Mechanisms of catalytic reduction of CO2 with heme and nonheme metal complexes

Highly Efficient Carbon Dioxide Electroreduction via DNA-Directed Catalyst Immobilization

Electrochemical reduction of carbon dioxide (CO2) is a promising route to up-convert this industrial byproduct. However, to perform this reaction with a small-molecule catalyst, the catalyst must be proximal to an electrode surface. Efforts to immobilize molecular catalysts on electrodes have been stymied by the need to optimize the immobilization chemistries on a case-by-case basis. Taking inspiration from nature, we applied DNA as a molecular-scale "Velcro" to investigate the tethering of three porphyrin-based catalysts to electrodes. This tethering strategy improved both the stability of the catalysts and their Faradaic efficiencies (FEs). DNA-catalyst conjugates were immobilized on screen-printed carbon and carbon paper electrodes via DNA hybridization with nearly 100% efficiency. Following immobilization, a higher catalyst stability at relevant potentials is observed. Additionally, lower overpotentials are required for the generation of carbon monoxide (CO). Finally, high FE for CO generation was observed with the DNA-immobilized catalysts as compared to the unmodified small-molecule systems, as high as 79.1% FE for CO at -0.95 V vs SHE using a DNA-tethered catalyst. This work demonstrates the potential of DNA "Velcro" as a powerful strategy for catalyst immobilization. Here, we demonstrated improved catalytic characteristics of molecular catalysts for CO2 valorization, but this strategy is anticipated to be generalizable to any reaction that proceeds in aqueous solutions.

Modulating the Electronic Structure of Cobalt in Molecular Catalysts via Coordination Environment Regulation for Highly Efficient Heterogeneous Nitrate Reduction

Ammonia (NH3) is pivotal in modern industry and represents a promising next-generation carbon-free energy carrier. Electrocatalytic nitrate reduction reaction (eNO3RR) presents viable solutions for NH3 production and removal of ambient nitrate pollutants. However, the development of eNO3RR is hindered by lacking the efficient electrocatalysts. To address this challenge, we synthesized a series of macrocyclic molecular catalysts for the heterogeneous eNO3RR. These materials possess different coordination environments around metal centers by surrounding subunits. Consequently, electronic structures of the active centers can be altered, enabling tunable activity towards eNO3RR. Our investigation reveals that metal center with an N2(pyrrole)-N2(pyridine) configuration demonstrates superior activity over the others and achieves a high NH3 Faradaic efficiency (FE) of over 90 % within the tested range, where the highest FE of approximately 94 % is obtained. Furthermore, it achieves a production rate of 11.28 mg mgcat -1 h-1, and a turnover frequency of up to 3.28 s-1. Further tests disclose that these molecular catalysts with diverse coordination environments showed different magnetic moments. Theoretical calculation results indicate that variated coordination environments can result in a d-band center variation which eventually affects rate-determining step energy and calculated magnetic moments, thus establishing a correlation between electronic structure, experimental activity, and computational parameters.

CO2 Reduction by an Iron(I) Porphyrinate System: Effect of Hydrogen Bonding on the Second Coordination Sphere

Transforming CO2 into valuable materials is an important reaction in catalysis, especially because CO2 concentrations in the atmosphere have been growing steadily due to extensive fossil fuel usage. From an environmental perspective, reduction of CO2 to valuable materials should be catalyzed by an environmentally benign catalyst and avoid the use of heavy transition-metal ions. In this work, we present a computational study into a novel iron(I) porphyrin catalyst for CO2 reduction, namely, with a tetraphenylporphyrin ligand and analogues. In particular, we investigated iron(I) tetraphenylporphyrin with one of the meso-phenyl groups substituted with o-urea, p-urea, or o-2-amide groups. These substituents can provide hydrogen-bonding interactions in the second coordination sphere with bound ligands and assist with proton relay. Furthermore, our studies investigated bicarbonate and phenol as stabilizers and proton donors in the reaction mechanism. Potential energy landscapes for double protonation of iron(I) porphyrinate with bound CO2 are reported. The work shows that the bicarbonate bridges the urea/amide groups to the CO2 and iron center and provides a tight bonding pattern with strong hydrogen-bonding interactions that facilitates easy proton delivery and reduction of CO2. Specifically, bicarbonate provides a low-energy proton shuttle mechanism to form CO and water efficiently. Furthermore, the o-urea group locks bicarbonate and CO2 in a tight orientation and helps with ideal proton transfer, while there is more mobility and lesser stability with an o-amide group in that position instead. Our calculations show that the o-urea group leads to reduction in proton-transfer barriers, in line with experimental observation. We then applied electric-field-effect calculations to estimate the environmental effects on the two proton-transfer steps in the reaction. These calculations describe the perturbations that enhance the driving forces for the proton-transfer steps and have been used to make predictions about how the catalysts can be further engineered for more enhanced CO2 reduction processes.

Electrocatalytic CO2 Reduction: Monitoring of Catalytically Active, Downgraded, and Upgraded Cobalt Complexes

The premise of most studies on the homogeneous electrocatalytic CO2 reduction reaction (CO2RR) is a good understanding of the reaction mechanisms. Yet, analyzing the reaction intermediates formed at the working electrode is challenging and not always attainable. Here, we present a new, general approach to studying the reaction intermediates applied for CO2RR catalyzed by a series of cobalt complexes. The cobalt complexes were based on the TPA-ligands (TPA = tris(2-pyridylmethyl)amine) modified by amino groups in the secondary coordination sphere. By combining the electrochemical experiments, electrochemistry-coupled electrospray ionization mass spectrometry, with density functional theory (DFT) calculations, we identify and spectroscopically characterize the key reaction intermediates in the CO2RR and the competing hydrogen-evolution reaction (HER). Additionally, the experiments revealed the rarely reported in situ changes in the secondary coordination sphere of the cobalt complexes by the CO2-initiated transformation of the amino substituents to carbamates. This launched an even faster alternative HER pathway. The interplay of three catalytic cycles, as derived from the experiments and supported by the DFT calculations, explains the trends that cobalt complexes exhibit during the CO2RR and HER. Additionally, this study demonstrates the need for a molecular perspective in the electrocatalytic activation of small molecules efficiently obtained by the EC-ESI-MS technique.

Molecular Co-Catalyst Confined within a Metallacage for Enhanced Photocatalytic CO2 Reduction

The construction of structurally well-defined supramolecular hosts to accommodate catalytically active species within a cavity is a promising way to address catalyst deactivation. The resulting supramolecular catalysts can significantly improve the utilization of catalytic sites, thereby achieving a highly efficient chemical conversion. In this study, the Co-metalated phthalocyanine (Pc-Co) was successfully confined within a tetragonal prismatic metallacage, leading to the formation of a distinctive type of supramolecular photocatalyst (Pc-Co@Cage). The host-guest architecture of Pc-Co@Cage was unambiguously elucidated by single-crystal X-ray diffraction (SCXRD), NMR, and ESI-TOF-MS, revealing that the single cobalt active site can be thoroughly isolated within the space-restricted microenvironment. In addition, we found that Pc-Co@Cage can serve as a homogeneous supramolecular photocatalyst that displays high CO2 to CO conversion in aqueous media under visible light irradiation. This supramolecular photocatalyst exhibits an obvious improvement in activity (TONCO = 4175) and selectivity (SelCO = 92%) relative to the nonconfined Pc-Co catalyst (TONCO = 500, SelCO = 54%). The present strategy provided a rare example for the construction of a highly active, selective, and stable photocatalyst for CO2 reduction through a cavity-confined molecular catalyst within a discrete metallacage.

Mechanistic insights of electrocatalytic CO2 reduction by Mn complexes: synergistic effects of the ligands

The electrocatalytic mechanisms of CO2 reduction catalyzed by pyridine-oxazoline (pyrox)-based Mn catalysts were investigated by DFT calculations. In-depth comparative analyses of pyrox-based and bipyridine-based Mn complexes were carried out. C-OH cleavage is the rate-determining step for both the protonation-first path and the reduction-first path. The free energy of CO2 activation (ΔG1) and the electrons donated by CO ligands in this step are effective descriptors in regulating the C-OH cleavage barrier. The reduction of carboxylate complex 6 (E6) is the potential-determining step for the reduction-first path. Meanwhile, for the protonation-first path, the initial generation (E2) or the regeneration (E8) of active catalyst might be potential-determining. Hirshfeld charge and orbital contribution analysis indicate that E6 is definitely based on the heterocyclic ligand and E2 is related to both the heterocyclic ligand and three CO ligands. Therefore, replacement of the CO ligand by a stronger electron donating ligand can effectively boost the catalytic activity of CO2 reduction without increasing the overpotential in the reduction-first path. This hypothesis is supported by the mechanism calculations of the Mn complex in which the axial CO ligand is replaced by a pyridine or PMe3.

Photocatalytic Reduction of CO2 to HCOOH and CO by a Phosphine-Bipyridine-Phosphine Ir(III) Catalyst: Photophysics, Nonadiabatic Effects, Mechanism, and Selectivity

Photocatalytic CO2 reduction is one of the best solutions to solve the global energy crisis and to realize carbon neutralization. The tetradentate phosphine-bipyridine (bpy)-phosphine (PNNP)-type Ir(III) photocatalyst, Mes-IrPCY2, was reported with a high HCOOH selectivity but the photocatalytic mechanism remains elusive. Herein, we employ electronic structure methods in combination with radiative, nonradiative, and electron transfer rate calculations, to explore the entire photocatalytic cycle to either HCOOH or CO, based on which a new mechanistic scenario is proposed. The catalytic reduction reaction starts from the generation of the precursor metal-to-ligand charge transfer (3 MLCT) state. Subsequently, the divergence happens from the 3 MLCT state, the single electron transfer (SET) and deprotonation process lead to the formation of one-electron-reduced species and Ir(I) species, which initiate the reduction reaction to HCOOH and CO, respectively. Interestingly, the efficient occurrence of proton or electron transfer reduces barriers of critical steps. In addition, nonadiabatic transitions play a nonnegligible role in the cycle. We suggest a lower free-energy barrier in the reaction-limiting step and the very efficient SET in 3 MLCT are cooperatively responsible for a high HCOOH selectivity. The gained mechanistic insights could help chemists to understand, regulate, and design photocatalytic CO2 reduction reaction of similar function-integrated molecular photocatalyst.

Mechanism of CO2 Reduction to Methanol with H2 on an Iron(II)-scorpionate Catalyst

CO2 utilization is an important process in the chemical industry with great environmental power. In this work we show how CO2 and H2 can be reacted to form methanol on an iron(II) center and highlight the bottlenecks for the reaction and what structural features of the catalyst are essential for efficient turnover. The calculations predict the reactions to proceed through three successive reaction cycles that start with heterolytic cleavage of H2 followed by sequential hydride and proton transfer processes. The H2 splitting process is an endergonic process and hence high pressures will be needed to overcome this step and trigger the hydrogenation reaction. Moreover, H2 cleavage into a hydride and proton requires a metal to bind hydride and a nearby source to bind the proton, such as an amide or pyrazolyl group, which the scorpionate ligand used here facilitates. As such the computations highlight the non-innocence of the ligand scaffold through proton shuttle from H2 to substrate as an important step in the reaction mechanism.

Investigation of Iron(III) Tetraphenylporphyrin as a Redox Flow Battery Anolyte: Unexpected Side Reactivity with the Electrolyte

Redox flow batteries (RFBs) present an opportunity to bridge the gap between the intermittent availability of green energy sources and the need for on-demand grid level energy storage. While aqueous vanadium-based redox flow batteries have been commercialized, they are limited by the constraints of using water as an electrochemical solvent. Nonaqueous redox flow battery systems can be used to produce high voltage batteries due to the larger electrochemical window in nonaqueous solvents and the ability to tune the redox properties of active materials through functionalization. Iron porphyrins, a class of organometallic macrocycles, have been the subject of many studies for their photocatalytic and electrocatalytic properties in nonaqueous solvents. Often, iron porphyrins can undergo multiple redox events making them interesting candidates for use as anolytes in asymmetrical redox flow batteries or as both catholyte and anolyte in symmetrical redox flow battery systems. Here the electrochemical properties of Fe(III)TPP species relevant to redox flow battery electrolytes are investigated including solubility, electrochemical properties, and charge/discharge cycling. Commonly used support electrolyte salts can have reactivities that are often overlooked beyond their conductivity properties in nonaqueous solvents. Parasitic reactions with the cations of common support electrolytes are highlighted herein, which underscore the careful balance required to fully assess the potential of novel RFB electrolytes.

Mechanistic Insights into Photochemical CO2 Reduction to CH4 by a Molecular Iron-Porphyrin Catalyst

Iron tetraphenylporphyrin complex modified with four trimethylammonium groups (Fe-p-TMA) is found to be capable of catalyzing the eight-electron eight-proton reduction of CO₂ to CH₄ photochemically in acetonitrile. In the present work, density functional theory (DFT) calculations have been performed to investigate the reaction mechanism and to rationalize the product selectivity. Our results revealed that the initial catalyst Fe-p-TMA ([Cl-Fe(III)-LR₄]⁴⁺, where L = tetraphenylporphyrin ligand with a total charge of -2, and R₄ = four trimethylammonium groups with a total charge of +4) undergoes three reduction steps, accompanied by the dissociation of the chloride ion to form [Fe(II)-L^••2-R₄]²⁺. [Fe(II)-L^••2-R₄]²⁺, bearing a Fe(II) center ferromagnetically coupled with a tetraphenylporphyrin diradical, performs a nucleophilic attack on CO₂ to produce the ¹η-CO₂ adduct [CO₂^•--Fe(II)-L^•-R₄]²⁺. Two intermolecular proton transfer steps then take place at the CO₂ moiety of [CO₂^•--Fe(II)-L^•-R₄]²⁺, resulting in the cleavage of the C-O bond and the formation of the critical intermediate [Fe(II)-CO]⁴⁺ after releasing a water molecule. Subsequently, [Fe(II)-CO]⁴⁺ accepts three electrons and one proton to generate [CHO-Fe(II)-L^•-R₄]²⁺, which finally undergoes a successive four-electron-five-proton reduction to produce methane without forming formaldehyde, methanol, or formate. Notably, the redox non-innocent tetraphenylporphyrin ligand was found to play an important role in CO₂ reduction since it could accept and transfer electron(s) during catalysis, thus keeping the ferrous ion at a relatively high oxidation state. Hydrogen evolution reaction via the formation of Fe-hydride ([Fe(II)-H]³⁺) turns out to endure a higher total barrier than the CO₂ reduction reaction, therefore providing a reasonable explanation for the origin of the product selectivity.

Highly Efficient Visible-Light-Driven CO2-to-CO Conversion by Coordinatively Unsaturated Co-Salen Complexes in a Water-Containing System

The development of cost-effective catalysts for CO₂ reduction is highly desired but remains a significant challenge. The unsaturated coordination metal center in a catalyst is favorable for the process of catalytic CO₂ reduction. In this paper, two asymmetric salen ligands were used to synthesize two coordinatively unsaturated Co-salen complexes. The two Co-salen complexes exhibit an unsaturated coordination pattern and display high activity and CO selectivity for visible-light-driven CO₂ reduction in a water-containing system. The photocatalytic performance of 2 is higher than that of 1 because the reduction potential of the catalytic Co^II center and the energy barrier of the catalytic transition states of 2 are lower than those of 1, with turnover numbers (TON_CO), turnover frequencies (TOF), and CO selectivity values of 8640, 0.24 s^-1, and 97% for 2, respectively. The photocatalytic reduction of CO₂ to CO for 2 is well supported by control experiments and density functional theory (DFT) calculations.

Potential- and Buffer-Dependent Selectivity for the Conversion of CO2 to CO by a Cobalt Porphyrin-Peptide Electrocatalyst in Water

A semisynthetic electrocatalyst for carbon dioxide reduction to carbon monoxide in water is reported. Cobalt microperoxidase-11 (CoMP11-Ac) is shown to reduce CO₂ to CO with a turnover number of up to 32,000 and a selectivity of up to 88:5 CO:H₂. Higher selectivity for CO production is favored by a less cathodic applied potential and use of a higher pK _a buffer. A mechanistic hypothesis is presented in which avoiding the formation and protonation of a formal Co(I) species favors CO production. These results demonstrate how tuning reaction conditions impact reactivity toward CO₂ reduction for a biocatalyst previously developed for H₂ production.

Importance of steric bulkiness of iridium photocatalysts with PNNP tetradentate ligands for CO2 reduction

A series of Ir complexes has been developed as multifunctional photocatalysts for CO₂ reduction to give HCO₂H selectively. The catalytic activities and photophysical properties vary widely across the series, and the bulky group insertion resulted in the formation of HCO₂H and CO with the catalyst turnover number of >10 400.

Deciphering Distinct Overpotential-Dependent Pathways for Electrochemical CO2 Reduction Catalyzed by an Iron-Terpyridine Complex

[Fe(tpyPY2Me)]²⁺ ([Fe]²⁺) is a homogeneous electrocatalyst for converting CO₂ into CO featuring low overpotentials of <100 mV, near-unity selectivity, and high activity with turnover frequencies faster than 100 000 s^-1. To identify the origins of its exceptional performance and inform future catalyst design, we report a combined computational and experimental study that establishes two distinct mechanistic pathways for electrochemical CO₂ reduction catalyzed by [Fe]²⁺ as a function of applied overpotential. Electrochemical data shows the formation of two catalytic regimes at low (η_TOF/2 of 160 mV) and high (η_TOF/2 of 590 mV) overpotential plateaus. We propose that at low overpotentials [Fe]²⁺ undergoes a two-electron reduction, two-proton-transfer mechanism (electrochemical-electrochemical-chemical-chemical, EECC), where turnover occurs through the dicationic iron complex, [Fe]²⁺. Computational analysis supports the importance of the singlet ground-state electronic structure for CO₂ binding and that the rate-limiting step is the second protonation in this low-overpotential regime. When more negative potentials are applied, an additional electron-transfer event occurs through either a stepwise or proton-coupled electron-transfer (PCET) pathway, enabling catalytic turnover from the monocationic iron complex ([Fe]⁺) via an electrochemical-chemical-electrochemical-chemical (ECEC) mechanism. Comparison of experimental kinetic data obtained from variable controlled potential electrolysis (CPE) experiments with direct product detection with calculated rates obtained from the energetic span model supports the PCET pathway as the most likely mechanism. Moreover, we build upon this mechanistic understanding to propose the design of an improved ligand framework that is predicted to stabilize the key transition states identified in our study and explore their electronic structures using an energy decomposition analysis. Taken together, this work highlights the value of synergistic computational/experimental approaches to decipher mechanisms of new electrocatalysts and direct the rational design of improved platforms.

Atomic- and Molecular-Level Modulation of Dispersed Active Sites for Electrocatalytic CO2 Reduction

Global climate changes have been impacted by the excessive CO 2 emission, which exacerbates the environmental problems. Electrochemical CO 2 reduction (CO 2 RR) offers the solution for utilizing CO 2 as feedstocks for value-added products while potentially mitigating the negative effects. Owing to the extreme stability of CO 2 , selectivity and efficiency are crucial factors in the development of CO 2 RR electrocatalysts. Recently, single-atom catalysts have emerged as potential electrocatalysts for CO 2 reduction. They generally comprise of atomically- and molecularly dispersed active sites over conductive supports, which enable atomic-level and molecular-level modulations. In this minireview, catalyst preparations, principle of modulations, and reaction mechanisms are summarised together with related recent advances. The atomic-level modulations are first discussed, followed by the molecular-level modulations. Finally, the current challenges and future opportunities are provided as guidance for further developments regarding the discussed topics.

Theoretical insights into effective electron transfer and migration behavior for CO2 reduction on the BiOBr(001) surfaces

Carbon dioxide (CO₂) activation by effective electrons has been regarded as the rather necessary first-step for a CO₂ reduction reaction (CO₂RR). In addition, the electron migration and photoreaction selectivity are closely associated with the dominant crystal surface of a catalyst. Therefore, it is very interesting and important to elucidate the electron transfer and charge density effects on the catalyst surface for the CO₂RR. In this work, the dominant highly-active BiOBr(001) surfaces with Bi-, O- and Br-termination atoms are designed so that their electron distributions and CO₂RR behaviors can be observed. The electron-rich sites on the BiOBr(001) surfaces, where more effective electrons will migrate to achieve the activation of the adsorbed CO₂, are firstly confirmed by the electron density difference based on density functional theory calculations. Next, the CO₂RR pathways at the electron-rich sites are investigated to explore the migration mechanism of effective photo-induced electrons. The results obtained reveal that if a larger number of electrons transfer to CO₂, then less energy is needed to break the CO bond, and the formation of a *COOH intermediate corresponds to the ability of the surface to take part in protonation. Furthermore, the interface Bi atom can boost the transfer efficiency of effective electrons to CO₂, but the exposed Br atom with a longer electron transfer distance, because of the steric hindrance of the interface Br atoms, makes it difficult for the electrons to migrate, resulting in it being harder to fracture the CO bond to benefit the formation of the HCOOH product. These findings should give deep insight into the migration behaviors of effective electrons for CO₂ photoreduction on the BiOBr(001) surface and provide new perspectives for better understanding the structure-performance relationship at the molecular level.

Strategies for Breaking Molecular Scaling Relationships for the Electrochemical CO2 Reduction Reaction

The electrocatalytic CO2 reduction reaction (CO2RR) is a promising strategy for converting CO2 to fuels and value-added chemicals using renewable energy sources. Molecular electrocatalysts show promise for the selective conversion...

Recent Advances in the Catalytic Applications of Lanthanide-Oxo Clusters

Lanthanide-oxo/hydroxo clusters (LOCs) in this mini-review refer to polynuclear complexes featuring a polyhedral metal-oxo/hydroxo cluster core of lanthanide ions exclusively or with coexisting 3d metal ions. We summarize herein the recent works using this unique family of cluster complexes for catalysis; this aspect of research stands in stark contrast to their extensively studied synthetic and structural chemistry as well as the much-researched magnetic properties. Following a brief introduction of the synthetic strategies for these clusters, pertinent results from available literature reports are surveyed and discussed according to the types of catalyzed reactions. Particular attention was paid to the selection of a cluster catalyst for a specific type of reactions as well as the corresponding reaction mechanism. To the end, the advantages and challenges in utilizing LOCs as multifunctional catalysts are summarized, and possible future research directions are proposed.

Catalysis of CO2 reduction by diazapyridinophane complexes of Fe, Co, and Ni: CO2 binding triggered by combined frontier MO associations involving a SOMO

Our previous study on the photochemical CO₂ reduction into CO catalyzed by the diazapyridinophane complexes of Fe, Co, and Ni revealed that (i) the Co catalyst shows the highest TOF but degrades rapidly, (ii) the Fe catalyst exhibits a lower TOF relative to Co but shows higher robustness, giving a higher TON, and (iii) the Ni complex shows no activity (Sakaguchi et al., Chem. Commun., 2019, 55, 8552). Here we show our DFT results unveiling that the Fe and Co catalysts can utilize multiple sets of frontier MO associations at the CO₂ binding by including one of the SOMOs in a high-spin d⁷ Fe(I) and d⁸ Co(I) center, respectively, giving an increased driving force for these oxidative addition steps. Remarkably, two-electron reduction of CO₂ to CO₂^2- at the binding step is driven by the two electrons transferred from different d-based orbitals. The Co^I species binds CO₂ at the rate-limiting step with an activation barrier of 15.0 kcal mol^-1, rationalizing the high initial TOF observed. However, the Co^I(CO) species is given as a dead-end product, consistent with its relatively rapid deactivation. The Fe catalyst possesses a slightly higher barrier in CO₂ binding (ΔG^‡ = 15.8 kcal mol^-1) but does not stabilize the Fe^I(CO) species which readily releases CO (ΔG = 3.5 kcal mol^-1). The Ni catalyst has the smallest barrier in CO₂ binding (ΔG^‡ = 11.5 kcal mol^-1) but the CO release is largely prohibited by the dead-end Ni^I(CO) species, consistent with its inactive character towards CO₂ reduction. The combined results all satisfactorily explain the observed catalytic behaviors.

Computational Study for CO2-to-CO Conversion over Proton Reduction Using [Re[bpyMe(Im-R)](CO)3Cl]+ (R = Me, Me2, and Me4) Electrocatalysts and Comparison with Manganese Analogues

The Nippe group has previously reported a series of imidazolium-functionalized rhenium bipyridyl tricarbonyl electrocatalysts, [Re[bpyMe(Im-R)]-(CO)₃Cl]⁺ (R = Me and Me₂), for CO₂-to-CO conversion using H₂O as the proton source [Sung, S.; Kumar, D., et al. Electrocatalytic CO₂ Reduction by Imidazolium-Functionalized Molecular Catalysts. J. Am. Chem. Soc. 2017, 139, 40, 13993-13996. 10.1021/jacs.7b07709]. These compounds feature charged imidazolium ligands in the secondary coordination sphere and exhibit higher catalytic activities as compared to the Lehn catalyst [Re(bpy)(CO)₃Cl] (where bpy = 2,2'-bipyridine). However, the reaction mechanism for the CO₂ reduction reaction (CO₂RR) over the competing hydrogen evolution reaction (HER) is unclear. Here, we employ density functional theory (DFT) and restricted active space self-consistent field (RASSCF) methods to study the selectivity for CO₂ fixation using [Re[bpyMe(ImMe)](CO)₃Cl]⁺ (1 ⁺) in water and compare its reactivity to [Re[bpyMe(ImMe₂)](CO)₃Cl]⁺ (2 ⁺) and [Re[bpyMe(ImMe₄)](CO)₃Cl]⁺ (3 ⁺). Our results reveal that the turnover frequency (TOF) for CO₂RR using 1 ⁺ is 4 orders of magnitude higher than for proton reduction, consistent with controlled potential electrolysis (CPE) experiments in which CO was the only detectable reduction product. The imidazolium moiety in the secondary coordination sphere stabilizes the metallocarboxylate species and assists the C-O cleavage through intermolecular hydrogen-bonding stabilizations. Furthermore, our calculations imply that the strongest hydrogen-bonding interactions at the C2 position in 1 ⁺ contribute to the faster reaction rate observed experimentally with respect to 2 ⁺. More significantly, the use of the energy span model demonstrates that the turnover frequency-determining transition state (TDTS) corresponds to the formation of the Re-CO₂ adduct, contrasting with manganese analogues in which the C-O bond cleavage step is the TDTS. We attribute this distinction based on the electronic structures of doubly reduced active catalysts. Indeed, RASSCF calculations indicate that rhenium compounds are best described as a rhenium(I) coupled with a doubly reduced bipyridine ligand, [Re^I[bpyMe(ImMe)^2-](CO)₃]⁰. In contrast, manganese analogues feature a metal center in a formal zero oxidation state antiferromagnetically coupled with an unpaired electron on the bpy, [Mn⁰[bpyMe(ImMe)^•-](CO)₃]⁰.

An insight into the reaction mechanism of CO2 photoreduction catalyzed by atomically dispersed Fe atoms supported on graphitic carbon nitride

We report a combination of experimental and computational mechanistic studies for the photoreduction of CO₂ to CO with water, catalyzed by single-atom Fe supported on graphitic carbon nitride (g-C₃N₄). Density functional theory (DFT) and time-dependent DFT (TDDFT) methods were utilized to explore the behavior of single-atom Fe in g-C₃N₄, which is of vital importance to the understanding of the CO₂ reduction reaction (CO₂RR) mechanism. The calculation results reveal that the rate-limiting step of the hydrogen-bonded complex in the absence of Fe atoms is the cleavage of C-O bonds in COOH radicals during the whole CO₂RR, which includes the photophysical and photochemical processes. The presence of Fe atoms not only activated CO₂ in the ground state and increased the rate constant of the limiting step in the photophysical process, but also functioned as the catalytic active center, lowering the reaction barrier of the C-O bond cleavage in COOH˙ in the photochemical process and resulting in improved photocatalytic activity. In addition, DFT calculations further demonstrated that the electron and proton transfer involved in the photophysical and photochemical processes is closely related to and induced by the hydrogen bonds in the excited state.

Mechanism-of-Action Elucidation of Reversible Li-CO2 Batteries Using the Water-in-Salt Electrolyte

Li-CO₂ batteries have attracted worldwide attention because of their dual characteristics of high energy density and effective CO₂ capture. However, the basic electrochemistry mechanism involved has been unclear, which is mainly confused by the complicated decomposition of organic electrolytes. Herein, water-in-salt (WIS, LiTFSI/H₂O 21.0 mol/1 kg) has been explored as a suitable electrolyte for the first time to investigate the reaction mechanism of Li-CO₂ batteries with different cathodes (carbon nanotube (CNT) and Mo₂C/CNT, respectively). An Mo₂C-based Li-CO₂ battery with WIS delivers a higher energy efficiency of 83% and a superior cyclability, compared to those of the CNT-based counterpart cell. Through various ex/in situ qualitative/quantitative characterizations, the Mo₂C-based Li-CO₂ battery with WIS can operate on the reversible conversion of CO₂-to-Li₂C₂O₄ ((e^-/CO₂)_ideal = 1) at lower discharge/charge overpotentials, while the CNT-based counterpart cell is based on the formation/decomposition of Li₂CO₃ ((e^-/CO₂)_ideal ≈ 1.33) at high overpotentials. Such a difference in CO₂ reduction products stems from the stronger interaction between Mo₂C(101) and Li₂C₂O₄ than that of the CNT and Li₂C₂O₄ based on the density functional theory calculations, resulting in the selective stabilization of the intermediate product Li₂C₂O₄ on the Mo₂C surface.

Mechanistic Insights into Co and Fe Quaterpyridine-Based CO2 Reduction Catalysts: Metal-Ligand Orbital Interaction as the Key Driving Force for Distinct Pathways

Both [Co^II(qpy)(H₂O)₂]²⁺ and [Fe^II(qpy)(H₂O)₂]²⁺ (with qpy = 2,2':6',2″:6'',2‴-quaterpyridine) are efficient homogeneous electrocatalysts and photoelectrocatalysts for the reduction of CO₂ to CO. The Co catalyst is more efficient in the electrochemical reduction, while the Fe catalyst is an excellent photoelectrocatalyst ( ACS Catal. 2018, 8, 3411-3417). This work uses density functional theory to shed light on the contrasting catalytic pathways. While both catalysts experience primarily ligand-based reductions, the second reduction in the Co catalyst is delocalized onto the metal via a metal-ligand bonding interaction, causing a spin transition and a distorted ligand framework. This orbital interaction explains the experimentally observed mild reduction potential and slow kinetics of the second reduction. The decreased hardness and doubly occupied d_z²-orbital facilitate a σ-bond with the CO₂-π* in an η¹-κC binding mode. CO₂ binding is only possible after two reductions resulting in an EEC mechanism (E = electron transfer, C = chemical reaction), and the second protonation is rate-limiting. In contrast, the Fe catalyst maintains a Lewis acidic metal center throughout the reduction process because the metal orbitals do not strongly mix with the qpy-π* orbitals. This allows binding of the activated CO₂ in an η²-binding mode. This interaction stabilizes the activated CO₂ via a π-type interaction of a Fe-t_2g orbital and the CO₂-π* and a dative bond of the oxygen lone pair. This facilitates CO₂ binding to a singly reduced catalyst resulting in an ECE mechanism. The barrier for CO₂ addition and the second protonation are higher than those for the Co catalyst and rate-limiting.

C-Methylenation of anilines and indoles with CO2 and hydrosilane using a pentanuclear zinc complex catalyst

The one-step C-methylenation of anilines and indoles with CO2 and phenylsilane was catalyzed by a pentanuclear ZnII complex to give diarylmethanes via geminal C-H and C-C bond formation. It is proposed that the zinc-hydride complex generated in situ is a catalytically active species and that bis(silyl)acetal is a key intermediate. When aniline was used as a substrate, both the C-methylenation and N-methylation proceeded.

Porphyrin-based frameworks for oxygen electrocatalysis and catalytic reduction of carbon dioxide

The recent progress made on porphyrin-based frameworks and their applications in energy-related conversion technologies (e.g., ORR, OER and CO₂RR) and storage technologies (e.g., Zn–air batteries).

Computational study on the reactivity of imidazolium-functionalized manganese bipyridyl tricarbonyl electrocatalysts [Mn[bpyMe(Im-R)](CO)3Br]+ (R = Me, Me2 and Me4) for CO2-to-CO conversion over H2 formation

We have recently reported a series of imidazolium-functionalized manganese bipyridyl tricarbonyl electrocatalysts, [Mn[bpyMe(Im-R)](CO)3Br]+ (R = Me, Me2, and Me4), for CO2-to-CO conversion in the presence of H2O as the proton source [J. Am. Chem. Soc., 2019, 141, 6569]. These catalysts feature slightly acidic imidazolium moieties in the secondary coordination sphere and reduce CO2 at mild electrochemical potentials. Here, we employ density functional theory (DFT) calculations to understand the electronic structure and reactivity for the CO2 reduction reaction (CO2RR) over the competing hydrogen evolution reaction (HER) using [Mn[bpyMe(ImMe)](CO)3Br]+ (1+). Our work indicates that, in the absence of water, the imidazolium ligand stabilizes the Mn-CO2 adduct through hydrogen bonding-like interactions, similar to the activated CO2 molecule in the C-cluster of the Ni,Fe-carbon monoxide dehydrogenase II, and assists the protonation steps during CO2RR and HER. More significantly, based on the energy span model, we demonstrate that the selectivity for CO2 fixation over proton reduction results from a higher activation energy for yielding the manganese dihydrogen intermediate before H2 release, which is the TOF determining transition state (TDTS) under an applied potential of Φ = -1.82 V versus Fc0/+. The calculated TOF also reflects the selectivity for CO2RR, which is four orders of magnitude larger than for HER, consistent with the CPE experiments that show no hydrogen was obtained. In the case of CO2 reduction, the TOF determining intermediate (TDI) corresponds to the doubly reduced active catalyst, 1C2(red2), which features a manganese(0) center that couples ferromagnetically with one unpaired electron in the π* orbital of bipyridine. On the other hand, for HER, the metal-hydride intermediate, 1C2(I11-R), is the TDI. Finally, second-order perturbation analyses imply that the strongest hydrogen bonding-like interaction at the C2 position in 1+ contributes to the higher catalytic activity with respect to [Mn[bpyMe(ImMe2)](CO)3Br]+ (2+) and [Mn[bpyMe(ImMe4)](CO)3Br]+ (3+) for CO2 fixation, consistent with the experimental data.

Enhanced Molecular CO2 Electroreduction Enabled by a Flexible Hydrophilic Channel for Relay Proton Shuttling

The effects of primary and second coordination spheres on molecular electrocatalysis have been extensively studied, yet investigations of third functional spheres are rarely reported. Here, an electrocatalyst (ZnPEG8T) was developed with a hydrophilic channel as a third functional sphere that facilitates relay proton shuttling to the primary and second coordination spheres for enhanced catalytic CO₂ reduction. Using foot-of-the-wave analysis, the ZnPEG8T catalyst displayed CO₂ -to-CO activity (TOF_max ) thirty times greater than that of the benchmark catalyst without a third functional sphere. A kinetic isotopic effect (KIE) study, in conjunction with voltammetry and UV/Vis spectroscopy, uncovered that the rate-limiting step was not the protonation step of the metallocarboxylate intermediate, as observed in many other molecular CO₂ reduction electrocatalysts, but rather the replenishment of protons in the proton-shuttling channel. Controlled-potential electrolysis using ZnPEG8T displayed a faradaic efficiency of 100 % for CO₂ -to-CO conversion at -2.4 V vs. Fc/Fc⁺ . A Tafel plot was also generated for a comparison to other reported molecular catalysts. This report validates a strategy for incorporating higher functional spheres for enhanced catalytic efficiency in proton-coupled electron-transfer reactions.

Electrode Materials Engineering in Electrocatalytic CO2 Reduction: Energy Input and Conversion Efficiency

Electrocatalytic CO₂ reduction (ECR) is a promising technology to simultaneously alleviate CO₂ -caused climate hazards and ever-increasing energy demands, as it can utilize CO₂ in the atmosphere to provide the required feedstocks for industrial production and daily life. In recent years, substantial progress in ECR systems has been achieved by the exploitation of various novel electrode materials. The anodic materials and cathodic catalysts that have, respectively, led to high-efficiency energy input and effective heterogenous catalytic conversion in ECR systems are comprehensively reviewed. Based on the differences in the nature of energy sources and the role of materials used at the anode, the fundamentals of ECR systems, including photo-anode-assisted ECR systems and bio-anode-assisted ECR systems, are explained in detail. Additionally, the cathodic reaction mechanisms and pathways of ECR are described along with a discussion of different design strategies for cathode catalysts to enhance conversion efficiency and selectivity. The emerging challenges and some perspective on both anode materials and cathodic catalysts are also outlined for better development of ECR systems.

Organic-Inorganic Hybrid Nanomaterials for Electrocatalytic CO2 Reduction

Electrochemical CO₂ reduction (ECR) to value-added chemicals and fuels is regarded as an effective strategy to mitigate climate change caused by CO₂ from excess consumption of fossil fuels. To achieve CO₂ conversion with high faradaic efficiency, low overpotential, and excellent product selectivity, rational design and synthesis of efficient electrocatalysts is of significant importance, which dominates the development of ECR field. Individual organic molecules or inorganic catalysts have encountered a bottleneck in performance improvement owing to their intrinsic shortcomings. Very recently, organic-inorganic hybrid nanomaterials as electrocatalysts have exhibited high performance and interesting reaction processes for ECR due to the integration of the advantages of both heterogeneous and homogeneous catalytic processes, attracting widespread interest. In this work, the recent advances in designing various organic-inorganic hybrid nanomaterials at the atomic and molecular level for ECR are systematically summarized. Particularly, the reaction mechanism and structure-performance relationship of organic-inorganic hybrid nanomaterials toward ECR are discussed in detail. Finally, the challenges and opportunities toward controlled synthesis of advanced electrocatalysts are proposed for paving the development of the ECR field.