Ultra-high adsorption of cationic methylene blue on two dimensional titanate nanosheets

Facet-controlled growth and soft-chemical exfoliation of two-dimensional titanium dioxide nanosheets

TiO2 remains one of the most popular materials used in catalysts, photovoltaics, coatings, and electronics due to its abundance, chemical stability, and excellent catalytic properties. The tailoring of the TiO2 structure into two-dimensional nanosheets prompted the successful isolation of graphene and MXenes. In this review, facet-controlled TiO2 and monolayer titanate are outlined, covering their synthesis route and formation mechanism. The reactive facet of TiO2 is usually controlled by a capping agent. In contrast, the monolayer titanate is achieved by ion-exchange and delamination of layered titanates. Each route leads to 2D structures with unique physical and chemical properties, which expands its utilisation into several niche applications. We elaborate the detailed outlook for the future use and research studies of facet-controlled TiO2 and monolayer titanates. Advantages and disadvantages of both structures are provided, along with suggested applications for each type of 2D TiO2 nanosheets.

A sorbent containing pH-responsive chelating residues of aspartic and maleic acids for mitigation of toxic metal ions, cationic, and anionic dyes

t-Butyl hydroperoxide-initiated cycloterpolymerization of diallylaminoaspartic acid hydrochloride [(CH2[double bond, length as m-dash]CHCH2)2NH+CH(CO2H)CH2CO2H Cl-] (I), maleic acid (HO2CH[double bond, length as m-dash]CHCO2H) (II) and cross-linker tetraallylhexane-1,6-diamine dihydrochloride [(CH2[double bond, length as m-dash]CHCH2)2NH+(CH2)6NH+ (CH2CH[double bond, length as m-dash]CH2)2 2Cl-] (III) afforded a new pH-responsive resin (IV), loaded with four CO2H and a chelating motif of NH+⋯CO2 - in each repeating unit. The removal of cationic methylene blue (MB) (3000 ppm) at pH 7.25 and Pb(ii) (200 ppm) at pH 6 by IV at 298, 313, and 328 K followed second-order kinetics with E a of 33.4 and 40.7 kJ mol-1, respectively. Both MB and Pb(ii) were removed fast, accounting for 97.7% removal of MB within 15 min at 313 K and 94% of Pb(ii) removal within 1 min. The super-adsorbent resin gave respective q max values of 2609 mg g-1 and 873 mg g-1 for MB and Pb(ii). IV was also found to trap anionic dyes; it removed 91% Eriochrome Black T (EBT) from its 50 ppm solutions at pH 2. The resin was found to be effective in reducing priority metal contaminants (like Cr, Hg, Pb) in industrial wastewater to sub-ppb levels. The synthesis of the recyclable resin can be easily scaled up from inexpensive starting materials. The resin has been found to be better than many recently reported sorbents.

Photocatalytic degradation of MB by TiO2: studies on recycle and reuse of photocatalyst and treated water for seed germination

Photocatalysis is an effective way for treatment of wastewater and degradation of dyes. It is important to assess the reusability of photocatalyst and treated water after the treatment process. In this study, the photocatalytic activity of TiO₂ (titanium dioxide) and TiO₂-TMAOH (titanium dioxide-tetramethylammonium hydroxide) was analyzed for degradation of methylene blue dye. Enhanced degradation of methylene blue is observed while treated with TiO₂-TMAOH with photodegradation efficiency (PDE) 80% within 20 min. A further study shows the reusability of TiO₂ for degradation of dye for six cycles with a decrease in photodegradation efficiency from 90% (cycle-1) to 50% (cycle-2). Fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDX), and cyclic voltammetry (CV) analysis were carried out to identify the functional groups in treated water, traces of titanium, and TMAOH, respectively. Seed germination of Vigna radiata using TiO₂- and TiO₂-TMAOH-treated water shows equivalent and consistent growth. Water quality analysis of treated water shows improved biochemical oxygen demand (BOD) level (1.5 mg L^-1), which is suitable for reusability of water for many applications. The outcomes suggest treated water can be used for irrigation and plantation purposes.

High-capacity adsorbents from stainless steel slag for the control of dye pollutants in water

Adsorbent materials for the control of dye pollutants in water were synthetized from stainless steel slag (SSS) using different acid-base treatments. Using HCl (SS-Cl) and HNO3 (SS-NO3) produced high-capacity adsorbents, with BET areas of 232 m2/g and 110 m2/g respectively. Specifically, the SS-Cl had a structure of amorphous silica sponge. Treatment with H2SO4 (SS-SO4) did not enhance the adsorption capabilities with respect to the raw sample (SSS). Activated carbon (AC) was also tested as reference. The materials were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), N2 adsorption-desorption isotherms, scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) zeta potential, and infrared spectroscopy (FTIR). Batch adsorption experiments with methylene blue (MB) showed that the maximum sorption capacities were 9.35 mg/g and 8.97 mg/g for SS-Cl and SS-NO3 at 240 h, respectively. These values, even at slower rate, were close to the adsorption capacity of the AC (9.72 mg/g). This behavior has been attributed to the high porosity in the range of nanopores (0.6-300 nm) and the high-surface area for both samples. Preferential involvement of certain functional groups in the adsorption of dye ions on their surface indicative of chemisorption has been found. Although optimization, repeatability, and reproducibility of the process and environmental assessment have to be done before practical applications, these preliminary results indicate that application of these cost-effective adsorbents from raw SSS may be used in water pollution treatment and contribute to the sustainable development of the steel manufacturing industry.

Design and Synthesis of a Dual-Purpose Superadsorbent Containing a High Density of Chelating Motifs for the Fast Mitigation of Methylene Blue and Pb(II)

Maleic acid underwent alternate copolymerization with diallylaminomethylphosphonic acid·HCl [(CH2=CHCH2)2NH+CH2PO3H2 Cl-] and a cross-linker to give a new pH-responsive resin. Methylene blue (MB) removal from its 3000 ppm solution by the resin at pH 7 followed second-order kinetics with an E a of 34.8 kJ mol-1. MB removal was achieved very fast (10 min), attaining over 98.5% at 328 K. The q e obtained using MB concentrations in the range 100-8000 ppm fitted the Langmuir nonlinear isotherm model to give ΔG o, ΔH o, and ΔS o values of ≈ -21 kJ, 36.5 kJ mol-1, and 185 J mol-1 K-1, respectively. The resin is a superadsorbent with a q max value of 2445 mg g-1. The adsorbent also removed 97% Pb(II) within 5 min from its 10 000 ppb solution. The resin reduced the Pb(II) concentration from 200 to 3.8 ppb. The resin also demonstrated its ability to remove contaminants from industrial wastewater, reducing priority metal contaminants to ppb and sub-ppb levels. The resin can be recycled with stable efficiency. The outstanding performance places the resin in a top position in a list of recently reported sorbents.

Controlled Fabrication of K2Ti8O17 Nanowires for Highly Efficient and Ultrafast Adsorption toward Methylene Blue

Advanced adsorbents need high adsorption rate and superior adsorption capability to clean up organic methylene blue (MB) from wastewater. We prepared K₂Ti₈O₁₇ nanowires grown along the [0 1 0] direction with a one-step hydrothermal method. The K₂Ti₈O₁₇ nanowires with tens of nanometers in diameter and tens of micrometers in length were achieved with smooth surfaces and twisted wire-like morphology. The K₂Ti₈O₁₇ nanowires exhibit high uptake capacity of ∼208.8 mg·g^-1 in the MB removal under equilibrium pH = 7. The adsorption equilibrium of MB onto the K₂Ti₈O₁₇ adsorbent is achieved with a 97% removal rate of MB within only ∼21 min, which is the shortest adsorption time among the recently reported inorganic adsorbents toward MB. The adsorption process has a good agreement with the well-known pseudo-second-order kinetic model (k₂ = 0.2) and the Langmuir isotherm model. Fourier transform infrared measurements suggest that the adsorption can be assigned to the hydrogen bonding and electrostatic attraction between MB and K₂Ti₈O₁₇. This ultrafast removal ability is due to the larger (0 2 0) interplanar spacing and zigzag surface structure of the nanowires, which provide abundant active adsorption sites. Thermodynamic parameters reflect the spontaneous, exothermic, and feasible uptake of MB. Besides, K₂Ti₈O₁₇ nanowires enjoy high adsorptive ability for chromium(VI) ions and photocatalytic removal toward NO. This work highlights the great significance of K₂Ti₈O₁₇ nanowires as a low-cost promising material used for the adsorptive elimination of organic contaminations in fast water purification on a large scale.