established in water, ethanol, non-polar solvents, and up to 150 °C. The potential as a nanofiltration membrane was confirmed through solvent permeability tests (water, ethanol, hexane, and toluene), PEG-in-water molecular weight cut-off measurements (≈700 g mol^-1), and dye retention measurements.

Functional Catechol-Metal Polymers via Interfacial Polymerization for Applications in Water Purification

Phenols and polyphenols have been used as a scaffold for generating multidimensional molecular architectures via complexation with metal ions. Here, we report the synthesis and characterization of metallopolymer films from three catechol derivatives having different alkyl/aryl substituents via complexation with iron and copper ions at the organic-water interface. Such interfacial polymerization is instantaneous, one step to generate functional materials, and gives good control over the organization of repeating units along the film. The films were transferred to different substrates such as filter paper, cotton, or polyester fabrics. The films are superhydrophobic with a contact angle >160° which can be tuned by regulating the orientation of nonpolar groups at the interface during polymerization. In addition, the fabricated cloth membrane showed excellent oil/water separation efficiency of more than 99% even after 50 cycles. The polymers also showed good dye extraction capacity from aqueous solutions with fast kinetics data. Such metallopolymer networks can serve as a versatile material for applications in catalysis, protective coatings, drug delivery, water filtration membranes, and liquid separations.