Electrospun metal and metal alloy decorated TiO2 nanofiber photocatalysts for hydrogen generation

Recent Developments of Electrospinning-Based Photocatalysts in Degradation of Organic Pollutants: Principles and Strategies

Electrospinning is a simple and cheap process for forming one-dimensional (1D) nanofibers with controllable size, morphology, and chemistry. Besides these, the ultrahigh surface area with industrialization capability has attracted extensive interest in the research community. On the other hand, a photocatalytic process is a promising method for degrading organic pollutants that cannot be removed by conventional wastewater treatment. This review focuses on the recent progress of electrospun nanofibers for the photocatalytic degradation of water pollutants. The linkage between the electrospinning technique and the photocatalytic process is classified into two main categories: (1) polymeric electrospun nanofibers as a sacrificed template to form 1D photocatalysts and (2) polymeric electrospun nanofibers as a carrier of photocatalyst materials. We have thoroughly discussed the principles and fundamental issues of electrospinning as well as two main strategies to design and fabricate nanofiber-based photocatalysts for the ideal photodegradation of organics pollutants. The results of data mapping using VOSviewer demonstrated the recent trend and the importance of this field among researchers and engineers. Moreover, we have elaborated on the limitations and potential benefits of the two categories of electrospinning-based photocatalyst fabrication and practical application that will open new directions for future research.

Electrospun composite nanofibers as novel high-performance and visible-light photocatalysts for removal of environmental pollutants: A review

Environmental pollution caused by industries and human manipulations is coming a serious global challenge. On the other hand, the world is facing an energy crisis caused by population growth. Designing solar-driven photocatalysts which are inspired by the photosynthesis of plant leaves is a fantastic solution to use solar energy as green, available, and unlimited energy containing ∼50% visible light for the removal of environmental pollutants. The polymeric and non-polymeric-based electrospun composite nanofibers (NFs) are as innovative photocatalytic candidates which increase photocatalytic activity and transition from UV light to visible light and overcome the aggregation, photocorrosion, toxicity, and hard recycling and separation of the nanosized powder form of photocatalysts. The composite NFs are fabricated easily by either embedding the photocatalytic agents into the NFs during electrospinning or via their decorating on the surface of NFs post-electrospinning. Polyacrylonitrile-based, tungsten trioxide-based, zinc oxide-based, and titanium dioxide-based composite NFs were revealed as the most reported composite NFs. All the lately investigated electrospun composite NFs indicated long-term stability, high photocatalytic efficiency (∼> 80%) within a short time of light radiation (10-430 min), and high stability after several cycles of use. They were applied in various applications including degradation of dyes/antibiotics, water splitting, wastewater treatment, antibacterial usage, etc. The photogenerated species especially holes, O₂^∙-, and ^.OH were mostly responsible for the photocatalytic mechanism and pathway. The electrospun composite NFs have the potential to use in large-scale productions in condition that their thickness and recycling conditions are optimized, and their toxicity and detaching are resolved.

Novel adsorptive PVC nanofibrous/thiol-functionalized TNT composite UF membranes for effective dynamic removal of heavy metal ions

The development of efficient strategies for the removal of heavy metal ions from aqueous solutions is rapidly demanded as these contaminants are very toxic and carcinogenic and show detrimental effects on the living creatures. The main focus of the current study is on the preparation and assessment of electrospun adsorptive nanofiber membranes for the removal of toxic Ni(II) and Cu(II) from wastewater in the ultrafiltration process. Hydrothermally synthesized titanate nanotubes (TNT) was modified with thiol functional groups and then directly incorporated to the polyvinyl chloride nanofiber matrices via electrospinning process to fabricate an adsorptive membrane. The as-prepared electrospun nanofiber membranes and the nanoadsorbents were characterized with respect to the physiochemical properties, surface structure and morphology, applying XPS, FTIR, FESEM, EDX and TEM analysis and then, the membranes were evaluated in terms of the removal of the heavy metal ions in a continuous ultrafiltration mode. In adsorptive filtration of the metal ions, the effective factors including nanoadsorbents loading (0.5-1.5 wt%), initial metal ion concentration (60-150 mg/L), feed temperature (~25 °C-45 °C), presence of competing ion and reusability were investigated in the UF system where the membranes containing 1.5 wt% thiol-modified TNT and virgin TNT adsorbents demonstrated excellent removal efficiency compared to the other membranes. The Cu(II) and Ni(II) removal efficiency of the membrane containing 1.5 wt% functionalized TNT was 90% and 86.7%, respectively which was the highest ones. As was expected and due to the uniform dispersion and less aggregation of the modified TNT adsorbents on the large surface area of the electrospun nanofibers, more adsorption capacity of the nanoparticles can be exploited. Moreover, the strong affinity of the thiol functional groups toward the metal cations, these membranes removed metal contaminants more efficiently. Besides, the Cu(II) removal efficiency of the fabricated membranes didn't show any drastic changes in the presence of the competing ions. Furthermore, acceptable performance was achieved for the prepared membranes even after four adsorption/regeneration cycles in the continuous UF experiments, demonstrating the feasibility and effectiveness of the prepared adsorptive nanofiber membranes for the removal of heavy metal ions.

Gold-decorated TiO2 nanofibrous hybrid for improved solar-driven photocatalytic pollutant degradation

TiO₂-based nanomaterials are among the most promising photocatalysts for degrading organic dye pollutants. In this work, Au-TiO₂ nanofibers were fabricated by the electrospinning technique, followed by calcination in air at 500 °C. Morphological and structural analyses revealed that the composite consists of TiO₂ nanofibers with embedded Au nanoparticles that are extensively distributed throughout the porous fibrous structure of TiO₂. The photocatalytic performance of these Au-embedded TiO₂ nanofibers was evaluated in the photodegradation of Rhodamine B and methylene blue under solar simulator irradiation. Compared with pristine TiO₂ nanofibers, the Au-embedded TiO₂ nanofibers displayed far better photocatalytic degradation efficiency. The plasmon resonance absorption of Au nanoparticles in the visible spectral region and the effective charge separation at the heterojunction of the Au-TiO₂ hybrid are the key factors that have led to the considerable enhancement of the photocatalytic activity. The results of this study clearly demonstrate the potential of Au-TiO₂ electrospun nanofibers as solar-light-responsive photocatalysts for the effective removal of dye contaminants from aquatic environments.

Nanofibrous TiO2 produced using alternating field electrospinning of titanium alkoxide precursors: crystallization and phase development

High-yield, free-surface alternating field electrospinning (AFES) was effectively used in the fabrication of titanium oxide nanofibrous materials from the precursors based on titanium alkoxide and a blend of polyvinylpyrrolidone and hydroxypropyl cellulose. The alkoxide/polymer mass ratio in the precursor solution has significant effects on the precursor fiber production rate as well as the structure of resulting TiO₂ nanofibers after thermal processing of precursor fibers at temperatures from 500 to 1000 °C. Within the range of tested process parameters, the best fiber production rate of ∼5.2 g h⁻¹ was achieved, in terms of the mass of crystallized TiO₂ nanofibers, with the precursor that corresponded to 1.5 : 1 TiO₂/polymer mass ratio. TiO₂ nanofibers produced by calcination at 500 °C for 3 h had 100–500 nm diameters and were composed of anatase (20–25 nm crystallite size) with rutile content 0.1–6.0 mol%, depending on the precursor composition. A considerable amount of anatase phase (up to 80 mol%) can be retained after thermal processing of TiO₂ nanofibers at 750 °C for 3 h. A nanofibrous material composed of smooth and long, predominantly monocrystalline rutile, fibrous segments was produced at 1000 °C from the precursor with 2.5 : 1 TiO₂/polymer mass ratio.

An uncommon alternating field electrospinning of titanium alkoxide/polyvinylpyrrolidone/hydroxypropyl cellulose precursors leads to high-yield synthesis of TiO₂ nanofibers with controllable microstructure and phase composition.

Enhanced visible light photocatalysis by TiO2-BN enabled electrospinning of nanofibers for pharmaceutical degradation and wastewater treatment

Boron nitride (BN) nanosheets are promising support materials for catalysts. A series of TiO₂-BN enabled electrospun nanofibers were synthesized for the photocatalytic treatment of ibuprofen and secondary wastewater effluent under visible light. X-ray photoelectron spectroscopy confirmed the existence of B-O-Ti bonds between the BN nanosheets and TiO₂ nanofibers, resulting in energy rearrangement, narrowed band gaps, and enhanced light utilization efficiency of the TiO₂-BN nanocomposites in the visible light spectrum. Transient photocurrent measurements revealed that the BN enhanced the transport of photogenerated holes from the bulk TiO₂ nanofibers to its surface, resulting in more efficient separation and less recombination of the charge carriers. A kinetic study of ibuprofen degradation indicated the enhanced photocatalytic performance of TiO₂-BN catalysts with a higher BN content in the nanocomposites. The kinetic rate constant of the TiO₂-10% BN catalysts was 10 times higher than that of the pure TiO₂ nanofibers. The degradation of organic contaminants in wastewater followed the same trend as ibuprofen and improved with increasing BN content. The stability of the TiO₂-BN nanocomposites as an effective solar photocatalyst was demonstrated by multiple cycles of wastewater treatment. The results proved that TiO₂-BN is an appealing photocatalyst under visible light.

Moisture-Resistant Electrospun Polymer Membranes for Efficient and Stable Fully Printable Perovskite Solar Cells Prepared in Humid Air

Fully printable perovskite solar cells (PPSCs) attract attention in the photovoltaic industry and research owing to their controllable and scalable production with reduced material waste during manufacturing. However, the commercialization of PPSCs has been impeded by their inherent vulnerability to ambient moisture, leading to a rapid loss of device efficiency and lifetime. Here, we propose a novel idea to enhance the photovoltaic performance and stability of PPSCs in humid air (relative humidity exceeding 80%) using electrospun hydrophobic polymer membranes, i.e., polylactic acid (PLA), polycaprolactone (PCL), and PLA/PCL blends, as moisture-resistant layers for PPSCs. After optimizing the morphologies, hydrophobicity, and thermal properties of the electrospun membranes by varying the contents of the polymer components in the membranes, the unencapsulated devices with these membranes demonstrated power conversion efficiencies of up to 8.2%, which was significantly higher than for devices without the membranes (6.8%). Moreover, devices with the optimum electrospun membrane retained more than 85% of their original efficiency after being stored in humid air for over 35 days. In comparison, devices without the electrospun membranes lost about 50% of their initial efficiency over the same time. Our work is very useful for the development of highly efficient and stable commercial PPSCs.

Electrospinning Fabricating Au/TiO2 Network-like Nanofibers as Visible Light Activated Photocatalyst

Exploiting photocatalysts with characteristics of low cost, high reactivity and easy recovery offer great potentials for complete elimination of toxic chemicals and environmental remediation. In this work, Au/TiO2 network-like nanofibers were fabricated using a facile electrospinning technique followed by calcinations in air. Photocatalytic tests indicate that the Au/TiO2 network-like nanofibers possess an excellent photodegradation rate of rhodamine B (RB) under UV, visible and natural light radiation. The enhanced photocatalytic activity can be attributed to the plasmonic resonance absorption of Au nanoparticles, and photogenerated electrons and holes are effectively separated by the Au/TiO2 heterojunction structures. Furthermore, the three-dimensional network structure can provide a large number of active sites for RB degradation.