Enhanced photocatalytic activity and ultra-sensitive benzaldehyde sensing performance of a SnO2·ZnO·TiO2 nanomaterial

Detection and treatment of mono and polycyclic aromatic hydrocarbon pollutants in aqueous environments based on electrochemical technology: recent advances

Mono and polycyclic aromatic hydrocarbons are widely distributed and severely pollute the aqueous environment due to natural and human activities, particularly human activity. It is crucial to identify and address them in order to reduce the dangers and threats they pose to biological processes and ecosystems. In the fields of sensor detection and water treatment, electrochemistry plays a crucial role as a trustworthy and environmentally friendly technology. In order to accomplish trace detection while enhancing detection accuracy and precision, researchers have created and studied sensors using a range of materials based on electrochemical processes, and their results have demonstrated good performance. One cannot overlook the challenges associated with treating aromatic pollutants, including mono and polycyclic. Much work has been done and good progress has been achieved in order to address these challenges. This study discusses the mono and polycyclic aromatic hydrocarbon sensor detection and electrochemical treatment technologies for contaminants in the aqueous environment. Additionally mentioned are the sources, distribution, risks, hazards, and problems in the removal of pollutants. The obstacles to be overcome and the future development plans of the field are then suggested by summarizing and assessing the research findings of the researchers.

A Sensitive Hydroquinone Amperometric Sensor Based on a Novel Palladium Nanoparticle/Porous Silicon/Polypyrrole-Carbon Black Nanocomposite

Exposure to hydroquinone (HQ) can cause various health hazards and negative impacts on the environment. Therefore, we developed an efficient electrochemical sensor to detect and quantify HQ based on palladium nanoparticles deposited in a porous silicon-polypyrrole-carbon black nanocomposite (Pd@PSi-PPy-C)-fabricated glassy carbon electrode. The structural and morphological characteristics of the newly fabricated Pd@PSi-PPy-C nanocomposite were investigated utilizing FESEM, TEM, EDS, XPS, XRD, and FTIR spectroscopy. The exceptionally higher sensitivity of 3.0156 μAμM^-1 cm^-2 and a low limit of detection (LOD) of 0.074 μM were achieved for this innovative electrochemical HQ sensor. Applying this novel modified electrode, we could detect wide-ranging HQ (1-450 μM) in neutral pH media. This newly fabricated HQ sensor showed satisfactory outcomes during the real sample investigations. During the analytical investigation, the Pd@PSi-PPy-C/GCE sensor demonstrated excellent reproducibility, repeatability, and stability. Hence, this work can be an effective method in developing a sensitive electrochemical sensor to detect harmful phenol derivatives for the green environment.

Fabrication of r-GO/GO/α-Fe2O3/Fe2TiO5 Nanocomposite Using Natural Ilmenite and Graphite for Efficient Photocatalysis in Visible Light

Hematite (α-Fe₂O₃) and pseudobrookite (Fe₂TiO₅) suffer from poor charge transport and a high recombination effect under visible light irradiation. This study investigates the design and production of a 2D graphene-like r-GO/GO coupled α-Fe₂O₃/Fe₂TiO₅ heterojunction composite with better charge separation. It uses a simple sonochemical and hydrothermal approach followed by L-ascorbic acid chemical reduction pathway. The advantageous band offset of the α-Fe₂O₃/Fe₂TiO₅ (TF) nanocomposite between α-Fe₂O₃ and Fe₂TiO₅ forms a Type-II heterojunction at the Fe₂O₃/Fe₂TiO₅ interface, which efficiently promotes electron-hole separation. Importantly, very corrosive acid leachate resulting from the hydrochloric acid leaching of ilmenite sand, was successfully exploited to fabricate α-Fe₂O₃/Fe₂TiO₅ heterojunction. In this paper, a straightforward synthesis strategy was employed to create 2D graphene-like reduced graphene oxide (r-GO) from Ceylon graphite. The two-step process comprises oxidation of graphite to graphene oxide (GO) using the improved Hummer's method, followed by controlled reduction of GO to r-GO using L-ascorbic acid. Before the reduction of GO to the r-GO, the surface of TF heterojunction was coupled with GO and was allowed for the controlled L-ascorbic acid reduction to yield r-GO/GO/α-Fe₂O₃/Fe₂TiO₅ nanocomposite. Under visible light illumination, the photocatalytic performance of the 30% GO/TF loaded composite material greatly improved (1240 Wcm^-2). Field emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy (HR-TEM) examined the morphological characteristics of fabricated composites. X-ray photoelectron spectroscopy (XPS), Raman, X-ray diffraction (XRD), X-ray fluorescence (XRF), and diffuse reflectance spectroscopy (DRS) served to analyze the structural features of the produced composites.

Development of a Toxic Lead Ionic Sensor Using Carboxyl-Functionalized MWCNTs in Real Water Sample Analyses

Functional multiwall carbon nanotubes (f-MWCNTs) are of significant interest due to their dispersion ability in the aqueous phase and potential application in environmental, nanotechnology, and biological fields. Herein, we functionalized MWCNTs by a simple acid treatment under ultra-sonification, which represented a terminal or side-functional improvement for the fabrication of a toxic lead ion sensor. The f-MWCNTs were characterized in detail by XRD, Raman, XPS, BET, UV/vis, FTIR, and FESEM-coupled XEDS techniques. The analytical performance of the f-MWCNTs was studied for the selective detection of toxic lead ions by inductively coupled plasma-optical emission spectrometry (ICP-OES). The selectivity of the f-MWCNTs was evaluated using several metal ions such as Cd²⁺, Co²⁺, Cr³⁺, Cu²⁺, Fe³⁺, Ni²⁺, Pb²⁺, and Zn²⁺ ions. Lastly, the newly designed ionic sensor was successfully employed to selectively detect lead ions in several environmental water samples with reasonable results. This approach introduced a new technique for the selective detection of heavy metal ions using functional carbon nanotubes with ICP-OES for the safety of environmental and healthcare fields on a broad scale.

Nanomolar detection of food additive tert-butylhydroquinone in edible oils based on novel ternary metal oxide embedded β-cyclodextrin functionalized carbon black

It is pivotal to precisely detect food preservatives to ascertain food quality and safety. In this work, we report the sensitive electrochemical detection of widely used cytotoxic food preservative tert-butylhydroquinone (TBHQ). A novel nanocomposite was sonochemically prepared by embedding ternary metal oxide (TMO) comprising ZnO, CuO, and MgO in β-cyclodextrin (β-CD) functionalized carbon black (CB). The properties of the prepared nanocomposite were evaluated by employing multiple characterization methods. The nanocomposite fabricated on a screen printed carbon electrode exhibited exceptional electrocatalytic activity towards TBHQ detection, evident from the resultant very low detection limit of 1 nM and high sensitivity of 22.67 μA μM^-1 cm^-2. Moreover, the developed TBHQ sensor evinced all the important traits of a good electrochemical sensor including excellent selectivity, stability, reproducibility, and repeatability. Furthermore, for validating practical feasibility of TBHQ detection, we successfully determined this food additive in edible oils.

Diverse biotechnological applications of multifunctional titanium dioxide nanoparticles: An up-to-date review

Titanium dioxide (TiO₂) nanoparticles (NPs) are one of the topmost widely used metallic oxide nanoparticles. Whether present in naked form or doped with metals or polymers, TiO₂ NPs perform immensely important functions. However, the alteration in size and shape by doping results in improving the physical, chemical, and biological behaviour of TiO₂ NPs. Hence, the differential effects of various TiO₂ nanostructures including nanoflakes, nanoflowers, and nanotubes in various domains of biotechnology have been elucidated by researchers. Recently, the exponential growth of research activities regarding TiO₂ NPs has been observed owing to their chemical stability, low toxicity, and multifaceted properties. Because of their enormous abundance, plants, humans, and environment are inevitably exposed to TiO₂ NPs. These NPs play a significant role in improving agricultural attributes, removing environmental pollution, and upgrading the domain of nanomedicine. Therefore, the currently ongoing studies about the employment of TiO₂ NPs in enhancement of different aspects of agriculture, environment, and medicine have been extensively discussed in this review.

Facile and Green Fabrication of Microwave-Assisted Reduced Graphene Oxide/Titanium Dioxide Nanocomposites as Photocatalysts for Rhodamine 6G Degradation

Organic pollutants, such as synthetic dyes, are treated to prevent them from contaminating natural water sources. One of the treatment methods is advanced oxidation process using a photocatalyst material as the active agent. However, many photocatalysts are hindered by their production cost and efficiency. In this study, nanocomposites consisting of reduced graphene oxide and titanium dioxide (rGO/TiO2) were prepared by a simple and green approach using the microwave-assisted method, and we utilized a graphene oxide (GO) precursor that was fabricated through the Tour method. The ratios of rGO/TiO2 in nanocomposites were varied (2:1, 1:1, and 1:2) to know the influence of rGO on the photocatalytic performance of the nanocomposites for rhodamine 6G degradation. Transmission electron microscopy (TEM) observation revealed that a transparent particle with a sheetlike morphology was detected in the rGO sample, suggesting that a very thin film of a few layers of GO or rGO was successfully formed. Based on scanning electron microscopy (SEM) observation, the rGO/TiO2 nanocomposites had a wrinkled and layered rGO structure decorated by TiO2 nanoparticles with average diameters of 125.9 ± 40.6 nm, implying that rGO layers are able to prevent TiO2 from agglomeration. The synthesized product contained only rGO and TiO2 in the anatase form without impurities that were proven by Raman spectra and X-ray diffraction (XRD). The nanocomposite with rGO/TiO2 ratio 1:2 (composite C) was found to be the best composition in this study, and it was able to degrade 82.9 ± 2.4% of the rhodamine 6G after UV irradiation for 4 h. Based on a time-resolved photoluminescence study at wavelength emission 500 nm, the average decay lifetime of R6G-rGO/TiO2 composites (2.91 ns) was found to be longer than that of the R6G-TiO2 sample (2.05 ns), implying that the presence of rGO in rGO/TiO2 composites successfully suppressed the electron-hole recombination process in TiO2 and significantly improved their photocatalytic performance. This study showed that the rGO/TiO2 nanocomposites synthesized through relatively simple and eco-friendly processes display promising prospects for photocatalytic degradation of dyes and other recalcitrant pollutants in a water stream.

Fabrication of Novel and Potential Selective 4-Cyanophenol Chemical Sensor Probe Based on Cu-Doped Gd2O3 Nanofiber Materials Modified PEDOT:PSS Polymer Mixtures with Au/µ-Chip for Effective Monitoring of Environmental Contaminants from Various Water Samples

Herein, a novel copper-doped gadolinium oxide (Cu-doped Gd2O3; CGO) nanofiber was synthesized by a simple solution method in the basic phase and successfully characterized. We have used Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Field Emission Scanning Electron Microscope (FESEM) and Energy-Dispersive Spectroscopy (EDS) techniques for characterization of the CGO nanofiber. The CGO nanofiber was used later to modify Au-coated μ-Chips with poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) polymer mixtures (coating binder) to selectively detect 4-cyanophenol (4-CP) in an aqueous medium. Notable sensing performance was achieved with excellent sensitivity (2.4214 µAµM-1 cm-2), fast response time (~12 s), wide linear dynamic range (LDR = 1.0 nM-1.0 mM: R2 = 0.9992), ultra-low detection limit (LoD; 1.3 ± 0.1 pM at S/N = 3), limit of quantification (LoQ; 4.33 pM), and excellent reproducibility and repeatability for CGO/Au/μ-Chip sensor. This CGO modified Au/μ-chip was further applied with appropriate quantification and determination results in real environmental sample analyses.

Sensitive and selective colorimetric detection of Cu (II) in water samples by thiazolylazopyrimidine-functionalized TiO2 nanoparticles

In this study, a new thiazolylazopyrimidine-functionalized TiO₂ nanosensor (TiO₂-TAP) has been developed for sensitive and selective colorimetric detection of Cu²⁺ in water samples. Thiazolylazopyrimidine (TAP) as an azo ligand and TiO₂-TAP as highly selective nanosensor were successfully prepared through the diazo coupling reaction and surface chemical modification, respectively. Characterization of TiO₂-TAP NPs using Fourier transmission infrared (FT-IR), field emission scanning electron microscopy (FESEM), energy dispersive X- ray spectroscopy (EDX), and X-ray diffraction (XRD) analysis revealed that the TiO₂ NPs were effectively modified with the synthesized epoxy-activated thiazolylazopyrimidine. The synthesized azo ligand containing azo chromophore (N=N) produce color and make a stable complex formation with Cu²⁺ based on charge-transfer transduction in the detection system. The color change of TiO₂-TAP solution from yellow to red occur directly after few seconds of addition of Cu²⁺ ions, as a result of surface complexation. The TiO₂-TAP has revealed high affinity, sensitivity and selectivity for copper ion over other competing metal ions in aqueous media. The experimental data revealed that the Cu²⁺ ions was sensed and adsorbed by the TiO₂-TAP at optimal pH 5.0. The results also confirmed that the TiO₂-TAP has a wide linear detection range for Cu²⁺ (0.01 to 12.5 μM). From UV-vis titration experiment, the limit of detection (LOD) for Cu²⁺ ions was found to be 2.51 nM. The proposed method was successfully applied for the sensitive and selective detection of Cu²⁺ in tap water, sea water and well water. In addition, Cu²⁺ recovery improved using the TiO₂-TAP containing N, S and O atoms as chelating sites. Therefore, the developed nanosensor with great features like the cost-effective, excellent sensitively and selectively, short response times and high adsorption efficiency for Cu²⁺ can be utilized in any physical and biological conditions.

Flow injection enzymatic biosensor for aldehydes based on a Meldola Blue-Ni complex electrochemical mediator

Carbon nanofibers (CNF) are efficient electrode modifiers in electrochemical biosensors that enhance the electrochemical active area, induce electrocatalytic effect toward the oxidation of the enzymatic cofactor nicotinamide adenine dinucleotide (reduced form, NADH), and enable the quantitative immobilization of enzymes. Combining CNF with efficient and stable mediators radically augments the speed of electron transfer between NADH and solid electrodes and leads to electrochemical sensors characterized by high sensitivity and stability. The main aim of this work was to investigate the performance of a novel mediator for NADH with advantageously low solubility in an electrochemical detector based on a screen-printed CNF electrode as well as its potential in biosensing. Using a mediator, prepared from Meldola Blue and Ni hexamine chloride, a stable and sensitive electrochemical NADH sensor is provided with a detection limit of 0.5 μmol L^-1. Further on, covalent immobilization of a recently described aldehyde dehydrogenase from the Antarctic Flavobacterium PL002 strain on the surface of the mediator-modified electrode produced a stable biosensor for the detection of aldehydes. When integrated in a flow injection analysis (FIA) setup with amperometric detection at 0.1 V vs. Ag/AgCl, the measurement of benzaldehyde with a detection limit of 10 μmol L^-1 over a linear range of 30-300 μmol L^-1 is possible. Determination of trace benzaldehyde impurities in a pharmaceutical excipient was also demonstrated and results compared with a chromatographic method. Graphical abstract.

Photocatalysis, photoinduced enhanced anti-bacterial functions and development of a selective m-tolyl hydrazine sensor based on mixed Ag·NiMn2O4 nanomaterials

In this work, a tri-metal based nanocomposite was synthesized and characterized. A detailed investigation of the photocatalytic dye degradation efficiency of the nanocomposite under visible light showed promising results in a wide pH range, both acidic and basic medium. Studies on anti-bacterial activity against seven pathogenic bacteria, including both Gram positive and Gram negative species, were conducted in the presence and absence of light and compared with the standard antibiotic gentamicin. The minimum inhibitory concentration (MIC) values of Ag·NiMn2O4 against multidrug-resistant (MDR) pathogens ranged from 0.008 to 0.65 μg μL-1, while the minimum bactericidal concentration (MBC) was found to be 0.0016 μg μL-1. The nanomaterial, Ag·NiMn2O4 was deposited onto the surface of a glassy carbon electrode (GCE; 0.0316 cm2) as a thin film to fabricate the chemical sensor probe. The proposed sensor showed linear current (vs. concentration) response to m-THyd (m-tolyl hydrazine) from 1.0 pM to 0.01 mM, which is denoted as the linear dynamic range (LDR). The estimated sensitivity and detection limit of the m-THyd sensor were found to be 47.275 μA μM-1 cm-2 and 0.97 ± 0.05 pM, respectively. As a potential sensor, it is reliable due to its good reproducibility, rapid response, higher sensitivity, working stability for long duration and efficiency in the analysis of real environmental samples.

Fabrication of an ultra-sensitive para-nitrophenol sensor based on facile Zn-doped Er2O3 nanocomposites via an electrochemical approach

In this study, a semiconductor-doped nanocomposite material (Zn-doped Er2O3 nano-composites) was prepared via a single-step wet-chemical technique at alkaline pH. Fourier-transform infrared spectroscopy (FT-IR), UV/Vis spectroscopy, photoluminescence spectroscopy (PL), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (XEDS), and X-ray powder diffractometry (XRD) were applied to determine the structural and morphological properties of the Zn-doped Er2O3 nanocomposite. A thin layer of aggregated Zn-doped Er2O3 nanocomposite was fabricated on the flat surface of a glassy carbon electrode (GCE) with 5% ethanolic Nafion as conducting coating binder for the development of a selective and sensitive p-nitrophenol (para-NP) capturing electrochemical probe for environmental remediation. After the fabrication of the sensor, a novel current-potential (I-V) electrochemical approach was applied to determine its selectivity and sensitivity together with all the necessary analytical parameters against para-NP. Moreover, the calibration plot was found to be linear with the linear dynamic range (LDR) of para-NP concentration. The limit of detection (LOD) at a signal-to-noise ratio of 3 (S/N ∼ 3) and sensitivity were also calculated to be 0.033 ± 0.002 pM and 28.481 × 10-2 μA μM-1 cm-2, respectively, based on the gradient of the calibration plot, and the limit of quantification (LOQ) was determined to be 0.11 ± 0.02 pM. This work demonstrates a well-known approach for the first time that can be used for the development of efficient electrochemical sensors. These sensors based on semiconductor doped nanomaterials embedded onto the GCE for the detection of toxic chemicals in an aqueous system as an environmental remediation. It can be further applied for the analysis of real environmental samples and in the healthcare field.

Efficient selective 4-aminophenol sensing and antibacterial activity of ternary Ag2O3·SnO2·Cr2O3 nanoparticles

The electrochemical oxidation of 4-AP based on Ag₂O₃·SnO₂·Cr₂O₃ NPs/binder/GCE sensor.