The chemical identity, state and structure of catalytically active centers during the electrochemical CO2 reduction on porous Fe-nitrogen-carbon (Fe-N-C) materials

Electrochemical CO2 Activation and Valorization on Metallic Copper and Carbon-Embedded N-Coordinated Single Metal MNC Catalysts

The electrochemical reductive valorization of CO2, referred to as the CO2RR, is an emerging approach for the conversion of CO2-containing feeds into valuable carbonaceous fuels and chemicals, with potential contributions to carbon capture and use (CCU) for reducing greenhouse gas emissions. Copper surfaces and graphene-embedded, N-coordinated single metal atom (MNC) catalysts exhibit distinctive reactivity, attracting attention as efficient electrocatalysts for CO2RR. This review offers a comparative analysis of CO2RR on copper surfaces and MNC catalysts, highlighting their unique characteristics in terms of CO2 activation, C1/C2(+) product formation, and the competing hydrogen evolution pathway. The assessment underscores the significance of understanding structure-activity relationships to optimize catalyst design for efficient and selective CO2RR. Examining detailed reaction mechanisms and structure-selectivity patterns, the analysis explores recent insights into changes in the chemical catalyst states, atomic motif rearrangements, and fractal agglomeration, providing essential kinetic information from advanced in/ex situ microscopy/spectroscopy techniques. At the end, this review addresses future challenges and solutions related to today's disconnect between our current molecular understanding of structure-activity-selectivity relations in CO2RR and the relevant factors controlling the performance of CO2 electrolyzers over longer times, with larger electrode sizes, and at higher current densities.

Modulating the Structure and Composition of Single-Atom Electrocatalysts for CO2 reduction

Electrochemical CO2 reduction reaction (eCO2 RR) is a promising strategy to achieve carbon cycling by converting CO2 into value-added products under mild reaction conditions. Recently, single-atom catalysts (SACs) have shown enormous potential in eCO2 RR due to their high utilization of metal atoms and flexible coordination structures. In this work, the recent progress in SACs for eCO2 RR is outlined, with detailed discussions on the interaction between active sites and CO2 , especially the adsorption/activation behavior of CO2 and the effects of the electronic structure of SACs on eCO2 RR. Three perspectives form the starting point: 1) Important factors of SACs for eCO2 RR; 2) Typical SACs for eCO2 RR; 3) eCO2 RR toward valuable products. First, how different modification strategies can change the electronic structure of SACs to improve catalytic performance is discussed; Second, SACs with diverse supports and how supports assist active sites to undergo catalytic reaction are introduced; Finally, according to various valuable products from eCO2 RR, the reaction mechanism and measures which can be taken to improve the selectivity of eCO2 RR are discussed. Hopefully, this work can provide a comprehensive understanding of SACs for eCO2 RR and spark innovative design and modification ideas to develop highly efficient SACs for CO2 conversion to various valuable fuels/chemicals.

Gaining Deep Understanding of Electrochemical CO2 RR with In Situ/Operando Techniques

Electrocatalysis for CO2 conversion has been extensively studied to mitigate the energy shortage and environmental issues, which are gaining ever-increasing attention. However, the complicated CO2 reduction process and the dynamic evolution occurring on electrocatalyst surface make it hard to understand the catalytic mechanism. The development of advanced in situ/operando techniques intelligently coupled with electrochemical cells sheds light on the related study via capturing surface atomic rearrangement, tracing chemical state change of catalysts, monitoring the behavior of intermediates and products, and depicting microenvironment near the electrode surface. In this review, fundamentals of the state-of-the-art in situ/operando techniques are clarified first. Case studies on the in situ/operando techniques performed to probe the CO2 reduction reaction processes are then discussed in detail. Finally, conclusions and outlook on this field are presented.

Elucidating electrochemical nitrate and nitrite reduction over atomically-dispersed transition metal sites

Electrocatalytic reduction of waste nitrates (NO₃^-) enables the synthesis of ammonia (NH₃) in a carbon neutral and decentralized manner. Atomically dispersed metal-nitrogen-carbon (M-N-C) catalysts demonstrate a high catalytic activity and uniquely favor mono-nitrogen products. However, the reaction fundamentals remain largely underexplored. Herein, we report a set of 14; 3d-, 4d-, 5d- and f-block M-N-C catalysts. The selectivity and activity of NO₃^- reduction to NH₃ in neutral media, with a specific focus on deciphering the role of the NO₂^- intermediate in the reaction cascade, reveals strong correlations (R=0.9) between the NO₂^- reduction activity and NO₃^- reduction selectivity for NH₃. Moreover, theoretical computations reveal the associative/dissociative adsorption pathways for NO₂^- evolution, over the normal M-N₄ sites and their oxo-form (O-M-N₄) for oxyphilic metals. This work provides a platform for designing multi-element NO₃RR cascades with single-atom sites or their hybridization with extended catalytic surfaces.

Structural and Reactivity Effects of Secondary Metal Doping into Iron-Nitrogen-Carbon Catalysts for Oxygen Electroreduction

While improved activity was recently reported for bimetallic iron-metal-nitrogen-carbon (FeMNC) catalysts for the oxygen reduction reaction (ORR) in acid medium, the nature of active sites and interactions between the two metals are poorly understood. Here, FeSnNC and FeCoNC catalysts were structurally and catalytically compared to their parent FeNC and SnNC catalysts. While CO cryo-chemisorption revealed a twice lower site density of M-N_x sites for FeSnNC and FeCoNC relative to FeNC and SnNC, the mass activity of both bimetallic catalysts is 50-100% higher than that of FeNC due to a larger turnover frequency in the bimetallic catalysts. Electron microscopy and X-ray absorption spectroscopy identified the coexistence of Fe-N_x and Sn-N_x or Co-N_x sites, while no evidence was found for binuclear Fe-M-N_x sites. ⁵⁷Fe Mössbauer spectroscopy revealed that the bimetallic catalysts feature a higher D1/D2 ratio of the spectral signatures assigned to two distinct Fe-N_x sites, relative to the FeNC parent catalyst. Thus, the addition of the secondary metal favored the formation of D1 sites, associated with the higher turnover frequency.

Hollow Nitrogen-Doped porous carbon spheres decorated with atomically dispersed Ni-N3 sites for efficient electrocatalytic CO2 reduction

Hollow nitrogen-doped porous carbon spheres (HNCS) with plentiful coordination N sites, high surface area, and superior electrical conductivity are ideal catalyst supports due to their easily access of reactants to active sites and excellent stability. To date, nevertheless, little has been reported on HNCS as supports to metal-single-atomic sites for CO₂ reduction (CO₂R). Here we report our findings in preparation of nickel-single-atom catalysts anchored on HNCS (Ni SAC@HNCS) for highly efficient CO₂R. The obtained Ni SAC@HNCS catalyst exhibits excellent activity and selectivity for the electrocatalytic CO₂-to-CO conversion, achieving a Faradaic efficiency (FE) of 95.2% and a partial current density of 20.2 mA cm^-2. When applied to a flow cell, the Ni SAC@HNCS delivers above 95% FE_CO over a wide potential range and a peak FE_CO of 99%. Further, there is no obvious degradation in FE_CO and the current for CO production during continuous electrocatalysis of 9 h, suggesting good stability of Ni SAC@HNCS.

Guanosine-derived atomically dispersed Cu-N3-C sites for efficient electroreduction of carbon dioxide

Single-atom copper (Cu) embedded within carbon catalysts have demonstrated significant potential in the electrochemical reduction of carbon dioxide (CO₂) into valuable chemicals and fuels. Herein, we develop a straightforward and template-free strategy for synthesizing atomically dispersed CuNC catalysts (CuG) by annealing the self-assembled guanosine. The CuG catalysts display two-dimensional morphology, tunable pore size and large surface areas that can be adjusted by changing carbonization temperature. Spherical aberration-corrected transmission electron microscopy reveals that single-atom Cu are homogeneously dispersed on the surface of carbon nanosheets. The optimum CuG-1000 catalysts achieve a high CO Faradaic efficiency (FE_co) up to 99% and a high CO current density of 6.53 mA cm^-2 (-0.65 V vs. RHE). Besides, the flow cell test of CuG-1000 shows a high current density up to 25.2 mA cm^-2 and the FE_co still exceeded 91% after more than 20 h of testing. Specifically, the existence of Cu-N₃-C active sites was proved by extended X-ray absorption fine structure (EXAFS). Density functional theory evidences that tricoordinated copper with N can largely regulate the adsorption and desorption of key intermediates by transferring electrons to *COOH through Cu atoms, thereby improving selectivity toward CO. This work demonstrates the active origin of CuNC catalysts in CO₂ electroreduction and offers a blueprint to construct atomically dispersed transition site catalysts by supramolecular self-assembly strategy.

Regulating the d-band electrons of the Fe-N-C single-atom catalyst for high-efficiency CO2 electroreduction by electron-donating S-doping

Developing highly efficient electrocatalysts is crucially significant for the application of advanced energy conversion. The Fe-N-C single-atom catalyst is promising for CO₂ electroreduction reaction (CO₂RR) but suffers from insufficient intrinsic activity and inferior conductivity, which could be addressed by redistributing the electron density via heteroatom doping. Herein, we synthesized S-doped Fe-N-C (Fe-SN-C) as an advanced electrocatalyst for CO₂RR using a simple trapping-pyrolysis strategy. Density functional theory calculations and experimental results indicate that S doping increases the d-band electrons and conductivity of Fe-SN-C by electron donating, and thus boosts *CO desorption during the CO₂RR process and suppresses the competing hydrogen evolution reaction. Consequently, Fe-SN-C exhibits the maximum CO faradaic efficiency of 93% at -0.5 V and the highest partial current density of 10.1 mA cm^-2 at -0.8 V for 2e^- CO₂RR. This finding provides a feasible and controllable method to achieve advanced electrocatalysts for efficient energy conversion.

Two-Dimensional Fe-N-C Single-Atomic-Site Catalysts with Boosted Peroxidase-Like Activity for a Sensitive Immunoassay

Single-atomic-site catalysts (SASCs) with peroxidase (POD)-like activities have been widely used in various sensing platforms, like the enzyme-linked immunosorbent assay (ELISA). Herein, a two-dimensional Fe-N-C-based SASC (2D Fe-SASC) is successfully synthesized with excellent POD-like activity (specific activity = 90.11 U/mg) and is used to design the ELISA for herbicide detection. The 2D structure of Fe-SASC enables the exposure of numerous single atomic active sites on the surface as well as boosts the POD-like activity, thereby enhancing the sensing performance. 2D Fe-SASC is assembled into competitive ELISA kit, which achieves an excellent detection performance for 2,4-dichlorophenoxyacetic acid (2,4-D). Fe-SASC has great potential in replacing high-cost natural enzymes and working on various advanced sensing platforms with high sensitivity for the detection of various target biomarkers.

Electrocatalysis Mechanism and Structure-Activity Relationship of Atomically Dispersed Metal-Nitrogen-Carbon Catalysts for Electrocatalytic Reactions

Atomically dispersed metal-nitrogen-carbon catalysts (M-N-C) have been widely used in the field of energy conversion, which has already attracted a huge amount of attention. Due to their unsaturated d-band electronic structure of the center atoms, M-N-C catalysts can be applied in different electrocatalytic reactions by adjusting their own microscopic electronic structures to achieve the optimization of the structure-activity relationship. Consequently, it is of great significance for the revelation of electrocatalytic mechanism and structure-activity relationship of M-N-C catalysts. Thus, this review first introduces the relative research methods, including in situ/operando characterization techniques and theoretical calculation methods. Furthermore, clarifying the electrocatalytic mechanism and structure-activity relationship of M-N-C catalysts in different electrochemical energy conversion reactions is focused. Moreover, the future research directions are pointed out based on the discussion. This review will provide good guidance to systematically study the catalytic mechanism of single-atom catalysts and reasonably design the single-atom catalysts.

Design of Single-Atom Catalysts and Tracking Their Fate Using Operando and Advanced X-ray Spectroscopic Tools

The potential of operando X-ray techniques for following the structure, fate, and active site of single-atom catalysts (SACs) is highlighted with emphasis on a synergetic approach of both topics. X-ray absorption spectroscopy (XAS) and related X-ray techniques have become fascinating tools to characterize solids and they can be applied to almost all the transition metals deriving information about the symmetry, oxidation state, local coordination, and many more structural and electronic properties. SACs, a newly coined concept, recently gained much attention in the field of heterogeneous catalysis. In this way, one can achieve a minimum use of the metal, theoretically highest efficiency, and the design of only one active site-so-called single site catalysts. While single sites are not easy to characterize especially under operating conditions, XAS as local probe together with complementary methods (infrared spectroscopy, electron microscopy) is ideal in this research area to prove the structure of these sites and the dynamic changes during reaction. In this review, starting from their fundamentals, various techniques related to conventional XAS and X-ray photon in/out techniques applied to single sites are discussed with detailed mechanistic and in situ/operando studies. We systematically summarize the design strategies of SACs and outline their exploration with XAS supported by density functional theory (DFT) calculations and recent machine learning tools.

Activation of H2O Tailored by Interfacial Electronic States at a Nanoscale Interface for Enhanced Electrocatalytic Hydrogen Evolution

Despite the fundamental and practical significance of the hydrogen evolution reaction (HER), the reaction kinetics at the molecular level are not well-understood, especially in basic media. Here, with ZIF-67-derived Co-based carbon frameworks (Co/NCs) as model catalysts, we systematically investigated the effects of different reaction parameters on the HER kinetics and discovered that the HER activity was directly dependent not on the type of nitrogen in the carbon framework but on the relative content of surface hydroxyl and water (OH-/H2O) adsorbed on Co active sites embedded in carbon frameworks. When the ratio of the OH-/H2O was close to 1:1, the Co/NC nanocatalyst showed the best reaction performance under the condition of high-pH electrolytes, e.g., an overpotential of only 232 mV at a current density of 10 mA cm-2 in the 1 M KOH electrolyte. We unambiguously identified that the structural water molecules (SWs) in the form of hydrous hydroxyl complexes absorbed on metal centers {OHad·H2O@M+} were catalytic active sites for the enhanced HER, where M+ could be transition or alkaline metal cations. Different from the traditional hydrogen bonding of water, the hydroxyl (hydroxide) groups and water molecules in the SWs were mainly bonded together via the spatial interaction between the p orbitals of O atoms, exhibiting features of a delocalized π-bond with a metastable state. These newly formed surface bonds or transitory states could be new weak interactions that synergistically promote both interfacial electron transfer and the activation of water (dissociation of O-H bonds) at the electrode surface, i.e., the formation of activated H adducts (H*). The capture of new surface states not only explains pH-, cation-, and transition-metal-dependent hydrogen evolution kinetics but also provides completely new insights into the understanding of other electrocatalytic reductions involving other small molecules, including CO2, CO, and N2.

Covalent Organic Framework (COF) Derived Ni‐N‐C Catalysts for Electrochemical CO 2 Reduction: Unraveling Fundamental Kinetic and Structural Parameters of the Active Sites

Electrochemical CO₂ reduction is a potential approach to convert CO₂ into valuable chemicals using electricity as feedstock. Abundant and affordable catalyst materials are needed to upscale this process in a sustainable manner. Nickel‐nitrogen‐doped carbon (Ni‐N‐C) is an efficient catalyst for CO₂ reduction to CO, and the single‐site Ni−N_x motif is believed to be the active site. However, critical metrics for its catalytic activity, such as active site density and intrinsic turnover frequency, so far lack systematic discussion. In this work, we prepared a set of covalent organic framework (COF)‐derived Ni‐N‐C catalysts, for which the Ni−N_x content could be adjusted by the pyrolysis temperature. The combination of high‐angle annular dark‐field scanning transmission electron microscopy and extended X‐ray absorption fine structure evidenced the presence of Ni single‐sites, and quantitative X‐ray photoemission addressed the relation between active site density and turnover frequency.

Holdups in Nitride MXene's Development and Limitations in Advancing the Field of MXene

As nanomaterials are becoming a key component in various electronics, 2D nanomaterials are emerging and attracting tremendous attention in the scientific community due to their unique physical, chemical, and structural properties. In recent years, a new family of 2D carbides and nitrides, known as MXenes, has become the center of attention for many electrochemical energy storage and conversion systems. While nitride MXenes have some publications centered around them, the overwhelming majority revolve around carbide and their direct application to systems without understanding the underlying mechanism behind their performance. The lack of publications in both of these fields, nitrides and mechanistic understanding, causes a major stopgap in MXene research and needs to be remedied in order to truly utilize their potential for future electronics and energy conversion systems. In this work, the limited works on nitride MXenes and the applications of in situ/operando characterization techniques in understanding the underlying mechanisms of energy storage and conversion in MXenes are reviewed, major progress and remaining challenges in both fields are identified, recommendations on how to circumvent the challenges and limitations are provided, and finally, new research directions that must be performed to advance the field of 2D carbide and nitride MXenes are proposed.

Strong Correlation between the Dynamic Chemical State and Product Profile of Carbon Dioxide Electroreduction

Utilizing renewable electricity energy to convert CO2 into fuels and chemicals, namely, CO2 electrocatalytic reduction reaction (CO2RR), is becoming increasingly significant yet challenged by low activity and selectivity. Recently, a growing number of studies have demonstrated that oxidized species can surprisingly survive on the catalyst surface under highly cathodic CO2RR conditions and play crucial roles in affecting the product selectivity. However, dynamic evolutions of the surface chemical state together with its real correlation to the product selectivity are still unclear, which is one of the most controversial topics for CO2RR. Herein, we particularly resurvey recent CO2RR researches that are all based on advanced in situ/operando methodologies, aiming to clearly reveal the realistic variations in surface chemical state under the working conditions. Then, recent progress in the regulation of the surface chemical state toward specific CO2RR products in current state-of-the-art catalysts with varying metal centers is systematically summarized, which shows an impressive relation between the dynamic chemical state and product profile. Next, we further highlight the developed strategies to regulate the surface chemical state in catalysts and discuss the debates over the effects of chemical state on product profile during CO2RR. Finally, on the basis of previous achievements, we present major challenges and some perspectives for the exploration of the imperative chemical state sensitivity to product profile during CO2RR.

Electrochemical Reduction of CO2 to CO over Transition Metal/N-Doped Carbon Catalysts: The Active Sites and Reaction Mechanism

Electrochemical CO2 reduction to value-added chemicals/fuels provides a promising way to mitigate CO2 emission and alleviate energy shortage. CO2 -to-CO conversion involves only two-electron/proton transfer and thus is kinetically fast. Among the various developed CO2 -to-CO reduction electrocatalysts, transition metal/N-doped carbon (M-N-C) catalysts are attractive due to their low cost and high activity. In this work, recent progress on the development of M-N-C catalysts for electrochemical CO2 -to-CO conversion is reviewed in detail. The regulation of the active sites in M-N-C catalysts and their related adjustable electrocatalytic CO2 reduction performance is discussed. A visual performance comparison of M-N-C catalysts for CO2 reduction reaction (CO2 RR) reported over the recent years is given, which suggests that Ni and Fe-N-C catalysts are the most promising candidates for large-scale reduction of CO2 to produce CO. Finally, outlooks and challenges are proposed for future research of CO2 -to-CO conversion.

Linking the Dynamic Chemical State of Catalysts with the Product Profile of Electrocatalytic CO2 Reduction

The promoted activity and enhanced selectivity of electrocatalysts is commonly ascribed to specific structural features such as surface facets, morphology, and atomic defects. However, unraveling the factors that really govern the direct electrochemical reduction of CO₂ (CO₂ RR) is still very challenging since the surface state of electrocatalysts is dynamic and difficult to predict under working conditions. Moreover, theoretical predictions from the viewpoint of thermodynamics alone often fail to specify the actual configuration of a catalyst for the dynamic CO₂ RR process. Herein, we re-survey recent studies with the emphasis on revealing the dynamic chemical state of Cu sites under CO₂ RR conditions extracted by in situ/operando characterizations, and further validate a critical link between the chemical state of Cu and the product profile of CO₂ RR. This point of view provides a generalizable concept of dynamic chemical-state-driven CO₂ RR selectivity that offers an inspiration in both fundamental understanding and efficient electrocatalysts design.

Can N, S Cocoordination Promote Single Atom Catalyst Performance in CO2 RR? Fe-N2 S2 Porphyrin versus Fe-N4 Porphyrin

Single atom catalysts (SACs) are promising electrocatalysts for CO₂ reduction reaction (CO₂ RR), in which the coordination environment plays a crucial role in intrinsic catalytic activity. Taking the regular Fe porphyrin (Fe-N₄ porphyrin) as a probe, the study reveals that the introduction of opposable S atoms into N coordination (Fe-N₂ S₂ porphyrin) allows for an appropriate electronic structural optimization on active sites. Owing to the additional orbitals around the Fermi level and the abundant Fe dz2 orbital occupation after S substitution, N, S cocoordination can effectively tune SACs and thus facilitating protonation of intermediates during CO₂ RR. CO₂ RR mechanisms lead to possible C1 products via two-, six-, and eight-electron pathways are systematically elucidated on Fe-N₄ porphyrin and Fe-N₂ S₂ porphyrin. Fe-N₄ porphyrin yields the most favorable product of HCOOH with a limiting potential of -0.70 V. Fe-N₂ S₂ porphyrin exhibits low limiting potentials of -0.38 and -0.40 V for HCOOH and CH₃ OH, respectively, surpassing those of most Cu-based catalysts and SACs. Hence, the N, S cocoordination might provide better catalytic environment than regular N coordination for SACs in CO₂ RR. This work demonstrates Fe-N₂ S₂ porphyrin as a high-performance CO₂ RR catalyst, and highlights N, S cocoordination regulation as an effective approach to fine tune high atomically dispersed electrocatalysts.

Iron-Imprinted Single-Atomic Site Catalyst-Based Nanoprobe for Detection of Hydrogen Peroxide in Living Cells

Fe-based single-atomic site catalysts (SASCs), with the natural metalloproteases-like active site structure, have attracted widespread attention in biocatalysis and biosensing. Precisely, controlling the isolated single-atom Fe-N-C active site structure is crucial to improve the SASCs' performance. In this work, we use a facile ion-imprinting method (IIM) to synthesize isolated Fe-N-C single-atomic site catalysts (IIM-Fe-SASC). With this method, the ion-imprinting process can precisely control ion at the atomic level and form numerous well-defined single-atomic Fe-N-C sites. The IIM-Fe-SASC shows better peroxidase-like activities than that of non-imprinted references. Due to its excellent properties, IIM-Fe-SASC is an ideal nanoprobe used in the colorimetric biosensing of hydrogen peroxide (H₂O₂). Using IIM-Fe-SASC as the nanoprobe, in situ detection of H₂O₂ generated from MDA-MB-231 cells has been successfully demonstrated with satisfactory sensitivity and specificity. This work opens a novel and easy route in designing advanced SASC and provides a sensitive tool for intracellular H₂O₂ detection.

Single-Atomic Site Catalyst with Heme Enzymes-Like Active Sites for Electrochemical Sensing of Hydrogen Peroxide

Heme enzymes, with the pentacoordinate heme iron active sites, possess high catalytic activity and selectivity in biosensing applications. However, they are still subject to limited catalytic stability in the complex environment and high cost for broad applications in electrochemical sensing. It is meaningful to develop a novel substitute that has a similar structure to some heme enzymes and mimics their enzyme activities. One emerging strategy is to design the Fe-N-C based single-atomic site catalysts (SASCs). The obtained atomically dispersed Fe-N_x active sites can mimic the active sites of heme enzymes effectively. In this work, a SASC (Fe-SASC/NW) is synthesized by doping single iron atoms in polypyrrole (PPy) derived carbon nanowire via a zinc-atom-assisted method. The proposed Fe-SASC/NW shows high heme enzyme-like catalytic performance for hydrogen peroxide (H₂ O₂ ) with a specific activity of 42.8 U mg^-1 . An electrochemical sensor based on Fe-SASC/NW is developed for the detection of H₂ O₂ . This sensor exhibits a wide detection concentration range from 5.0 × 10^-10 m to 0.5 m and an excellent limit of detection (LOD) of 46.35 × 10^-9 m. Such excellent catalytic activity and electrochemical sensing sensitivity are attributed to the isolated Fe-N_x active sites and their structural similarity with natural metalloproteases.

Enhanced Fenton-like efficiency by the synergistic effect of oxygen vacancies and organics adsorption on FexOy-d-g-C3N4 with Fe‒N complexation

d-g-C₃N₄-Fe composites was prepared via a self-assembly and calcination process. According to measurements and density functional theory (DFT) computations, the complexation of iron and pyridinic N of g-C₃N₄ (Fe‒N) occurred with Fe(III)-π interaction, causing more oxygen vacancies (OVs) with more electrons in iron oxides. In the catalyst air-saturated suspension, the adsorbed pollutants complexed surface Fe(III) through their hydroxyl group donated electrons to around OVs, reducing the surface Fe(III) to Fe(II) and were destructed by Fe(III)-π interaction of the complexation. The addition of H₂O₂ mainly acted as acceptor being reduced ^•OH at the OV centers, causing higher degradation rate of pollutants due to both ^•OH and the surface reaction. However, for the adsorbed hydrophobic pollutants onto the sites of peripheral structure in g-C₃N₄, H₂O₂ was mainly decomposed into O₂ by the synergistic effect of iron species and OVs. Therefore, the catalyst exhibited high Fenton-like efficiency for the degradation of hydroxyl-containing pollutants and hydrophobic pollutants mixing with the former. Our results demonstrate that the Fe(III)-π interaction could carry out the oxidation of pollutants on the catalyst surface, decreasing the consumption of H₂O₂, and the role of OVs depends on pollutant adsorption patterns.

Carbon-Supported Single Metal Site Catalysts for Electrochemical CO2 Reduction to CO and Beyond

The electrochemical CO₂ reduction reaction (CO₂ RR) is a promising strategy to achieve electrical-to-chemical energy storage while closing the global carbon cycle. The carbon-supported single-atom catalysts (SACs) have great potential for electrochemical CO₂ RR due to their high efficiency and low cost. The metal centers' performance is related to the local coordination environment and the long-range electronic intercalation from the carbon substrates. This review summarizes the recent progress on the synthesis of carbon-supported SACs and their application toward electrocatalytic CO₂ reduction to CO and other C₁ and C₂ products. Several SACs are involved, including MN_x catalysts, heterogeneous molecular catalysts, and the covalent organic framework (COF) based SACs. The controllable synthesis methods for anchoring single-atom sites on different carbon supports are introduced, focusing on the influence that precursors and synthetic conditions have on the final structure of SACs. For the CO₂ RR performance, the intrinsic activity difference of various metal centers and the corresponding activity enhancement strategies via the modulation of the metal centers' electronic structure are systematically summarized, which may help promote the rational design of active and selective SACs for CO₂ reduction to CO and beyond.

Spectroscopic discernibility of dopants and axial ligands in pyridinic FeN4 environments relevant to single-atom catalysts

Single-atom catalysts (SACs) activate small molecules, e.g. the oxygen reduction reaction is catalysed by FeNC materials. Because the nature of active site(s) in this type of SAC is unclear, spectroscopic and computational insights are needed to clarify the atomistic composition and electronic structure. Using quantum chemistry, we show that key features of [Fe{phen2A2}L]n+ complexes (A = CH, N with n = 0, A = O with n = 0, 2; L = OH-, Cl-) can be differentiated spectroscopically.

In Situ/Operando Electrocatalyst Characterization by X-ray Absorption Spectroscopy

During the last decades, X-ray absorption spectroscopy (XAS) has become an indispensable method for probing the structure and composition of heterogeneous catalysts, revealing the nature of the active sites and establishing links between structural motifs in a catalyst, local electronic structure, and catalytic properties. Here we discuss the fundamental principles of the XAS method and describe the progress in the instrumentation and data analysis approaches undertaken for deciphering X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectra. Recent usages of XAS in the field of heterogeneous catalysis, with emphasis on examples concerning electrocatalysis, will be presented. The latter is a rapidly developing field with immense industrial applications but also unique challenges in terms of the experimental characterization restrictions and advanced modeling approaches required. This review will highlight the new insight that can be gained with XAS on complex real-world electrocatalysts including their working mechanisms and the dynamic processes taking place in the course of a chemical reaction. More specifically, we will discuss applications of in situ and operando XAS to probe the catalyst's interactions with the environment (support, electrolyte, ligands, adsorbates, reaction products, and intermediates) and its structural, chemical, and electronic transformations as it adapts to the reaction conditions.

Electroreduction of Carbon Dioxide Driven by the Intrinsic Defects in the Carbon Plane of a Single Fe-N4 Site

Manipulating the in-plane defects of metal-nitrogen-carbon catalysts to regulate the electroreduction reaction of CO₂ (CO₂ RR) remains a challenging task. Here, it is demonstrated that the activity of the intrinsic carbon defects can be dramatically improved through coupling with single-atom Fe-N₄ sites. The resulting catalyst delivers a maximum CO Faradaic efficiency of 90% and a CO partial current density of 33 mA cm^-2 in 0.1 m KHCO_3. The remarkable enhancements are maintained in concentrated electrolyte, endowing a rechargeable Zn-CO₂ battery with a high CO selectivity of 86.5% at 5 mA cm^-2 . Further analysis suggests that the intrinsic defect is the active sites for CO₂ RR, instead of the Fe-N₄ center. Density functional theory calculations reveal that the Fe-N₄ coupled intrinsic defect exhibits a reduced energy barrier for CO₂ RR and suppresses the hydrogen evolution activity. The high intrinsic activity, coupled with fast electron-transfer capability and abundant exposed active sites, induces excellent electrocatalytic performance.

Enhanced Formic Acid Oxidation over SnO2-decorated Pd Nanocubes

The formic acid oxidation reaction (FAOR) is one of the key reactions that can be used at the anode of low-temperature liquid fuel cells. To allow the knowledge-driven development of improved catalysts, it is necessary to deeply understand the fundamental aspects of the FAOR, which can be ideally achieved by investigating highly active model catalysts. Here, we studied SnO₂-decorated Pd nanocubes (NCs) exhibiting excellent electrocatalytic performance for formic acid oxidation in acidic medium with a SnO₂ promotion that boosts the catalytic activity by a factor of 5.8, compared to pure Pd NCs, exhibiting values of 2.46 A mg^-1 _Pd for SnO₂@Pd NCs versus 0.42 A mg^-1 _Pd for the Pd NCs and a 100 mV lower peak potential. By using ex situ, quasi in situ, and operando spectroscopic and microscopic methods (namely, transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray absorption fine-structure spectroscopy), we identified that the initially well-defined SnO₂-decorated Pd nanocubes maintain their structure and composition throughout FAOR. In situ Fourier-transformed infrared spectroscopy revealed a weaker CO adsorption site in the case of the SnO₂-decorated Pd NCs, compared to the monometallic Pd NCs, enabling a bifunctional reaction mechanism. Therein, SnO₂ provides oxygen species to the Pd surface at low overpotentials, promoting the oxidation of the poisoning CO intermediate and, thus, improving the catalytic performance of Pd. Our SnO _x -decorated Pd nanocubes allowed deeper insight into the mechanism of FAOR and hold promise for possible applications in direct formic acid fuel cells.

Engineering Atomically Dispersed FeN4 Active Sites for CO2 Electroreduction

Atomically dispersed FeN₄ active sites have exhibited exceptional catalytic activity and selectivity for the electrochemical CO₂ reduction reaction (CO2RR) to CO. However, the understanding behind the intrinsic and morphological factors contributing to the catalytic properties of FeN₄ sites is still lacking. By using a Fe-N-C model catalyst derived from the ZIF-8, we deconvoluted three key morphological and structural elements of FeN₄ sites, including particle sizes of catalysts, Fe content, and Fe-N bond structures. Their respective impacts on the CO2RR were comprehensively elucidated. Engineering the particle size and Fe doping is critical to control extrinsic morphological factors of FeN₄ sites for optimal porosity, electrochemically active surface areas, and the graphitization of the carbon support. In contrast, the intrinsic activity of FeN₄ sites was only tunable by varying thermal activation temperatures during the formation of FeN₄ sites, which impacted the length of the Fe-N bonds and the local strains. The structural evolution of Fe-N bonds was examined at the atomic level. First-principles calculations further elucidated the origin of intrinsic activity improvement associated with the optimal local strain of the Fe-N bond.

Active Site Engineering in Porous Electrocatalysts

Electrocatalysis is at the center of many sustainable energy conversion technologies that are being developed to reduce the dependence on fossil fuels. The past decade has witnessed significant progresses in the exploitation of advanced electrocatalysts for diverse electrochemical reactions involved in electrolyzers and fuel cells, such as the hydrogen evolution reaction (HER), the oxygen reduction reaction (ORR), the CO₂ reduction reaction (CO₂ RR), the nitrogen reduction reaction (NRR), and the oxygen evolution reaction (OER). Herein, the recent research advances made in porous electrocatalysts for these five important reactions are reviewed. In the discussions, an attempt is made to highlight the advantages of porous electrocatalysts in multiobjective optimization of surface active sites including not only their density and accessibility but also their intrinsic activity. First, the current knowledge about electrocatalytic active sites is briefly summarized. Then, the electrocatalytic mechanisms of the five above-mentioned reactions (HER, ORR, CO₂ RR, NRR, and OER), the current challenges faced by these reactions, and the recent efforts to meet these challenges using porous electrocatalysts are examined. Finally, the future research directions on porous electrocatalysts including synthetic strategies leading to these materials, insights into their active sites, and the standardized tests and the performance requirements involved are discussed.

Operando NRIXS and XAFS Investigation of Segregation Phenomena in Fe-Cu and Fe-Ag Nanoparticle Catalysts during CO2 Electroreduction

Operando nuclear resonant inelastic X‐ray scattering (NRIXS) and X‐ray absorption fine‐structure spectroscopy (XAFS) measurements were used to gain insight into the structure and surface composition of FeCu and FeAg nanoparticles (NPs) during the electrochemical CO₂ reduction (CO₂RR) and to extract correlations with their catalytic activity and selectivity. The formation of a core–shell structure during CO₂RR for FeAg NPs was inferred from the analysis of the operando NRIXS data (phonon density of states, PDOS) and XAFS measurements. Electrochemical analysis of the FeAg NPs revealed a faradaic selectivity of 36 % for CO in 0.1 M KHCO₃ at −1.1 V vs. RHE, similar to that of pure Ag NPs. In contrast, a predominant selectivity towards H₂ evolution is obtained in the case of the FeCu NPs, analogous to the results obtained for pure Fe NPs, although small Cu NPs have also been shown to favor H₂ production.