Amino-functionalized magnetic chitosan beads to enhance immobilization of potassium copper hexacyanoferrate for selective Cs+ removal and facile recovery

Cesium adsorption from an aqueous medium for environmental remediation: A comprehensive analysis of adsorbents, sources, factors, models, challenges, and opportunities

Considering the widespread and indispensable nature of nuclear energy for future power generation, there is a concurrent increase in the discharge of radioactive Cs into water streams. Recent studies have demonstrated that adsorption is crucial in removing Cs from wastewater for environmental remediation. However, the existing literature lacks comprehensive studies on various adsorption methods, the capacities or efficiencies of adsorbents, influencing factors, isotherm and kinetic models of the Cs adsorption process. A bibliometric and comprehensive analysis was conducted using 1179 publications from the Web of Science Core Collection spanning from 2014 to 2023. It reviews and summarizes current publication trends, active countries, adsorption methods, adsorption capacities or efficiencies of adsorbents, tested water sources, influencing factors, isotherm, and kinetic models of Cs adsorption. The selection of suitable adsorbents and operating parameters is identified as a crucial factor. Over the past decade, due to their notable capacity for Cs adsorption, considerable research has focused on novel adsorbents, such as Prussian blue, graphene oxide, hydrogel, and nanoadsorbents (NA). However, there remains a need for further development of application-oriented laboratory-scale experiments. Future research directions should encompass exploring adsorption mechanisms, developing new adsorbents or their combinations, practical applications of lab-scale studies, and recycling radioactive Cs from wastewater. Drawing upon this literature review, we present the most recent research patterns concerning adsorbents to remove Cs, outline potential avenues for future research, and delineate the obstacles hindering effective adsorption. This comprehensive bibliometric review provides valuable insights into prevalent research focal points and emerging trends, serving as a helpful resource for researchers and policymakers seeking to understand the dynamics of adsorbents for Cs removal from water.

Fabrication of magnetite/GO/potassium copper hexacyanoferrate nanocomposite for removal of radioactive cesium ions

Metal hexacyanoferrates (MHCF) are a class of inorganic adsorbents used for wastewater management due to the presence of interstitial sites for capturing heavy metal ions. In present work, we are reporting the synthesis of magnetic nanocomposite of Fe3O4/graphene oxide/potassium copper hexacyanoferrate via wet chemical and coprecipitation approach. Potassium copper hexacyanoferrate (KCuHCF) and Graphene oxide (GO) both are marvelous adsorbents but their nano-size becomes a major obstacle in their separation process after the adsorption of the radionuclides. Thus, our synthesized nanocomposite Fe3O4/GO/KCuHCF enhances the recovery of KCuHCF even after radioactive Cs+ adsorption with adsorption capacity of 18 mg g-1 coinciding well with the Langmuir adsorption isotherm mechanism. The synthesized adsorbent is characterized thoroughly using UV-Visible spectroscopy, FT-IR, TGA, XPS, Raman spectroscopy, TEM-EDAX and XRD. This synthesized nanocomposite is used for the batch extraction of radioactive Cs+ from low level radioactive waste (LLW). The extraction kinetics followed pseudo-second-order kinetics mechanism.

Water-based ferrofluid with tunable stability and its significance in nuclear wastewater treatment

The treatment of nuclear wastewater is one of the most urgent and arduous tasks currently, but traditional adsorption materials are significantly limited in practice due to their high demands on auxiliary operations (e.g., shaking or centrifugation) caused by poor stability or recyclability. To tackle this challenge, a water-based ferrofluid composed of magnetic nanoparticles grown in polyethylenimine branches is reported and applied to nuclear wastewater treatment. It is demonstrated that the ferrofluid can keep stable spontaneously in a wide pH range (3-11) out of their ultra-small size, strong electropositivity as well as high charge buffering capacity to achieve shaker-free adsorption, and can be magnetically separated after the neutralization of their positive charge to achieve convenient recycle. Meanwhile, it is found that the ferrofluid shows wide pH/adsorbate applicability and strong ion selectivity in radionuclides absorption. Furthermore, it is anticipated to achieve maximum adsorption capacities for U(VI), Sr(II) and Co(II) as high as 331.5, 427.8 and 759.6 mg/g, respectively. With these characteristics, this ferrofluid outperforms other reported adsorbents. In conclusion, this work provides a practical and effective radioactive wastewater treatment strategy, and enlightens the development of materials for other applications facing the dilemma of incompatible stability and recyclability.

Aspergillus tamarii mediated green synthesis of magnetic chitosan beads for sustainable remediation of wastewater contaminants

The release of different hazardous substances into the water bodies during the industrial and textile processing stages is a serious problem in recent decades. This study focuses on the potentiality of Fe3O4-NPs-based polymer in sustainable bioremediation of toxic substances from contaminated water. The biosynthesis of Fe3O4-NPs by A. tamarii was performed for the first time. The effect of different independent variables on the Fe3O4-NPs production were optimized using Plackett-Burman design and central composite design (CCD) of Response Surface Methodology. The optimum Fe3O4-NPs production was determined using incubation period (24 h), temperature (30 °C), pH (12), stirring speed (100 rpm) and stirring time (1 h). The incorporation of Fe3O4-NPs into chitosan beads was successfully performed using sol-gel method. The modified nanocomposite exhibited remarkable removal capability with improved stability and regeneration, compared to control beads. The optimal decolorization was 94.7% at 1.5 g/l after 90 min of treatment process. The reusability of biosorbent beads displayed 75.35% decolorization after the 7th cycle. The results showed a highly significant reduction of physico-chemical parameters (pH, TDS, TSS, COD, EC, and PO4) of contaminated wastewater. The sorption trials marked Fe3O4-NPs-based biopolymer as efficient and sustainable biosorbent for the elimination of hazardous toxic pollutants of wastewater in a high-speed rate.

Chitosan@Carboxymethylcellulose/CuO-Co2O3 Nanoadsorbent as a Super Catalyst for the Removal of Water Pollutants

In this work, an efficient nanocatalyst was developed based on nanoadsorbent beads. Herein, carboxymethyl cellulose-copper oxide-cobalt oxide nanocomposite beads (CMC/CuO-Co2O3) crosslinked by using AlCl3 were successfully prepared. The beads were then coated with chitosan (Cs), Cs@CMC/CuO-Co2O3. The prepared beads, CMC/CuO-Co2O3 and Cs@CMC/CuO-Co2O3, were utilized as adsorbents for heavy metal ions (Ni, Fe, Ag and Zn). By using CMC/CuO-Co2O3 and Cs@CMC/CuO-Co2O3, the distribution coefficients (Kd) for Ni, Fe, Ag and Zn were (41.166 and 6173.6 mLg-1), (136.3 and 1500 mLg-1), (20,739.1 and 1941.1 mLg-1) and (86.9 and 2333.3 mLg-1), respectively. Thus, Ni was highly adsorbed by Cs@CMC/CuO-Co2O3 beads. The metal ion adsorbed on the beads were converted into nanoparticles by treating with reducing agent (NaBH4) and named Ni/Cs@CMC/CuO-Co2O3. Further, the prepared nanoparticles-decorated beads (Ni/Cs@CMC/CuO-Co2O3) were utilized as nanocatalysts for the reduction of organic and inorganic pollutants (4-nitophenol, MO, EY dyes and potassium ferricyanide K3[Fe(CN)6]) in the presence of NaBH4. Among all catalysts, Ni/Cs@CMC/CuO-Co2O3 had the highest catalytic activity toward MO, EY and K3[Fe(CN)6], removing up to 98% in 2.0 min, 90 % in 6.0 min and 91% in 6.0 min, respectively. The reduction rate constants of MO, EY, 4-NP and K3[Fe(CN)6] were 1.06 × 10-1, 4.58 × 10-3, 4.26 × 10-3 and 5.1 × 10-3 s-1, respectively. Additionally, the catalytic activity of the Ni/Cs@CMC/CuO-Co2O3 beads was effectively optimized. The stability and recyclability of the beads were tested up to five times for the catalytic reduction of MO, EY and K3[Fe(CN)6]. It was confirmed that the designed nanocomposite beads are ecofriendly and efficient with high strength and stability as catalysts for the reduction of organic and inorganic pollutants.

Assessing of cesium removal from wastewater using functionalized wood cellulosic adsorbent

Sustainable materials are urgently desired for treatment of radioactive cesium (Cs) contaminated water to safe-guard the public health. Apart from the synthetic ligand-based materials, the Mangrove charcoal modified adsorbent was fabricated for assessing of Cs removal from waste sample. The raw charcoal was oxidized using nitrification approach and diverse oxygen containing carboxyl, carbonyl and hydroxyl functional groups were introduced. After modification, the adsorbent characteristics were drastically changed as compared to the charcoal during the measurement of FTIR, N₂ adsorption-desorption isotherms and SEM micrographs. The data clarified that charcoal modified adsorbent was exhibited high Cs transport through the inner surface of the adsorbent based on bonding ability. The adsorbent was shown comparatively slow kinetics to Cs ion; however, the adsorption capacity was high as 133.54 mg/g, which was higher than the crown ether based conjugate materials. The adsorption data were followed to the Langmuir adsorption isotherms and the monolayer coverage was possible due to the data presentation. The presence of high amount of Na and K were slightly interfered to the Cs adsorption by the charcoal modified adsorbent, however; the Na and K concentration was 350-600 folds higher than the Cs concentration. Then the proposed adsorbent was selective to Cs for the potential real radioactive Cs contaminated water. The volume reduction was established rather than desorption and reuses advantages. More than 99% volume reduction was measured by burning of Cs adsorbed adsorbent at 500 °C for ensuring the safe storage and disposal of used adsorbent. Therefore, the charcoal modified adsorbent may open the new door to treat the Cs containing wastewater.

Adsorptive seawater desalination using MOF-incorporated Cu-alginate/PVA beads: Ion removal efficiency and durability

With the worsening water scarcity problem, seawater desalination has been receiving gradually increasing attention. Ion adsorptive desalination was introduced as one of the seawater desalination techniques. In our previous study, metal-organic framework (MOF)-incorporated single-network alginate (MOF-Alg(Cu)) beads were used to adsorb ions in seawater. In the present study, MOF-incorporated Cu-based alginate/PVA hydrogel (MOF-Alg(Cu)/PVA) beads were fabricated to enhance the ion adsorption desalination technique. Cu-based MOFs were successfully synthesized in situ on an interpenetrating polymer network (IPN). Given that the IPN hydrogel beads have high stability, the amount of MOF particles extracted during the adsorption of ions is reduced. The fabricated MOF-Alg(Cu)/PVA beads exhibit efficient removal of dissolved ions in artificial seawater and NaCl solution with varied concentrations. The ion adsorption characteristics were evaluated on the basis of adsorption kinetics, adsorption isotherms, and dosage of adsorbent. The repeat cycle tests show that more than half of the ion removal efficiency was maintained after 10 cycle tests. The concentration of artificial seawater was reduced to 1500 ppm by employing MOF-Alg(Cu)/PVA beads through a multistage experiment. Compared with other seawater desalination techniques, the proposed adsorptive desalination technique using MOF-Alg(Cu)/PVA beads will pave the way for developing a new ecofriendly and energy-saving approach.

Effective removal of cesium from wastewater via adsorptive filtration with potassium copper hexacyanoferrate-immobilized and polyethyleneimine-grafted graphene oxide

As an attractive alternative to radioactive cesium removal, we introduced an adsorptive filtration method using a composite membrane consisting of potassium copper hexacyanoferrate (KCuHCF) and graphene-based support. Polyethyleneimine-grafted reduced graphene oxide (PEI-rGO), used as an immobilizing matrix, was effective not only in distributing KCuHCF inside the composite with the aid of abundant amino-functionality, but also in achieving high water flux by increasing the interlayer spacing of the laminar membrane structure. Due to the rapid and selective cesium adsorption properties of KCuHCF, the fabricated membrane was found to be effective in achieving complete removal of cesium ions under a high flux (over 500 L m^-2 h^-1), which is difficult in a conventional membrane utilizing the molecular sieving effect. This approach offers strong potential in the field of elimination of radionuclides that require rapid and complete decontamination.

Chitosan functionalized magnetic graphene oxide nanocomposite for the sensitive and effective determination of alkaloids in hotpot

Chitosan functionalized magnetic graphene oxide nanocomposite (Fe₃O₄@SiO₂@CS/GO) was successfully fabricated via a facile amide reaction between chitosan and graphene oxide. A novel extraction method using Fe₃O₄@SiO₂@CS/GO as nanoadsorbent was developed and applied to the efficient extraction and determination of multiple alkaloids from the complex matrix. The composition and structure of the nanoadsorbent was systematically characterized by various techniques. The nanoadsorbent possesses performances of high efficiency, easy operation, superparamagnetism, environment friendly and economic feasibility. The adsorption mechanism for alkaloids included π-π electron-donor-acceptor interaction, cation-π interaction and hydrogen bonding. The principal parameters influencing extraction procedure such as adsorbent dosage, pH, adsorption time, desorption conditions and regeneration cycles were investigated and optimized. Under the optimized conditions, the method exhibited good linear dynamic range with correlation coefficient (r²) higher than 0.997 and the limit of detection (LOD) was among 0.016--0.092 μg kg^-1. Intra- and inter-day relative standard deviations (RSDs) were <10%. These results indicated that the developed method was successfully applied for simultaneous detection of alkaloids in hotpot. This study provided valuable guidance and effective method for the analysis of alkaloids in intricate interference system.