Synthesis and characterization of novel donor–acceptor type neutral green electrochromic polymers containing an indolo[3,2-b]carbazole donor and diketopyrrolopyrrole acceptor

1,4-Bis((9H-Carbazol-9-yl)Methyl)Benzene-Containing Electrochromic Polymers as Potential Electrodes for High-Contrast Electrochromic Devices

Four 1,4-bis((9H-carbazol-9-yl)methyl)benzene-containing polymers (PbCmB, P(bCmB-co-bTP), P(bCmB-co-dbBT), and P(bCmB-co-TF)) were electrosynthesized onto ITO transparent conductive glass and their spectral and electrochromic switching performances were characterized. The PbCmB film displayed four types of color variations (bright gray, dark gray, dark khaki, and dark olive green) from 0.0 to 1.2 V. P(bCmB-co-bTP) displayed a high transmittance variation (∆T = 39.56% at 685 nm) and a satisfactory coloration efficiency (η = 160.5 cm²∙C⁻¹ at 685 nm). Dual-layer organic electrochromic devices (ECDs) were built using four bCmB-containing polycarbazoles and poly(3,4-ethylenedioxythiophene) (PEDOT) as anodes and a cathode, respectively. PbCmB/PEDOT ECD displayed gainsboro, dark gray, and bright slate gray colors at −0.4 V, 1.0 V, and 2.0 V, respectively. The P(bCmB-co-bTP)/PEDOT ECD showed a high ∆T (40.7% at 635 nm) and a high coloration efficiency (η = 428.4 cm²∙C⁻¹ at 635 nm). The polycarbazole/PEDOT ECDs exhibited moderate open circuit memories and electrochemical redox stability. The characterized electrochromic properties depicted that the as-prepared polycarbazoles had a satisfactory application prospect as an electrode for the ECDs.

Electrosynthesis of Electrochromic Polymer Membranes Based on 3,6-Di(2-thienyl)carbazole and Thiophene Derivatives

Five carbazole-containing polymeric membranes (PDTC, P(DTC-co-BTP), P(DTC-co-BTP2), P(DTC-co-TF), and P(DTC-co-TF2)) were electrodeposited on transparent conductive electrodes. P(DTC-co-BTP2) shows a high ΔT (68.4%) at 855 nm. The multichromic properties of P(DTC-co-TF2) membrane range between dark yellow, yellowish-green, gunmetal gray, and dark gray in various reduced and oxidized states. Polymer-based organic electrochromic devices are assembled using 2,2'-bithiophene- and 2-(2-thienyl)furan-based copolymers as anodic membranes, and poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonic acid) (PEDOT-PSS) as the cathodic membrane. P(DTC-co-TF)/PEDOT-PSS electrochromic device (ECD) displays a high transmittance change (ΔT%) (43.4%) at 627 nm as well as a rapid switching time (less than 0.6 s) from a colored to a bleached state. Moreover, P(DTC-co-TF2)/PEDOT-PSS ECD shows satisfactory optical memory (the transmittance change is less than 2.9% in the colored state) and high coloration efficiency (512.6 cm2 C-1) at 627 nm.

Synthesis and Characterization of Novel D-A Type Neutral Blue Electrochromic Polymers Containing Pyrrole[3-c]Pyrrole-1,4-Diketone as the Acceptor Units and the Aromatics Donor Units with Different Planar Structures

Three soluble conjugated polymers, named BEDPP, FLDPP, and CADPP, were prepared through the Suzuki polymerized reaction, and employed benzene (BE), fluorene (FL), and carbazole (CA) as the donor units, respectively. The electron-deficient molecule 2,5-bis-(2-octyldodecyl)-3,6-bis-(5-bromo-thiophene)-pyrrole[3-c]pyrrole-1,4-diketone(DPP)was introduced and used as the acceptor unit. The properties of these three copolymers were studied by a series of detailed characterization analysis, including X-ray photoelectron spectroscopy (XPS), colorimetry, electrochemical measurements, spectroelectrochemistry, kinetics, quantitative calculation, and thermogravimetric (TG) analysis, etc. The results revealed that BEDPP displayed a blue color in the neutral state and a light brown color in the oxidized state, FLDPP exhibited a cyan color in the neutral state and a gray color in the oxidized state, while CADPP displayed pure blue color in the neutral state and a light gray color in the oxidized state. All these polymers possess narrow optical band gaps lower than 1.80 eV and satisfactory thermal stability. The kinetic characterization showed that the optical contrasts (ΔT%) in the near-infrared region were superior to the visible region. The optical contrasts of BEDPP, FLDPP, and CADPP are 41.32%, 42.39%, and 45.95% in the near-infrared region, respectively, which made them a good application prospect in the near-infrared region. Amid the three polymers, CADPP has the highest coloration efficiency (around about 288 cm2·C-1) and fast switching times (0.77 s in the coloring process and 0.52 s in the bleaching process) in the visible region, and the comprehensive performance of CADPP can be comparable to that of the reported D-A (Donor-Acceptor) type blue color polymers. In general, based on the good performances and the stable neutral blue color, the three polymers had profound theoretical significance for the development of electrochromic material and the completion of the RGB (Red, Green, Blue) color space.