Enzyme-Triggered Polyelectrolyte Complex for Responsive Delivery of α-Helical Polypeptides to Optimize Antibacterial Therapy

Responsive nanomaterials hold significant promise in the treatment of bacterial infections by recognizing internal or external stimuli to achieve stimuli-responsive behavior. In this study, we present an enzyme-responsive polyelectrolyte complex micelles (PTPMN) with α-helical cationic polypeptide as a coacervate-core for the treatment of Escherichia coli (E. coli) infection. The complex was constructed through electrostatic interaction between cationic poly(glutamic acid) derivatives and phosphorylation-modified poly(ethylene glycol)-b-poly(tyrosine) (PEG-b-PPTyr) by directly dissolving them in aqueous solution. The cationic polypeptide adopted α-helical structure and demonstrated excellent broad-spectrum antibacterial activity against both Gram-negative and Gram-positive bacteria, with a minimum inhibitory concentration (MIC) as low as 12.5 μg mL-1 against E. coli. By complexing with anionic PEG-b-PPTyr, the obtained complex formed β-sheet structures and exhibited good biocompatibility and low hemolysis. When incubated in a bacterial environment, the complex cleaved its phosphate groups triggered by phosphatases secreted by bacteria, exposing the highly α-helical conformation and restoring its effective bactericidal ability. In vivo experiments confirmed accelerated healing in E. coli-infected wounds.

Recent advances in post-polymerization modifications on polypeptides: synthesis and applications

Polypeptides, a kind of very promising biomaterial, have shown a wide range of applications due to their excellent biocompatibility, easy accessibility, and structural variability. To synthesize polypeptides with desired functions, post-polymerization modification (PPM) plays an important role in introducing novel chemical structure on their side-chains. The key of PPM strategy is to develop highly selective and efficient reactions that can couple the additional functional moieties with pre-installed side-chain functionalities on polypeptides. In this minireview, classic PPM reactions and especially their recent progresses are summarized, including different modification approaches for unsaturated alkyl group, oxygen-containing functional group, nitrogen-containing functional group, sulfur-containing functional group and other special functional group on side chains. In addition, this review also highlights the applications of structure-diversified polypeptides generated via PPM strategy in the field of biomaterial.

An Effective Strategy to Develop Potent and Selective Antifungal Agents from Cell Penetrating Peptides in Tackling Drug-Resistant Invasive Fungal Infections

The high mortality rate of invasive fungal infections and quick emergence of drug-resistant fungal pathogens urgently call for potent antifungal agents. Inspired by the cell penetrating peptide (CPP) octaarginine (R8), we elongated to 28 residues poly(d,l-homoarginine) to obtain potent toxicity against both fungi and mammalian cells. Further incorporation of glutamic acid residues shields positive charge density and introduces partial zwitterions in the obtained optimal peptide polymer that displays potent antifungal activity against drug-resistant fungi superior to antifungal drugs, excellent stability upon heating and UV exposure, negligible in vitro and in vivo toxicity, and strong therapeutic effects in treating invasive fungal infections. Moreover, the peptide polymer is insusceptible to antifungal resistance owing to the unique CPP-related antifungal mechanism of fungal membrane penetration followed by disruption of organelles within fungal cells. All these merits imply the effectiveness of our strategy to develop promising antifungal agents.

Fabrication of Cationic Poly(vinyl alcohol) Films Cross-Linked Using Copolymers Containing Quaternary Ammonium Cations, Benzoxaborole, and Carboxy Groups

Water-insoluble cationic poly(vinyl alcohol) (PVA) films were fabricated using a mixed aqueous solution of PVA and poly([2-(methacryloyloxy)ethyl]trimethylammonium chloride (METAC)-co-methacrylic acid (MAAc)-co-5-methacrylamido-1,2-benzoxaborole (MAAmBO)) copolymer (3D). The surface of the PVA film is typically negatively charged, and simple fabrication methods for water-insoluble PVA films with cationic surface charges are required to expand their application fields. METAC, which has a permanent positive charge owing to the presence of a quaternary ammonium cation, was selected as the cationic unit. The MAAc and MAAmBO units were used as two types of cross-linking structures for the thermal cross-linking of the hydroxy and carboxy groups of the MAAc unit (covalent bonding) as well as the diol and benzoxaborole groups of the MAAmBO unit (dynamic covalent bonding). The films were thermally cross-linked at 135 °C for 4 h without the addition of materials. After immersion in surplus water at 80 °C for 3 h, the cross-linked PVA/3D films retained almost 100% of their weights. The ζ-potential of the water-insoluble PVA/3D film was 9.4 ± 0.8 mV. The PVA/3D film was strongly dyed using anionic acid red 1 (AR1) because of its positively charged surface. Interestingly, it could also be slightly dyed using cationic methylene blue (MB) and became transparent (original state) after immersion in water for 2 days. These results suggested that positive and negative charges coexisted in the PVA/3D film, and the surface properties were positively inclined. Moreover, the degree of hemolysis of the PVA/3D films was similar to that of the negative control, which showed high blood compatibility. To our knowledge, this is the first report on the fabrication of water-insoluble cationic PVA films using two types of cross-linking structures containing carboxy and benzoxaborole groups. The cross-linked PVA films were analyzed using Fourier transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), and contact angle (CA) and ζ-potential measurement, as well as by determining the mechanical properties, adsorption of charged molecules, and biocompatibility. These readily fabricated water-insoluble PVA films with positive charges can show potential applications in sensors, adsorption systems, and antimicrobial materials.

Facile Synthesis of Imidazolium-Based Block Copolypeptides with Excellent Antimicrobial Activity

Antimicrobial polypeptides are promising mimics of antimicrobial peptides (AMPs) with low risks of antimicrobial resistance (AMR). Polypeptides with facile and efficient production, high antimicrobial activity, and low toxicity toward mammalian cells are highly desirable for practical applications. Herein, triblock copolypeptides with chloro groups (PPG_n-PCPBLG_m) and different main-chain lengths were synthesized via an ultrafast ring-opening polymerization (ROP) using a macroinitiator, namely poly(propylene glycol) bis(2-aminopropyl ether), and purified or nonpurified monomer (i.e., CPBLG-NCA). PPG_n-PCPBLG_m with 90 amino acid residues can be readily prepared within 300 s. Imidazolium-based block copolypeptides (PPG_n-PIL_m) were facilely prepared via nucleophilic substitution of PPG_n-PCPBLG_m with NaN₃ and subsequent "click" chemistry. α-Helical PPG_n-PIL_m can self-assemble into nanostructured and cationic micelles which displayed highly potent antimicrobial activity and low hemolysis. The top-performing material, namely PPG₃₄-PIL₇₀, showed low minimum inhibitory concentration (MIC) against both Gram-positive S. aureus and Gram-negative E. coli (25 μg mL^-1). It also displayed low toxicity against mouse embryonic fibroblast (NIH 3T3) and human embryonic kidney (293T) cells at 2× MIC.

Transition of Conformation and Solubility in β-Sheet-Structured Poly(l-cysteine)s with Methylthio or Sulfonium Pendants

Poly(l-cysteine)s with methylthio pendants (PMTLCs) were synthesized by ring-opening polymerization of a new l-cysteine-based N-carboxyanhydride. The thioether bonds of PMTLC can be readily oxidized by H₂O₂ yielding water-soluble PMTLC^OX. The methylthio groups can undergo an alkylation reaction using methyl iodide and a subsequent ion-exchange reaction yielding sulfonium-based polypeptides (PPLC-DMS-X, where X = I, BF₄). PPLC-DMS-X showed upper critical solution temperature-type thermo- and oxidation-responsive properties in aqueous solutions. Both PMTLC and PPLC-DMS-X showed oxidation-induced β-sheet to α-helix transitions. The absorbance of PPLC-DMS-I and methyl orange aqueous solution displayed a significant linear correlation with temperature, which makes the sulfonium-based polypeptides good candidates in the field of temperature sensors.

Structural design and antimicrobial properties of polypeptides and saccharide–polypeptide conjugates

The development and progress of antimicrobial polypeptides and saccharide–polypeptide conjugates in regards to their structural design, biological functions and antimicrobial mechanism.

Thermo- and oxidation-sensitive poly(meth)acrylates based on alkyl sulfoxides: dual-responsive homopolymers from one functional group

Alkyl sulfoxide side groups introduce thermo- and oxidation-sensitivity into poly(meth)acrylates, thus realizing new dual-responsive homopolymers based on one functional group.

Thermoresponsive behavior of poly[trialkyl-(4-vinylbenzyl)ammonium] based polyelectrolytes in aqueous salt solutions

A systematic method to induce thermoresponsive behavior for polycations with salts from the reversed Hofmeister series is introduced.