A fluorescent sensor constructed from nitrogen-doped carbon nanodots (N-CDs) for pH detection in synovial fluid and urea determination

An Approach for Highly Enantioselective Synthesis of meta-Disubstituted [n]Paracyclophanes

Atroposelective synthesis of meta-disubstituted [n]paracyclophanes is a difficult task in organic chemistry. We describe a facile approach for the synthesis of meta-disubstituted [n]paracyclophanes using Pd-catalyzed enantioselective C-H olefination and sequential reductive cleavage. A wide range of [n]paracyclophanes was obtained with excellent enantioselectivity. Thermodynamic analysis revealed that the rotational barrier of meta-disubstituted [n]paracyclophanes was lower than that of para-disubstituted [n]paracyclophanes. The synthesized planar-chiral [14]paracyclophane showed a bright fluorescence emission and impressive circularly polarized luminescence activity.

Simple enzyme based fluorimetric biosensor for urea in human biofluids

As an important biomarker for renal related diseases, detection of urea is playing a vital role in human biofluids on clinical diagnosis concern. In this work, a synthetic salicyaldehyde based imine fluorophore was synthesized using sonication method and conjugated with urease which was used as fluorescent biosensor for the detection of urea in serum samples. This enzyme based biosensor has shown a good selectivity and sensitivity towards urea with the linear range from 2 to 80 mM and the detection limit of 73 µM. The sensing response obtain is highly agreeing with existing analytical technique for urea detection which strongly recommends this biosensor for clinical application.

Nitrogen, sulfur-doped carbon quantum dots with large Stokes shift for real-time monitoring of pH in living cells

Construction of carbon quantum dots-based (CQDs) fluorescent probes for real-time monitoring pH in cells is still unsatisfied. Here, we propose the synthesis of nitrogen, sulfur-doped CQDs (N,S-CQDs) using one-pot hydrothermal treatment, and serve it as fluorescent probes to realize the real-time sensing of intracellular pH. These pH-responsive N,S-CQDs were proved exhibited a diversity of admirable properties, including great photostability, nontoxicity, favorable biocompatibility, and high selectivity. Particularly, due to the doping of nitrogen and sulfur, N,S-CQDs possessed long-wavelength emission and large Stokes Shift (190 nm), which could avoid self-absorption of tissue to realize high contrast and resolution bioimaging. The response of the probes to pH showed a good linear in range of 0.93-7.00 with coefficient of determination of 0.9956. Moreover, with advantages of high signal-to-noise ratio and stability against photobleaching, the as-prepared N,S-CQDs were successfully applied to monitor pH in living cells via bioimaging. All findings suggest that N,S-CQDs have significant potential for practical application for sensing and visualizing pH fluctuation in living systems.

On-signal amplification of silver nanosol RRS/SERS aptamer detection of ultratrace urea by polystyrene nanosphere catalyst

The catalytic amplification signal of polystyrene nanosphere (PN) is used to conveniently fabricate the resonance Rayleigh scattering (RRS)/surface-enhanced Raman scattering (SERS) dual-mode method to sensitively and selectively detect urea in food. PN has strong catalysis of the slow nanoreaction of citrate-Ag(I) to produce yellow silver nanoparticles (AgNP), which exhibit strong RRS effect and SERS effect with molecular probes. When aptamer (Apt) is present, the Apt is adsorbed on the PN surface, the catalysis is weakened, the AgNP is reduced, and the SERS/RRS signal is weakened. After adding urea to exhibit specific Aptamer reaction, the Apt is desorbed from the PN surface and the catalysis is restored. As urea increase, the desorbed PNs increase to produce more AgNPs indicator to increase SERS/RRS signal. The increase value △I of SERS/RRS is linearly to urea concentration. Therefore, a sensitive and selective SERS/RRS dual-mode method for urea is established based on aptamers-regulated the catalysis of PNs. This method is applied to the detection of urea in milk with satisfactory results. The relative standard deviation is 3.9-6.8% and the recovery rate is 94.5-102%.

A facile “off-on” pattern based on one-pot synthesis of N doped carbon dots for sensitive detection of Ag+ and S2O32-

In this work, a new “off-on” fluorescence strategy for determination of Ag+ and S2O32− has been presented. Nitrogen doped carbon dots (N-CDs) were synthesized using oxalic acid dihydrate and ethylenediamine...

Urea detection in milk by urease-assisted pH-sensitive carbon dots

Excessive urea in milk will lead to serious health problems. To detect whether the urea concentration in milk exceeds the standard and ensure the quality of milk, it is necessary to develop detection technology for urea in milk. But it is difficult to detect urea in milk conveniently and accurately by traditional methods. To measure the concentration of urea in milk, stable green light carbon dots (CDs) were synthesized by a one-step method as a fluorescent probe. Then, 3, 5-diaminobenzoic acid was used as the precursor for CD synthesis. Experimental results showed that CDs can generate strong fluorescence when excited by light (350-450 nm). The fluorescence peak wavelength is 490 nm, and the optimum excitation wavelength is 390 nm. The fluorescence intensity of CDs has a significant change with variations of pH (pH of 6-9), and the higher the pH, the lower the fluorescence intensity. Additionally, urea can be hydrolyzed by urease to produce ammonia and carbon dioxide. Ammonia is ionized in water to produce OH^-, which increases the pH of the solution. After adding standard urea to milk, urease and CDs are added. The fluorescence intensity of CDs in the mixed solution decreases as the concentration of standard added urea increases. Thus the concentration of urea in milk can be calculated. The experimental results show that the CD method for detecting urea in milk has advantages of high sensitivity and wide measurement range. The linear interval is 25-500 mg/L, R² is 0.998, and the limit of detection is 6.27 mg/L. The concentration of urea in the milk used in the experiment is 265.46 mg/L. CDs are easy to fabricate, and the advantages of the method are simple operation, no pretreatment, safety, and low cost. A new method for the detection of urea in milk was established, to the best of our knowledge, and this method can aid in food quality control.

Near-infrared emitting dual-stimuli-responsive carbon dots from endogenous bile pigments

Carbon dots are biocompatible nanoparticles suitable for a variety of biomedical applications. Careful selection of carbon dot precursors and surface modification techniques has allowed for the development of carbon dots with strong near-infrared fluorescence emission. However, carbon dots that provide strong fluorescence contrast would prove even more useful if they were also responsive to stimuli. In this work, endogenous bile pigments bilirubin (BR) and biliverdin (BV) were used for the first time to synthesize stimuli-responsive carbon dots (BR-CDots and BV-CDots respectively). The precursor choice lends these carbon dots spectroscopic characteristics that are enzyme-responsive and pH-responsive without the need for surface modifications post-synthesis. Both BV- and BR-CDots are water-dispersible and provide fluorescence contrast, while retaining the stimuli-responsive behaviors intrinsic to their precursors. Nanoparticle Tracking Analysis revealed that the hydrodynamic size of the BR-CDots and BV-CDots decreased with exposure to bilirubin oxidase and biliverdin reductase, respectively, indicating potential enzyme-responsive degradation of the carbon dots. Fluorescence spectroscopic data demonstrate that both BR-CDots and BV-CDots exhibit changes in their fluorescence spectra in response to changes in pH, indicating that these carbon dots have potential applications in pH sensing. In addition, BR-CDots are biocompatible and provide near-infrared fluorescence emission when excited with light at wavelengths of 600 nm or higher. This work demonstrates the use of rationally selected carbon sources for obtaining near-infrared fluorescence and stimuli-responsive behavior in carbon dots that also provide strong fluorescence contrast.

N-Doped carbon dots for the fluorescence and colorimetry dual-mode detection of curcumin

Nitrogen doped carbon dots (N-CDs) were synthesized by a one-step hydrothermal method with dopamine and ethylenediamine. The as-prepared N-CDs were characterized via transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), fluorescence spectrophotometer, UV-Vis spectrophotometry and Fourier transform infrared spectroscopy (FTIR). The average particle dimension of the as-prepared N-CDs was 2.68 nm, and the best excitation and emission wavelengths were 405 nm and 535 nm, separately. N-CDs exhibits excellent selectivity and sensitivity to detect the curcumin (Cur), attaining a wider linear range of 97.5 nM-67.9 μM and a limit of detection (LOD) of as low as 94 nM. Interestingly, N-CDs can also give responsive signals of a visible colour change (yellow to red). Moreover, a novel fluorescent/colorimetric dual-mode method has been successfully employed for the determination of Cur in real samples with good recoveries (94%-110%) and precision (RSD = 0.3-2.9%).

A novel carbon dot/polyacrylamide composite hydrogel film for reversible detection of the antibacterial drug ornidazole

A carbon dot/polyacrylamide (CDs/PAM) composite hydrogel film with stable fluorescence performance was fabricated by merging a hydrogel film and carbon dots (CDs) with blue fluorescence, which were prepared by hydrothermal synthesis using anhydrous citric acid and acrylamide as carbon sources. The obtained CDs/PAM composite hydrogel film exhibited a good fluorescence quenching effect on ornidazole (ONZ), and can be used for the quantitative detection of ONZ. In the ONZ concentration range of 5-60 μM, a good linear relationship between the fluorescence quenching efficiency of the CDs/PAM composite hydrogel film and the concentration of ONZ solution was obtained with a low detection limit of 2.35 μM. In addition, the detection system has good selectivity and strong anti-interference capacity, and can be used in repeated cycles for detection.

Equipment-free quantitative determination of urea based on paper-based sensor via urease-mediated chitosan viscosity change

In this study, a paper-based sensor combined with visual distance-readout technique for point of-care testing (POCT) of urea was developed by urease-mediated chitosan viscosity change. A series of factors that affect the performance of the sensor were investigated, including the type of filter paper, chitosan concentration, acetic acid concentration and enzymatic reaction conditions. Under optimal conditions, the proposed method for urea determination has good linearity between 3.8-15.1 mM. The limit of quantitation is 3.8 mM. Finally, the paper-based sensor was successfully applied to the determination of urea in two diesel exhaust fluid (DEF) samples. The recoveries of urea were 91.4 % and 109.9 % in DEF-1 and DEF-2, respectively. The present study provides a novel approach, which integrates paper-based sensor and visual distance-readout technique, for monitoring urea in POCT application, especially in remote or resource-limited regions.

pH-modulated aggregation-induced emission of Au/Cu nanoclusters and its application to the determination of urea and dissolved ammonia

A fluorescence platform is designed based on aggregation-induced emission of Au/Cu nanoclusters (Au/Cu NCs) driven by pH value. When pH increases from 6.0 to 7.0, Au/Cu NCs change from aggregation to dispersion, accompanied by the oxidation of Cu cores. Under the catalysis of urease, urea is hydrolysed to release ammonia, which further undergoes a hydrolysis reaction to produce OH^-, causing the pH to increase. The fluorescence of Au/Cu NCs quenches linearly at 590 nm with the excitation wavelength at 320 nm when the concentration of urea varies from 5.0 to 100 μM. The limit of detection (LOD) and limit of quantification (LOQ) of urea are 2.23 and 7.45 μM, respectively. Combined with headspace single-drop microextraction technology, Au/Cu NCs are employed to monitor dissolved ammonia with low-cost and simple operation. The linear range of dissolved ammonia is from 20 to 300 μM. The LOD and LOQ of dissolved ammonia are 7.04 and 23.4 μM, respectively. The relative standard deviation (RSD) values of the intra-day and inter-day precision of urea are 2.4-3.0% and 3.0-3.7%, respectively, and those of dissolved ammonia are in the range 3.4-5.1% (intra-day precision) and 4.2-5.8% (inter-day precision). No interferences have been indentified in the determination of urea and dissolved ammonia. Finally, the proposed method has been applied to determine urea in human urine samples and dissolved ammonia in water samples with satisfactory results.Graphical abstract The pH increase produces the dispersion and decomposition of Au/Cu NCs, leading to the fluorescence quenching. Both urea and dissolved ammonia are detected successfully because they cause the pH change to alkaline.

Antibacterial activity of positively charged carbon quantum dots without detectable resistance for wound healing with mixed bacteria infection

Widespread bacterial infection and the spread of antibiotic resistance exhibit increasing threat to the public and thus require new antibacterial strategies. Carbon quantum dots (CQDs) have been extensively investigated to play fluorescent, catalytic roles and even potential biomedical functions containing sterilization. However, synthetic understanding of the interaction of CQDs and bacteria, the exhibition of antibacterial ability, and the risk of resistance evolution remain lacking. Herein, a simple one-pot method was fabricated to prepare positively charged CQDs (PC-CQDs) as a broad-spectrum antibacterial agent. PC-CQDs possessed effective antibacterial activity against all tested Gram-positive, Gram-negative, and drug-resistant bacteria. Investigation of the antibacterial mechanism of PC-CQDs indicated that small-sized PC-CQDs functionalized with -NH₂ and -NH induced strong adherence behavior on the bacterial cell membrane. Moreover, the entry of PC-CQDs caused conformational changes in the genes and generation of reactive oxygen species in the bacteria. Safety evaluation illustrated that PC-CQDs did not trigger detectable drug resistance or hemolysis. Furthermore, PC-CQDs effectively promoted the antibacterial treatment of mixed Staphylococcus aureus and Escherichia coli infected wound in rats with low in vivo toxicity. These results suggested that PC-CQDs are a potential antibacterial candidate for real wound healing applications in complex bacterial infections and even resistant bacteria-caused infections.

Solution Blowing Spinning Technology towards Green Development of Urea Sensor Nanofibers Immobilized with Hydrazone Probe

Cellulose has been one of the most widespread materials due to its renewability, excellent mechanical properties, biodegradability, high absorption ability, biocompatibility and cheapness. Novel, simple and green colorimetric fibrous film sensor was developed by immobilization of urease enzyme (U) and tricyanofuran hydrazone (TCFH) molecular probe onto cellulose nanofibers (CNF). Cellulose acetate nanofibers (CANF) were firstly prepared from cellulose acetate using the simple, green and low cost solution blowing spinning technology. The produced CANF was exposed to deacetylation to introduce CNF, which was then treated with a mixture of TCFH and urease enzyme to introduce CNF-TCFH-U nanofibrous biosensor. CNF were reinforced with tricyanofuran hyrazone molecular probe and urease enzyme was encapsulated into calcium alginate biopolymer to establish a biocomposite film. This CNF-TCFH-U naked-eye sensor can be applied as a disposable urea detector. CNF demonstrated a large surface area and was utilized as a carrier for TCFH, which is the spectroscopic probe and urease is a catalyst. The biochromic CNF-TCFH-U nanofibrous biosensor responds to an aqueous medium of urea via a visible color signal changing from off-white to dark pink. The morphology of the generated CNF and CNF-TCFH-U nanofibrous films were characterized by different analytical tools, including energy-dispersive X-ray patterns (EDX), polarizing optical microscope (POM), Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM). SEM images of CNF-TCFH-U nanofibers demonstrated diameters between 800 nm and 2.5 μm forming a nonwoven fabric with a homogeneous distribution of TCFH/urease-containing calcium alginate nanoparticles on the surface of CNF. The morphology of the cross-linked calcium alginate nanoparticles was also explored using transmission electron microscopy (TEM) to indicate an average diameter of 56-66 nm. The photophysical performance of the prepared CNF-TCFH-U was also studied by CIE Lab coloration parameters. The nanofibrous film biosensor displayed a relatively rapid response time (5-10 min) and a limit of detection as low as 200 ppm and as high as 1400 ppm. Tricyanofuran hydrazone is a pH-responsive disperse dye comprising a hydrazone detection group. Determination of urea occurs through a proton transfer from the hydrazone group to the generated ammonia from the reaction of urea with urease.

Synthesis of green-emitting carbon quantum dots with double carbon sources and their application as a fluorescent probe for selective detection of Cu2+ ions

Green-emitting carbon quantum dots (G-CQDs) were prepared using tartaric acid and bran by one-pot solvothermal treatment and had photoluminescence quantum yields (PL QY) as high as 46%. The morphology of the G-CQDs is characterized by TEM, which shows the average diameter of G-CQDs is approximately ∼4.85 nm. The FT-IR spectra display the presence of -OH, C-N, N-H and -COOH on the surface of the G-CQDs. The emission wavelength of the G-CQDs was ∼539 nm in the case of ∼450 nm excitation wavelength, which corresponds to the green fluorescence. Furthermore, the G-CQDs were used as a fluorescent probe for detection Cu2+ ions, and demonstrated a linear distribution between ln(F/F 0) and the Cu2+ ions concentration. Specifically, the Cu2+ ion concentration should fall in the G-CQD concentration range of 0-0.5 mM and the detection limit is 0.0507 μM. Thus, due to the excellent chemical stability and good luminescence performance, these G-CQDs could be excellent probes widely used in detection fields.

Highly photoluminescent and temperature-sensitive P, N, B-co-doped carbon quantum dots and their highly sensitive recognition for curcumin

Temperature-sensitive P, N, B-co-doped carbon quantum dots (PNBCDs) synthesized using one-pot method exhibit many excellent features, such as strong fluorescence, good stability and sensitive detection for curcumin.