Simulation-guided engineering of an enzyme-powered three dimensional DNA nanomachine for discriminating single nucleotide variants

A close-looped DNAzyme walker with an available catalytic domain for electrochemiluminescent detection of acetamiprid

Traditional DNA walkers face enormous challenges due to limited biostability and reaction kinetics. Herein, we designed a self-driven close-looped DNAzyme walker (cl-DW) with high structural biostability and catalytic activity that enabled rapid electrochemiluminescence (ECL) detection of pesticide residue acetamiprid. Specifically, cl-DW exhibited increasing ability to resist nuclease degradation with a 570-fold longer half-degradation time than that of the single-stranded DNAzyme walker (ss-DW) due to the protected DNA terminal. Furthermore, cl-DW achieved high catalytic activity with a 4.3-fold faster reaction kinetic than that of ss-DW due to the circularized nanostructure of an available catalytic domain. Consequently, we utilized cl-DW as a signal amplifier and tin-based sulfide (SnS2) nanoflowers as ECL emitters to construct an ECL aptasensor, which realized the sensitive detection of acetamiprid with a limit of detection of 0.85 nM. This work provides a reliable approach to exploring DNA walkers with high catalytic activity and better biostability for molecular monitoring.

Proximity hybridization induced molecular machine for signal-on electrochemical detection of α-synuclein oligomers

α-synuclein oligomer is a marker of Parkinson's disease. The traditional enzyme-linked immunosorbent assay for α-synuclein oligomer detection is not conducive to large-scale application due to its time-consuming, high cost and poor stability. Recently, DNA-based biosensors have been increasingly used in the detection of disease markers due to their high sensitivity, simplicity and low cost. In this study, based on the DNAzyme-driven DNA bipedal walking method, we developed a signal-on electrochemical sensor for the detection of α-syn oligomers. Bipedal DNA walkers have a larger walking area and faster walking kinetics, providing higher amplification efficiency compared to conventional DNA walkers. The DNA walker is driven via an Mg2+-dependent DNAzyme, and the binding-induced DNA walker will continuously clamp the MB, resulting in the proliferation of Fc confined near the GE surface. The linear range and limit of detection were 1 fg/mL to 10 pg/mL and 0.57 fg/mL, respectively. The proposed signal-on electrochemical sensing strategy is more selective. It will play a significant role in the sensitive and precise electrochemical analysis of other proteins.

Discrimination of Multiple Homologous Sequences Based on DNA Logic Gate and Elemental Labeling Technology

The simultaneous discrimination of multiple homologous sequences faces challenges due to the high similarity of sequences and the complexity of the discrimination system in most reported works. Herein, a simple and ingenious analysis method was developed to identify eight miRNAs of the let-7 family by combining logic gates and entropy-driven catalytic (EDC)-based lanthanide labeling inductively coupled plasma mass spectrometry (ICP-MS) technology. Specifically, eight miRNAs were first divided into four types according to the difference of bases in the domains 2 and 3 on sequences. To identify the type of targets, a DNA logic gate was constructed with two strand displacement reactions on magnetic beads that could be initiated by different types of targets. Based on the difference of the output signals after two strand displacement reactions, the type of targets was distinguished preliminarily. Then, the discrimination of a specific target was achieved with EDC-based lanthanide labeling ICP-MS detection. By labeling the different magnetic probes with different elemental tags, a specific element signal released from magnetic beads after EDC could be detected by ICP-MS, and therefore, simultaneous detection of homologous sequences was completed. This work provided a novel and simple method for highly specific identification of homologous sequences with the assistance of a logic gate and can promote further development of elemental labeling ICP-MS in the field of multiple analysis.

Construction of an Enzymatically Controlled DNA Nanomachine for One-Step Imaging of Telomerase in Living Cells

Telomerase is a basic reverse transcriptase that maintains the telomere length in cells, and accurate and specific sensing of telomerase in living cells is critical for medical diagnostics and disease therapeutics. Herein, we demonstrate for the first time the construction of an enzymatically controlled DNA nanomachine with endogenous apurinic/apyrimidinic endonuclease 1 (APE1) as a driving force for one-step imaging of telomerase in living cells. The DNA nanomachine is designed by rational engineering of substrate probes and reporter probes embedded with an enzyme-activatable site (i.e., AP site) and their subsequent assembly on a gold nanoparticle (AuNP). Upon recognition and cleavage of the AP site in the substrate probe by APE1, the loop of the substrate probe unfolds, exposing telomeric primer (TP) with the 3'-OH end. Subsequently, the TP is elongated by telomerase at the 3'-OH end to generate a long telomeric product. The resultant telomeric product acts as a swing arm that can hybridize with a reporter probe to initiate the APE1-powered walking reaction, ultimately generating a significantly enhanced fluorescence signal. Notably, endogenous APE1 is used as the driving force of the DNA nanomachine, avoiding the introduction of exogenous auxiliary cofactors into the cellular microenvironment. Owing to the high kinetics and high amplification efficiency of the APE1-powered DNA nanomachine, this strategy enables one-step sensitive sensing of telomerase in vitro and in vivo. It can successfully discriminate telomerase activity between cancer cells and normal cells, screen telomerase inhibitors, and monitor the variations of telomerase activity in living cells, offering a prospective platform for molecular diagnostics and drug discovery.

Silver-Coordinated Watson-Crick Pairing-Driven Three-Dimensional DNA Walker for Locus-Specific Detection of Genomic N6-Methyladenine and N4-Methylcytosine at the Single-Molecule Level

N6-Methyladenine (6mdA) and N4-methylcytosine (4mdC) are the two most dominant DNA modifications in both prokaryotes and eukaryotes, but standard hybridization-based techniques cannot be applied for the 6mdA/4mdC assay. Herein, we demonstrate the silver-coordinated Watson-Crick pairing-driven three-dimensional (3D) DNA walker for locus-specific detection of genomic 6mdA/4mdC at the single-molecule level. 6mdA-DNA and 4mdC-DNA can selectively hybridize with the binding probes (BP1 and BP2) to form 6mdA-DNA-BP1 and 4mdC-DNA-BP2 duplexes. The 6mdA-C/4mdC-A mismatches cannot be stabilized by AgI, and thus, 18-nt BP1/BP2 cannot be extended by the catalysis of KF exonuclease. Through toehold-mediated strand displacement (TMSD), the signal probe (SP1/SP2) functionalized on the gold nanoparticles (AuNPs) can competitively bind to BP1/BP2 in 6mdA-DNA-BP1/4mdC-DNA-BP2 duplex to obtain SP1-18-nt BP1 and SP2-18-nt BP2 duplexes. The resulting DNA duplexes can act as the substrates of lambda exonuclease, leading to the cleavage of SP1/SP2 and the release of Cy3/Cy5 and 18-nt BP1/BP2. The released 18-nt BP1/BP2 can subsequently serve as the walker DNA, moving along the surface of the AuNP to activate dynamic 3D DNA walking and releasing abundant Cy3/Cy5. The released Cy3/Cy5 can be quantified by single-molecule imaging. This nanosensor exhibits high sensitivity with a limit of detection (LOD) of 9.80 × 10-15 M for 6mdA-DNA and 9.97 × 10-15 M for 4mdC-DNA. It can discriminate 6mdA-/4mdC-DNA from unmodified genomic DNAs, distinguish 0.01% 6mdA-/4mdC-DNA from excess unmethylated DNAs, and quantify 6mdA-/4mdC-DNA at specific sites in genomic DNAs of liver cancer cells and Escherichia coli plasmid cloning vector, providing a new platform for locus-specific analysis of 6mdA/4mdC in genomic DNAs.

Spherical nucleic acid enzyme programmed network to accelerate CRISPR assays for electrochemiluminescence biosensing applications

Given the targeted binding ability and cleavage activity of the emerging CRISPR/Cas12a assay which transduces the target into its cleavage activity exhibited broadly prospective applications in integrated sensing and actuating system. Here, we elaborated a universal approach to quickly activate CRISPR/Cas12a for low-abundance biomarker detection based on the amplification strategy of a target-induced spherical nucleic acid enzyme (SNAzyme) network that could accelerate the output of activators. Specifically, multifunctional Y-shaped probes and hairpin probes (HPs, which contained the specific sequence of the activators of CRISPR/Cas12a and the substrate chain of DNAzyme) were rationally designed to construct SNAzyme. Target recognition induced disassembly of the Y-shaped probes, which released DNAzyme strands to active DNAzyme and accompanied by SNAzyme self-assembly into SNAzyme network. Interestingly, compared with randomly dispersed SNAzyme, the reaction kinetics of the SNAzyme network enhanced 1.6 times in response to Α-methyl acyl-CoA racemase (AMACR, a biomarker for prostate cancer), which was attributed to the promoted catalytic efficiency of DNAzyme by the confined SNAzyme network. Benefiting from these, the prepared biosensor based on electrochemiluminescence (ECL) platform by loading AuAg nanoclusters (AuAgNCs) into metal-organic framework-5 (MOF-5) exhibited satisfying detection performance for AMACR with a wide linear range (0.001 μg/mL to 100 μg/mL) and a low detection limit (1.0 × 10-4 μg/mL, which exhibited significant potential in clinical diagnoses.

Moving dynamics of a nanorobot with three DNA legs on nanopore-based tracks

DNA nanorobots have garnered increasing attention in recent years due to their unique advantages of modularity and algorithm simplicity. To accomplish specific tasks in complex environments, various walking strategies are required for the DNA legs of the nanorobot. In this paper, we employ computational simulations to investigate a well-designed DNA-legged nanorobot moving along a nanopore-based track on a planar membrane. The nanorobot consists of a large nanoparticle as the robot core and three single-stranded DNAs (ssDNAs) as the robot legs. The nanopores linearly embedded in the membrane serve as the toeholds for the robot legs. A charge gradient along the pore distribution mainly powers the activation of the nanorobot. The nanorobot can move in two modes: a walking mode, where the robot legs sequentially enter the nanopores, and a jumping mode, where the robot legs may skip a nanopore to reach the next one. Moreover, we observe that the moving dynamics of the nanorobot on the nanopore-based tracks depends on pore-pore distance, pore charge gradient, external voltage, and leg length.

Mismatch-Guided Deoxyribonucleic Acid Assembly Enables Ultrasensitive and Multiplex Detection of Low-Allele-Fraction Variants in Clinical Samples

Somatic mutations are important signatures in clinical cancer treatment. However, accurate detection of rare somatic mutations with low variant-allele frequencies (VAFs) in clinical samples is challenging because of the interference caused by high concentrations of wild-type (WT) sequences. Here, we report a post amplification SNV-specific DNA assembly (PANDA) technology that eliminates the high concentration pressure caused by WT through a mismatch-guided DNA assembly and enables the ultrasensitive detection of cancer mutations with VAFs as low as 0.1%. Because it generates an assembly product that only exposes a single-stranded domain with the minimal length for signal readout and thus eliminates possible interferences from secondary structures and cross-interactions among sequences, PANDA is highly versatile and expandable for multiplex testing. With ultrahigh sensitivity, PANDA enabled the quantitative analysis of EGFR mutations in cell-free DNA of 68 clinical plasma samples and four pleuroperitoneal fluid samples, with test results highly consistent with NGS deep sequencing. Compared to digital PCR, PANDA returned fewer false negatives and ambiguous cases of clinical tests. Meanwhile, it also offers much lower upfront instrumental and operational costs. The multiplexity was demonstrated by developing a 3-plex PANDA for the simultaneous analysis of three EGFR mutations in 54 pairs of tumor and the adjacent noncancerous tissue samples collected from lung cancer patients. Because of the ultrahigh sensitivity, multiplexity, and simplicity, we anticipate that PANDA will find wide applications for analyzing clinically important rare mutations in diverse devastating diseases.

Sensitive Electrochemical Sensor for Glycoprotein Detection Using a Self-Serviced-Track 3D DNA Walker and Catalytic Hairpin Assembly Enzyme-Free Signal Amplification

Approaches for the detection of targets in the cellular microenvironment have been extensively developed. However, developing a method with sensitive and accurate analysis for noninvasive cancer diagnosis has remained challenging until now. Here, we reported a sensitive and universal electrochemical platform that integrates a self-serviced-track 3D DNA walker and catalytic hairpin assembly (CHA) triggering G-Quadruplex/Hemin DNAzyme assembly signal amplification. In the presence of a target, the aptamer recognition initiated the 3D DNA walker on the cell surface autonomous running and releasing DNA (C) from the triple helix. The released DNA C as the target-triggered CHA moiety, and then G-quadruplex/hemin, was formed on the surface of electrode. Eventually, a large amount of G-quadruplex/hemin was formed on the sensor surface to generate an amplified electrochemical signal. Using N-acetylgalactosamine as a model, benefiting from the high selectivity and sensitivity of the self-serviced-track 3D DNA walker and the CHA, this designed method showed a detection limit of 39 cell/mL and 2.16 nM N-acetylgalactosamine. Furthermore, this detection strategy was enzyme free and exhibited highly sensitive, accurate, and universal detection of a variety of targets by using the corresponding DNA aptamer in clinical sample analysis, showing potential for early and prognostic diagnostic application.

A microfluidic chip-based multivalent DNA walker amplification biosensor for the simultaneous detection of multiple food-borne pathogens

The rapid, simultaneous, sensitive detection of the targets has important application prospects for disease diagnosis and biomedical studies. However, in practical applications, the content of the targets is usually very low, and signal amplification strategies are often needed to improve the detection sensitivity. DNAzyme-driven DNA walkers are an excellent signal amplification strategy due to their outstanding specificity and sensitivity. Food-borne pathogens have always been a foremost threat to human health, and it is an urgent demand to develop a simple, rapid, sensitive, and portable detection method for food-borne pathogens. In addition, there are various species of pathogens, and it is difficult to simultaneously detect multiple pathogens by a single DNA walker. For this reason, a substrate strand with three rA cleavage sites was cleverly designed, and a multivalent DNA walker sensor combined with the microfluidic chip technology was proposed for the simultaneous, rapid, sensitive analysis of Vibrio parahaemolyticus, Salmonella typhimurium, and Staphylococcus aureus. The developed sensor could be used to detect pathogens simultaneously and efficiently with low detection limits and wide detection ranges. Moreover, the combination of gold stirring rod enrichment and DNA walker achieved double amplification, which greatly improved the detection sensitivity. More importantly, by changing the design of the substrate chain, the sensor was expected to be used to detect other targets, thus broadening the scope of practical applications. Therefore, the sensor can build novel detection tool platforms in the field of biosensing.

A Telomerase-Assisted Strategy for Regeneration of DNA Nanomachines in Living Cells

DNA nanomachines have been engineered into diverse personalized devices for diagnostic imaging of biomarkers; however, the regeneration of DNA nanomachines in living cells remains challenging. Here, we report an ingenious DNA nanomachine that can implement telomerase (TE)-activated regeneration in living cells. Upon apurinic/apyrimidinic endonuclease 1 (APE1)-responsive initiation of the nanomachine, the walker of the nanomachine moves along tracks regenerated by TE, generating multiply amplified signals through which APE1 can be imaged in situ. Additionally, augmentation of the signal due to the regeneration of the nanomachines could reveal differential expression of TE in different cell lines. To the best of our knowledge, this is the first proof-of-concept demonstration of the use of biomarkers to assist in the regeneration of nanomachines in living cells. This study offers a new paradigm for the development of more applicable and efficient DNA nanomachines.

Aluminum(III)-Based Organic Nanofibrous Gels as an Aggregation-Induced Electrochemiluminescence Emitter Combined with a Rigid Triplex DNA Walker as a Signal Magnifier for Ultrasensitive DNA Assay

Due to effective tackling of the problems of aggregation-caused quenching of traditional ECL emitters, aggregation-induced electrochemiluminescence (AIECL) has emerged as a research hotspot in aqueous detection and sensing. However, the existing AIECL emitters still encounter the bottlenecks of low ECL efficiency, poor biocompatibility, and high cost. Herein, aluminum(III)-based organic nanofibrous gels (AOGs) are used as a novel AIECL emitter to construct a rapid and ultrasensitive sensing platform for the detection of Flu A virus biomarker DNA (fDNA) with the assistance of a high-speed and hyper-efficient signal magnifier, a rigid triplex DNA walker (T-DNA walker). The proposed AOGs with three-dimensional (3D) nanofiber morphology are assembled in one step within about 15 s by the ligand 2,2':6',2″-terpyridine-4'-carboxylic acid (TPY-COOH) and cheap metal ion Al³⁺, which demonstrates an efficient ECL response and outstanding biocompatibility. Impressively, on the basis of loop-mediated isothermal amplification-generated hydrogen ions (LAMP-H⁺), the target-induced pH-responsive rigid T-DNA walker overcomes the limitations of conventional single or duplex DNA walkers in walking trajectory and efficiency due to the entanglement and lodging of leg DNA, exhibiting high stability, controllability, and walking efficiency. Therefore, AOGs with excellent AIECL performance were combined with a CG-C⁺ T-DNA nanomachine with high walking efficiency and stability, and the proposed "on-off" ECL biosensor displayed a low detection limit down to 23 ag·μL^-1 for target fDNA. Also, the strategy provided a useful platform for rapid and sensitive monitoring of biomolecules, considerably broadening its potential applications in luminescent molecular devices, clinical diagnosis, and sensing analysis.

Programmable mismatch-fueled high-efficiency DNA signal amplifier

Herein, by introducing mismatches, a high-efficiency mismatch-fueled catalytic multiple-arm DNA junction assembly (M-CMDJA) with high-reactivity and a high-threshold is developed as a programmable DNA signal amplifier for rapid detection and ultrasensitive intracellular imaging of miRNA. Compared with traditional nucleic acid signal amplification (NASA) with a perfect complement, the M-CMDJA possesses larger kinetic and thermodynamic favorability owing to the more negative reaction standard free energy (ΔG) as driving force, resulting in much higher efficiency and rates. Once traces of the input initiator react with the mismatched substrate DNA, it could be converted into amounts of output multiple-arm DNA junctions via the M-CMDJA as the functional DNA conversion nanodevice. Impressively, the mismatch-fueled catalytic four-arm DNA junction assembly (M-CFDJA) exhibits high conversion efficiency up to 1.05 × 108 in 30 min, which is almost ten times more than those of conventional methods. Therefore, the M-CMDJA could easily address the challenges of traditional methods: slow rates and low efficiency. In application, the M-CFDJA as a DNA signal amplifier was successfully used to develop a biosensing platform for rapid miRNA detection with a LOD of 6.11 aM and the ultrasensitive intracellular imaging of miRNA, providing a basis for the next-generation of versatile DNA signal amplification methods for ultimate applications in DNA nanobiotechnology, biosensing assay, and clinical diagnoses.

Construction of Fast-Walking Tetrahedral DNA Walker with Four Arms for Sensitive Detection and Intracellular Imaging of Apurinic/Apyrimidinic Endonuclease 1

Herein, a novel tetrahedral DNA walker with four arms was engineered to travel efficiently on the 3D-tracks via catalyzed hairpin assembly autonomously, realizing the sensitive detection and activity assessment as well as intracellular imaging of apurinic/apyrimidinic endonuclease 1 (APE1). In contrast to traditional DNA walkers, the tetrahedral DNA walker with the rigid 3D framework structure and nonplanar multi-sites walking arms endowed with high collision efficiency, showing a fast walking rate and high nuclease resistance. Impressively, the initial rate of the tetrahedral DNA walker with four arms was 4.54 times faster than that of the free bipedal DNA walker and produced a significant fluorescence recovery in about 40 min, achieving a sensitive detection of APE1 with a low detection limit of 5.54× 10^-6 U/μL as well as ultrasensitive intracellular APE1 fluorescence activation imaging. This strategy provides a novel DNA walker for accurate identification of low-abundance cancer biomarker and potential medical diagnosis.

DNA Walkers for Biosensing Development

The ability to design nanostructures with arbitrary shapes and controllable motions has made DNA nanomaterials used widely to construct diverse nanomachines with various structures and functions. The DNA nanostructures exhibit excellent properties, including programmability, stability, biocompatibility, and can be modified with different functional groups. Among these nanoscale architectures, DNA walker is one of the most popular nanodevices with ingenious design and flexible function. In the past several years, DNA walkers have made amazing progress ranging from structural design to biological applications including constructing biosensors for the detection of cancer-associated biomarkers. In this review, the key driving forces of DNA walkers are first summarized. Then, the DNA walkers with different numbers of legs are introduced. Furthermore, the biosensing applications of DNA walkers including the detection- of nucleic acids, proteins, ions, and bacteria are summarized. Finally, the new frontiers and opportunities for developing DNA walker-based biosensors are discussed.

Engineering DNA walkers for bioanalysis: A review

Considerable advances have been made in the design, modularization, functionalization, and regulation of DNA nanostructures over the past 40 years. These advances have accelerated the development of DNA nanomachines such as DNA walkers, dynamic nanomachines with walking feet, tracks, and driven forces, which have highly sensitive detection and signal amplification abilities that can be applied to various bioanalytical contexts and therapeutic strategies. Here, we describe a rational design of the nano-bio interface, the kinetics of DNA walkers and the strategies for improving their efficiency and sensitivity. We also outline the various bioanalytic and imaging applications to which DNA walkers have been applied, such as electrochemical and optical measurements, when integrated with other simulation and activation tools. Finally, we compare the performances of novel DNA walker-based strategies for bioanalysis and propose a method to improve DNA walker design.

A Self-Serviced-Track 3D DNA Walker for Ultrasensitive Detection of Tumor Exosomes by Glycoprotein Profiling

Sensitive and accurate analysis of low-concentration of tumor-derived exosomes (Exos) in biofluids is essential for noninvasive cancer diagnosis but is still challenging due to the lack of high-sensitive methods with low-cost and easy-operation. Herein, exploiting target Exos as a three-dimensional (3D) track for the first time, we developed a self-serviced-track DNA walker (STDW) for wash-free detection of tumor Exos using exosomal glycoprotein, which was enabled by split aptamer-recognition-initiated autonomous running powered by a catalytic hairpin assembly (CHA). Benefiting from high selectivity and sensitivity of the STDW assay, direct detection of tumor Exos in cell culture medium and serum could also be realized. Furthermore, this method exhibited high accuracy in clinical sample analysis, offering the potential for early cancer diagnosis and postoperative response prediction.

Molecular dynamics simulation‐guided toehold mediated strand displacement probe for single‐nucleotide variants detection

Single nucleotide variant (SNV) has become an emerging biomarker for various diseases such as cancers and infectious diseases. Toehold‐mediated strand displacement (TMSD), the core reaction of DNA nanotechnology, has been widely leveraged to identify SNVs. However, inappropriate choice of mismatch location results in poor discrimination ability. Here, we comprehensively investigate the effect of mismatch location on TMSD kinetics by molecular dynamic simulation tool oxDNA through umbrella sampling and forward flux sampling disclosing that mismatches at the border of the toehold and branch migration domain yield the lowest TMSD reaction rate. Nine disease‐related SNVs (SARS‐CoV‐2‐D614G, EGFR‐L858R, EGFR‐T790M, KRAS‐G12R, etc.) were tested experimentally showing a good agreement with simulation. The best choice of mismatch location enables high discrimination factor with a median of 124 for SNV and wild type. Coupling with a probe‐sink system, a low variant allele frequency of 0.1% was detected with 3 S/N. We successfully used the probes to detect SNVs with high confidence in the PCR clones of constructed plasmids. This work provides mechanistic insights into TMSD process at the single‐nucleotide level and can be a guidance for the design of TMSD system with fine‐tuning kinetics for various applications in biosensors and nanotechnology.

Copper nanocluster-Ru(dcbpy)32+ as a cathodic ECL-RET probe combined with 3D bipedal DNA walker amplification for bioanalysis

In this study, an intra-molecular ECL-RET probe combining the 3D bipedal DNA walker amplification strategy was exquisitely designed to monitor platelet-derived growth factor BB (PDGF-BB).

A core-brush 3D DNA nanostructure: the next generation of DNA nanomachine for ultrasensitive sensing and imaging of intracellular microRNA with rapid kinetics

A highly loaded and integrated core–brush three-dimensional (3D) DNA nanostructure is constructed by programmatically assembling a locked DNA walking arm (DA) and hairpin substrate (HS) into a repetitive array along a well-designed DNA track generated by rolling circle amplification (RCA) and is applied as a 3D DNA nanomachine for rapid and sensitive intracellular microRNA (miRNA) imaging and sensing. Impressively, the homogeneous distribution of the DA and HS at a ratio of 1 : 3 on the DNA track provides a specific walking range for the DA to avoid invalid and random self-walking and notably improve the executive ability of the core–brush 3D DNA nanomachine, which easily solves the major technical challenges of traditional Au-based 3D DNA nanomachines: low loading capacity and low executive efficiency. As a proof of concept, the interaction of miRNA with the 3D DNA nanomachine could initiate the autonomous and progressive operation of the DA to cleave the HS for ultrasensitive ECL detection of target miRNA-21 with a detection limit as low as 3.57 aM and rapid imaging in living cells within 15 min. Therefore, the proposed core–brush 3D DNA nanomachine could not only provide convincing evidence for sensitive detection and rapid visual imaging of biomarkers with tiny change, but also assist researchers in investigating the formation mechanism of tumors, improving their recovery rates and reducing correlative complications. This strategy might enrich the method to design a new generation of 3D DNA nanomachine and promote the development of clinical diagnosis, targeted therapy and prognosis monitoring.

This study designed a highly loaded and integrated core–brush 3D DNA nanomachine for miRNA imaging and sensing, which easily solves the major technical challenges of traditional Au-based 3D nanomachines: low loading capacity and low executive efficiency.

Integration of exonuclease III-powered three-dimensional DNA walker with single-molecule detection for multiple initiator caspases assay

Initiator caspases are important components of cellular apoptotic signaling and they can activate effector caspases in extrinsic and intrinsic apoptotic pathways. The simultaneous detection of multiple initiator caspases is essential for apoptosis mechanism studies and disease therapy. Herein, we develop a sensitive nanosensor based on the integration of exonuclease III (Exo III)-powered three-dimensional (3D) DNA walker with single-molecule detection for the simultaneous measurement of initiator caspase-8 and caspase-9. This assay involves two peptide-DNA detection probe-conjugated magnetic beads and two signal probe-conjugated gold nanoparticles (signal probes@AuNPs). The presence of caspase-8 and caspase-9 can induce the cleavage of peptides in two peptide-DNA detection probes, releasing two trigger DNAs from the magnetic beads, respectively. The two trigger DNAs can serve as the walker DNA to walk on the surface of the signal probes@AuNPs powered by Exo III digestion, liberating numerous Cy5 and Texas Red fluorophores which can be quantified by single-molecule detection, with Cy5 indicating caspase-8 and Texas Red indicating caspase-9. Notably, the introduction of the AuNP-based 3D DNA walker greatly reduces the background signal and amplifies the output signals, and the introduction of single-molecule detection further improves the detection sensitivity. This nanosensor is very sensitive with a detection limit of 2.08 × 10-6 U μL-1 for caspase-8 and 1.71 × 10-6 U μL-1 for caspase-9, and it can be used for the simultaneous screening of caspase inhibitors and the measurement of endogenous caspase activity in various cell lines at the single-cell level. Moreover, this nanosensor can be extended to detect various proteases by simply changing the peptide sequences of the detection probes.

Stimuli-Responsive Three-Dimensional DNA Nanomachines Engineered by Controlling Dynamic Interactions at Biomolecule-Nanoparticle Interfaces

Stimuli-responsive nanomachines are attractive tools for biosensing, imaging, and drug delivery. Herein, we demonstrate that the orientation of macromolecules and subsequent dynamic interactions at the biomolecule-nanoparticle (bio-nano) interfaces can be rationally controlled to engineer stimuli-responsive DNA nanomachines. The success of this design principle was demonstrated by engineering a series of antibody-responsive DNA walkers capable of moving persistently on a three-dimensional track made of DNA functionalized gold nanoparticles. We show that drastically different responses to antibodies could be achieved using DNA walkers of identical sequences but with varying number or sites of modifications. We also show that multiple interfacial factors could be combined to engineer stimuli-responsive DNA nanomachines with high sensitivity and modularity. The potential of our strategy for practical uses was finally demonstrated for the amplified detection of antibodies and small molecules in both buffer and human serum samples. Unlike many DNA-based nanomachines, the performance of which could be significantly hindered by the matrix of serum, our system shows a matrix-enhanced sensitivity as a result of the engineering approach at the bio-nano interface.

Chemoselective ligation assisted DNA walker for analysis of double targets

Chemoselective ligation assisted DNA walker with input and output of double signals, has been constructed through simultaneous assistance of oxime chemistry and alkyne-azide cycloaddition. The constructed DNA walker has been further developed as a biosensor with lipopolysaccharide (LPS) and 5-hydroxymethyl-2-furaldehyde (HMF) as targets. The biosensor owns one-to-one mapping functionality and can sensitively distinguish all cases of two targets through the unique output signal feature. Moreover, the biosensor can simultaneously analyze LPS and HMF. This work provides a new insight for analysis of double targets based on chemoselective ligation assisted DNA walker.

An enzyme-powered, three-dimensional lame DNA walker

Molecular machines constructed by three-dimensional (3-D) DNA walker have emerged as a hot topic in applications such as novel biosensors, cargo delivery platforms and intracellular imaging. Herein, we first propose a lame DNA walker that can randomly and autonomously move on microsphere-based 3-D track. The stochastic lame walker has a long leg mainly responsible for persistent movement and a short leg cutting substrates rapidly. Its motion is propelled by a nicking endonuclease cleavage of hybridized DNA tracks. Kinetic and persistent study show that the lame DNA walker enables reaction equilibrium at 30 min, need a cleat domain of at least 14 nucleotides and can persistently move on 3-D tracks with an average rate of 6.467 × 10^-11 M s^-1. We also demonstrate that the lame walker can be used to detect target DNA in the detection range of 10 pM-5 nM with high specificity by toehold exchange mechanism. This work will further expand the performance of 3-D DNA walkers and substantially contributes to the improved understanding of DNA walking systems.

Paper-Based Bipolar Electrode Electrochemiluminescence Platform for Detection of Multiple miRNAs

This paper introduces a novel potential-resolved paper-based biosensor for simultaneous detection of multiple microRNAs (miRNAs) (taking miRNA-155 and miRNA-126 as examples) based on the bipolar electrode (BPE) electrochemiluminescence (ECL) strategy. The proposed multiple-channel paper-based sensing microfluidic platform was prepared by wax-printing technology, screen-printing method, and in situ Au nanoparticles (AuNPs) growth to form hydrophilic areas, hydrophobic boundaries, waterproof electronic bridge, driving electrode regions, and parallel bipolar electrode regions. CdTe quantum dots (QDs)-H2 and Au@g-C₃N₄ nanosheets (NSs)-DNA1 were used as dual electrochemiluminescence signal probes, and carboxylated Fe₃O₄ magnetic nanoparticles existed as carriers. CdTe QDs-H2/S₂O₈^2- and Au@g-C₃N₄ NSs-DNA1/S₂O₈^2- could exhibit two strong and stable ECL emissions at a drive voltage of 9 and 12 V, respectively, which can be used as effective potential-resolved signal tags. In addition, the proposed three-dimensional (3D) DNA nanomachine model and the target miRNA cycle strategy were used to achieve double amplification of electrochemiluminescence intensity. More importantly, the combination of the bipolar electrode system and the potential-resolved multitarget electrochemiluminescence method can greatly reduce the spatial interference between substances. The prepared ECL biosensor showed a favorable linear response for the detection of miRNA-155 and miRNA-126 with relatively low detection limits of 5.7 and 4.2 fM, respectively. With excellent sensitivity, the strategy may provide an efficient method for clinical application, especially in detection of trace multiple targets.

Improvement of Molecular Diagnosis Using Domain-Level Single-Nucleotide Variants by Eliminating Unexpected Secondary Structures

Identification of single-nucleotide variants (SNVs) is of great significance in molecular diagnosis. The problem that should not be ignored in the identification process is that the unexpected secondary structure of the target nucleic acid may greatly affect the detection accuracy. Herein, we proposed a conditional domain-level SNV diagnosis strategy, in which the subsequent SNV detection can only be carried out after eliminating the unexpected secondary structure of target DNA. Specifically, the target DNA is assembled into a rigid double strand, which makes folding the target DNA difficult and the unexpected secondary structure is eliminated. Based on this double-stranded structure, specially designed probes are used to detect double-stranded properties and report abundant domain-level oligonucleotide information to improve the effective information in the detection results and complete domain-level SNV diagnosis. If the unexpected secondary structure is not eliminated, the detector will first detect it and feed back to us, ensuring the accuracy of the subsequent detection results. With the occurrence (or not) of SNV and the change of the SNV site, in the proof-of-concept experiment, we successfully identified the four homologous sequences to be tested related to BRAF gene.

An integrated fluorescence biosensor for microRNA detection based on exponential amplification reaction-triggered three-dimensional bipedal DNA walkers

Sensitive and specific miRNA detection is essential for the early cancer diagnosis. In this work, we design a fluorescent microRNA biosensor based on exponential amplification reaction (EXPAR) and nicking endonuclease-powered three-dimensional (3-D) bipedal DNA walkers (BDW). Target microRNA initiates EXPAR with the help of polymerase and nicking endonuclease to generate the large number of BDW in solution. The newly generated BDW can be continuously assembled onto polystyrene microsphere track co-modified with fluorescence-labeled DNA strand. Thus, in the presence of nicking endonuclease, the walking machine is activated to produce enhanced fluorescent signal in the supernatant. Besides, we prove that BDW holds the faster walking speed than single-legged DNA walker (SDW) based on comparative study. Under optimal conditions, the proposed amplification method owns a wide linear range from 10 fM to 5 nM with a detection limit down to 5.2 fM. The reaction time of the assay takes about 70 min. The combination of enzyme-assisted EXPAR in solution and enzyme-powered BDW on particle significantly increases the signal amplification efficiency and improves the detection sensitivity. Therefore, our method has enormous potential for the application of BDW-related biosensors.

Simple Tripedal DNA Walker Prepared by Target-Triggered Catalytic Hairpin Assembly for Ultrasensitive Electrochemiluminescence Detection of MicroRNA

In contrast to common DNA walkers, multipedal DNA walkers exhibit larger walking area and faster walking kinetics and provide increased amplification efficiency. Consequently, they have received a considerable amount of attention in biosensing. However, most of them are synthesized by immobilizing multiple DNA walking strands on the surface of Au nanoparticles, which is tedious and time-consuming. Simple preparation of multipedal DNA walkers remains a challenge. Herein, we adopted a simple enzyme-free target-triggered catalytic hairpin assembly (CHA) circuit to synthesize a tripedal DNA walker. By walking on a DNA track-functionalized electrode, a sensitive electrochemiluminescence DNA nanomachine biosensor was constructed for sensing miRNA-21. The DNA walker was powered by toehold-mediated strand displacement; the whole process did not need the assistance of enzymes, thus avoiding tedious procedures and enzyme degradation under unfavorable environmental conditions. Specifically, a superior detection limit of 4 aM and a broad linear range of 10 aM to 1 pM were achieved. This CHA-tripedal DNA walker biosensor was then applied for the detection of miRNA-21 in human serum and showed high selectivity and excellent reproducibility, demonstrating its practical application in bioanalysis. In particular, the Y-shaped tripedal DNA walker comes from the DNA circuit, which makes the approach ideally suited for biosensing of small nucleic acid targets.

Expanding detection windows for discriminating single nucleotide variants using rationally designed DNA equalizer probes

Combining experimental and simulation strategies to facilitate the design and operation of nucleic acid hybridization probes are highly important to both fundamental DNA nanotechnology and diverse biological/biomedical applications. Herein, we introduce a DNA equalizer gate (DEG) approach, a class of simulation-guided nucleic acid hybridization probes that drastically expand detection windows for discriminating single nucleotide variants in double-stranded DNA (dsDNA) via the user-definable transformation of the quantitative relationship between the detection signal and target concentrations. A thermodynamic-driven theoretical model was also developed, which quantitatively simulates and predicts the performance of DEG. The effectiveness of DEG for expanding detection windows and improving sequence selectivity was demonstrated both in silico and experimentally. As DEG acts directly on dsDNA, it is readily adaptable to nucleic acid amplification techniques, such as polymerase chain reaction (PCR). The practical usefulness of DEG was demonstrated through the simultaneous detection of infections and the screening of drug-resistance in clinical parasitic worm samples collected from rural areas of Honduras.

A bipedal DNA nanowalker fueled by catalytic assembly for imaging of base-excision repairing in living cells

DNA nanowalkers moving progressively along a prescribed DNA track are useful tools in biosensing, molecular theranostics and biosynthesis. However, stochastic DNA nanowalkers that can perform in living cells have been largely unexplored. We report the development of a novel stochastic bipedal DNA walker that, for the first time, realizes direct intracellular base excision repair (BER) fluorescence activation imaging. In our design, the bipedal walker DNA was generated by BER-related human apurinic/apyrimidinic endonuclease 1 (APE1)-mediated cleavage of DNA sequences at an abasic site in the intracellular environment, and it autonomously travelled on spherical nucleic acid (SNA) surfaces via catalyzed hairpin assembly (CHA). Our nanomachine outperforms the conventional single leg-based DNA walker with an improved sensitivity, kinetics and walking steps. Moreover, in contrast to the single leg-based DNA walker, the bipedal DNA walker is capable of monitoring the fluorescence signal of reduced APE1 activity, thus indicating amplified intracellular imaging. This bipedal DNA-propelled DNA walker presents a simple and modular amplification mechanism for intracellular biomarkers of interest, providing an invaluable platform for low-abundance biomarker discovery leading to the accurate identification and effective treatment of cancers.

Engineering of exosome-triggered enzyme-powered DNA motors for highly sensitive fluorescence detection of tumor-derived exosomes

Tumor-derived exosomes containing multiple proteins originating from parent cancer cells have emerged as biomarkers for cancer diagnosis. Herein, we propose a three-dimensional DNA motor-based exosome assay platform for the selective and sensitive detection of exosomes. The DNA motor used gold nanoparticle (GNP) tracks, consisting of fluorescein-labeled substrate strands and aptamer-locked motor strands. Recognition of the target protein on exosomes by its aptamer unlocked the motor strand and triggered the DNA motor process. Powered by restriction endonuclease, the motor strands autonomously walked along the GNP track. Each movement step cleaved one substrate strand and restored one fluorescein molecule. For exosome detection, the proposed method displayed a broad dynamic range acrossing 5 orders of magnitude with the detection limit as low as 8.2 particles/μL in PBS. The method also exhibited good selectivity among different tumor-derived exosomes and performed well in complex biological samples. The capability to profile exosomal surface proteins efficiently endowed our DNA motor great potential for developing a simple and cost-effective device for clinical diagnosis.

Three-Dimensional DNA Nanomachine Biosensor by Integrating DNA Walker and Rolling Machine Cascade Amplification for Ultrasensitive Detection of Cancer-Related Gene

Stochastic DNA walkers capable of traversing on three-dimensional (3D) tracks have received great deal of attention. However, DNA walker-based biosensors exhibit limited amplification efficiency because of their slow walking kinetics and low processivity. Herein, by taking advantage of the high processivity of a DNA rolling machine, a sensitive ratiometric DNA nanomachine biosensor is designed. The biosensor is constructed with hairpin-loaded Au nanoparticles (NPs) (hpDNA@AuNPs) as a DNA walker and AgNCs-decorated magnetic NPs (AgNCs@MNPs) as a DNA rolling machine. In the presence of target DNA, exonuclease III (Exo III)-powered DNA walker is activated to accomplish first-stage amplification via a burnt-bridge mechanism, generating a great deal of toehold-loaded AuNPs (Toehold@AuNPs) to hybridize with magnetic nanoparticles loaded with silver-nanoclusters-labeled DNA (AgNCs@MNPs) with the assistance of Exo III. These trigger rapid rolling of AuNPs on the AgNCs@MNPs surface and release free AgNCs, converting the biological signal into a mass spectrometric signal ratio (¹⁰⁷Ag/¹⁹⁷Au) with detection by ICP-MS. A linear range of 0.5-500 fmol L^-1 is achieved with a detection limit of 119 amol L^-1 for the p53 gene. The practical applicability of the biosensor has been demonstrated in the accurate assay of the p53 gene in the human blood.

pH-Controlled Detachable DNA Circuitry and Its Application in Resettable Self-Assembly of Spherical Nucleic Acids

Toehold-mediated strand displacement reaction, the fundamental basis in dynamic DNA nanotechnology, has proven its extraordinary power in programming dynamic molecular systems. Programmed activation of the toehold in a DNA substrate is crucial for building sophisticated DNA devices with digital and dynamic behaviors. Here we developed a detachable DNA circuit by embedding a pH-controlled intermolecular triplex between the toehold and branch migration domain of the traditional "linear substrate". The reaction rate and the "on/off" state of the detachable circuit can be regulated by varying the pHs. Similarly, a two-input circuit composed of three pH-responsive DNA modules was then constructed. Most importantly, a resettable self-assembly system of spherical nucleic acids was built by utilizing the high detachability of the intermolecular triplex structure-based DNA circuit. This work demonstrated a dynamic DNA device that can be repeatedly operated at constant temperature without generating additional waste DNA products. Moreover, this strategy showed an example of recycling waste spherical nucleic acids from a self-assembly system of spherical nucleic acids. Our strategy will provide a facile approach for dynamic regulation of complex molecular systems and reprogrammable nanoparticle assembly structures.

Dynamic DNA Assemblies in Biomedical Applications

Deoxyribonucleic acid (DNA) has been widely used to construct homogeneous structures with increasing complexity for biological and biomedical applications due to their powerful functionalities. Especially, dynamic DNA assemblies (DDAs) have demonstrated the ability to simulate molecular motions and fluctuations in bionic systems. DDAs, including DNA robots, DNA probes, DNA nanochannels, DNA templates, etc., can perform structural transformations or predictable behaviors in response to corresponding stimuli and show potential in the fields of single molecule sensing, drug delivery, molecular assembly, etc. A wave of exploration of the principles in designing and usage of DDAs has occurred, however, knowledge on these concepts is still limited. Although some previous reviews have been reported, systematic and detailed reviews are rare. To achieve a better understanding of the mechanisms in DDAs, herein, the recent progress on the fundamental principles regarding DDAs and their applications are summarized. The relative assembly principles and computer-aided software for their designing are introduced. The advantages and disadvantages of each software are discussed. The motional mechanisms of the DDAs are classified into exogenous and endogenous stimuli-triggered responses. The special dynamic behaviors of DDAs in biomedical applications are also summarized. Moreover, the current challenges and future directions of DDAs are proposed.

A photo zipper locked DNA nanomachine with an internal standard for precise miRNA imaging in living cells

DNA nanomachines are capable of converting tiny triggers into autonomous accelerated cascade hybridization reactions and they have been used as a signal amplification strategy for intracellular imaging. However, the "always active" property of most DNA nanomachines with an "absolute intensity-dependent" signal acquisition mode results in "false positive signal amplification" by extracellular analytes and impairs detection accuracy. Here we design a photo zipper locked miRNA responsive DNA nanomachine (PZ-DNA nanomachine) based on upconversion nanoparticles (UCNPs) with a photo-cleavable DNA strand to block the miRNA recognition region, which provided sufficient protection to the DNA nanomachine against nonspecific extracellular activation and allowed satisfactory signal amplification for sensitive miRNA imaging after intracellular photoactivation. Multiple emissions from the UCNPs were also utilized as an internal standard to self-calibrate the intracellular miRNA responsive fluorescence signal. The presented PZ-DNA nanomachine demonstrated the sensitive imaging of intracellular miRNA from different cell lines, which resulted in good accordance with qRT-PCR measurements, providing a universal platform for precise imaging in living cells with high spatial-temporal specificity.

Sensing Biomarkers with Plasmonics

The detection of biomarkers is critical for enabling early disease diagnosis, monitoring the progression, and tracking the effectiveness of therapeutic intervention. Plasmonic sensors exhibit a broad range of analytical capabilities, from the rapid generation of colorimetric readouts to single-molecule sensitivity in ultralow sample volumes, which have led to their increased exploration in bioanalysis and point-of-care applications. This perspective presents selected accounts of recent developments on the different types of plasmonic sensing platforms, the pervasive challenges, and outlook on the pathway to translation. We highlight the sensing of upcoming biomarkers, including microRNA, circulating tumor cells, exosomes, and cell-free DNA, and discuss the opportunity of utilizing plasmonic nanomaterials and tools for biomarker detection beyond biofluids, such as in tissues, organs, and disease sites. The integration of plasmonic biosensors with established and upcoming technologies of instrumentation, sample pretreatment, and data analysis will help realize their translation to clinical settings for improving healthcare and enhancing the quality of life.

Dynamic Programming of a DNA Walker Controlled by Protons

We have now constructed a four-legged DNA walker based on toehold exchange reactions whose movement is controlled by alternating pH changes. A well-characterized, pH-responsive CG-C⁺ triplex DNA was embedded into a tetrameric catalytic hairpin assembly (CHA) walker. The proton-controlled walker could autonomously move on otherwise unprogrammed microparticles surface, and the walking rate and steps of walking were efficiently controlled by pH. The starting and stopping of the walker, and its association and dissociation from the microparticles, could also be dynamically controlled by pH. The simple, programmable, and robust nature of this proton-controlled walker now provides the impetus for the development of a wide variety of more practical nanomachines.

Versatile Sensing Platform for Cd2+ Detection in Rice Samples and Its Applications in Logic Gate Computation

A versatile sensing platform was designed for Cd²⁺ detection utilizing Mg²⁺-dependent DNAzyme as the biocatalyst and toehold-mediated strand replacement as the reaction mechanism. The Cd²⁺-aptamer interaction brings the split subunits of the Mg²⁺-dependent DNAzyme into close-enough proximity, which generates an active DNAzyme that can catalyze the cleavage reaction toward the hairpin substrate strand (H1). The trigger DNA fragment in H1 can open another hairpin probe (H2) to activate the cyclic signal amplification process. The generated numerous G-quadruplex DNAzyme structures will produce a high fluorescence response after incubation with the fluorescence dye N-methyl mesoporphyrin IX (NMM). This detection platform is ultrasensitive and the detection limit (LOD) is 2.5 pM (S/N = 3). The sensing system is robust and can work effectively even in a complex sample matrix, enabling the quantitative analysis of Cd²⁺ content in rice samples with good reliability. Showing the unique features of simple operation, label-free and enzyme-free format, high sensitivity and selectivity, and universal signal amplification mode, our proposed sensing protocol holds great promise for becoming a competitive alternative for the routine monitoring of Cd²⁺ pollution. Importantly, this flexible and versatile sensing platform was used to construct some exquisite logic gates, including AND, OR, INHIBIT, IMPLICATION, NOR, and NAND.

Enhanced SNP-sensing using DNA-templated reactions through confined hybridization of minimal substrates (CHOMS)

DNA or RNA templated reactions are attractive for nucleic acid sensing and imaging. As for any hybridization-based sensing, there is a tradeoff between sensitivity (detection threshold) and resolution (single nucleotide discrimination). Longer probes afford better sensitivity but compromise single nucleotide resolution due to the small thermodynamic penalty of a single mismatch. Herein we report a design that overcomes this tradeoff. The reaction is leveraged on the hybridization of a minimal substrate (covering 4 nucleotides) which is confined by two guide DNAs functionalized respectively with a ruthenium photocatalyst. The use of a catalytic reaction is essential to bypass the exchange of guide DNAs while achieving signal amplification through substrate turnover. The guide DNAs restrain the reaction to a unique site and enhance the hybridization of short substrates by providing two π-stacking interactions. The reaction was shown to enable the detection of SNPs and SNVs down to 50 pM with a discrimination factor ranging from 24 to 309 (median 82, 27 examples from 3 oncogenes). The clinical diagnostic potential of the technology was demonstrated with the analysis of RAS amplicons obtained directly from cell culture.

Concentric DNA Amplifier That Streamlines In-Solution Biorecognition and On-Particle Biocatalysis

Colloidal nanoparticle biosensors capable of on-particle biocatalysis are powerful tools for amplified detection of biomolecules. The development and practical uses of such concentric amplifiers can be complicated because of the on-particle biorecognition that involves varying interfacial factors at the biomolecule-nanoparticle interfaces. Herein, we reason that a nanoparticle biosensor equipped with an in-solution biorecognition element may be better fabricated, predicted, controlled, and performed. The in-solution biorecognition shall also be streamlined with the on-particle biocatalysis so that the overall analytical and kinetic performance is not compromised. As a testbed, we introduce a concentric DNA amplifier driven by an enzyme-powered three-dimensional DNA nanomachine, where a DNA walker can be instantly assembled onto a spherical nucleic acid (SNA) track through a polyadenosine anchor. As such, the free DNA walker can participate in reactions in a homogeneous solution before assembling to the SNA track. The instant and stable assembly enabled by both adsorption and complementary base pairing also ensures rapid on-particle biocatalysis. We demonstrate that the in-solution biorecognition effectively eliminates the binding hindrance encountered by the on-particle biorecognition and thus significantly reduced energy barriers for the detection of nucleic acids and proteins. Because of the in-solution biorecognition, our system can also be plugged readily into complex DNA strand displacement networks for rapid signal amplification.

DNA Strand Displacement Reaction: A Powerful Tool for Discriminating Single Nucleotide Variants

Single-nucleotide variants (SNVs) that are strongly associated with many genetic diseases and tumors are important both biologically and clinically. Detection of SNVs holds great potential for disease diagnosis and prognosis. Recent advances in DNA nanotechnology have offered numerous principles and strategies amenable to the detection and quantification of SNVs with high sensitivity, specificity, and programmability. In this review, we will focus our discussion on emerging techniques making use of DNA strand displacement, a basic building block in dynamic DNA nanotechnology. Based on their operation principles, we classify current SNV detection methods into three main categories, including strategies using toehold-mediated strand displacement reactions, toehold-exchange reactions, and enzyme-mediated strand displacement reactions. These detection methods discriminate SNVs from their wild-type counterparts through subtle differences in thermodynamics, kinetics, or response to enzymatic manipulation. The remarkable programmability of dynamic DNA nanotechnology also allows the predictable design and flexible operation of diverse strand displacement probes and/or primers. Here, we offer a systematic survey of current strategies, with an emphasis on the molecular mechanisms and their applicability to in vitro diagnostics.

An ultrasensitive electrochemical biosensor for Pseudomonas aeruginosa assay based on a rolling circle amplification-assisted multipedal DNA walker

An ultrasensitive electrochemical biosensor was developed based on RCA and multipedal DNA walking strategy for the assay of 16S rRNA gene, and it has great application potential in food safety, environmental monitoring, and disease diagnosis.

Binding-Induced 3D-Bipedal DNA Walker for Cascade Signal Amplification Detection of Thrombin Combined with Catalytic Hairpin Assembly Strategy

As an important biomarker, thrombin (TB) is a major player in thrombosis and hemostasis and has attracted increasing attention involving its determination. Herein a universal and ultrasensitive fluorescence biosensor based on a binding-induced 3D-bipedal DNA walker and catalytic hairpin assembly (CHA) strategy has been proposed for cascade signal amplification detection of thrombin. In this study, we designed two proximity probes (foot 1 and foot 2) which include a specific affinity ligand for TB binding and a Pb²⁺-dependent DNAzyme tail sequence. In the presence of TB, the simultaneous binding of TB to foot 1 (F1) and foot 2 (F2) via TB aptamer (TBA) brings the tail sequences into close proximity and the melting temperature for tail sequences and track DNA is increased, allowing the Pb²⁺-dependent DNAzyme to cleave the track DNA into two short fragments which have lower affinities for the DNAzyme and, finally, leading to the release of trigger DNA (T-DNA) for subsequent CHA reaction. In the meantime, the dissociated DNA walkers (F1 and F2) explore adjacent unwound track DNA, and the walking procedure is conducted. Unlike the conventional unipedal DNA walkers that anchor foot DNA and track DNA on the same sensing surface, the proposed 3D-bipedal DNA walking machine can not only increase the local concentration of track DNA but can also improve the walking efficiency and expand the range of the walkers to some extent due to the two free feet. Moreover, with the advantages of superior sensitivity and excellent specificity, this biosensing platform exhibits a huge potential in practical application in biomedical research and clinical diagnosis.

Biomimetic 3D DNA Nanomachine via Free DNA Walker Movement on Lipid Bilayers Supported by Hard SiO2@CdTe Nanoparticles for Ultrasensitive MicroRNA Detection

Herein, a novel three-dimensional (3D) DNA nanomachine with high walking efficiency via free DNA walker movement on biomimetic lipid bilayers supported by hard silica@CdTe quantum dots (SiO₂@CdTe) was constructed for ultrasensitive fluorescence detection of microRNA. The synthesized SiO₂@CdTe nanoparticles were adopted as the fluorescence indicator and spherical carrier of lipid bilayers, and then the DNA substrates were anchored on lipid bilayers with biomimetic fluidity through the cholesterol-lipid interaction. Once target microRNA-141 interacted with the 3D DNA nanomachine to release cholesterol labeled arm (Chol-arm), the Chol-arm could generate a series of strand displacement reactions by moving freely on the lipid bilayers, resulting in the releasement of numerous quenchers from the SiO₂@CdTe nanoparticles and inducing a strong fluorescence signal. Impressively, compared with traditional 3D DNA nanomachine conjugating DNA substrates on hard surfaces (such as gold or silica) with limited reactivity, the proposed biomimetic 3D DNA nanomachine not only immobilized DNA substrates rapidly and effectively but also kept it with a favorable fluidity, which significantly enhanced the walking efficiency. As expected, the biomimetic 3D DNA nanomachine for fluorescence detection of microRNA-141 exhibited an excellent performance with a detection limit of 0.21 pM and presented promising properties in cell lysate detection and intracellular imaging. Thus, the described biomimetic 3D DNA nanomachine provided a novel avenue for sensitive detection of biomolecules, which could be useful for bioanalysis and early clinical diagnoses of disease.

Ultrasensitive Detection of Exosomes by Target-Triggered Three-Dimensional DNA Walking Machine and Exonuclease III-Assisted Electrochemical Ratiometric Biosensing

Exosomes are membrane-enclosed phospholipid extracellular vesicles. In spite of their great promise as noninvasive biomarkers for cancer diagnosis, sensitive detection of exosomes is still challenging. Herein, the detection of exosomes was changed to the detection of DNA after recognition of exosomes with its aptamers. CD63 aptamer and EpCAM aptamer were used for the detection of MCF-7 cell-secreted exosome. The recognition process was amplified through the movements of a three-dimensional DNA walker. And then, Exonuclease III- assisted electrochemical ratiometric sensor was applied for further signal amplification. Under optimal conditions, the detection limit of 1.3 × 10⁴ particles/mL was obtained with excellent selectivity. Furthermore, clinical application test for the detection of exosomes in human serum was also verified.