Copper mediated C-H amination with oximes: en route to primary anilines

Ru(ii)-catalyzed regioselective oxidative Heck reaction with internal olefins that tolerated strongly coordinating heterocycles

The oxidative Heck reaction of strongly coordinating heterocycles with internal olefins often led to elusive reactivity and regioselectivity. Herein, by judicious choice of X-type directing groups under Ru(ii) catalysis, we achieved the regioselective oxidative Heck reaction of strongly coordinating heterocycles with sterically demanding internal olefins. It was postulated that the "match/mismatch effect" of sterically demanding internal olefins as coupling partners and subsequent kinetically favoured Michael addition or oxidative aromatization act as driving forces to facilitate the desired reactivity and site-selectivity.

Iron-catalyzed C-7 Selective NH2 Amination of Indoles

7-Aminoindoles are important synthetic intermediates to a broad range of bioactive molecules. Transition metal-catalyzed directed C-H amination is among the most straightforward route for their synthesis, whereas methods that could directly incorporate an NH2 group in a highly selective manner remains elusive. Moreover, there is still high demand for the development of earth-abundant metal catalysis for such attractive reactivity. We present here the first C-7 selective NH2 amination of indoles through a directed homolytic aromatic substitution (HAS) with iron-aminyl radical. The reaction exhibits broad substrate scope, tolerates variety of functional groups, and is readily scalable with catalyst loading down to 0.1 mol % and turnover number (TON) up to 4500.

Copper(II)-Mediated Dual Reactivity of 2-(5-Phenylisoxazol-3-yl)aniline: Directed Amination and Oxidative C(═O)─C Cleavage of Amides Enabling Direct Access to Urea Derivatives

The dual reactivity of amides fused to 2-(5-phenylisoxazol-3-yl)aniline as a directing group for the formation of urea derivatives via chemospecific cleavage of the C(═O)─C bond and C(sp2)-H amination is reported here. Employing inexpensive copper as the catalyst and O2 in air as the oxidant, this protocol exhibited broad functional group tolerance for both the transformations. Detailed mechanistic studies and DFT calculations were performed to gain insights into a plausible mechanism for the formation of urea derivatives.

Copper-promoted ortho-directed C-H amination of 2-arylpyridines with NH-heterocycles

Copper-mediated C-N coupling of azaheterocycles with aryl C-H bonds has been realized for the synthesis of N-(hetero)arylated heteroarenes. This method is characterized by high regioselectivity, atom economy and a wide substrate scope of 2-arylazines and azaheterocycles. The corresponding C-N coupling products were shown to undergo further transformation to synthesize more complex molecules.

Late-stage modification of bioactive compounds: Improving druggability through efficient molecular editing

Synthetic chemistry plays an indispensable role in drug discovery, contributing to hit compounds identification, lead compounds optimization, candidate drugs preparation, and so on. As Nobel Prize laureate James Black emphasized, "the most fruitful basis for the discovery of a new drug is to start with an old drug"1. Late-stage modification or functionalization of drugs, natural products and bioactive compounds have garnered significant interest due to its ability to introduce diverse elements into bioactive compounds promptly. Such modifications alter the chemical space and physiochemical properties of these compounds, ultimately influencing their potency and druggability. To enrich a toolbox of chemical modification methods for drug discovery, this review focuses on the incorporation of halogen, oxygen, and nitrogen-the ubiquitous elements in pharmacophore components of the marketed drugs-through late-stage modification in recent two decades, and discusses the state and challenges faced in these fields. We also emphasize that increasing cooperation between chemists and pharmacists may be conducive to the rapid discovery of new activities of the functionalized molecules. Ultimately, we hope this review would serve as a valuable resource, facilitating the application of late-stage modification in the construction of novel molecules and inspiring innovative concepts for designing and building new drugs.

Ortho-Selective amination of arene carboxylic acids via rearrangement of acyl O-hydroxylamines

Direct amination of arene C-H bonds is an attractive disconnection to form aniline-derived building blocks. This transformation presents significant practical challenges; classical methods for ortho-selective amination require strongly acidic or forcing conditions, while contemporary catalytic processes often require bespoke directing groups and/or precious metal catalysis. We report a mild and procedurally straightforward ortho-selective amination of arene carboxylic acids, arising from a facile rearrangement of acyl O-hydroxylamines without requiring precious metal catalysts. A broad scope of benzoic acid substrates are compatible and the reaction can be applied to longer chain arene carboxylic acids. Mechanistic studies probe the specific requirement for trifluoroacetic acid in generating the active aminating agent, and suggest that two separate mechanisms may be operating in parallel in the presence of an iron catalyst: (i) an iron-nitrenoid intermediate and (ii) a radical chain pathway. Regardless of which mechanism is followed, high ortho selectivity is obtained, proposed to arise from the directivity (first) or attractive interactions (second) arising with the carboxylic acid motif.

Ammonia surrogates in the synthesis of primary amines

Primary amines are derivatives of ammonia in which one hydrogen atom is replaced by an alkyl or aryl group. Ammonia serves as the primary nitrogen source in amination reactions, and its utilization in solution or as a pure gas has witnessed notable advancements. However, the use of gaseous ammonia remains problematic in academic laboratory settings, while employing aqueous ammonia poses challenges in highly water-sensitive transformations. Consequently, the search for alternative sources of ammonia has garnered considerable attention among the organic chemistry community. This comprehensive literature review focuses on the use of ammonia surrogates in amination reactions, irrespective of the resulting intermediate. The review emphasizes the formation of the C-N bond and underscores the importance of generating intermediate products that can be readily transformed into primary amines through well-established reactions.

Ligand-assisted olefin-switched divergent oxidative Heck cascade with molecular oxygen enabled by self-assembled imines

Divergent oxidative Heck reaction has proven to be reliable for the rapid construction of molecular complexity, while olefins switched the outcome that remained underexplored.

Expedient Ni-catalyzed C-H/C-H cross-dehydrogenative coupling of aryl amides with azoles

A nickel-catalyzed C-H heteroarylation of arenes has been described using a removable oxazoline-aniline derived directing group. Utilization of inexpensive nickel(II)-catalyst, substrate scope, functional group diversity and late-stage functionalization of xanthine-derived...

Rh(III)-Catalysed Cascade C-H Imidization/Cyclization of N-Methoxybenzamides with Isoxazolones for the Assembly of Dihydroquinazolin-4(1H)-one Derivatives

By virtue of isoxazolones as viable imidizating reagents, an efficient Rh(III)-catalysed redox-neutral C-H imidization/cyclization cascade has been developed for the specific assembly of dihydroquinazolin-4(1H)-ones with the equipment of a quaternary...

Cu-Catalyzed Synthesis of Benzoxazole with Phenol and Cyclic Oxime

A Cu-catalyzed straightforward synthesis of benzoxazoles from free phenols and cyclic oxime esters is reported. The mild reaction conditions tolerate various electron-withdrawing and electron-donating functional groups on both substrates, affording benzoxazoles in moderate to good yields. With this protocol, large-scale syntheses of Ezutromid and Flunoxaprofe in one or two steps are demonstrated. A catalytic mechanism, which includes Cu-catalyzed amination via inner-sphere electron transfer and consequent annulation, is proposed.

Copper-Mediated ortho-C-H Amination Using DMF as the Amine Source

We report herein a copper-mediated ortho-C-H amination of anilines using oxalamide as the directing group and DMF as the amination reagent. This protocol tolerates various functional groups and shows good heterocyclic compatibility. Late-stage dimethylamination of drugs demonstrated the synthetic practicality of the protocol. Mechanistic experiments indicate that a radical pathway may be involved in the reaction.

Sequential C-H activation enabled expedient delivery of polyfunctional arenes

Modular construction of polyfunctional arenes from abundant feedstocks stands as an unremitting pursue in synthetic chemistry, accelerating the discovery of drugs and materials. Herein, using the multiple C-H activation strategy with versatile imidate esters, the expedient delivery of molecular libraries of densely functionalized sulfur-containing arenes was achieved, which enabled the concise construction of biologically active molecules, such as Bipenamol.

Copper-Catalyzed Intermolecular C(sp2)-H Amination with Electrophilic O-Benzoyl Hydroxylamines

A copper-catalyzed intermolecular electrophilic amination of benzamides with O-benzoyl hydroxylamines was achieved with the assistance of an 8-aminoquinolyl group. With this protocol, good compatibility was observed for a variety of aryl amides and heteroaryl amides, and excellent tolerance with various functional groups was achieved. Significantly, the monoaminated product was overwhelmingly delivered under the simple reaction conditions. Preliminary mechanistic investigations suggested that a radical pathway should be excluded and C-H activation be potentially the rate-determining step.

On the application of 3d metals for C-H activation toward bioactive compounds: The key step for the synthesis of silver bullets

Several valuable biologically active molecules can be obtained through C-H activation processes. However, the use of expensive and not readily accessible catalysts complicates the process of pharmacological application of these compounds. A plausible way to overcome this issue is developing and using cheaper, more accessible, and equally effective catalysts. First-row transition (3d) metals have shown to be important catalysts in this matter. This review summarizes the use of 3d metal catalysts in C-H activation processes to obtain potentially (or proved) biologically active compounds.

Transient directing ligands for selective metal-catalysed C–H activation

C-H activation is a 'simple-to-complex' transformation that nature has perfected over millions of years of evolution. Transition-metal-catalysed C-H activation has emerged as an expeditious means to expand the chemical space by introducing diverse functionalities. Notably, among the strategies to selectively cleave a particular C-H bond, the catalytic use of a small molecule as co-catalyst to generate a transient directing group, which provides a balance between step economy and chemical productivity, has gained immense attention in recent years. This allows one to convert a desired C-H bond irrespective of its geometrical or stereochemical configuration. This Review describes the various transient directing groups used in C-H activation and explains their mechanistic significance.

Copper-Catalyzed Oxalamide-Directed ortho-C-H Amination of Anilines with Alkylamines

A copper-catalyzed oxalamide-directed ortho-C-H amination of anilines has been developed by using 1 atm of air as the sole oxidant. The protocol shows excellent functional group tolerance, and some heterocyclic amines including indole, benzothiophene, benzothiazole, quinoline, isoquinoline, and quinoxaline could be compatible in the reaction. The late-stage diversification of medicinal drugs demonstrates the synthetic utility of this protocol.

Base-promoted Lewis acid catalyzed synthesis of quinazoline derivatives

A one-pot protocol has been developed for the synthesis of quinazolinones from amide-oxazolines with TsCl via a cyclic 1,3-azaoxonium intermediate and 6π electron cyclization in the presence of a Lewis acid and base. The process is operationally simple and has a broad substrate scope. This method provides a unique strategy for the construction of quinazolinones.

Synthesis of quinazoin-4-ones through an acid ion exchange resin mediated cascade reaction

An interesting cascade reaction of N-(2-(4,5-dihydrooxazol-2-yl)phenyl)benzamide in the presence of an acid ion exchange resin is described. In this reaction, a range of substrates bearing various substituent groups are well compatible. This work provides a green and atom-economical alternative approach for the synthesis of quinazolin-4-ones in good yields.

Cu(II)-Catalyzed Ortho C(sp2)-H Diarylamination of Arylamines To Synthesize Triarylamines

A copper-catalyzed, directed ortho C-H diarylamination of indoles, indolines, anilines, and N-aryl-7-azaindoles has been established. Only copper salt as the catalyst and oxygen as the terminal oxidant are used to synthesize triarylamines using various diarylamines including carbazole and phenothiazine. Mechanistic interrogation reveals that copper plays a dual role.

Copper-Catalyzed Annulation or Homocoupling of Sulfoxonium Ylides: Synthesis of 2,3-Diaroylquinolines or α,α,β-Tricarbonyl Sulfoxonium Ylides

An unprecedented copper-catalyzed reaction of sulfoxonium ylides and anthranils is reported that enables an easy access to 2,3-diaroylquinolines through a [4+1+1] annulation. Copper-catalyzed homocoupling of sulfoxonium ylides provided α,α,β-tricarbonyl sulfoxonium ylides, which provides a strategy to extend the carbon chain through C-C bond formation. The utility of the products as well as the mechanistic details of the process are presented.

Copper mediated C(sp2)-H amination and hydroxylation of phosphinamides

Copper mediated C(sp2)-H amination and hydroxylation of arylphosphinic acid are accomplished by adopting phosphinamide as the directing group. This method is distinguished by its wide substrate scope and excellent functional group tolerance, thus allowing for the rapid preparation of organophosphorus compounds in organic synthesis.

Bidentate Directing Groups: An Efficient Tool in C-H Bond Functionalization Chemistry for the Expedient Construction of C-C Bonds

During the past decades, synthetic organic chemistry discovered that directing group assisted C-H activation is a key tool for the expedient and siteselective construction of C-C bonds. Among the various directing group strategies, bidentate directing groups are now recognized as one of the most efficient devices for the selective functionalization of certain positions due to fact that its metal center permits fine, tunable, and reversible coordination. The family of bidentate directing groups permit various types of assistance to be achieved, such as N,N-dentate, N,O-dentate, and N,S-dentate auxiliaries, which are categorized based on the coordination site. In this review, we broadly discuss various C-H bond functionalization reactions for the formation of C-C bonds with the aid of bidentate directing groups.

Theoretical studies on the N–X (X = Cl, O) bond activation mechanism in catalytic C–H amination

A favorable S_N2-type N–Cl bond cleavage mechanism are proposed for Rh-catalysed C–H amination, which also works for N–O bond cleavage in Rh, Ru, and Pd analogous systems. These results could provide new understanding of C–H amination.

Recent advances in the direct functionalization of quinoxalin-2(1H)-ones

The direct C3-functionalization of quinoxalin-2(1H)-ones via C-H bond activation has recently attracted considerable attention, due to their diverse biological activities and chemical properties. This review will focus on the recent achievements, mainly including arylation, alkylation, acylation, alkoxycarbonylation, amination, amidation and phosphonation of quinoxalin-2(1H)-ones. Their mechanisms are also discussed.

Copper-Catalyzed Electrophilic Ortho C(sp2)-H Amination of Aryl Amines: Dramatic Reactivity of Bicyclic System

A practical copper-catalyzed, 2-picolinamide-directed ortho C-H amination of anilines with benzoyl-protected hydroxylamines has been disclosed that proceeds smoothly without any external stoichiometric oxidant or additives. Remarkably, besides anilines, bicyclic naphthyl or heterocyclic amines furnished amination products with five- and six-membered cyclic and acyclic amines at the ortho position selectively. This electrophilic C-H amination also proceeds smoothly in water under slightly modified reaction conditions.

Deacetylative Amination of Acetyl Arenes and Alkanes with C-C Bond Cleavage

The Brønsted acid-catalyzed synthesis of primary amines from acetyl arenes and alkanes with C-C bond cleavage is described. Although the conversion from an acetyl group to amine has traditionally required multiple steps, the method described herein, which uses an oxime reagent as an amino group source, achieves the transformation directly via domino transoximation/Beckmann rearrangement/Pinner reaction. The method was also applied to the synthesis of γ-aminobutyric acids, such as baclophen and rolipram.

Direct Acyloxylation of C(sp2)-H and C(sp2)-X (X = Cl, Br) Bonds in Aromatic Amides Using Copper Bromide and 2-(4,5-Dihydro-oxazol-2-yl)-phenylamine

Here we reported a method for Cu²⁺-catalyzed ortho-acyloxylation of either the C(sp²)-H or C(sp²)-X (X = Cl, Br) bond of aromatic amides with carboxylic acid, especially olefine acids, to obtain corresponding products in good yields up to 91%. The catalyst CuBr₂ is cheap and stable to conserve in comparison with other metals, like Rh, Pd, Ru, and Cu⁺. This simple procedure is applicable for wide substrate scope and various functional groups to produce carboxylic esters without any additives or ligands.

Synthesis of quinazolin-4(1H)-ones via amination and annulation of amidines and benzamides

Quinazolinones have broad applications in the biological, pharmaceutical and material fields. Studies on the synthesis of these compounds are therefore widely conducted. Herein, a novel and highly efficient copper-mediated tandem C(sp2)-H amination and annulation of benzamides and amidines for the synthesis of quinazolin-4(1H)-ones is proposed. This synthetic route can be useful for the construction of quinazolin-4(1H)-one frameworks.

Copper-Mediated Amination of Aryl C-H Bonds with the Direct Use of Aqueous Ammonia via a Disproportionation Pathway

The direct amination of C-H bonds with ammonia is a challenge in synthetic chemistry. Herein, we present a copper-mediated approach that enables a chelation-assisted aromatic C-H bond amination using aqueous ammonia. A key strategy was to use soft low-valent Cu(I) species to avoid the strong coordination of ammonia. Mechanistic investigations suggest that the catalysis is initiated by a facile deprotonation of bound ammonia, and the C-N coupling is achieved by subsequent reductive elimination of the resultant copper-amido intermediate from a Cu(III) intermediate that is readily generated by disproportionation of low-valent copper analogues. This mechanistic postulate was supported by a preliminary kinetic isotope effect study and computations. This new chelation-assisted, copper-mediated C-H bond amination with aqueous ammonia was successfully applied to a broad range of substrates to deliver primary anilines. Moreover, the mild conditions required for this transformation allowed the reaction to operate even under substoichiometric conditions to enable a late-stage application for the preparation of pharmaceutical agents.