Photocatalytic functionalization of white phosphorus with aryl bromides and chlorides

We report the implementation of a consecutive photoinduced electron transfer (conPET) strategy for the functionalization of white phosphorus (P4) with inexpensive and widely available aryl bromides and chlorides. By employing a well-known acridinium-based photocatalyst under near-UV irradiation, this protocol gives direct access to valuable triarylphosphines and tetraarylphosphonium salts. The reaction mechanism is elucidated by NMR spectroscopic studies and model reactions.

Recent progress on the functionalization of white phosphorus in China

Direct synthesis of organophosphorus compounds from white phosphorus represents a significant but challenging subject, especially in the context of ongoing efforts to comprehensively improve the phosphorus-derived chemical industry driven by sustainability and safety concerns. China is the world's largest producer of white phosphorus, creating a significant demand for the green transformation of this crucial feedstock. This review provides an overview of advancements in white phosphorus activation by Chinese research teams, focusing on the direct construction of P‒C/N/O/S/M bonds from white phosphorus. Additionally, we offer some insights into prospective directions for the activation and transformation of white phosphorus in the future. This review paper aims to attract more researchers to engage in this area, stimulating follow-up exploration and fostering enduring advances.

Direct Synthesis of Phosphoryltriacetates from White Phosphorus via Visible Light Catalysis

Organophosphorus compounds (OPCs) are widely used in many fields. However, traditional synthetic routes in the industry usually involve multistep and hazardous procedures. Therefore, it's of great significance to construct such compounds in an environmentally-friendly and facile way. Herein, a photoredox catalytic method has been developed to construct novel phosphoryltriacetates. Using fac-Ir(ppy)3 (ppy=2-phenylpyridine) as the photocatalyst and blue LEDs (456 nm) as the light source, white phosphorus can react with α-bromo esters smoothly to generate phosphoryltriacetates in moderate to good yields. This one-step approach features mild reaction conditions and simple operational process without chlorination.

Sustainable Photo- and Electrochemical Transformation of White Phosphorous (P4 ) into P1 Organo-Compounds

Elemental white phosphorous (P4 ) is a crucial feedstock for the entire phosphorus-derived chemical industry, serving as a common precursor for the ultimate preparation of high-grade monophosphorus (P1 ) fine chemicals. However, the corresponding manufacturing processes generally suffer from a deep reliance on hazardous reagents, inputs of immense energy, emissions of toxic pollutants, and the generation of substantial waste, which have negative impacts on the environment. In this context, sustainability and safety concerns provide a consistent impetus for the urgent overall improvement of phosphorus cycles. In this Concept, we present an overview of the most recent growth in photo- and electrochemical synthesis of P1 organo-compounds from P4 , with special emphasis on sustainable features. The key aspects of innovations regarding activation mode and mechanism have been comprehensively analyzed. A preliminary look at the possible future direction of development is also provided.

Photochemical Benzylation of White Phosphorus

Organophosphorus compounds (OPCs) have wide application in organic synthesis, material sciences, and drug discovery. Generally, the vast majority of phosphorus atoms in OPCs are derived from white phosphorus (P4). However, the large-scale preparation of OPCs mainly proceeds through the multistep and environmentally toxic chlorine route from P4. Herein, we report the direct benzylation of P4 promoted by visible light. The cheap and readily available benzyl bromide was used as a benzylation reagent, and tetrabenzylphosphonium bromide was directly synthesized from P4. In addition, the metallaphotoredox catalysis strategy was applied to functionalize P4 for the first time, which significantly improved the application range of the substituted benzyl bromide.

Controlled introduction of functional groups at one P atom in [Cp*Fe(η5-P5)] and release of functionalised phosphines

By salt metathesis reactions of the anionic complexes of the type [Cp*Fe(η⁴-P₅R)]^- (R = ^tBu (1a), Me (1b), -C[triple bond, length as m-dash]CPh (1c); Cp* = 1,2,3,4,5-pentamethylcyclopentadienyl) with organic electrophiles (XR^FG; X = halogen; R^FG = (CH₂)₃Br, (CH₂)₄Br, Me) a variety of organo-substituted polyphosphorus ligand complexes of the type [Cp*Fe(η⁴-P₅RR^FG)] (2) are obtained. Thereby, organic substituents with different functional groups (FG), such as halogens or nitriles, are introduced. In [Cp*Fe(η⁴-P₅RR')] (2a: R = ^tBu, R' = (CH₂)₃Br), the bromine substituent can be easily substituted, leading to functionalized complexes [{Cp*Fe(η⁴-P₅tBu)}(CH₂)₃{Cp*Fe(η⁴-P₅Me)}] (4) and [Cp*Fe(η⁴-P₅RR')] (5) (R = ^tBu, R' = (CH₂)₃PPh₂) or by abstraction of a phosphine to the asymmetric substituted phosphine tBu(Bn)P(CH₂)₃Bn (6). The reaction of the dianionic species [K(dme)₂]₂[Cp*Fe(η⁴-P₅)] (I') with bromo-nitriles leads to [Cp*Fe{η⁴-P₅((CH₂)₃CN)₂}] (7), allowing the introduction of two functional groups attached to one phosphorus atom. 7 reacts with ZnBr₂ in a self-assembly reaction to form the supramolecular compound [Cp*Fe{η⁴-P₅((CH₂)₃CN)₂}ZnBr₂]_n (8).

Photocatalytic stannylation of white phosphorus

Organophosphorus compounds (OPCs) are highly important chemicals, finding numerous applications in both academia and industry. Herein we describe a simple photocatalytic method for the stannylation of white phosphorus (P₄) using a cheap, commercially-available distannane, (Bu₃Sn)₂, and anthraquinone as a simple photocatalyst. Subsequent ‘one pot’ transformation of the resulting stannylated monophosphine intermediate (Bu₃Sn)₃P provides direct, convenient and versatile access to valuable OPCs such as acylated phosphines and tetraalkylphosphonium salts.

A simple, mechanistically unique photochemical procedure is reported for the efficient, direct, catalytic stannylation of P₄ and ‘one pot’ transformation into valuable monophosphorus compounds.

Recent Breakthroughs in P4 Chemistry: Towards Practical, Direct Transformations into P1 Compounds

For several decades, academic researchers have been intensively studying the chemistry of white phosphorus (P4 ) in the hope of developing direct methods for its transformation into useful P-containing products. This would bypass the hazardous, multistep procedures currently relied on by industry. However, while academically interesting P4 activation reactions have become well established, their elaboration into useful, general synthetic procedures has remained out of reach. Very recently, however, a series of independent reports has begun to change this state of affairs. Each shows how relatively simple and practical synthetic methods can be used to access academically or industrially relevant P1 compounds from P4 directly, in "one pot" or even in a catalytic fashion. These reports mark a step change in the field of P4 chemistry, and suggest its possible transition from an area of largely academic interest to one with the promise of true synthetic relevance.

Facile Synthesis of the Dicyanophosphide Anion via Electrochemical Activation of White Phosphorus: An Avenue to Organophosphorus Compounds

Organophosphorus compounds (OPCs) have gained tremendous interest in the past decades due to their wide applications ranging from synthetic chemistry to materials and biological sciences. We describe herein a practical and versatile approach for the transformation of white phosphorus (P₄) into useful OPCs with high P atom economy via a key bridging anion [P(CN)₂]^-. This anion can be prepared on a gram scale directly from P₄ through an electrochemical process. A variety of OPCs involving phosphinidenes, cyclophosphanes, and phospholides have been made readily accessible from P₄ in a two-step manner. Our approach has a significant impact on the future preparation of OPCs in laboratory and industrial settings.

Photochemical transformation of chlorobenzenes and white phosphorus into arylphosphines and phosphonium salts

Chlorobenzenes are important starting materials for the preparation of commercially valuable triarylphosphines and tetraarylphosphonium salts, but their use for the direct arylation of elemental phosphorus has been elusive. Here we describe a simple photochemical route toward such products. UV-LED irradiation (365 nm) of chlorobenzenes, white phosphorus (P₄) and the organic superphotoreductant tetrakis(dimethylamino)ethylene (TDAE) affords the desired arylphosphorus compounds in a single reaction step.

Photocatalytic Arylation of P4 and PH3 : Reaction Development Through Mechanistic Insight

Detailed 31 P{1 H} NMR spectroscopic investigations provide deeper insight into the complex, multi-step mechanisms involved in the recently reported photocatalytic arylation of white phosphorus (P4 ). Specifically, these studies have identified a number of previously unrecognized side products, which arise from an unexpected non-innocent behavior of the commonly employed terminal reductant Et3 N. The different rate of formation of these products explains discrepancies in the performance of the two most effective catalysts, [Ir(dtbbpy)(ppy)2 ][PF6 ] (dtbbpy=4,4'-di-tert-butyl-2,2'-bipyridine) and 3DPAFIPN. Inspired by the observation of PH3 as a minor intermediate, we have developed the first catalytic procedure for the arylation of this key industrial compound. Similar to P4 arylation, this method affords valuable triarylphosphines or tetraarylphosphonium salts depending on the steric profile of the aryl substituents.

A Structural Diversity of Molecular Alkaline-Earth-Metal Polyphosphides: From Supramolecular Wheel to Zintl Ion

A series of molecular group 2 polyphosphides has been synthesized by using air-stable [Cp*Fe(η5 -P5 )] (Cp*=C5 Me5 ) or white phosphorus as polyphosphorus precursors. Different types of group 2 reagents such as organo-magnesium, mono-valent magnesium, and molecular calcium hydride complexes have been investigated to activate these polyphosphorus sources. The organo-magnesium complex [(Dipp BDI-Mg(CH3 ))2 ] (Dipp BDI={[2,6-i Pr2 C6 H3 NCMe]2 CH}- ) reacts with [Cp*Fe(η5 -P5 )] to give an unprecedented Mg/Fe-supramolecular wheel. Kinetically controlled activation of [Cp*Fe(η5 -P5 )] by different mono-valent magnesium complexes allowed the isolation of Mg-coordinated formally mono- and di-reduced products of [Cp*Fe(η5 -P5 )]. To obtain the first examples of molecular calcium-polyphosphides, a molecular calcium hydride complex was used to reduce the aromatic cyclo-P5 ring of [Cp*Fe(η5 -P5 )]. The Ca-Fe-polyphosphide is also characterized by quantum chemical calculations and compared with the corresponding Mg complex. Moreover, a calcium coordinated Zintl ion (P7 )3- was obtained by molecular calcium hydride mediated P4 reduction.

Pentaphosphaferrocene-mediated synthesis of asymmetric organo-phosphines starting from white phosphorus

The synthesis of phosphines is based on white phosphorus, which is usually converted to PCl₃, to be afterwards substituted step by step in a non-atomic efficient manner. Herein, we describe an alternative efficient transition metal-mediated process to form asymmetrically substituted phosphines directly from white phosphorus (P₄). Thereby, P₄ is converted to [Cp*Fe(η⁵-P₅)] (1) (Cp* = η⁵-C₅(CH₃)₅) in which one of the phosphorus atoms is selectively functionalized to the 1,1-diorgano-substituted complex [Cp*Fe(η⁴-P₅R'R″)] (3). In a subsequent step, the phosphine PR'R″R‴ (R' ≠ R″ ≠ R‴ = alky, aryl) (4) is released by reacting it with a nucleophile R‴M (M = alkali metal) as racemates. The starting material 1 can be regenerated with P₄ and can be reused in multiple reaction cycles without isolation of the intermediates, and only the phosphine is distilled off.

Diphenyl Diselenide-Catalyzed Synthesis of Triaryl Phosphites and Triaryl Phosphates from White Phosphorus

Industrially important triaryl phosphites, traditionally prepared from PCl₃, have been synthesized by a diphenyl diselenide-catalyzed one-step procedure involving white phosphorus and phenols, which provides a halogen- and transition metal-free way to these compounds. Subsequent oxidation of triaryl phosphites produces triaryl phosphates and triaryl thiophosphates. Phosphorotrithioates are also prepared efficiently from aromatic thiols and aliphatic thiols.

Synthesis of monophosphines directly from white phosphorus

Monophosphorus compounds are of enormous industrial importance due to the crucial roles they play in applications such as pharmaceuticals, photoinitiators and ligands for catalysis, among many others. White phosphorus (P₄) is the key starting material for the preparation of all such chemicals. However, current production depends on indirect and inefficient, multi-step procedures. Here, we report a simple, effective 'one-pot' synthesis of a wide range of organic and inorganic monophosphorus species directly from P₄. Reduction of P₄ using tri-n-butyltin hydride and subsequent treatment with various electrophiles affords compounds that are of key importance for the chemical industry, and it requires only mild conditions and inexpensive, easily handled reagents. Crucially, we also demonstrate facile and efficient recycling and ultimately catalytic use of the tributyltin reagent, thereby avoiding the formation of substantial Sn-containing waste. Accessible, industrially relevant products include the fumigant PH₃, the reducing agent hypophosphorous acid and the flame-retardant precursor tetrakis(hydroxymethyl)phosphonium chloride.

Fragmentation Mechanism of White Phosphorus: A Theoretical Insight into Multiple Cleavage/Formation of P-P and P-C Bonds

Molecular-level understanding of metal-mediated white phosphorus (P₄ ) activation is meaningful but challenging because of its direct relevance to the conversion of P₄ into useful organophosphorus compounds as well as the complicated and unforeseeable cleavage process of P-P bonds. The related study, however, has still rarely been achieved to date. Here, a theoretical insight into the step-by-step process of three P-P bond cleavage/four P-C bond formation for [P₃ +P₁ ]-fragmentation of P₄ mediated by lutetacyclopentadienes is reported. The unique charge-separated intermediate and the intermolecular cooperation between two lutetacyclopentadienes play a vital role in the subsequent P-P/P-C bond breaking/forming. It is found that, although the first P-C formation is involved in the assembly of the cyclo-P₃ [R₄ C₄ P₃ ]^- unit, the construction of the aromatic five-membered P₁ heterocycle [R₄ C₄ P]^- is completed prior to the cyclo-P₃ formation. The reaction mechanism has been carefully elucidated by analyses of the geometric structure, frontier molecular orbitals, bond index, and natural charge, which greatly broaden and enrich the general knowledge of the direct functionalization of P₄ .

Let's Make White Phosphorus Obsolete

Industrial and laboratory methods for incorporating phosphorus atoms into molecules within the framework of Green Chemistry are in their infancy. Current practice requires large inputs of energy, involves toxic intermediates, and generates substantial waste. Furthermore, a negligible fraction of phosphorus-containing waste is recycled which in turn contributes to negative environmental impacts, such as eutrophication. Methods that begin to address some of these drawbacks are reviewed, and some key opportunities to be realized by pursuing organophosphorus chemistry under the principles of Green Chemistry are highlighted. Methods used by nature, or in the chemistry of other elements such as silicon, are discussed as model processes for the future of phosphorus in chemical synthesis.

Organophosphorus chemistry based on elemental phosphorus: advances and horizons

The results of studies on the application of elemental phosphorus for the synthesis of important organophosphorus compounds are surveyed and summarized. Currently, this trend represents a synthetically, environmentally and technologically attractive alternative to classical organophosphorus chemistry based on toxic and corrosive phosphorus chlorides. Direct phosphination and phosphinylation of organic compounds with elemental phosphorus (discussed in the first part of the review) basically extend the range of available phosphines, phosphine chalcogenides and phosphinic acids and provides further development of their synthetic potential (discussed in the second part of the review). It is shown that the breakthrough in this area is largely due to the discovery of reactions of elemental phosphorus (white and red) with various electrophiles in superbasic suspensions and emulsions derived from alkali metal hydroxides and to the development of electrochemical, electrocatalytic and catalytic activation of white phosphorus.

The bibliography includes 299 references.

Direct catalytic transformation of white phosphorus into arylphosphines and phosphonium salts

Phosphorus compounds are ubiquitous in the chemical sciences, finding applications throughout industry and academia. Of particular interest to synthetic chemists are organophosphorus compounds, which contain P-C bonds. However, state-of-the-art processes for the synthesis of these important materials rely on an inefficient, stepwise methodology involving initial oxidation of white phosphorus (P₄) with hazardous chlorine gas and the subsequent displacement of chloride ions. Catalytic P₄ organofunctionalisation reactions have remained elusive, as they require multiple P-P bond breaking and P-C bond formation events to break down the P₄ core, all of which must occur in a controlled manner. Herein, we describe an efficient transition metal-catalyzed process capable of forming P-C bonds from P₄. Using blue light photocatalysis, this method directly affords valuable triarylphosphines and tetraarylphosphonium salts in a single reaction step.

Perfluorinated phosphine and hybrid P-O ligands for Pd catalysed C-C bond forming reactions in solution and on Teflon supports

The synthesis of two types of phosphine ligands that feature perfluorinated ponytails is reported. A bidentate (RfCH2CH2)2PCH2CH2P(CH2CH2Rf)2 (Rf = CF3(CF2) n ; n = 5, 7) and an alkoxyphosphine made by ring opening a fluorous epoxide, RfCH2CH(OH)CH2PR2 (Rf = CF3(CF2)7), have been prepared and spectroscopically characterised. The electronic effects of the fluorous chains have been elucidated from either the 1 J Pt-P or 1 J P-Se coupling constants in Pt(ii) or phosphine selenide compounds. Whilst the bidentate phosphines do not give stable or active Pd catalysts, the hybrid ligand does allow Susuki, Heck and Sonogashira catalysis to be demonstrated with low catalyst loadings and good turnovers. Whilst a fluorous extraction methodology does not give good performance, the ligand can be adsorbed onto Teflon tape and for the Suzuki cross coupling reaction the catalytic system can be run 6 times before activity drops and this has been traced to oxidation of the ligand. Additionally the crystal structure of the hybrid phosphine oxide is reported and the non-covalent interactions discussed.