Renewable biomass derived porous BCN nanosheets and their adsorption and photocatalytic activities for the decontamination of organic pollutants

In-Situ Synergistic 2D/2D MXene/BCN Heterostructure for Superlative Energy Density Supercapacitor with Super-Long Life

The 2D/2D layered materials are gaining much-needed attention owing to the unprecedented results in supercapacitors by their robust structural and electrochemical compatibility. Here, a facile scalable synthesis of 2D/2D MXene/boron carbon nitride (BCN) heterostructure through no residue direct pyrolysis is reported. The process allows the in-situ growth of BCN nanosheets unravelling the surfaces of MXene synergistically that provide an interconnected conductive network with wide potential window, augmented proportion of Ti sites at elevated temperature removing terminal groups enabling high pseudocapacitive activity and impressive stability. As a result, the as-assembled MXene/BCN electrode records a high specific capacitance of 1173 F g^-1 (1876 C g^-1 ) at 2 A g^-1 and an energy density of 45 Wh kg^-1 . Further, the fabricated solid-state device exhibits an ultra-high cyclability of 100% capacitive retention after 100 000 cycles. This will be an epitome for future 2D/2D heterostructures with commendable electrochemical properties as an expedient solution for energy storage applications.

In Situ Growing BCN Nanotubes on Carbon Fibers for Novel High-Temperature Supercapacitor with Excellent Cycling Performance

Carbon nanomaterials have elicited much research interest in the energy storage field, but most of them cannot be used at high temperatures. Thus, a supercapacitor with high energy and desired stability at high temperatures is urgently required. Herein, BCN nanotubes (BCNNTs) with excellent performance at high temperatures are generated on carbon fibers by optimizing the ratio of B and N. The nanotubes' morphology can effectively alleviate the structural damage caused by the rapid adsorption/desorption of the electrolyte during long-time charge/discharge cycles at high temperatures, thus improving the high-temperature cycle stability. The symmetric supercapacitors that are assembled with the binder-free BCNNT electrode in 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIM·BF₄ ) exhibited a high areal capacitance of 177.1 mF cm^-2 at a current density of 5 mA cm^-2 , and capacitance retention is maintained up to 86.1% for 5000 cycles at 100 °C. Moreover, the flexible supercapacitor based on BCNNTs in poly(vinylidenefluoride hexafluoropropylene)/EMIM·BF₄ /succinonitrile gel electrolyte also exhibits good volumetric capacitance (1.98 mWh cm^-3 at a current density of 5 mA cm^-2 ) and cycling stability (92.6% retention after 200 charge/discharge cycles) at a temperature of 100 °C. This work shows that binder-free BCNNTs are promising materials for high-temperature flexible energy storage devices.

Molten salt synthesis of carbon-doped boron nitride nanosheets with enhanced adsorption performance

Owing to their large specific areas, high thermal stability and chemical inertness, two-dimensional boron carbon nitride nanosheets (BCNNs) have captured much attention in recent years in the field of adsorption of pollutants. The formation of BCNNs via incorporating carbon into boron nitride (BN) can effectively improve the photoelectric and adsorption properties of the latter. In this work, carbon-doped BN (BCN) nanosheets were prepared at 1100 °C via a molten salt route using boric acid, melamine and glucose as the main starting materials. The effects of molten salt type and carbon doping level on the formation of BCN were investigated, and their isothermal adsorption properties in a methylene blue (MB) aqueous solution were evaluated based on the Langmuir and Freundlich models. The results indicated that using molten LiCl-KCl as a liquid medium was more favorable than NaCl-KCl to the formation of BCNNs. As-prepared BC_0.4N sample possessed a sheet-like structure of about 10 nm thick and a specific surface area as high as 484 m² g^-1. Moreover, the adsorption test of MB demonstrated a high adsorption capacity of 249.04 mg g^-1, which was about 14 times higher than that in the case of the pristine BN, and the kinetic rate constant value in the case of using BC_0.4N is about ten times as high as that of BN following a pseudo-second-order model, suggesting that the as-formed BC_0.4N nanosheets could be potentially used as a value-added effective adsorbent for future wastewater remediation.

Multifunctional Edge-Activated Carbon Nitride Nanosheet-Wrapped Polydimethylsiloxane Sponge Skeleton for Selective Oil Absorption and Photocatalysis

Developing green 3D porous materials integrating multitasking environmental remediation with high efficiency and reusability is considered to be a promising sustainable approach and is urgently required. Herein, we have successfully prepared a facile, ecofriendly, and robust multifunctional composite sponge of carbon nitride (CN) nanosheets wrapping an elastomer polydimethylsiloxane (PDMS) skeleton without harsh treatments. The composite sponge (CN@PDMS) exhibits excellent hydrophobic and superoleophilic properties with a water contact angle of 133.2°. This sponge also shows high selective absorption of organic solvents and oils with high recyclability after 10 absorption cycles. Furthermore, the CN@PDMS sponge has a high ability for demulsification of the oil-in-water emulsion as well. The as-prepared sponge displays high thermal stability, retaining 82.16% of its original weight up to 550 °C, and extraordinary prolonged stability in harsh corrosive solutions over 35 h compared with the pristine PDMS sponge. Additionally, the CN@PDMS sponge exhibits a high ability for adsorption and photodegradation of rhodamine B under visible light irradiation with self-cleaning and high reusability over 5 runs. Such a sustainable strategy would provide new ways for broad environmental applications.

Improved photoremoval performance of boron carbon nitride–pyromellitic dianhydride composite toward tetracycline and Cr(vi) by itself to change the solution pH

A series of boron carbon nitride–pyromellitic dianhydride (BCNPA) composites were successfully synthesized for the first time, where BCNPA3 exhibited the best adsorption and photodegradation performances for tetracycline (TC) under visible-light irradiation.