Structural control of polyelectrolyte/microemulsion droplet complexes (PEMECs) with different polyacrylates

Dual Semi-Interpenetrating Networks of Water-Soluble Macromolecules and Supramolecular Polymer-like Chains: The Role of Component Interactions

Dual networks formed by entangled polymer chains and wormlike surfactant micelles have attracted increasing interest in their application as thickeners in various fields since they combine the advantages of both polymer- and surfactant-based fluids. In particular, such polymer-surfactant mixtures are of great interest as novel hydraulic fracturing fluids with enhanced properties. In this study, we demonstrated the effect of the chemical composition of an uncharged polymer poly(vinyl alcohol) (PVA) and pH on the rheological properties and structure of its mixtures with a cationic surfactant erucyl bis(hydroxyethyl)methylammonium chloride already exploited in fracturing operations. Using a combination of several complementary techniques (rheometry, cryo-transmission electron microscopy, small-angle neutron scattering, and nuclear magnetic resonance spectroscopy), we showed that a small number of residual acetate groups (2-12.7 mol%) in PVA could significantly reduce the viscosity of the mixed system. This result was attributed to the incorporation of acetate groups in the corona of the micellar aggregates, decreasing the molecular packing parameter and thereby inducing the shortening of worm-like micelles. When these groups are removed by hydrolysis at a pH higher than 7, viscosity increases by five orders of magnitude due to the growth of worm-like micelles in length. The findings of this study create pathways for the development of dual semi-interpenetrating polymer-micellar networks, which are highly desired by the petroleum industry.

Preparation, Physicochemical Characterization, and Stability Study of Lippia origanoides Essential Oil-based Nanoemulsion as a Topical Delivery System

INTRODUCTION

Fungal diseases are a priority in research, development, and health care, according to the WHO, mainly due to Candida spp. Essential oils (EOs) of the genus Lippia have demonstrated broad antimicrobial biological activity. Previous studies identified the anti-Candida potential of a thymol/p-cymene chemotype EO from Lippia origanoides H.B.K coded "0018". Nanoemulsions favor the biological activity of EOs and overcome limitations such as low solubility, instability against oxidizing agents, pH, light, and low permeability. To develop, characterize, and adjust a prototype of an O/W nanoemulsion containing the "0018" EO from Lippia origanoides for its evaluation in an in vitro permeability study.

METHODS

Nanoemulsions were obtained using a high energy high shear method. Their particle size distribution, Z potential, viscosity, pH, encapsulation efficiency (EE), thermodynamic stability and the Turbiscan Stability Index (TSI) were evaluated. The nanoemulsion prototype was adjusted to improve performance characteristics and microbiological efficacy. Thymol was used as an analyte in the EO quantification using UHPLC-DAD.

RESULTS

An O/W nanoemulsion with hydrodynamic diameter <200 nm and polydispersity index <0.3, EE >95%, with TSI < 1.5, anti-Candida albicans efficiency >95% was obtained; permeable with a flow of 6.0264 μg/cm2/h and permeability coefficient of 1.3170x10-3 cm/h.

CONCLUSION

A pharmaceutical formulation prototype is obtained that maintains the physical and physicochemical characteristics over time. Permeability is verified in an in-vitro model. It is proposed to evaluate its antifungal activity in preclinical or clinical studies as a contribution to the treatment of topical fungal diseases caused by Candida spp., through the use of biological resources and Colombian biodiversity.

An experimental workflow to assess the applicability of microemulsions for conformance improvement in oil-bearing reservoir

A comprehensive workflow approach is necessary to link multiple experimental tasks and identify microemulsion (ME) formulations with 'optimal' stability, displacement behavior and technical feasibility in the petroleum industry. In this paper, a systematic approach is described with the aid of a case study which involves the formulation of an anionic sodium dodecyl sulfate-based microemulsion. The design of such ME systems requires a proper methodology, substantial laboratory work, and functional assessment from research/industrial viewpoints. The surfactant has been screened in terms of its micellization potential, followed by phase behavior analysis and Winsor classification of prepared microemulsions. The desired composition(s) are characterized via several tools to determine droplet size, morphology, oil/water solubilization potentials and salinity scan results. The suitability of the microemulsion system for conformance improvement technology (CIT) is proposed to be assessed via physicochemical evaluation studies encompassing two attributes: rheology and stability. For a favorable 'conforming' drive, the microemulsion must exhibit phase stability, sufficient injectivity, and moderate-to-high viscosity under shear. Technical assessment by the industry and research team must also include factors related to cost, availability of chemicals, environmental degradation, and reservoir considerations. The article demonstrates a comprehensive all-inclusive workflow methodology to design and formulate surfactant-stabilized microemulsions via case study analysis for application in CIT. This represents a sound approach to identifying efficient, cost-effective injection fluid systems and provides a framework to identify useful parameters for ME formulation design and employ the proposed (effective) strategy for conformance control.

Unusual Aspects of Charge Regulation in Flexible Weak Polyelectrolytes

This article reviews the state of the art of the studies on charge regulation (CR) effects in flexible weak polyelectrolytes (FWPE). The characteristic of FWPE is the strong coupling of ionization and conformational degrees of freedom. After introducing the necessary fundamental concepts, some unconventional aspects of the the physical chemistry of FWPE are discussed. These aspects are: (i) the extension of statistical mechanics techniques to include ionization equilibria and, in particular, the use of the recently proposed Site Binding-Rotational Isomeric State (SBRIS) model, which allows the calculation of ionization and conformational properties on the same foot; (ii) the recent progresses in the inclusion of proton equilibria in computer simulations; (iii) the possibility of mechanically induced CR in the stretching of FWPE; (iv) the non-trivial adsorption of FWPE on ionized surfaces with the same charge sign as the PE (the so-called "wrong side" of the isoelectric point); (v) the influence of macromolecular crowding on CR.

Polyelectrolyte-Surfactant Complexes As a Formulation Tool for Drug Delivery

Aqueous polyelectrolyte-surfactant complexes (PESCs) are very rich with respect to their properties and the structures formed by them. By design they normally contain hydrophobic micellar surfactant aggregates complexed by long polyelectrolyte chains, thereby combining the formation of small hydrophobic domains given by the surfactant with large-scale structuring due to the presence of the polyelectrolyte chain. In addition, they contain highly polar regions of surfactant head groups in contact with polyelectrolyte, forming a shell around the micellar aggregates, which often also possesses a certain hydrophobic character. Accordingly, the ability for solubilization of water-insoluble compounds of different sorts is particularly versatile in PESCs. Their solubilization sites with very different polarities and hydrophobic characters make them very flexible in adapting to the requirements of a given drug molecule. This renders them attractive for potential applications in drug delivery. In addition, modification of the rheological properties via self-assembly and network formation can be very important in PESC applications. In the following, we discuss the structures of PESCs and their properties, with a focus on the solubilization properties. Subsequently, examples are described where PESCs have been employed in the context of drug solubilization and delivery. These comprise examples with individual aggregates, cross-linked hydrogels, and ones taking advantage of the high solubilization capacity of microemulsions.

Single-molecule studies reveal the distinction of strong and weak polyelectrolytes in aqueous solutions

Polyelectrolytes are an important class of functional polymers that have the advantages of both polymers and electrolytes due to the presence of charges, and have prospective applications in many fields. The charge of the backbone is an important factor affecting the properties of polyelectrolytes. Therefore, the complex interactions caused by the charges in polyelectrolyte solutions pose a challenge to the study of polyelectrolyte systems, and there is no consensus on the distinction between the behavior of strong and weak polyelectrolytes in solution. Based on single-molecule force spectroscopy (SMFS), the distinction of strong and weak polyelectrolytes is clarified for the first time at the single molecular level by comparing the single-chain elasticity in different environments. It is expected that the single-molecule study will provide the theoretical and experimental basis for the further application of polyelectrolytes.

Using Microemulsions: Formulation Based on Knowledge of Their Mesostructure

Microemulsions, as thermodynamically stable mixtures of oil, water, and surfactant, are known and have been studied for more than 70 years. However, even today there are still quite a number of unclear aspects, and more recent research work has modified and extended our picture. This review gives a short overview of how the understanding of microemulsions has developed, the current view on their properties and structural features, and in particular, how they are related to applications. We also discuss more recent developments regarding nonclassical microemulsions such as surfactant-free (ultraflexible) microemulsions or ones containing uncommon solvents or amphiphiles (like antagonistic salts). These new findings challenge to some extent our previous understanding of microemulsions, which therefore has to be extended to look at the different types of microemulsions in a unified way. In particular, the flexibility of the amphiphilic film is the key property to classify different microemulsion types and their properties in this review. Such a classification of microemulsions requires a thorough determination of their structural properties, and therefore, the experimental methods to determine microemulsion structure and dynamics are reviewed briefly, with a particular emphasis on recent developments in the field of direct imaging by means of electron microscopy. Based on this classification of microemulsions, we then discuss their applications, where the application demands have to be met by the properties of the microemulsion, which in turn are controlled by the flexibility of their amphiphilic interface. Another frequently important aspect for applications is the control of the rheological properties. Normally, microemulsions are low viscous and therefore enhancing viscosity has to be achieved by either having high concentrations (often not wished for) or additives, which do not significantly interfere with the microemulsion. Accordingly, this review gives a comprehensive account of the properties of microemulsions, including most recent developments and bringing them together from a united viewpoint, with an emphasis on how this affects the way of formulating microemulsions for a given application with desired properties.

Dynamics in polyelectrolyte/microemulsion complexes

Oil-in-water (O/W) microemulsion droplets are convenient carriers for hydrophobic molecules in an aqueous phase and are used for a wide range of applications. We studied weakly charged O/W microemulsion droplets complexed with oppositely charged polyacrylates that form long linear arrangements of droplets. All samples showed rather low viscosities, which is in contrast to similar systems of hydrophobically interconnected droplets. Here, we applied small-angle neutron scattering, dynamic light scattering and neutron spin-echo spectroscopy to characterise the dynamic properties of polyacrylate/microemulsion complexes in order to understand the origin of the low-viscous behaviour. We found that the electrostatic interactions lead to very dynamic complexes with high exchange rates of droplets and only a fraction of the droplets is contained within the transient complexes at a given time. These results were only accessible by the combination of different methods as one method alone would have given an incomplete picture.

On Complex Coacervate Core Micelles: Structure-Function Perspectives

The co-assembly of ionic-neutral block copolymers with oppositely charged species produces nanometric colloidal complexes, known, among other names, as complex coacervates core micelles (C3Ms). C3Ms are of widespread interest in nanomedicine for controlled delivery and release, whilst research activity into other application areas, such as gelation, catalysis, nanoparticle synthesis, and sensing, is increasing. In this review, we discuss recent studies on the functional roles that C3Ms can fulfil in these and other fields, focusing on emerging structure-function relations and remaining knowledge gaps.

Interaction of Low Molecular Weight Poly(diallyldimethylammonium chloride) and Sodium Dodecyl Sulfate in Low Surfactant-Polyelectrolyte Ratio, Salt-Free Solutions

Coacervation is widely used in formulations to induce a beneficial character to the formulation, but nonequilibrium effects are often manifest. Electrophoretic NMR (eNMR), pulsed-gradient spin-echo NMR (PGSE-NMR), and small-angle neutron scattering (SANS) have been used to quantify the interaction between low molecular cationic poly(diallyldimethylammonium chloride) (PDADMAC) and the anionic surfactant sodium dodecyl sulfate (SDS) in aqueous solution as a model for the precursor state to such nonequilibrium processes. The NMR data show that, within the low surfactant concentration one-phase region, an increasing surfactant concentration leads to a reduction in the charge on the polymer and a collapse of its solution conformation, attaining minimum values coincident with the macroscopic phase separation boundary. Interpretation of the scattering data reveals how the rodlike polymer changes over the same surfactant concentration window, with no discernible fingerprint of micellar type aggregates, but rather with the emergence of disklike and lamellar structures. At the highest surfactant concentration, the emergence of a weak Bragg peak in both the polymer and surfactant scattering suggests these precursor disk and lamellar structures evolve into paracrystalline stacks which ultimately phase separate. Addition of the nonionic surfactant hexa(ethylene glycol) monododecyl ether (C₁₂E₆) to the system seems to have little effect on the PDADMAC/SDS interaction as determined by NMR, merely displacing the observed behavior to lower SDS concentrations, commensurate with the total SDS present in the system. In other words, PDADMAC causes the disruption of the mixed SDS/C₁₂E₆ micelle, leading to SDS-rich PDADAMC/surfactant complexes coexisting with C₁₂E₆-rich micelles in solution.