Adsorption of methylene blue and tetracycline onto biomass-based material prepared by sulfuric acid reflux

A review on sustainable management of biomass: physicochemical modification and its application for the removal of recalcitrant pollutants-challenges, opportunities, and future directions

Adsorption is one of the most efficient methods for remediating industrial recalcitrant wastewater due to its simple design and low investment cost. However, the conventional adsorbents used in adsorption have several limitations, including high cost, low removal rates, secondary waste generation, and low regeneration ability. Hence, the focus of the research has shifted to developing alternative low-cost green adsorbents from renewable resources such as biomass. In this regard, the recent progress in the modification of biomass-derived adsorbents, which are rich in cellulosic content, through a variety of techniques, including chemical, physical, and thermal processes, has been critically reviewed in this paper. In addition, the practical applications of raw and modified biomass-based adsorbents for the treatment of industrial wastewater are discussed extensively. In a nutshell, the adsorption mechanism, particularly for real wastewater, and the effects of various modifications on biomass-based adsorbents have yet to be thoroughly studied, despite the extensive research efforts devoted to their innovation. Therefore, this review provides insight into future research needed in wastewater treatment utilizing biomass-based adsorbents, as well as the possibility of commercializing biomass-based adsorbents into viable products.

Production of demineralised high quality hierarchical activated carbon from lignite and determination of adsorption performance using methylene blue and p-nitrophenol: The role of surface functionality, accessible pore size and surface area

In the adsorption process, the surface area, pore and particle size distribution and the chemical structure of the solid and the type of adsorbent are of vital importance. Activated carbon (AC) is a very good adsorbent material and its cost is highly dependent on the starting material and production method. The pore size and functional structure of the surface depend on the amount of activation chemical used. Hierarchical ACs were produced from lignite by loading two different amounts of KOH. The impregnation ratio (KOH/lignite) was chosen as 1/1 and 3/1 and the produced ACs were labelled as AC1 and AC3. The surface areas of AC1 and AC3 were determined as 1321.3 and 2421.3 m2/g, and the total pore volumes were 1.079 and 1.425 cm3/g. Methylene blue (MB) and p-nitrophenol (p-NP) were used to determine the adsorption performance of the produced ACs. The adsorption data were evaluated in terms of the Langmuir and Freundlich models. The amounts of MB and p-NP adsorbed on the surface were calculated in mg/g, total and accessible surface area in mg/m2. It was determined that the MB and p-NP adsorbed to the AC1 sample were higher than the AC3 sample per m2 of population. Molecular orientation is possible depending on the solid surface functionality and chemical structure of the molecule to be adsorbed. It was concluded that in addition to the large surface area, the pore width that can be entered and the functional structure of the surface are very significant factors in the adsorption processes.

Sodium ions removal by sulfuric acid-modified biochars

Sulfuric acid modifies the biochar derived from corn cobs, stalks, and reeds. Amongst the modified biochar, corn cobs-biochar has the highest BET (101.6 m2 g-1), followed by reeds-biochars (96.1 m2 g-1). The Na+ adsorption capacities for pristine biochars are corn cobs-pristine biochar: 24.2 mg g-1, corn stalks-pristine biochar: 7.6 mg g-1, and reeds-pristine biochar: 6.3 mg g-1, relatively low for field applications. The acid-modified corn cobs biochar has a superior Na+ adsorption capacity of up to 221.1 mg g-1, much higher than literature reports and the other two tested biochars. This corn cobs-modified biochar has also a satisfactory Na+ adsorption capacity (193.1 mg g-1) from actual water collected from a sodium-contaminated city, Daqing, China. The FT-IR spectroscopy and XPS spectrum reveal that the embedded surface -SO3H groups onto the biochar correlate with its superior Na + adsorption, attributable to the ion exchange mechanisms. The biochar surface accessible to sulfonic group grafting can generate a superior Na+ adsorbing surface, which is for the first time reported and has great application potential for the remediation of sodium-contaminated water.

Ba-modified peanut shell biochar (PSB): preparation and adsorption of Pb(II) from water

The impact of Ba-modified peanut shell biochar (Ba-PSB) on Pb(II) removal was studied and BaCl2 was used as a modifier. It was shown that the PSB obtained at 750 °C had the best adsorption effect, and the Ba-PSB had a larger specific surface area and a good adsorption effect on Pb(II). At pH = 5, concentration was 400 mg/L, time was 14 h, and temperature was 55 °C, the loading amount of black peanut shell biochar (BPSB), red peanut shell biochar (RPSB), Ba-BPSB, and Ba-RPSB reached 128.050, 98.217, 379.330, and 364.910 mg/g, respectively. In addition, based on the non-linear fitting, it was found that the quasi-second-order kinetic model, and isothermal model could be applied to describe Pb(II) adsorption on PSB and Ba-PSB. The adsorption behavior of PSB unmodified and modified was a spontaneous process. Moreover, chemical modification of BPSB, RPSB, Ba-BPSB, and Ba-RPSB for hindering of -COOH and -OH groups revealed 81.81, 77.08, 86.90, and 83.65% removal of Pb(II), respectively, which was due to the participation of -COOH, while 17.61, 21.70, 12.77, and 15.06% was from -OH group, respectively. The increase of cation strength (Na+, K+, Ca2+, and Mg2+) will reduce the adsorption capacity of PSB for Pb(II).

Preparation of ZIF-67/C3N4 composite material and adsorption of tetracycline hydrochloride

In recent years, wastewater treatment to remove tetracycline hydrochloride (TCH) has received much attention in water treatment problems. ZIF-67/C3N4 composite adsorbent, a nanosheet structured material stacked with MOFs, was prepared by in situ growth method, which has high adsorption activity for tetracycline hydrochloride in wastewater. Comparing the effect of monomeric and composite adsorbents, Z6C2 had the best adsorption effect (206 mg·g-1), which was 77.6% higher than that of ZIF-67 (116 mg·g-1) and 10.8 times higher than that of C3N4 (19 mg·g-1). The structure of ZIF-67 stacked on C3N4 nanosheets has an excellent specific surface area and number of active sites, as well as π-π interactions, electrostatic interactions, and hydrogen bonding interactions between the adsorbent and TCH, which combine to enhance the adsorption performance. The adsorption process is accompanied by a combination of chemisorption, mass transport, and internal diffusion rate-limiting. It was shown that the adsorption process is favorable for monolayer adsorption as well as a heat absorption reaction that proceeds spontaneously. The adsorbent exhibits good stability and adsorption capacity, which may be suitable for efficient and low-cost water purification.

One-step synthesis of garlic peel derived biochar by concentrated sulfuric acid: Enhanced adsorption capacities for Enrofloxacin and interfacial interaction mechanisms

This study put forward a one-step carbonization method by concentrated sulfuric acid to prepare garlic peel derived biochar, and the synthetic conditions were optimized by L₁₆(4⁵) orthogonal experiments. Notably, in order to study the differences between the proposed synthetic method and the conventional pyrolysis method, the concentrated sulfuric acid carbonized garlic peels biochar (CSGPB) was compared with pyrolysis derived garlic peel biochar (HTGPB) in characterization and adsorption capacities for Enrofloxacin (ENR). Results showed that CSGPB exhibited more graphite-like structures with more active functional groups on the surface, and the equilibrium adsorption capacity of CSGPB (142.3 mg g^-1) was 13.7 times of HTGPB (10.4 mg g^-1) under identical conditions. Moreover, the adsorption behaviors including adsorption kinetics, isotherms and thermodynamics of CSGPB for ENR were fully investigated and discussed. Based on the above experiments, density functional theory (DFT) simulations were performed to reveal the interfacial interaction and adsorption mechanism. Results showed π-π interaction between quinolone moieties of ENR and graphite-like structures in CSGPB might be the dominant mechanism. As for the functional groups, the adsorption energies were -40.46, -15.21 and -5.96 kJ mol^-1 for -SO₃H, -OH and -COOH, respectively, which indicated -SO₃H was the most active functional groups on the surface of CSGPB. This study provided a new sustainable perspective for the design of efficient biochars, and explored the interfacial interaction mechanism of antibiotics removal on biochars.

Continuous photocatalytic set-up assisted with nano TiO2 plate for tannery wastewater treatment

A novel photocatalytic continuous system has been proposed for the treatment of tannery waste water, which has high levels of environmental pollutants. The purification process was performed by passing wastewater on a titanium dioxide (TiO₂)-coated surface, which is continuously activated by irradiation of ultraviolet light. To improve the yield of the process, ferric chloride (FeCl₃) was used as a coagulation agent. The organic and inorganic compounds, as well as the microorganisms in the tannery wastewater media, were degraded through a photocatalytic process. The results revealed that total dissolved solids and total suspended solids contents were significantly decreased from 8,450 and 8,990 mg·L^-1 to 4,032 and 4,127 mg·L^-1, respectively. Furthermore, the chemical oxygen demand content of the sample was reduced from 370 to 50 mg·L^-1 after the addition of 100 mL of FeCl₃ and 4 h of treatment. The same results were observed for the elimination of sulfate and chromium ions, which led to a decline in electrical conductivity. This suggests that introducing 100 mL of FeCl₃ as the coagulation agent and continuous treatment with photocatalityc set-up could be considered as an effective method for the purification of tannery wastewaters.

Perspectives on the antibiotic contamination, resistance, metabolomics, and systemic remediation

Antibiotics have been regarded as the emerging contaminants because of their massive use in humans and veterinary medicines and their persistence in the environment. The global concern of antibiotic contamination to different environmental matrices and the emergence of antibiotic resistance has posed a severe impact on the environment. Different mass-spectrometry-based techniques confirm their presence in the environment. Antibiotics are released into the environment through the wastewater steams and runoff from land application of manure. The microorganisms get exposed to the antibiotics resulting in the development of antimicrobial resistance. Consistent release of the antibiotics, even in trace amount into the soil and water ecosystem, is the major concern because the antibiotics can lead to multi-resistance in bacteria which can cause hazardous effects on agriculture, aquaculture, human, and livestock. A better understanding of the correlation between the antibiotic use and occurrence of antibiotic resistance can help in the development of policies to promote the judicious use of antibiotics. The present review puts a light on the remediation, transportation, uptake, and antibiotic resistance in the environment along with a novel approach of creating a database for systemic remediation, and metabolomics for the cleaner and safer environment.

Production of modified sunflowers seed shells for the removal of bisphenol A

In this present study, an abundant, available lignocellulosic biomass, sunflower seed shells, SSS, was used as a precursor to prepare an effective eco-adsorbent by treatment with H2SO4. A study of the surface characteristics of raw and acid-treated SSS (ACS) has shown that the addition of H2SO4 greatly affected the physicochemical properties of the obtained eco-adsorbent, improving the BET surface area from 6.106 to 27.145 m2 g-1 and surface oxygen-rich functional groups. Batch experiments were performed to assess the removal efficiency of a phenolic compound, bisphenol A (BPA), on the adsorbents. Several parameters were evaluated and are discussed (contact time, pollutant concentration, adsorbent dosage, and pH), determining that the adsorption efficiency of BPA onto SSS was notably improved, from 20.56% to 87.81% when a sulfuric acid solution was used. Different canonical and stochastic isotherm models were evaluated to predict the experimental behaviour. A dynamic study was performed based on the models of reaction kinetics and those of mass transfer. The results showed that the adsorption kinetics of BPA obey the fractal like-kinetic model of Hill for all experimental conditions. The equilibrium data are well suited to the Hill-Sips isotherm model with a determination coefficient >0.999. The kinetic modelling also indicates that the adsorption processes of BPA onto ACS are exothermic and proceed through a physical mechanism. A mass transfer study, using simplified models, proved that the process is controlled by intraparticle and film resistances to mass transfer of the BPA.

Simultaneous removal of lead, copper, cadmium, nickel, and cobalt heavy metal ions from the quinary system by Abies bornmulleriana cones

Abies bornmulleriana cone was used to investigate its biosorption efficiency and capacity of Pb²⁺, Cu²⁺, Cd²⁺, Co²⁺, and Ni²⁺ heavy metal ions in a quinary system. The mechanism of multi-metal removal was illustrated in terms of FTIR results. Electrophoretic mobilities of the biosorbents were determined to access the information about the competitive biosorption. BET surface area and pore volume of the biosorbents before and after the biosorption were defined to be (5.05 m² g^-1 and 0.0018 cm³ g^-1) and (0.97 m² g^-1 and 0.00032 cm³ g^-1), respectively. The average pore width of the biosorbent before and after the biosorption was calculated as 9.34 and 13.04 Å, respectively. The pseudo-first-order model and the pseudo-second-order model were applied to analyze the experimental data. Experimental data have been evaluated according to the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherms. The maximum biosorption efficiency and capacity for Pb²⁺, Cu²⁺, Cd²⁺, Ni²⁺, and Co²⁺ ions were defined as (85.4, 56.4, 35.4, 21.7 and 18.9%) and (8.5, 5.6, 3.5, 2.2 and 1.9 mg g^-1), respectively. The selectivity of heavy metal ions resulted in the magnitude order of Pb²⁺ > Cu²⁺ > Cd²⁺ > Ni²⁺ > Co²⁺.

Aminophosphonic Acid Functionalized Cellulose Nanofibers for Efficient Extraction of Trace Metal Ions

Cellulose nanofibers were covalently functionalized using diethylenetriamine penta (methylene phosphonic acid) and studied for the extraction of heavy metal ions. The surface-functionalized nanofibers showed a high adsorption capacity towards heavy metal ions as compared to bare nanofibers. The elemental composition and surface morphology of the prepared bio-adsorbent was characterized by X-ray photoelectron spectroscopy, attenuated total reflectance infrared spectroscopy, field emission scanning electron microscopy, and energy dispersive spectroscopy. The prepared material was studied to develop a column-based solid phase extraction method for the preconcentration of trace metal ions and their determination by inductively coupled plasma optical emission spectroscopy. The batch experimental data was well fitted to Langmuir adsorption isotherms (R2 > 0.99) and follows pseudo-second-order kinetics. The experimental variables such as sample pH, equilibrium time, column breakthrough, sorption flow rate, the effect of coexisting ions, and eluent type were systematically studied and optimized accordingly. The detection limit of the proposed method was found to be 0.03, 0.05, and 0.04 µg L-1 for Cu(II), Pb(II), and Cd(II), respectively. Certified Reference Materials were analyzed to validate the proposed method against systematic and constant errors. At a 95% confidence level, the Student's t-test values were less than the critical Student's t value (4.302). The developed method was successfully employed for the preconcentration and determination of trace metal ions from real water samples such as river water and industrial effluent.

Facile preparation of porous biomass charcoal from peanut shell as adsorbent

Activated carbons derived from biomass have been proved to be one of the most promising adsorbents due to their abundance, low cost, reproducibility and environmental friendliness. In this study, a simple, facile and effective pyrolysis method was demonstrated to prepare hierarchical porous biomass charcoal by using peanut shells as precursor without chemical activation in an electric muffle furnace. The obtained products hold porous structure and abundant oxygen-containing functional groups, which were mainly due to in-built template of the structure of peanut shell and the preparation process without nitrogen protection, respectively. Interestingly, the obtained biomass charcoal sample with excellent adsorptive property quickly removed Pb2+ (100 mg/L) and methylene blue (50 mg/L) from water with removal efficiency of 96.5% and 97.1%, and removal capacity of 48 mg/g and 24 mg/g, respectively. The synthetic process was simple and economical, and it could be used as a beneficial reference in the recycling of biomass waste.

Development of photocatalytic paint based on TiO2 and photopolymer resin for the degradation of organic pollutants in water

While the use of TiO2 nanoparticles in the form of slurry/suspension requires energy-intensive separation processes, its immobilization in solid support may open new opportunities in the area of sustainable water treatment technologies. In this study, a novel method for the development of photocatalytic paint based on TiO₂ nanoparticles and acrylate-based photopolymer resin is reported. The paint (TiO₂@polymer) was applied on substrates such as plastic petri dish and glass jar, which was polymerized/solidified by ultraviolet light irradiation. The painted petri dish and glass jar were used for the photocatalytic degradation of model organic pollutants viz. methyl orange (MO), methylene blue (MB), and indole in deionized water, simulated fresh drinking water, and tap water matrices. The photocatalytic degradation studies were performed under sunlight and UV-B light were used for. The sunlight-assisted photocatalytic degradation of MO and MB was found to be faster and more efficient than the UV-B light-assisted ones. Under UV-B light irradiation, it took 120 min to degrade about 80% of 6 ppm MB solution, whereas under sunlight irradiation it took 60 min to degrade about 90% of the same MB solution. The photocatalytic paint generated hydroxyl radical (·OH) under the UV-B and sunlight irradiation, which was studied by the terephthalic acid fluorescence tests. Further, the potential release of TiO₂ during the exposure to UV irradiation was studied by single particle ICP-MS analysis.

Single-component and competitive adsorption of tetracycline and Zn(ii) on an NH4Cl-induced magnetic ultra-fine buckwheat peel powder biochar from water: studies on the kinetics, isotherms, and mechanism

Single-component and competitive adsorption of tetracycline (TC) and Zn(ii) on an NH₄Cl-induced magnetic ultra-fine buckwheat peel powder biochar (NH₄Cl-BHP-char/Fe₃O₄) was investigated in batch experiments.

Emerging pollutants-Part II: Treatment

Recently, emerging pollutants (EPs) have been frequently detected in urban wastewater, surface water, drinking water, and other water bodies. EPs mainly usually include pharmaceuticals and personal care products, endocrine-disrupting chemicals, antibiotic resistance genes, persistent organic pollutants, disinfection by-products, and other industrial chemicals. The potential threat of EPs to ecosystems and human health has attracted worldwide attention. Therefore, how to treat EPs in various water bodies has become one of the research priorities. In this paper, some research results on treatment of EPs published in 2018 were summarized. PRACTITIONER POINTS: At present, more attention has been paid to emerging pollutants (EPs), including pharmaceuticals and personal care products (PPCPs), endocrine-disrupting chemicals (EDCs), antibiotic resistance genes, persistent organic pollutants, disinfection by-products, etc. Existing EPs disposal technologies mainly include: engineered wetlands and natural systems, biological treatment, physical and physicochemical separation, chemical oxidation, catalysis, etc. This paper reviews some research results on the treatment technologies of EPs published in 2018.

Acetone fractionation: a simple and efficient method to improve the performance of lignin for dye pollutant removal

In this work, it was found that the adsorption capacity of lignin to cationic dye (methylene blue, MB) from aqueous solution could be significantly improved by simple acetone fractionation. The removal efficiency of MB by acetone insoluble kraft lignin (AIKL) was 10 times that of unfractionated kraft lignin (KL). And the maximum capacity of AIKL could reach up to 623.4 mg g⁻¹. And the high removal rate could be achieved even at low concentrations. The effects of ionic strength, temperature, adsorbent dosage were systematically investigated. Adsorption kinetics showed the adsorption behavior obeyed the pseudo-second-order kinetic model. The equilibrium data was more consistent with the Langmuir isotherm model. Thermodynamic analyses proved that the adsorption was a spontaneous and endothermic physisorption process. In addition, the reasons for the enhanced adsorption effect by fractionation were clarified based on characterization by FT-IR. The enhancement of π–π interaction between AIKL and MB caused by fractionation plays an important role in the adsorption process.

In this work, it was found that the adsorption capacity of lignin to cationic dye (methylene blue, MB) from aqueous solution could be significantly improved by simple acetone fractionation.

Visible-light-driven CQDs@MIL-125(Ti) nanocomposite photocatalyst with enhanced photocatalytic activity for the degradation of tetracycline

In the present study, a novel photocatalyst, CQDs@MIL-125(Ti) (CQDs = carbon quantum dots), was prepared via a solvothermal procedure. The photocatalytic properties were tested by the degradation of tetracycline (TC) with a 250 W Xe lamp (λ > 420 nm). Compared with pure MIL-125(Ti), the 10 wt% CQDs@MIL-125(Ti) photocatalyst can significantly improve the degradation process of TC, and the degradation efficiency can reach 90% within 4 h. The enhancement in the photocatalytic performance is due to the CQDs, which can promote the absorption of visible light and also efficiently accelerate the separation of photogenerated electron–hole pairs. We have also demonstrated that superoxide radicals (·O₂⁻) and holes (h⁺) play crucial roles in the photocatalytic degradation of TC through capture experiments. The current work provides a new idea for constructing high-efficiency photocatalysts based on MIL-125(Ti).

A novel CQDs@MIL-125(Ti) photocatalyst had been synthesized by a facile solvothermal process for the degradation of TC. The possible degradation mechanism was proposed based on the active species trapping experiments.