1
|
Yang C, Liu Q, Li T, Zhou R, Qu C, Tang Y. An application of hierarchical MgAl hydrotalcite in the highly efficient treatment of oilfield macromolecular contaminants. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024; 31:42792-42809. [PMID: 38878248 DOI: 10.1007/s11356-024-33993-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/08/2024] [Accepted: 06/10/2024] [Indexed: 07/04/2024]
Abstract
In this work, salicylic acid (SA) was used to induce the self-assembly of octadecyl trimethyl ammonium chloride (OTAC), a cationic surfactant, into three-dimensional wormlike micelle aggregates. These aggregates act as a soft template for hierarchical MgAl hydrotalcite (LDH) to create a multi-level pore structure adsorption material. Scanning electron microscopy characterization showed that the surface of the hierarchical hydrotalcite exhibited a dense layered structure, unlike the monolayer structure of ordinary hydrotalcite. Furthermore, the hierarchical MgAl-LDH possesses a significantly larger specific surface area (113.94 m2/g) and wide pore size distribution ranging more extensively from 2 to 80 nm, which significantly has an impressive adsorption effect on sulfonated lignite (SL), with a maximum adsorption capacity of 192.7 mg/g at pH = 7. Extensive research has been conducted on the adsorption mechanism of hierarchical MgAl-LDH, attributing it to surface adsorption due to the unique multi-level structure of the adsorbent. After two cycles of regeneration experiments, the adsorption capacity of the adsorbent remained at a high level of 179.1 mg/g, demonstrating the excellent renewability of hierarchical MgAl-LDH. Moreover, the hierarchical hydrotalcite showed high adsorption capacity in the adsorption of sulfonated lignite, which was attributed to its larger specific surface area and superior pore structure to expose more active sites.
Collapse
Affiliation(s)
- Chenye Yang
- Shaanxi Province Key Laboratory of Environmental Pollution Control and Reservoir Protection Technology of Oilfields, Xi'an Shiyou University, Xi'an, China
- Shaanxi University Engineering Research Center of Oil and Gas Field Chemistry, Xi'an Shiyou University, Xi'an, 710065, China
| | - Qi Liu
- Xi'an Alberta Resources & Environment Analysis and Testing Technology Co., Ltd, Xi'an, 710000, China
| | - Tao Li
- Xi'an Alberta Resources & Environment Analysis and Testing Technology Co., Ltd, Xi'an, 710000, China
| | - Rui Zhou
- Shaanxi Province Key Laboratory of Environmental Pollution Control and Reservoir Protection Technology of Oilfields, Xi'an Shiyou University, Xi'an, China
| | - Chengtun Qu
- Shaanxi Province Key Laboratory of Environmental Pollution Control and Reservoir Protection Technology of Oilfields, Xi'an Shiyou University, Xi'an, China
- Shaanxi University Engineering Research Center of Oil and Gas Field Chemistry, Xi'an Shiyou University, Xi'an, 710065, China
| | - Ying Tang
- Shaanxi Province Key Laboratory of Environmental Pollution Control and Reservoir Protection Technology of Oilfields, Xi'an Shiyou University, Xi'an, China.
- Shaanxi University Engineering Research Center of Oil and Gas Field Chemistry, Xi'an Shiyou University, Xi'an, 710065, China.
| |
Collapse
|
2
|
Li L, Soyhan I, Warszawik E, van Rijn P. Layered Double Hydroxides: Recent Progress and Promising Perspectives Toward Biomedical Applications. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2306035. [PMID: 38501901 PMCID: PMC11132086 DOI: 10.1002/advs.202306035] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/12/2023] [Indexed: 03/20/2024]
Abstract
Layered double hydroxides (LDHs) have been widely studied for biomedical applications due to their excellent properties, such as good biocompatibility, degradability, interlayer ion exchangeability, high loading capacity, pH-responsive release, and large specific surface area. Furthermore, the flexibility in the structural composition and ease of surface modification of LDHs makes it possible to develop specifically functionalized LDHs to meet the needs of different applications. In this review, the recent advances of LDHs for biomedical applications, which include LDH-based drug delivery systems, LDHs for cancer diagnosis and therapy, tissue engineering, coatings, functional membranes, and biosensors, are comprehensively discussed. From these various biomedical research fields, it can be seen that there is great potential and possibility for the use of LDHs in biomedical applications. However, at the same time, it must be recognized that the actual clinical translation of LDHs is still very limited. Therefore, the current limitations of related research on LDHs are discussed by combining limited examples of actual clinical translation with requirements for clinical translation of biomaterials. Finally, an outlook on future research related to LDHs is provided.
Collapse
Affiliation(s)
- Lei Li
- Department of Biomedical EngineeringUniversity of GroningenUniversity Medical Center GroningenA. Deusinglaan 1Groningen, AV9713The Netherlands
- W. J. Kolff Institute for Biomedical Engineering and Materials ScienceUniversity of GroningenUniversity Medical Center GroningenA. Deusinglaan 1Groningen, AV9713The Netherlands
| | - Irem Soyhan
- Department of Biomedical EngineeringUniversity of GroningenUniversity Medical Center GroningenA. Deusinglaan 1Groningen, AV9713The Netherlands
- W. J. Kolff Institute for Biomedical Engineering and Materials ScienceUniversity of GroningenUniversity Medical Center GroningenA. Deusinglaan 1Groningen, AV9713The Netherlands
| | - Eliza Warszawik
- Department of Biomedical EngineeringUniversity of GroningenUniversity Medical Center GroningenA. Deusinglaan 1Groningen, AV9713The Netherlands
- W. J. Kolff Institute for Biomedical Engineering and Materials ScienceUniversity of GroningenUniversity Medical Center GroningenA. Deusinglaan 1Groningen, AV9713The Netherlands
| | - Patrick van Rijn
- Department of Biomedical EngineeringUniversity of GroningenUniversity Medical Center GroningenA. Deusinglaan 1Groningen, AV9713The Netherlands
- W. J. Kolff Institute for Biomedical Engineering and Materials ScienceUniversity of GroningenUniversity Medical Center GroningenA. Deusinglaan 1Groningen, AV9713The Netherlands
| |
Collapse
|
3
|
Shah N, Shah M, Khan F, Rehan T, Shams S, Khitab F, Khan A, Ullah MW, Yousaf J, Awwad FA, Ismail EAA. Fabrication and Characterization of Montmorillonite Clay/Agar-Based Magnetic Composite and Its Biological and Electrical Conductivity Evaluation. ACS OMEGA 2024; 9:15904-15914. [PMID: 38617699 PMCID: PMC11007821 DOI: 10.1021/acsomega.3c08708] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/02/2023] [Revised: 02/22/2024] [Accepted: 02/26/2024] [Indexed: 04/16/2024]
Abstract
Montmorillonite clay and agar are naturally occurring materials of significant importance in designing biocompatible materials tailored for applications in biotechnology and medicine. The introduction of magnetic properties has the potential to significantly boost their characteristics and expand their applications. In this study, we have successfully synthesized highly intercalated magnetic composites, incorporating magnetic iron oxide nanoparticles (MNPs), montmorillonite clay (MMT), and agar (AG), through a thermo-physicomechanical method. Three samples of MMT-AG with 2, 1.5, and 0.5% MNPs and three sample composites of MNPs-AG with 2, 1, and 0.5% MMT clay are prepared. The synthesized composites were characterized by SEM, XRD, TGA, DTA, and FTIR. SEM analysis revealed a uniform dispersion of MNPs and MMT in the composite. The XRD pattern confirmed the presence of MNPs in the composite site. The TGA and DTA results demonstrated improved thermal stability due to the MNP incorporation. FTIR spectra showed all of the constituents of agar, MNPs, and MMT clay. The swelling ratio was observed to range from 835% to 1739%. The swelling study indicated an increased hydrophobicity with the addition of MNPs to the composite. Antibacterial activities revealed a significant inhibition of Escherichia coli (E. coli) growth by ranging from 10 to 19 nm in the composite. The composite also exhibited a considerable antioxidant action, with IC50 values of 7.96, 46.55, and 57.58 μg/mL, and electrical properties just like conductors.
Collapse
Affiliation(s)
- Nasrullah Shah
- Department
of Chemistry, Abdul Wali Khan University
Mardan, Mardan KP-23200, Pakistan
| | - Muffarih Shah
- Department
of Chemistry, Abdul Wali Khan University
Mardan, Mardan KP-23200, Pakistan
| | - Farishta Khan
- Department
of Chemistry, Abdul Wali Khan University
Mardan, Mardan KP-23200, Pakistan
| | - Touseef Rehan
- Department
of Biochemistry, Women University Mardan, Mardan KP-23200, Pakistan
| | - Sulaiman Shams
- Department
of Biochemistry, Abdul Wali Khan University
Mardan, Mardan KP-23200, Pakistan
| | - Fatima Khitab
- Department
of Chemistry, Shaheed Benazir Bhutto Women
University, Peshawar KP-25000, Pakistan
| | - Abbas Khan
- Department
of Chemistry, Abdul Wali Khan University
Mardan, Mardan KP-23200, Pakistan
| | - Muhammad Wajid Ullah
- Biofuels
Institute, School of the Environmental and Safety Engineering, Jiangsu University, Zhenjiang 212013, China
| | - Jasim Yousaf
- Department
of Physics, Abdul Wali Khan University Mardan, Mardan KP-23200, Pakistan
| | - Fuad A. Awwad
- Department
of Quantitative Analysis, College of Business Administration, King Saud University, P.O. Box 71115, Riyadh 11587, Saudi Arabia
| | - Emad A. A. Ismail
- Department
of Quantitative Analysis, College of Business Administration, King Saud University, P.O. Box 71115, Riyadh 11587, Saudi Arabia
| |
Collapse
|
4
|
Jilili Y, Zhen W, Li H, Luo D. Preparation of modified hydrotalcite based on click chemistry and its effect on the shear induced crystallization, rheological behavior and thermal degradability of poly (lactic acid) film. POLYM-PLAST TECH MAT 2022. [DOI: 10.1080/25740881.2022.2033773] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/18/2023]
Affiliation(s)
- Yikelamu Jilili
- Key Laboratory of Oil and Gas Fine Chemicals, Ministry of Education and Xinjiang Uygur Autonomous Region, School of Chemical Engineering and Technology, Xinjiang University, Urumqi, China
| | - Weijun Zhen
- Key Laboratory of Oil and Gas Fine Chemicals, Ministry of Education and Xinjiang Uygur Autonomous Region, School of Chemical Engineering and Technology, Xinjiang University, Urumqi, China
| | - Hao Li
- Key Laboratory of Oil and Gas Fine Chemicals, Ministry of Education and Xinjiang Uygur Autonomous Region, School of Chemical Engineering and Technology, Xinjiang University, Urumqi, China
| | - Dawei Luo
- Key Laboratory of Oil and Gas Fine Chemicals, Ministry of Education and Xinjiang Uygur Autonomous Region, School of Chemical Engineering and Technology, Xinjiang University, Urumqi, China
| |
Collapse
|
5
|
Gomez NAG, Machado Silva G, Wypych F. Intercalation of anionic organic ultraviolet absorbers in bimetallic and trimetallic layered double hydroxides for low-density polyethylene protection. Polym Bull (Berl) 2022. [DOI: 10.1007/s00289-021-03640-x] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
6
|
Naseem S, Wießner S, Kühnert I, Leuteritz A. Layered Double Hydroxide (MgFeAl-LDH)-Based Polypropylene (PP) Nanocomposite: Mechanical Properties and Thermal Degradation. Polymers (Basel) 2021; 13:3452. [PMID: 34641267 PMCID: PMC8512664 DOI: 10.3390/polym13193452] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/22/2021] [Revised: 10/01/2021] [Accepted: 10/05/2021] [Indexed: 12/01/2022] Open
Abstract
This work analyzes the thermal degradation and mechanical properties of iron (Fe)-containing MgAl layered double hydroxide (LDH)-based polypropylene (PP) nanocomposite. Ternary metal (MgFeAl) LDHs were prepared using the urea hydrolysis method, and Fe was used in two different concentrations (5 and 10 mol%). Nanocomposites containing MgFeAl-LDH and PP were prepared using the melt mixing method by a small-scale compounder. Three different loadings of LDHs were used in PP (2.5, 5, and 7.5 wt%). Rheological properties were determined by rheometer, and flammability was studied using the limiting oxygen index (LOI) and UL94 (V and HB). Color parameters (L*, a*, b*) and opacity of PP nanocomposites were measured with a spectrophotometer. Mechanical properties were analyzed with a universal testing machine (UTM) and Charpy impact test. The thermal behavior of MgFeAl-LDH/PP nanocomposites was studied using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). The morphology of LDH/PP nanocomposites was analyzed with a scanning electron microscope (SEM). A decrease in melt viscosity and increase in burning rate were observed in the case of iron (Fe)-based PP nanocomposites. A decrease in mechanical properties interpreted as increased catalytic degradation was also observed in iron (Fe)-containing PP nanocomposites. Such types of LDH/PP nanocomposites can be useful where faster degradation or faster recycling of polymer nanocomposites is required because of environmental issues.
Collapse
Affiliation(s)
- Sajid Naseem
- Leibniz-Institut für Polymerforschung Dresden e.V., Hohe Straße 6, 01069 Dresden, Germany; (S.W.); (I.K.); (A.L.)
- Institute of Materials Science, Technische Universität Dresden, 01062 Dresden, Germany
| | - Sven Wießner
- Leibniz-Institut für Polymerforschung Dresden e.V., Hohe Straße 6, 01069 Dresden, Germany; (S.W.); (I.K.); (A.L.)
- Institute of Materials Science, Technische Universität Dresden, 01062 Dresden, Germany
| | - Ines Kühnert
- Leibniz-Institut für Polymerforschung Dresden e.V., Hohe Straße 6, 01069 Dresden, Germany; (S.W.); (I.K.); (A.L.)
| | - Andreas Leuteritz
- Leibniz-Institut für Polymerforschung Dresden e.V., Hohe Straße 6, 01069 Dresden, Germany; (S.W.); (I.K.); (A.L.)
| |
Collapse
|
7
|
Wang JM, Wang H, Chen EC, Chen YJ, Wu TM. Role of Organically-Modified Zn-Ti Layered Double Hydroxides in Poly(Butylene Succinate-Co-Adipate) Composites: Enhanced Material Properties and Photodegradation Protection. Polymers (Basel) 2021; 13:2181. [PMID: 34209173 PMCID: PMC8272187 DOI: 10.3390/polym13132181] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/16/2021] [Revised: 06/29/2021] [Accepted: 06/29/2021] [Indexed: 11/17/2022] Open
Abstract
In this research, the effects of Zn-Ti layered double hydroxide (Zn-Ti LDH) as a UV-protection additive, which was added to the poly(butylene succinate-co-adipate) (PBSA) matrix, were investigated. Stearic acid was used to increase the hydrophobicity of Zn-Ti LDH via ion-exchange method. Transmission electron microscopy images of PBSA composites showed that modified Zn-Ti LDH (m-LDH) well-dispersed in the polymer matrix. Due to the effect of heterogeneous nucleation, the crystallization temperature of the composite increased to 52.9 °C, and the accompanying crystallinity increased to 31.0% with the addition of 1 wt% m-LDH. The additional m-LDH into PBSA copolymer matrix significantly enhanced the storage modulus, as compared to pure PBSA. Gel permeation chromatography and Fourier transform infrared spectroscopy analysis confirmed that the addition of m-LDH can reduce the photodegradation of PBSA.
Collapse
Affiliation(s)
| | | | | | | | - Tzong-Ming Wu
- Department of Materials Science and Engineering, National Chung Hsing University, 250 Kuo Kuang Road, Taichung 402, Taiwan; (J.-M.W.); (H.W.); (E.-C.C.); (Y.-J.C.)
| |
Collapse
|
8
|
Effect of LDHs and Other Clays on Polymer Composite in Adsorptive Removal of Contaminants: A Review. CRYSTALS 2020. [DOI: 10.3390/cryst10110957] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Abstract
Recently, the development of a unique class of layered silicate nanomaterials has attracted considerable interest for treatment of wastewater. Clean water is an essential commodity for healthier life, agriculture and a safe environment at large. Layered double hydroxides (LDHs) and other clay hybrids are emerging as potential nanostructured adsorbents for water purification. These LDH hybrids are referred to as hydrotalcite-based materials or anionic clays and promising multifunctional two-dimensional (2D) nanomaterials. They are used in many applications including photocatalysis, energy storage, nanocomposites, adsorption, diffusion and water purification. The adsorption and diffusion capacities of various toxic contaminants heavy metal ions and dyes on different unmodified and modified LDH-samples are discussed comparatively with other types of nanoclays acting as adsorbents. This review focuses on the preparation methods, comparison of adsorption and diffusion capacities of LDH-hybrids and other nanoclay materials for the treatment of various contaminants such as heavy metal ions and dyes.
Collapse
|
9
|
Nedelcu D, Mazurchevici SN, Popa RI, Lohan NM, Maldonado-Cortés D, Carausu C. Tribological and Dynamical Mechanical Behavior of Prototyped PLA-Based Polymers. MATERIALS (BASEL, SWITZERLAND) 2020; 13:E3615. [PMID: 32824229 PMCID: PMC7475983 DOI: 10.3390/ma13163615] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/07/2020] [Revised: 08/06/2020] [Accepted: 08/12/2020] [Indexed: 11/17/2022]
Abstract
It is essential to combine current state-of-the-art technologies such as additive manufacturing with current ecological needs. Due to the increasing demand for non-toxic biodegradable materials and products, human society has been searching for new materials. Consequently, it is compulsory to identify the qualities of these materials and their behavior when subjected to various external factors, to find their optimal solutions for application in various fields. This paper refers to the biodegradable Polylactic acid (PLA)-based filament (commercially known as Extrudr BDP (Biodegradable Plastic) Flax) compared with the biodegradable composite material PLA-lignin filament whose constituent's trade name is Arboblend V2 Nature as a lignin base material and reinforcement with Extrudr BDP Pearl, a PLA based polymer, 3D printed by Fused Deposition Modeling technology. Certain mechanical properties (tensile strength, bending strength and DMA-Dynamic Mechanical Analysis) were also determined. The tribology behavior (friction coefficient and wear), the structure and the chemical composition of the biodegradable materials were investigated by SEM-Scanning Electron Microscopy, EDX-Energy Dispersive X-Ray Analysis, XRD-X-Ray Diffraction Analysis, FTIR-Fourier Transform Infrared Spectrometer and TGA-Thermogravimetric Analysis. The paper also refers to the influence of technological parameters on the 3D printed filaments made of Extrudr BDP Flax and the optimization those of technological parameters. The thermal behavior during the heating of the sample was analyzed by Differential scanning calorimetry (DSC). As a result of the carried-out research, we intend to recommend these biodegradable materials as possible substituents for plastics in as many fields of activity as possible.
Collapse
Affiliation(s)
- Dumitru Nedelcu
- Department of Machine Manufacturing Technology, “Gheorghe Asachi” Technical University of Iasi, Str. Prof. Dr. Doc. Dumitru Mangeron, No. 59A, 700050 Iasi, Romania; (S.-N.M.); (R.-I.P.); (C.C.)
- Academy of Romanian Scientists, Str. Ilfov, No. 3, Sector 5, 060274 Bucharest, Romania
| | - Simona-Nicoleta Mazurchevici
- Department of Machine Manufacturing Technology, “Gheorghe Asachi” Technical University of Iasi, Str. Prof. Dr. Doc. Dumitru Mangeron, No. 59A, 700050 Iasi, Romania; (S.-N.M.); (R.-I.P.); (C.C.)
| | - Ramona-Iuliana Popa
- Department of Machine Manufacturing Technology, “Gheorghe Asachi” Technical University of Iasi, Str. Prof. Dr. Doc. Dumitru Mangeron, No. 59A, 700050 Iasi, Romania; (S.-N.M.); (R.-I.P.); (C.C.)
| | - Nicoleta-Monica Lohan
- Department of Materials Engineering and Industrial Safety, “Gheorghe Asachi” Technical University of Iasi, Str. Prof. Dr. Doc. Dumitru Mangeron, No. 71A, 700050 Iasi, Romania;
| | | | - Constantin Carausu
- Department of Machine Manufacturing Technology, “Gheorghe Asachi” Technical University of Iasi, Str. Prof. Dr. Doc. Dumitru Mangeron, No. 59A, 700050 Iasi, Romania; (S.-N.M.); (R.-I.P.); (C.C.)
| |
Collapse
|
10
|
Morphology, Thermal Stability, and Flammability Properties of Polymer-Layered Double Hydroxide (LDH) Nanocomposites: A Review. CRYSTALS 2020. [DOI: 10.3390/cryst10070612] [Citation(s) in RCA: 30] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Abstract
The utilization of layered nanofillers in polymer matrix, as reinforcement, has attracted great interest in the 21st century. This can be attributed to the high aspect ratios of the nanofillers and the attendant substantial improvement in different properties (i.e., increased flammability resistance, improved modulus and impact strength, as well as improved barrier properties) of the resultant nanocomposite when compared to the neat polymer matrix. Amongst the well-known layered nanofillers, layered inorganic materials, in the form of LDHs, have been given the most attention. LDH nanofillers have been employed in different polymers due to their flexibility in chemical composition as well as an adjustable charge density, which permits numerous interactions with the host polymer matrices. One of the most important features of LDHs is their ability to act as flame-retardant materials because of their endothermic decomposition. This review paper gives detailed information on the: preparation methods, morphology, flammability, and barrier properties as well as thermal stability of LDH/polymer nanocomposites.
Collapse
|
11
|
Naseem S, Gevers B, Boldt R, Labuschagné FJJ, Leuteritz A. Comparison of transition metal (Fe, Co, Ni, Cu, and Zn) containing tri-metal layered double hydroxides (LDHs) prepared by urea hydrolysis. RSC Adv 2019; 9:3030-3040. [PMID: 35518998 PMCID: PMC9059937 DOI: 10.1039/c8ra10165e] [Citation(s) in RCA: 35] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/11/2018] [Accepted: 01/16/2019] [Indexed: 11/25/2022] Open
Abstract
This paper details a successful synthesis and comparison of a range of tri-metal hydrotalcite-like layered double hydroxides (LDHs) using urea hydrolysis. Transition-metal-substituted MgMAl-LDHs were synthesized with M = Fe, Co, Ni, Cu or Zn. 5 mol% and 10 mol% substitutions were performed, where Mg was substituted with Co, Ni, Cu and Zn, and Al with Fe. The successful synthesis of crystalline MgMAl-LDHs was confirmed using X-ray powder diffraction (XRD) analysis. Energy-dispersive X-ray (EDX) spectroscopy was used to identify substituted metals and determine changes in composition. Changes in morphology were studied using scanning electron microscopy (SEM). Thermogravimetric analysis was used to determine the effect of Fe-, Co-, Ni-, Cu- or Zn-substitution on the thermal degradation of the MgMAl-LDH phase. The structure, morphology and thermal behavior of the LDHs were shown to be influenced by the substituted transition metals. The observed thermal stability took the order MgNiAl- > MgFeAl- = MgAl- ≥ MgCoAl- > MgCuAl- > MgZnAl-LDH. The urea hydrolysis method was shown to be a simple preparation method for well-defined crystallite structures with large hexagonal platelets and good distribution of transition metal atoms in the substituted LDHs. This paper details a successful synthesis and comparison of a range of tri-metal hydrotalcite-like layered double hydroxides (LDHs) using urea hydrolysis.![]()
Collapse
Affiliation(s)
- Sajid Naseem
- Leibniz-Institut für Polymerforschung Dresden e. V
- Dresden
- Germany
| | - Bianca Gevers
- Department of Chemical Engineering
- University of Pretoria
- Pretoria
- South Africa
| | - Regine Boldt
- Leibniz-Institut für Polymerforschung Dresden e. V
- Dresden
- Germany
| | | | | |
Collapse
|