Carved nanoframes of cobalt-iron bimetal phosphide as a bifunctional electrocatalyst for efficient overall water splitting

Quick synthesis of CoFe-PBA@GO with electrochemical method as a novel, sensitive, and degradable nanocomposite applied in nanofibers for triazole extraction before HPLC-UV analysis

Today, the wide use of triazole fungicides due to environmental damage and its side effects has raised global concern. Hence, in this research, poly-vinyl alcohol/polyacrylic-acid/CoFe-PBA@GO electrospun nanofiber was synthesized and applied as effective, degradable, and novel adsorbent at pipette-tip microextraction (PT-μSPE) method for the rapid and concurrent extraction of five of triazole fungicides in fruit and vegetable samples prior to quantitative analysis by high-performance liquid chromatography-ultraviolet. The incorporation of CoFe-PBA@GO with superporous structure and abundant functional groups in a polymer medium improves the extraction efficiency of nanofibers due to hydrogen bonding and π-π interactions formed between analytes and synthesized nano-adsorbent. Various important elements that affect the extraction yield of the target analytes were optimized utilizing a time-variable approach. Under the optimum conditions, dynamic range was attained in the range of 0.3-900.0 ng/mL with correlation coefficients ≥ 0.999. The identification limit of the PT-μSPE-HPLC-UV method ranged from 0.1 to 0.3 ng/mL.

Iron-Cobalt Nanoparticles Embedded in B,N-Doped Chitosan-Derived Porous Carbon Aerogel for Overall Water Splitting

Given their intriguing properties, porous carbons have surfaced as promising electrocatalysts for various energy conversion reactions. This study presents a unique approach where iron-cobalt (FeCo) is confined in a boron, nitrogen-doped chitosan-derived porous carbon aerogel (BNPC-FeCo) to serve as an electrocatalyst for the hydrogen evolution and oxygen evolution reactions (HER and OER). The BNPC-FeCo-900 electrocatalyst demonstrates excellent catalyst activity, with very low overpotentials of 186 and 320 mV at 10 mA cm-2, low Tafel slopes of 82 and 55 mV dec-1, and low charge transfer resistance of 2.68 and 9.25 Ω for HER and OER, respectively. Density functional theory (DFT) calculations further reveal that the cooperation between the boron, nitrogen codoped porous carbon, and the FeCo nanoparticles reduces intermediates' energy barriers, significantly enhancing the HER and OER performance. In conclusion, this work offers significant and informative perspectives into the potential of porous carbon materials as dual-purpose electrocatalysts for water splitting.

A high-performance electrocatalyst via graphitic carbon nitride nanosheet-decorated bimetallic phosphide for alkaline water electrolysis

Developing renewable and clean energy systems for overall water electrolysis requires low-cost, highly efficient, and stable catalysts. With this motivation, nickel cobalt phosphorus (NiCoP) was electrodeposited onto nickel foam (NF) and then modified with graphitic carbon nitride (g-C3N4). The designed g-C3N4/NiCoP/NF electrode was used for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline water electrolysis. It exhibited a small overpotential of 80 mV@10 mA cm-2 with a Tafel slope of 89 mV dec-1 for the HER. It also exhibited an overpotential of 370 mV@10 mA cm-2 with a Tafel slope of 64 mV dec-1 for the OER. The g-C3N4/NiCoP catalyst exhibited satisfactory stability in an alkaline electrolyzer system, in which g-C3N4/NiCoP/NF was used as the anode and cathode. Meanwhile, the electrocatalyst requires only a cell voltage of 1.70 V to achieve 10 mA cm-2 current density for overall water electrolysis.

2D Ni2P/N-doped graphene heterostructure as a Novel electrocatalyst for hydrogen evolution reaction: A computational study

The main prerequisite for designing electrocatalysts with favorable performance is to examine the links between electronic structural features and catalytic activity. In this work, Ni2P as a model electrocatalyst and one of the most potent catalysts for hydrogen evolution reaction (HER) was utilized to develop various Ni2P and carbon-based (graphene and N-doped graphene) heterostructures. The characteristics of such structures (Ni2P, graphene, N-doped graphene, Ni2P/graphene, and Ni2P/N-doped graphene), including binding energies, the projected density of states (PDOS), band structure, charge density difference, charge transfer, Hirshfeld charge analysis, and minimum-energy path (MEP) towards HER were calculated and analyzed by density functional theory (DFT) approach. The coupling energy values of hybrid systems were correlated with the magnitude of charge transfer. The main factors driving a promising water-splitting reaction were explained by the data of PDOS, band structures, and charge analysis, including the inherent electronegativity of the N species alongside shifting the Fermi level toward the conductive band. It was also shown that a significant drop occurs in the HER energy barrier on Ni2P/graphene compared to the pristine Ni2P due to N doping on the graphene layer in the Ni2P/N-doped graphene heterostructure.

Concurrent electrocatalytic hydrogen evolution and polyethylene terephthalate plastics reforming by self-supported amorphous cobalt iron phosphide electrode

The electrocatalytic hydrogen evolution reaction (HER) coupled with oxidative transformation of plastics into commodity chemical is a promising tactic to relieve the energy shortage and white pollution problems via sustainable and profitable manner, which necessitates highly active bifunctional catalytic electrode and meticulous construction of electrolysis system. Herein, a self-supported amorphous cobalt iron phosphide onto nickel foam (NF) substrate, labeled as CoFe-P/NF, was prepared by electrodeposition, which served as bifunctional catalytic electrode for alkali hydrogen evolution reaction (HER) and selective electrooxidation of polyethylene terephthalate (PET) plastic hydrolysate toward formate. Benefiting from the abundant catalytic sites within amorphous structure, the interelement synergy and sufficient exposure of catalyst to electrolyte, the self-supported CoFe-P/NF electrode displayed low overpotential (η100 of 168 mV at current density of J = 100 mA cm-2), decent stability for HER and fine tolerance to PET monomers. The CoFe-P/NF electrode could also catalyze selective electrooxidation of ethylene glycol (EG) component in PET hydrolysate to formate with high productivity (0.1 mmol cm-2h-1) and faradaic efficiency (FE, 90 %) at 1.5 V. The PET hydrolysate electrolysis system based on CoFe-P/NF enabled coproduction of H2 and value added formate at lower voltage (1.52 V at J = 20 mA cm-2) and energy consumption (84 % at J = 200 mA cm-2) relative to water electrolysis. This work showcases the coproduction of H2 fuel and formate by electrolysis of PET hydrolysate via rational design of bifunctional catalytic electrode. We believe such type of versatile catalytic electrodes can find application scenarios in electrosynthesis of more commodity chemicals and energy devices beyond the case herein.

Ligand and Strain Synergistic Effect in NiFeP0.32 LDH for Triggering Efficient Oxygen Evolution Reaction

Developing efficient water-splitting electrocatalysts to accelerate the slow oxygen evolution reaction (OER) kinetics is urgently desired for hydrogen production. Herein, ultralow phosphorus (P)-doped NiFe LDH (NiFePx LDH) with mild compressive strain is synthesized as an efficient OER electrocatalyst. Remarkably, NiFePx LDH with the phosphorus mass ratio of 0.32 wt.% and compressive strain ratio of 2.53% (denoted as NiFeP0.32 LDH) exhibits extraordinary OER activity with an overpotential as low as 210 mV, which is superior to that of commercial IrO2 and other reported P-based OER electrocatalysts. Both experimental performance and density function theory (DFT) calculation demonstrate that the doping of P atoms can generate covalent Fe─P coordination bonds and lattice distortion, thus resulting in the consequent depletion of electrons around the Fe active center and the downward shift of the d-band center, which can lead to a weaker adsorption ability of * O intermediate to improve the catalytic performance of NiFeP0.32 LDH for OER. This work provides novel insights into the distinctive coordinated configuration of P in NiFePx LDH, which can result in superior catalytic performance for OER.

Dopant-Induced Charge Redistribution on the 3D Sponge-like Hierarchical Structure of Quaternary Metal Phosphides Nanosheet Arrays Derived from Metal-Organic Frameworks for Natural Seawater Splitting

Dopant-induced electron redistribution on transition metal-based materials has long been considered an emerging new electrocatalyst that is expected to replace noble-metal-based electrocatalysts in natural seawater electrolysis; however, their practical applications remain extremely daunting due to their sluggish kinetics in natural seawater. In this work, we developed a facile strategy to synthesize the 3D sponge-like hierarchical structure of Ru-doped NiCoFeP nanosheet arrays derived from metal-organic frameworks with remarkable hydrogen evolution reaction (HER) performance in natural seawater. Based on experimental results and density functional theory calculations, Ru-doping-induced charge redistribution on the surface of metal active sites has been found, which can significantly enhance the HER activity. As a result, the 3D sponge-like hierarchical structure of Ru-NiCoFeP nanosheet arrays achieves low overpotentials of 52, 149, and 216 mV at 10, 100, and 500 mA cm-2 in freshwater alkaline, respectively. Notably, the electrocatalytic activity of the Ru-NiCoFeP electrocatalyst in simulated alkaline seawater and natural alkaline seawater is nearly the same as that in freshwater alkaline. This electrocatalyst exhibits superior catalytic properties with outstanding stability under a high current density of 85 mA cm-2 for more than 100 h in natural seawater, which outperforms state-of-the-art 20% Pt/C at high current density. Our work provides valuable guidelines for developing a low-cost and high-efficiency electrocatalyst for natural seawater splitting.

Experimental and Computational Insights into the Overall Water Splitting Reaction by the Fe-Co-Ni-P Electrocatalyst

Nonprecious transition-metal phosphides (TMPs) are versatile materials with tunable electronic and structural properties that could be promising as catalysts for energy conversion applications. Despite the facts, TMPs are not explored thoroughly to understand the chemistry behind their rich catalytic properties for the water splitting reaction. Herein, spiky ball-shaped monodispersed TMP nanoparticles composed of Fe, Co, and Ni are developed and used as efficient electrocatalysts for hydrogen and oxygen evolution reaction (HER, OER), and overall water splitting in alkaline medium; and their surface chemistry was explored to understand the reaction mechanism. The optimized Fe0.5CoNi0.5P catalyst shows attractive activities of HER and OER with low overpotentials and Tafel slopes, and with high mass activities, turnover frequencies, and exchange current densities. When applied to overall water splitting, the electrolyzer Fe0.5CoNi0.5P||Fe0.5CoNi0.5P cell can reach a 10 mA cm-2 current density at cell voltages of only 1.52 and 1.56 V in 1.0 M and 30 wt % KOH, respectively, much lower than those of commercial IrO2||Pt/C. The optimized electrolyzer with sizable numbers of chemically active sites exhibits superior durability up to 70 h and 5000 cycles in 1.0 M KOH and can attain a current density as high as 1000 mA cm-2, showing a class of efficient bifunctional electrocatalysis. Experimental and density functional theory-based mechanistic analyses reveal that surface reconstruction takes place in the presence of KOH to form the TMP precatalyst, which results in high coverage of oxygen active species for the OER with a low apparent activation energy (Ea) for conversion of *OOH to O2. These also evidenced the thermoneutral adsorption of H* for the efficient HER half-reaction.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Wet chemical synthesis of rhodium nanoparticles anchored on cobalt/nitrogen-doped carbon nanofibers for high-performance alkaline and acidic hydrogen evolution

Constructing high-activity electrocatalysts towards hydrogen evolution reaction (HER) is an essential way to achieve efficient, green and sustainable energy from water electrolysis. In this work, rhodium (Rh) nanoparticles anchored on cobalt (Co)/nitrogen (N)-doped carbon nanofibers (NCNFs) catalyst is prepared by the electrospinning-pyrolysis-reduction method. The synergy effect between Co-NCNFs and Rh nanoparticles contributes to the superior HER activity and favorable durability. The optimized 0.15Co-NCNFs-5Rh sample exhibits ultralow overpotentials of 13 and 18 mV to reach 10 mA cm-2 in an alkaline and acidic electrolyte, surpassing many Rh-based or Co-based electrocatalysts reported in the literature. Additionally, the Co-NCNFs-Rh sample shows a better HER activity than benchmark Pt/C catalyst in an alkaline medium at all current densities and in an acidic condition at higher current densities, offering its promising practical applications. Thus, this work provides an efficient methodology to construct high-performance HER electrocatalysts.

Heterogeneous Fe-Doped Ni(OH)2 Grown on Nickel Mesh by Electrodeposition for Efficient Alkaline Oxygen Evolution Reaction

Designing highly excellent and stable catalysts for alkaline oxygen evolution reaction (OER) is gradually pivotal for clean energy development. In this work, a heterogeneous Fe-doped Ni(OH)2 (Ni/Fe-0.1) was developed via simple one-step electrodeposition onto nickel mesh. The heterogeneous interface structure generates sufficient active sites, significantly improving OER performance with an overpotential of 174 mV at 10 mA cm-2 (η10 ), while Tafel slope is only 43.0 mV dec-1 . In particular, Ni/Fe-0.1 is still able to operate stably at a current density of 1 A cm-2 for 100 h without obvious potential decay. The oxidation of Ni2+ to Ni3+ was detected by X-ray photoelectron spectroscopy, proving that the heterogeneous catalyst could stabilize the high-valence state of nickel as active sites to its superior OER performance. This work provides a convenient synthetic strategy for forming heterogeneous catalysts toward efficient water electrolysis.

Chemically Etched Prussian Blue Analog-WS2 Composite as a Precatalyst for Enhanced Electrocatalytic Water Oxidation in Alkaline Media

The electrochemical water-splitting reaction is a promising source of ecofriendly hydrogen fuel. However, the oxygen evolution reaction (OER) at the anode impedes the overall process due to its four-electron oxidation steps. To address this issue, we developed a highly efficient and cost-effective electrocatalyst by transforming Co-Fe Prussian blue analog nanocubes into hollow nanocages using dimethylformamide as a mild etchant and then anchoring tungsten disulfide (WS2) nanoflowers onto the cages to boost OER efficiency. The resulting hybrid catalyst-derived oxide demonstrated a low overpotential of 290 mV at a current density of 10 mA cm-2 with a Tafel slope of 75 mV dec-1 in 1.0 M KOH and a high faradaic efficiency of 89.4%. These results were achieved through the abundant electrocatalytically active sites, enhanced surface permeability, and high electronic conductivity provided by WS2 nanoflowers and the porous three-dimensional (3D) architecture of the nanocages. Our research work uniquely combines surface etching of Co-Fe PBA with WS2 growth to create a promising OER electrocatalyst. This study provides a potential solution to the challenge of the OER in electrochemical water-splitting, contributing to UN SDG 7: Affordable and clean energy.

V-doped porous CoP nanoarrays grown on carbon cloth with optimized electronic structure for the hydrogen evolution reaction

As an efficient, renewable and clean energy, hydrogen is expected to replace traditional fossil fuel energy in the future. Currently, platinum-based materials (Pt) are excellent electrocatalysts for hydrogen evolution reaction (HER), but their high cost and low natural abundance limit their widespread application. Therefore, it is urgent to develop low-cost, highly efficient and earth-abundant electrocatalysts to replace the precious platinum-based materials. In this study, a Co-based organic framework (ZIF-67) was grown on a flexible substrate carbon cloth (CC), and a V-doped CoP nanoarray (V-CoP/CC) was prepared using a simple in situ ion exchange/phosphating method. Due to its unique porous structure, effective doping of V atoms and the in situ electrode construction, the V-CoP/CC exhibited high electrolytic hydrogen evolution reaction (HER) performance, with an overpotential of 98 mV at a current density of 10 mA cm-2. This work has important theoretical and practical significance for in situ construction of heteroatom-doped CoP electrodes.

A Little Nickel Goes a Long Way: Ni Incorporation into Rh2P for Stable Bifunctional Electrocatalytic Water Splitting in Acidic Media

In acidic media, many transition-metal phosphides are reported to be stable catalysts for the hydrogen evolution reaction (HER) but typically exhibit poor stability toward the corresponding oxygen evolution reaction (OER). A notable exception appears to be Rh2P/C nanoparticles, reported to be active and stable toward both the HER and OER. Previously, we investigated base-metal-substituted Rh2P, specifically Co2-xRhxP and Ni2-xRhxP, for HER and OER as a means to reduce the noble-metal content and tune the reactivity for these disparate reactions. In alkaline media, the Rh-rich phases were found to be most active for the HER, while base-metal-rich phases were found to be the most active for the OER. However, Co2-xRhxP was not stable in acidic media due to the dissolution of Co. In this study, the activity and stability of our previously synthesized Ni2-xRhxP nanoparticle catalysts (x = 0, 0.25, 0.50, 1.75) toward the HER and OER in acidic electrolyte are probed. For the HER, the Ni0.25Rh1.75P phase was found to have comparable geometric activity (overpotential at 10 mA/cmgeo2) and stability to Rh2P. In contrast, for OER, all of the tested Ni2-xRhxP phases had similar overpotential values at 10 mA/cmgeo2, but these were >2x the initial value for Rh2P. However, the activity of Rh2P fades rapidly, as does Ni2P and Ni-rich Ni2-xRhxP phases, whereas Ni0.25Rh1.75P shows only modest declines. Overall water splitting (OWS) conducted using Ni0.25Rh1.75P as a catalyst relative to the state-of-the-art (RuO2||20% Pt/C) revealed comparable stabilities, with the Ni0.25Rh1.75P system demanding an additional 200 mV to achieve 10 mA/cmgeo2. In contrast, a Rh2P||Rh2P OWS cell had a similar initial overpotential to RuO2||20% Pt/C, but is unstable, completely deactivating over 140 min. Thus, Rh2P is not a stable anode for the OER in acidic media, but can be stabilized, albeit with a loss of activity, by incorporation of nominally modest amounts of Ni.

Construct of an Electrodeposited Cobalt-Molybdenum Film and Evaluation of Its Efficiency in Hydrogen Evolution

Hydrogen is a valuable clean energy source, and electrolysis to produce hydrogen from water is a crucial component. However, a major problem of hydrogen generation by electrolysis is its large overpotential and poor economics. To reduce the overpotential, we mainly use nickel foam and Co-Mo ions as feedstock and create an efficient catalytic material by electrodeposition. The Co-Mo interaction improves the current efficiency. In 1 mol/L NaOH solution, the overpotential of the Co-Mo-NF composites was low when the current density is -10 mA/cm², with the best value reaching 45.3 mV, which is less than those of Co-NF (94.4 mV) and Mo-NF (88.2 mV). All deposits had similar Tafel slopes in the 77.9 mV/decade range. The catalyst does not just have a favorable effect on hydrogen formation but also has a surprisingly high double-layer capacitance (up to 180 mF/cm²) and good stability. This research provides an impactful approach for developing a non-precious metal HER catalyst for industrial hydrogen production.

Constructing interface engineering and tailoring a nanoflower-like FeP/CoP heterostructure for enhanced oxygen evolution reaction

The inexpensive and highly efficient electrocatalysts toward oxygen evolution reaction (OER) in water splitting electrolysis have displayed promising practical applications to relieve energy crisis. Herein, we prepared a high-yield and structurally regulated bimetallic cobalt-iron phosphide electrocatalyst by a facile one-pot hydrothermal reaction and subsequent low-temperature phosphating treatment. The tailoring of nanoscale morphology was achieved by varying the input ratio and phosphating temperature. Thus, an optimized FeP/CoP-1-350 sample with the ultra-thin nanosheets assembled into a nanoflower-like structure was obtained. FeP/CoP-1-350 heterostructure displayed remarkable activity toward the OER with a low overpotential of 276 mV at a current density of 10 mA cm^-2, and a low Tafel slope of only 37.71 mV dec^-1. Long-lasting durability and stability were maintained with the current with almost no obvious fluctuation. The enhanced OER activity was attributed to the presence of copious active sites from the ultra-thin nanosheets, the interface between CoP and FeP components, and the synergistic effect of Fe-Co elements in the FeP/CoP heterostructure. This study provides a feasible strategy to fabricate highly efficient and cost-effective bimetallic phosphide electrocatalysts.

Carbon-encapsulated Co2P/P-modified NiMoO4 hierarchical heterojunction as superior pH-universal electrocatalyst for hydrogen production

The development of hydrogen evolution reaction (HER) technology that operates stably in a wide potential of hydrogen (pH) range of electrolytes is particular important for large-scale hydrogen production. However, the rational design of low-cost and pH-universal electrocatalyst with high catalytic performance remains a huge challenge. Herein, Co₂P nanoparticles strongly coupled with P-modified NiMoO₄ nanorods are directly grown on nickel foam (NF) substrates through carbon layer encapsulation (denoted as C-Co₂P@P-NiMoO₄/NF) by hydrothermal, deposition, and phosphating processes. This novel kind of hierarchical heterojunction has abundant heterogeneous interfaces, strong electronic interactions, and optimized reaction kinetics, representing the highly-active pH-universal electrodes for HER. Remarkably, the C-Co₂P@P-NiMoO₄/NF catalyst shows excellent HER properties in acidic and basic electrolytes, where the overpotentials of 105 mV and 107 mV are applied to drive the current density of 100 mA cm^-2. In addition, a low overpotential of 177 mV at 100 mA cm^-2 along with high stability is realized in 1 M phosphate buffer solution (PBS), which is close to the state-of-the-art non-precious metal electrocatalysts. Our work not only provides a class of robust pH-universal electrocatalyst but also offers a novel way for the rational design of other heterogeneous materials bythe interface regulation strategy.

Hydrogel Polymer-PBA Nanocomposite Thin Film-Based Bifunctional Catalytic Electrode for Water Splitting: The Unique Role of the Polymer Matrix in Enhancing the Electrocatalytic Efficiency

A novel approach to efficient bifunctional catalytic electrodes for water splitting is developed, based on a counterintuitive choice of an insulating hydrogel polymer (chitosan, CS)-Prussian blue analogue (PBA, KCoFe) nanocomposite thin film on nickel foam. The polymer matrix in KCoFe-CS enables the formation of framelike structures of the non-noble metal-based catalyst nanocrystals, in addition to improving their stability. An optimized cycling protocol leads to a substantial enhancement of the electrocatalytic efficiency for oxygen evolution reaction (OER) as well as hydrogen evolution reaction (HER), achieving relatively low overpotentials of 272 and 320 mV (@ 10 and 20 mA cm^-2) and 146 mV (@ 10 mA cm^-2), respectively, reduced Tafel slopes, and increased Faradaic efficiencies of 98 and 96%; the overpotentials estimated based on the electrochemically active surface area show similar trends. The polymer encapsulation and the cycling protocol are key to the realization of the desirable combination of enhanced efficiency and stability demonstrated up to 50 h for both OER and HER. Detailed characterizations of the postcycling catalytic electrode show that favorable morphological changes of the polymer matrix with concomitant reduction in the PBA nanocrystal size lead to the enhanced activity. The bifunctional activity of the catalytic electrode is demonstrated by the stable water splitting achieved with a 20 mA cm^-2 current density at 1.55 V. The present study unravels the utility of hydrogel polymer matrices (without the use of binders like Nafion) in realizing sustainable water splitting electrocatalysts with high stability and efficiency, through the combined effect of confining the electrolyte within and favorably modifying the catalyst nanoparticles and the nanocomposite morphology.

Synthesis of Bimetallic Ni-Co Phosphide Nanosheets for Electrochemical Non-Enzymatic H2O2 Sensing

NiCoP nanosheets (NSs) were successfully synthesized using the hydrothermal and high-temperature phosphorization process. The obtained NiCoP NSs were immobilized on a glassy carbon electrode (GCE) and used to construct a novel sensing platform for electrochemical non-enzymatic H₂O₂ sensing. Physicochemical characteristics of NiCoP NSs were obtained by field-emission scanning electron microscopy (FESEM), field-emission transmission electron microscope (FETEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). In addition, the electrochemical properties of NiCoP NSs were obtained by cyclic voltammetry (CV) and chronoamperometry (CA) towards the non-enzymatic detection of H₂O₂. FESEM and FETEM images provided a morphological insight (the unique nanosheets morphology of NiCoP) that could expose more active sites to promote mass/charge transport at the electrode/electrolyte interface. XRD and XPS results also confirmed the crystalline nature of the NiCoP nanosheets and the coexistence of multiple transitional metal oxidation states in NiCoP nanosheets. These unique physicochemical characteristics had a degree of contribution to ensuring enhancement in the electrochemical behavior. As a result, the synthesized NiCoP NSs composed of intercalated nanosheets, as well as the synergistic interaction between bimetallic Ni/Co and P atoms exhibited excellent electrocatalytical activity towards H₂O₂ electroreduction at neutral medium. As the results showed, the electrochemical sensing based on NiCoP NSs displayed a linear range of 0.05~4 mM, a sensitivity of 225.7 μA mM^-1 cm^-2, a limit of detection (LOD) of 1.190 μM, and good selectivity. It was concluded that NiCoP NSs-based electrochemical sensing might open new opportunities for future construction of H₂O₂ sensing platforms.

Hollow NiCoP Nanoprisms Derived from Prussian Blue Analogues as Bifunctional Electrocatalysts for Urea-Assisted Hydrogen Production in Alkaline Media

Integrating the hydrogen evolution reaction (HER) and urea oxidation reaction (UOR) is an energy-saving approach for electrolytic H₂ production. Here, hollow NiCoP nanoprisms are derived from Prussian blue analogues by a combined self-template coordination reaction and gas-phase phosphorization strategy. Benefiting from the strong electron interaction, unique hollow nanostructure, and enhanced mass/charge transfer, NiCoP nanoprisms display outstanding alkaline HER and UOR performance. Specifically, low potentials of -0.052, -0.115, and -0.159 V for HER and ultralow potentials of 1.30, 1.36, and 1.42 V for UOR at current densities of 10, 50, and 100 mA cm^-2 are obtained. Moreover, in a urea-assisted water electrolysis system, NiCoP nanoprisms only require cell voltages of 1.36, 1.49, and 1.57 V to offer current densities of 10, 50, and 100 mA cm^-2 , about 170, 180, and 200 mV less than the traditional water electrolysis. Theoretical calculations indicate the Co substitution in Ni₂ P promotes the adsorption and dissociation of water molecules, optimizes the desorption energy of active hydrogen atoms, and enhances the adsorption of urea molecules, thus accelerating the kinetics of HER and UOR. This work facilitates the application of hollow bimetallic phosphides in electrochemical preparation of clean energy and provides a successful paradigm for urea-rich wastewater electrolysis.

Carbon-incorporated Ni2P-Fe2P hollow nanorods as superior electrocatalysts for the oxygen evolution reaction

A rational design and cost-effective transition metal-based hollow nanostructures are important for sustainable energy materials with high efficiency. This study reports on carbon-incorporated Ni₂P-Fe₂P hollow nanorods ((Ni,Fe)₂P/C HNRs) derived from a self-template approach as efficient electrocatalysts. Initially, a Ni₂(BDC)₂(DABCO)-MOF (Ni-MOF) is converted to NiFe-PBA hollow nanorods (HNRs) through facile ion exchange which was further converted to (Ni,Fe)₂P/C HNRs via a subsequent phosphidation process. The resulting (Ni,Fe)₂P/C HNRs exhibit remarkable activity for the oxygen evolution reaction in an alkaline solution requiring a small overpotential of 258 mV to drive a current density of 10 mA cm^-2 and long-term stability with little deactivation after 40 h. (Ni,Fe)₂P/C HNRs outperform (Ni,Fe)₂P/C NPs and commercial RuO₂. The unique hollow morphology and interfacial electronic structure substantially increase the active site and charge transfer rate of our electrocatalyst, resulting in excellent OER activity and stability.

Application of SERS in the Detection of Fungi, Bacteria and Viruses

In this review, we report the recent advances of SERS in fungi, bacteria, and viruses. Firstly, we briefly introduce the advantage of SERS over fluorescence on virus identification and detection. Secondly, we review the feasibility analysis of Raman/SERS spectrum analysis, identification, and fungal detection on SERS substrates of various nanostructures with a signal amplification mechanism. Thirdly, we focus on SERS spectra for nucleic acid, pathogens for the detection of viruses and bacteria, and furthermore introduce SERS-based microdevices, including SERS-based microfluidic devices, and three-dimensional nanostructured plasmonic substrates.

Recent advances in hollow nanomaterials with multiple dimensions for electrocatalytic water splitting

Electrocatalytic water splitting has great research prospects in the production of green hydrogen energy, and electrocatalysts are the prerequisite. As widely employed efficient electrocatalysts, hollow nanostructures have attracted a lot of research attention due to their excellent catalytic activity and structural stability. Moreover, the abundant catalytically active sites and tunable morphology also make hollow nanomaterials promising electrocatalysts for water splitting. Despite these advantages, the industrial applications of these hollow nanocatalysts are impeded by limitations like the lack of effective synthesis methods and unclear formation mechanisms. Therefore, extensive efforts have been devoted to the development of efficient synthesis strategies to boost the development of more efficient hollow electrocatalysts, and great progress has been achieved in recent years. To gain a better understanding of the rapid development of hollow nanocatalysts for water splitting, we herein organize a review to summarize the recent synthetic methods and advantages of hollow materials with different dimensions. The specific advantages of hollow nanomaterials in electrocatalytic water splitting, such as abundant active sites, a stable structure, high mass transfer efficiency, and reduced aggregation of catalytic particles, are also summarized. Finally, the challenges and prospects of hollow nanostructures with multiple dimensions in electrocatalytic water splitting are further explored.

Multimetallic transition metal phosphide nanostructures for supercapacitors and electrochemical water splitting

Transition metal phosphides (TMPs) have recently emerged as an important class of functional materials and been demonstrated to be outstanding supercapacitor electrode materials and catalysts for electrochemical water splitting. While extensive investigations have been devoted to monometallic TMPs, multimetallic TMPs have lately proved to show enhanced electrochemical performance compared to their monometallic counterparts, thanks to the synergistic effect between different transition metal species. This topical review summarizes recent advance in the synthesis of new multimetallic TMP nanostructures, with particular focus on their applications in supercapacitors and electrochemical water splitting. Both experimental reports and theoretical understanding of the synergy between transition metal species are comprehensively reviewed, and perspectives of future research on TMP-based materials for these specific applications are outlined.

Activated MoS2 by Constructing Single Atomic Cation Vacancies for Accelerated Hydrogen Evolution Reaction

Regulating the electronic structure of MoS2 by constructing cationic vacancies is an effective method to activate and improve its intrinsic properties. Herein, we synthesize the MoS2-based composite with abundant single atomic Mo cation vacancies through uniformly loading nickel-cobalt-Prussian blue analogues (NiCoPBA) (NiCoPBA-MoS2-VMo) by immersing a single Ni atom-decorated MoS2 (Ni-MoS2) into K3[Co(CN)6] solution. Subsequently, NiCoP-MoS2-VMo with improved conductivity is obtained by phosphating the composite as a high-efficiency hydrogen evolution reaction (HER) catalyst. Experiments and theoretical calculations indicate that the electrons of NiCoP are spontaneously transferred to the substrate MoS2-VMo nanosheets in NiCoP-MoS2-VMo, and the moderately oxidized NiCoP is beneficial to the adsorption of OH*. Meanwhile, the mono-atomic Mo cation vacancies of the catalyst modulate the electronic structure of S, optimizing the adsorption of hydrogen in the reaction process. Therefore, NiCoP-MoS2-VMo has enhanced chemical adsorption for H* (on MoS2-VMo) and OH*(on NiCoP), expediting the water-splitting step and HER catalysis, and benefiting from the regulation of the electronic structure induced by the construction of metallic Mo vacancies in MoS2, the as-prepared catalyst displays an overpotential of only 67 mV at 10 mA cm-2 with long-term stability (no current decay over 20 h). This work affords not only a kind of efficient HER catalysts but also a new valuable route for developing inexpensive and high-performance catalysts with single atomic cation vacancies.

Stoichiometry design in hierarchical CoNiFe phosphide for highly efficient water oxidation

Rational composition design of trimetallic phosphide catalysts is of significant importance for enhanced surface reaction and efficient catalytic performance. Herein, hierarchical Co _x Ni _y Fe _z P with precise control of stoichiometric metallic elements (x:y:z = (1-10):(1-10):1) has been synthesized, and Co_1.3Ni_0.5Fe_0.2P, as the most optimal composition, exhibits remarkable catalytic activity (η = 320 mV at 10 mA cm^-2) and long-term stability (ignorable decrease after 10 h continuous test at the current density of 10 mA cm^-2) toward oxygen evolution reaction (OER). It is found that the surface P in Co_1.3Ni_0.5Fe_0.2P was replaced by O under the OER process. The density function theory calculations before and after long-term stability tests suggest the clear increasing of the density of states near the Fermi level of Co_1.3Ni_0.5Fe_0.2P/Co_1.3Ni_0.5Fe_0.2O, which could enhance the OH^- adsorption of our electrocatalysts and the corresponding OER performance.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material is available in the online version of this article at 10.1007/s40843-022-2061-x.

Highly Effective OER Electrocatalysts Generated from a Two-Dimensional Metal-Organic Framework Including a Sulfur-Containing Linker without Doping

Metal-organic frameworks (MOFs) with different topologies formed by the self-assembly of sulfur-containing inorganic ligands, cobalt ions, and large ligands can be used to prepare electrocatalysts for water splitting in order to fully explore the advantages of MOFs in terms of structural tailoring and quantitative assembly. It is possible to avoid using an extradoped sulfur source to reduce waste as well as to disperse Co and sulfur elements evenly and controllably throughout the final material to maximize the overall synergistic effect. In this work, different kinds of bimetallic MOF materials containing sulfur can be synthesized very conveniently by using an economical and practical diffusion method. These materials are directly used as OER electrocatalysts, and the bimetallic MOFs have the best electrocatalytic performance when the ratio of Co to Fe is 6:4. The overpotential at a current density of 10 mA cm^-2 was 260 mV, with a Tafel slope of 56 mV dec^-1 and good stability. It was assembled with 20% commercial Pt/C material into a two-electrode system for all-water decomposition, and the decomposition voltage at 10 mA cm^-2 was 1.81 V. From the electronic configuration microscopic point of view, the introduction of iron ions changed the original synergistic effect for Co-S-Co, which more easily led to the formation of high-valence Co³⁺ and finally produced highly active electrocatalytic sites. From a macroscopic point of view, the material produced in situ during the electrochemical reaction process not only retains the original 2D layered structure but also utilizes bubbles to produce a loose structure with defective sites. These structural features are advantageous because they provide not only an abundance of active sites and permeable channels but also the necessary interfaces and electron-transport channels for the formation of electrostatic charge-separation layers, making it easier to intercalate and delaminate the hydroxide ions. Furthermore, the changed hydroxyl ions and nitrogen and sulfur atoms on the channel surface may operate as interaction sites, increasing the surface characteristics, facilitating electron transfer, and reducing electron-transfer resistance. To summarize, the rational design of sulfur-containing layered MOF materials directly as water-splitting catalysts is a crucial next step in developing cost-effective, environmentally friendly, and low-energy-consumption electrocatalysts based on the findings of this study.

In situ preparation of a Co4S3-based electrocatalyst by taking advantage of the controllable components of metal-organic frameworks

In order to give full play to the advantages in structure tailoring and quantitative assembly, metal-organic frameworks (MOFs) with different topological structures formed by the self-assembly of inorganic ligands containing sulfur, cobalt ions and large-size ligands were used to prepare electrocatalyst materials for hydrolysis with controllable composition and performance. According to the synthesis proposition, we can not only avoid using additional doped sulfur sources to reduce waste but also make it very convenient for Co and sulfur elements to be uniformly and controllably distributed in the whole material, and enhance the overall synergistic effects. Based on the above considerations, two-dimensional layered and three-dimensional MOFs, Co-MOF-1, and Co-MOF-2, with the same chemical compositions were utilized as the templates, and a series of Co/S-based materials with variable compositions and properties were obtained only by controlling the pyrolysis temperature. For each MOF series, it can be observed that with the increase in the pyrolysis temperature, the derivatives gradually change from Co₄S₃ to Co₉S₈ composites, which could be proven by PXRD studies. The electrocatalytic properties of two series of derivatives were also investigated, and the results indicate that the materials containing Co₄S₃ can indeed show better water-splitting performance than Co₉S₈ ones. Furthermore, the macroscopic stacking form of the MOF template also plays an important role in determining the electrocatalytic performance of the derived materials. Through an overall comparison, it is found that the electrocatalytic performance of the Co-MOF-1 series is better than that of the Co-MOF-2 series at various temperatures, which should be only caused by the natural packing modes of the pristine MOF template. For Co-MOF-1 derivatives, the retention of the two-dimensional layered structure is favorable to form an electrostatic charge separation layer and electron transport channel, which is beneficial to the intercalation and delamination of hydroxide ions, thus improving the storage capacity of materials, promoting electron transfer, and producing less electron transfer resistance. Therefore, based on the research results, the reasonable design of layered MOF materials containing the specific sulfur-containing linker as water-splitting catalysts is an applicable route for the preparation of economical, environmentally friendly, and low energy consumption electrocatalysts, which should receive increasing attention in the future.

Metal - organic frameworks derived Ni5P4/NC@CoFeP/NC composites for highly efficient oxygen evolution reaction

As an efficient non-precious metal catalyst for the oxygen evolution reaction (OER), phosphides suffer from poor electrical conductivity, so it is still a challenge to reasonably design their structures to further improve their conductivity and OER performances. Here, we present a novel Ni₅P₄/N-doped carbon@CoFeP/N-doped carbon composite (Ni₅P₄/NC@CoFeP/NC) as electrocatalysts for OER. This elaborate structure consists of Ni₅P₄/NC derived from Ni-MOF and CoFeP/NC derived from CoFe-Prussian blue analog MOF (Co-Fe PBA). The cube-like CoFeP/NC are scattered and uniformly coated on the sheet of Ni₅P₄/NC flowers. Among them, NC can enhance the conductivity of phosphides, while CoFeP/NC can increase the electrochemical active area, which benefit the properties of Ni₅P₄/NC@CoFeP/NC. Notably, the Ni₅P₄/NC@CoFeP/NC catalyst possesses outstanding OER performances with a low overpotential of 260 and 303 mV at a current density of 10 and 100 mA·cm^-2, an ultra-low Tafel slope of 31.1 mV·dec^-1 and excellent stability in 1 M KOH. XPS analysis shows that proper chemical composition promotes the oxidation of transition metal species and the chemisorption of OH^-, thus accelerating the OER kinetics. Therefore, this work provides a hopeful method for designing and preparing transition metal phosphide/carbon composite as OER electrocatalysts.

Porous P, Fe-doped g-C3N4 nanostructure with enhanced photo-Fenton activity for removal of tetracycline hydrochloride: Mechanism insight, DFT calculation and degradation pathways

This study fabricated an efficient P and Fe co-doping graphitic carbon nitride catalyst (Fe- CN/P) by thermal polymerization of melamine, FeCl₃, and 2-hydroxyphosphonoacetic acid (HPAA) mixture. The Fe-CN/P catalyst exhibited much better tetracycline hydrochloride (TCH) degradation performance than that of single doping and neat CN. Various characterizations indicated that the introduction of HPAA significantly increased the specific surface area of CN and improved charge separation as well as transfer efficiency. Based on Fe 2p XPS analysis and indirect determination of hydroxyl radical (·OH) content, the separated photogenerated electrons accelerated the reduction of Fe(III) and activated photo-Fenton reaction, resulting in more ·OH species generation. The effect of pH value, catalyst dosages, H₂O₂ concentration, the type of cations and anions as well as water matrices on the degradation of TCH by Fe-CN/P was systematically investigated. The main degradation pathways of TCH were proposed according to the LC-MS intermediates detection and DFT calculation. The results indicated that reactive oxide species (ROS) were more likely to attack the atoms with high Fukui index (f⁰). This work provides new ideas for adjusting the morphology and electronic structure of CN to enhance its photo-Fenton catalytic activity.

MOF-on-MOF Strategy to Construct a Nitrogen-Doped Carbon-Incorporated CoP@Fe-CoP Core-Shelled Heterostructure for High-Performance Overall Water Splitting

The design and preparation of efficient and low-cost catalysts for water electrolysis are crucial and highly desirable to produce eco-friendly and sustainable hydrogen fuel. Herein, we prepared nitrogen-doped carbon-incorporated CoP@Fe-CoP core-shelled nanorod arrays grown on Ni foam (CoP@Fe-CoP/NC/NF) through phosphorization of ZIF-67@Co-Fe Prussian blue analogue (ZIF-67@CoFe-PBA). The hierarchical nanorod arrays combined with the core-shelled structure offer favorable mass/electron transport capacity and maximize the active sites, thus enhancing the electrochemically active surface area. The synergistic effect of the bimetallic components and the nitrogen-doped carbon matrix endow the composite with an optimized electronic structure. Benefiting from the above superiorities of morphological and chemical compositions, this self-supported CoP@Fe-CoP/NC/NF heterostructure can drive alkaline hydrogen evolution reaction and oxygen evolution reaction with overpotentials of 97 and 270 mV to yield 100 mA cm^-2, respectively. The two-electrode alkaline electrolyzer constructed by this heterostructure shows a low cell voltage of 1.58 V to yield 10 mA cm^-2, superior to the precious-metal-based electrocatalyst apparatus (IrO₂∥Pt/C). This study offers a feasible and facile approach to develop efficient electrocatalysts for water electrolysis, which applies to other electrochemical energy conversion and storage applications.

Construction of Fe-doped CoP with hybrid nanostructures as a bifunctional catalyst for overall water splitting

Due to their open skeleton structures, adjustable active sites and homogeneous catalytic centers, PBA-based materials have promising applications in electrochemical water splitting. Herein, we report a PBA derived Fe_0.25-CoP electrocatalyst with a hybrid nanostructure, which offered a large specific surface area and active sites for the HER and OER, respectively. The as-synthesized Fe_0.25-CoP catalyst exhibits remarkable catalytic performance and durability at overpotentials of 262 mV for the OER and 111 mV for the HER, requiring a voltage of merely 1.57 V to achieve a current density of 10 mA cm^-2 for the electrocatalytic water splitting process. The preeminent activity of Fe_0.25-CoP was mainly ascribed to the framework structures of Co-PBA and appropriate doping of Fe³⁺ which regulated the electronic structures and morphology of Fe_0.25-CoP. In addition, the partial phosphating strategy retained the active centers for the OER in Co-PBA, which were further enhanced by the catalysis of Fe³⁺. In short, the rational design and regulation of catalyst structures and compositions is a promising approach for the development of highly efficient water splitting catalysts.

Promoting ethylene production over a wide potential window on Cu crystallites induced and stabilized via current shock and charge delocalization

Electrochemical CO₂ reduction (CO₂RR) in a product-orientated and energy-efficient manner relies on rational catalyst design guided by mechanistic understandings. In this study, the effect of conducting support on the CO₂RR behaviors of semi-conductive metal-organic framework (MOF) - Cu₃(HITP)₂ are carefully investigated. Compared to the stand-alone MOF, adding Ketjen Black greatly promotes C₂H₄ production with a stabilized Faradaic efficiency between 60-70% in a wide potential range and prolonged period. Multicrystalline Cu nano-crystallites in the reconstructed MOF are induced and stabilized by the conducting support via current shock and charge delocalization, which is analogous to the mechanism of dendrite prevention through conductive scaffolds in metal ion batteries. Density functional theory calculations elucidate that the contained multi-facets and rich grain boundaries promote C-C coupling while suppressing HER. This study underlines the key role of substrate-catalyst interaction, and the regulation of Cu crystalline states via conditioning the charge transport, in steering the CO₂RR pathway.

A novel worm-like micelles@MOFs precursor for constructing hierarchically porous CoP/N-doped carbon networks towards efficient hydrogen evolution reaction

Constructing electrocatalysts with plentiful active sites, great mass transfer ability, and high electrical conductivity is critical to realize efficient hydrogen evolution reaction (HER). Hierarchically porous cobalt phosphide/N-doped nanotubular carbon networks (CoP/NCNs) that have all the features were fabricated in this work. For the fabrication, the polymeric worm-like micelles (PWs) with a large aspect ratio were coated by a uniform nanolayer of Zn-Co zeolitic imidazolate frameworks (Zn-Co-ZIFs) on their surface, resulting in the hybrid nanofibers PWs@Zn-Co-ZIFs (HPWs). Inheriting the randomly curved and entanglement properity of PWs, the rigid HPWs formed hybrid networks with the packing voids sized tens to 200 nm. Then, the hybrid networks were treated by pyrolysis-oxidation-phosphidation and ZnO-removal processes, leading to the hierarchically porous CoP/NCNs. In the CoP/NCNs, there are plentiful CoP nanoparticles embedded on the surface of conductive carbon network and fully exposed. When used for HER electrocatalyst, the CoP/NCNs only need small overpotentials (98 and 118 mV in acid and alkaline electrolyte) at 10 mA cm^-2. This novel strategy is instructive for tailoring hierarchically porous transition metal phosphide/carbon nanocomposites as promising electrocatalysts.

Nanowire-structured FeP-CoP arrays as highly active and stable bifunctional electrocatalyst synergistically promoting high-current overall water splitting

The design and construction of highly efficient and durable non-noble metal bifunctional catalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline media is essential for developing the hydrogen economy. To achieve this goal, we have developed a bifunctional nanowire-structured FeP-CoP array catalyst on carbon cloth with uniform distribution through in-situ hydrothermal growth and phosphating treatment. The unique nanowire array structure and the strong electronic interaction between FeP and CoP species have been confirmed. Electrochemical studies have found that the designed Fe_0.14Co_0.86-P/CC catalyst appears excellent HER (130 mV@10 mA cm^-2)/OER (270 mV@10 mA cm^-2) activity and stability. Moreover, the bifunctional Fe_0.14Co_0.86-P/CC^(+/-) catalyst is also used in simulated industrial water splitting system, where the pair catalyst requires about 1.95 and 2.14 V to reach 500 and 1000 mA cm^-2, even superior to the control RuO₂⁽⁺⁾||Pt/C^(-) catalyst, showing good industrial application prospects. These excellent electrocatalytic properties are attributed to the synergy between FeP and CoP species as well as the unique microstructure, which can accelerate charge transfer, expose more active sites and enhance electrolyte diffusion and gas emissions.

Phosphorus-decorated Mo-MXene/CQD hybrid: a 2D/0D architecture for bifunctional electrochemical water splitting

The exploration of nonprecious metal-based 2D bifunctional electrocatalysts is of great significance for transforming to sustainable energies in terms of hydrogen. However, to achieve commendable electrocatalytic performance via rational design of surface-interface-engineered Mo-MXene hybrids remain challenging and highly demanding. Herein, we report large size exfoliated Mo-MXene sheets, which provide a flat flexible interface for decoration with carbon quantum dots (CQDs) and controlled surface phosphorization (denoted as Mo-MX/C/P hybrid). The resulting Mo-MX/C/P hybrid exhibited the lowest onset potentials of 14 and 58 mV at an applied current of 0.2 mA cm^-2 for the HER and OER, respectively. Strikingly, the electronegative nature of phosphorous (P) and quick charge transfer between the CQDs and Mo₂CTx matrix were responsible for its superior catalytic activities. Despite the superior performance, the Mo-MX/C/P hybrid can also be used for full-cell division of water with a cell voltage of 1.34 volts at 10 mA cm^-2 and was found to be durable up to 12. This work provides a novel insight into the further development of surface-interface-engineered Mo-MXene hybrids for sustainable energy.

Interfacial electronic modification of bimetallic oxyphosphides as Multi-functional electrocatalyst for water splitting and urea electrolysis

Electrochemical water or wastewater splitting is a sustainable development approach for both hydrogen generation and pollutant elimination. Herein, an N-engineering ultrathin bimetallic oxyphosphides nanosheets on Ni foam (CoNiOP/NF) as a multi-functional binder-free electrode was synthesized for hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and urea oxidation reaction (UOR). The catalytic activity of the composites could be improved through introducing N-doping via an in-situ transformation and heterogeneous metals by ion exchange. Both theoretical calculation and experimental investigations confirmed that electrons transferred from metal centers to anion at the interface, which was favor to accelerate the phase transformation to electrochemically active species and optimize the intermediates adsorption dynamics, thus providing greatly enhanced electrocatalytic activities. Assembled an electrolyzer using UOR replaced OER, it required only 1.42 V to achieve 50 mA cm^-2 with long-term stability, 214 mV less than that required for HER‖OER. This work would be beneficial for the exploitation of non-noble metal-based electrocatalysts for simultaneous realization of energy-saving urea-assisted electrolytic hydrogen production and urea-containing wastewater purifying.